Synthesis and characterization of poly(cyclohexane 2,2-dipropargyl-1,3-propylene ketal) containing double spiro structure

The Polymerization was carried out by MoCl₅ and WCl₆ associated with various organo-metallic cocatalysts. MoCl₅-based catalysts were found to be more effective. Polymerization of monomer containing a spiro structure proceeded rapidly to reach 80% yield within 2 h at 30°C. Polymerization of monomer led to a soluble, purple colored polymer with number average molecular weight (M_n) of 50000. Elemental analysis, ¹H-NMR, ¹³C-NMR, IR, and UV-visible spectra of the resulting polymer indicated that the polymer contains alternating double and single bonds along the polymer backbone and a cyclic recurring unit with a double spiro structure. In addition, the polymer had good oxidative and thermal stability and good solubility in common organic solvents. © 1995 John wiley & Sons, Inc.     

Electrolytic conductivity of poly(1,3-propylene phosphate) solutions containing mono- and divalent-counterions

The results of conductivity measurements for aqueous solutions of poly(1,3-propylene phosphate) (PPP), which can be considered as a synthetic analogue of naturally occurring teichoic acids, are reported. Experiments were carried out with oligomeric fractions of a polymer in acidic, sodium, potassium, magnesium and calcium forms. The concentration and molecular weight dependence of the equivalent conductivity of PPP was analysed and the limiting equivalent conductivity determined. From the conductivity data, the polyion-counterion interaction parameter F and the equivalent conductivity of a polyion _p were calculated. It was shown that both F and _p depend on polyelectrolyte solution concentration and molecular weight of PPP. Conclusions concerning mono- and divalent metal ions binding to PPP are drawn.     

Step-scan TMDSC and high rate DSC study of the multiple melting behavior of poly(1,3-propylene terephthalate)

The multiple melting behavior of poly(1,3-propylene terephthalate) (PPT) samples after isothermal crystallization from the melt was studied. The step-scan temperature-modulated differential scanning calorimetry (TMDSC) and high rate DSC were used to investigate this behavior in conjunction with standard DSC, wide-angle X-ray diffraction (WAXD) and polarizing light microscopy (PLM). The effect of PPT average molecular weight on the melting was also examined. In general multiple endotherms after isothermal crystallization of PPT were attributed to a continuous crystal perfection process during the subsequent heating scan via melting-recrystallization-remelting. Multiple melting behavior was more pronounced for the low molecular weight PPT. Step-scan TMDSC showed that extensive recrystallization occurs in PPT samples, especially after rapid isothermal crystallization. In fact two recrystallization exothermic peaks were observed. High rate DSC revealed the initial morphology generated during the isothermal step and showed that the low and middle peaks are associated with melting of primary crystals while the high temperature peak should be attributed to melting of recrystallized material.     

Hydrophilic–hydrophobic AB diblock copolymers containing poly(trimethylene carbonate) and poly(ethylene oxide) blocks

AB‐type block copolymers with poly(trimethylene carbonate) [poly(TMC); A] and poly(ethylene oxide) [PEO; B; number‐average molecular weight (M_n) = 5000] blocks [poly(TMC)‐b‐PEO] were synthesized via the ring‐opening polymerization of trimethylene carbonate (TMC) in the presence of monohydroxy PEO with stannous octoate as a catalyst. M_n of the resulting copolymers increased with increasing TMC content in the feed at a constant molar ratio of the monomer to the catalyst (monomer/catalyst = 125). The thermal properties of the AB diblock copolymers were investigated with differential scanning calorimetry. The melting temperature of the PEO blocks was lower than that of the homopolymer, and the crystallinity of the PEO block decreased as the length of the poly(TMC) blocks increased. The glass‐transition temperature of the poly(TMC) blocks was dependent on the diblock copolymer composition upon first heating. The static contact angle decreased sharply with increasing PEO content in the diblock copolymers. Compared with poly(TMC), poly(TMC)‐b‐PEO had a higher Young's modulus and lower elongation at break. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4819–4827, 2005     

Phase behavior in copolymer blends of poly (p-chlorostyrene-co-o-chlorostyrene) and phenylsulfonylated poly (2,6-dimethyl-1,4-phenylene oxide)

The miscibility of random copolymers of o-chlorostyrene and p-chlorostyrene [P (oClSt-co-pClSt)] with partially phenylsulfonylated poly (2,6-dimethyl-1,4-phenylene oxide) (SPPO) copolymers has been studied, using differential scanning calorimetry (DSC) to establish T_g behavior. It already has been established that the isomeric effect of the chlorine substitution on miscibility is large. Thus the para-chloro-substituted styrenic homopolymer is miscible with all SPPOs containing more than ～ 5 mol % phenylsulfonylation, whereas the ortho-chloro-substituted homopolymer is immiscible with the entire range of SPPO copolymer compositions (and also with the respective homopolymers). As a result of this asymmetric behavior of the homopolymers, the width of the window of miscibility in blends now investigated containing copolymers with high pClSt content and SPPO is much greater than in the corresponding blends containing copolymers with large mole fraction of oClSt. These differences are reflected in the corresponding χ parameters calculated from analysis of the data. It was also found that the miscibility is temperature dependent and that the regime in the copolymer-copolymer composition plane shrank as the equilibrium temperature increased, results indicative of LCST behavior. © 1994 John Wiley & Sons, Inc.     

Association of poly(4-hydroxystyrene)-block-poly(ethylene oxide) in aqueous solutions: block copolymer nanoparticles with intermixed blocks

Association behavior of diblock copolymer poly(4-hydroxystyrene)-block-poly(ethylene oxide) (PHOS-PEO) in aqueous solutions and solutions in water/tetrahydrofuran mixtures was studied by static, dynamic, and electrophoretic light scattering, (1)H NMR spectroscopy, transmission electron microscopy, and cryogenic field-emission scanning electron microscopy. It was found that, in alkaline aqueous solutions, PHOS-PEO can form compact spherical nanoparticles whose size depends on the preparation protocol. Instead of a core/shell structure with segregated blocks, the PHOS-PEO nanoparticles have intermixed PHOS and PEO blocks due to hydrogen bond interaction between -OH groups of PHOS and oxygen atoms of PEO and are stabilized electrostatically by a fraction of ionized PHOS units on the surface.     

Restricted self-diffusion in an aqueous solution of poly(ethylene oxide) poly(propylene oxide) poly(ethylene oxide) triblock copolymer

 The self-diffusion behavior of a triblock copolymer (PEO–b– PPO–b–PEO) in an aqueous solution of 20% (m/m) was investigated during a temperature-induced phase transition from liquid to gel state using pulsed field gradient NMR and static light scattering. The measured self-diffusivity shows a strong dependence on the observation time in the gel phase indicating the existence of diffusion barriers in the size range of about 0.6 μm. Additional static light-scattering measurements show a structure in the same size range of several hundred nanometers, which is far above molecular or micellar sizes and thus, has to be caused by larger clusters. The similarity in the space scales suggests that the restriction of molecular propagation is correlated with the grain boundaries between the domains of the poly-crystalline structure formed by the arranged micelles. Received: 28 October 1996 Accepted: 21 March 1997     

Effect of sodium chloride on association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer in aqueous solutions

The effect of sodium chloride (NaCl) upon the thermally induced association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymer, Pluronic P103, has been investigated using pyrene fluorescence spectroscopy. The critical micellization temperature (CMT) of Pluronic P103 in aqueous solution is decreased by the addition of NaCl. The standard enthalpy and entropy of micellization for Pluronic P103 in water are increased in the presence of small amounts of NaCl, but further addition of NaCl decreases the standard enthalpy and entropy of micellization. The I1/I3 ratio of pyrene in aqueous Pluronic P103 solutions at temperature below the CMT decreases with increases of NaCl concentration, which is related to the decrease of PPO solubility. The decrease in polarity of the PPO shifts the CMT toward lower temperature.     

Preparation and solution behavior of a thermoresponsive diblock copolymer of poly(ethyl glycidyl ether) and poly(ethylene oxide)

A thermoresponsive diblock copolymer, poly(ethyl glycidyl ether)-block-poly(ethylene oxide) (PEGE-b-PEO), is synthesized by successive anionic ring-opening polymerization of ethyl glycidyl ether and ethylene oxide using 2-phenoxyethanol as a starting material, and its solution behavior is elucidated in water. In a dilute 1 wt % solution, the temperature-dependent alteration in the polymer hydrodynamic radius (RH) is measured in the temperature range between 5 and 45 degrees C by pulse-gradient spin-echo NMR and dynamic light scattering. The RH value increased with temperature in two steps, where the first step at 15 degrees C corresponds to the core-shell micelle formation and the second step at 40 degrees C corresponds to the aggregation of the core-shell micelles. The formation of the core-shell micelles is supported by the solubilization of a dye (1,6-diphenyl-1,3,5-hexatriene) in the hydrophobic core, which is recognized for a copolymer solution in the temperature range between 20 and 40 degrees C. In this temperature range, the core-shell micelles and the unimers coexist and the fraction of the former gradually increases with increasing temperature, suggesting equilibrium between the micelles and the unimers. In the concentrated regime (40 wt % solution), the solution forms a gel and the small-angle X-ray scattering measurements reveal the successive formation of hexagonal and lamellar liquid crystal phases with increasing temperature.     

Dynamic elasticity of triblock copolymer of poly(ethylene oxide) and poly(propylene oxide) on a water surface

Dilatational viscoelasticity of adsorbed and spread films of the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer at the air-water interface is studied by the capillary waves and oscillating barrier techniques. At the surface pressure below 10 mN/m, dynamic surface properties of these films coincide with those of poly(ethylene oxide). At higher surface pressures, the results obtained indicate the desorption of poly(propylene oxide) segments from the monolayer and their interaction with poly(ethylene oxide) segments in an aqueous phase. At a surface pressure close to 19 mN/m, the behavior of adsorbed and spread poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) films becomes different. The real part of dynamic surface elasticity of spread films tends toward its maximum value (20 mN/m) and, upon further compression, films begin to dissolve. At the same time, the surface elasticity of adsorbed films decreases nearly twofold upon the achievement of the maximum value that testifies the formation of looser structure of the surface layer.     

Thermal degradation behavior of a carboxylic acid-terminated amphiphilic block copolymer poly(ethylene)-b-poly(ethylene oxide)

The thermal degradation of an amphiphilic block copolymer poly(ethylene)-b-poly(ethylene oxide)-carboxylic acid terminated (PE-b-80%PEO–CH₂COOH) and its salt obtained as intermediary product from chemical oxidation of the end group of poly(ethylene)-b-poly(ethylene oxide) (PE-b-80%PEO) has been studied using a thermogravimetric mass spectrometry (TG/MS) coupled system. The isothermal fragmentation of PE-b-80%PEO–CH₂COOH showed a more complex fragmentation pattern than PE-b-80%PEO owing to the simultaneous occurrence of the polyether block and the carboxylic end group fragmentations. This led to the appearance of four overlapping ion current peaks of fragments with m/z 44 and two peaks relative to m/z 18 at different times by acid-terminated copolymer. For the PE-b-80%PEO copolymer, two ion current peaks associated to m/z 44 and one large peak relative to m/z 18 fragments were detected. The intermediary product (PE-b-80%PEO–CH₂COO⁻ K⁺) showed differences related to the fragmentation behavior. It has more defined ion current signals and presented characteristic peaks attributed to m/z 43 fragment at the very beginning of the thermal degradation process, which it not detected in the acid copolymer.     

Thermal behavior of poly(thiocarbonylthio-1,3-phenylene)

The thermal behavior of poly(thiocarbonylthio-1,2-phenylene) (PTCTP) was investigated from the points of view of both thermal transitions and the reactions which occur on heating at high temperature. In order better to understand the latter, S,S-diphenyldithiocarbonate (DPDTC) was synthesized and its degradation studied.For the thermal transitions it was found that, compared with the analogous poly(1,3-phenylenecarbonate) (PPC), T_g did not change, whereas there was a decrease in T_m.The degradation proceeds through different reaction pathways: the first step seems to be the breaking of the S-carbonyl bond followed by the evolution of CO mainly and, to a lesser extent, of COS. The other reaction products are mainly disulfide and sulfide moieties.     

Multiple morphologies from a novel diblock copolymer containing dendronized polymethacrylate and linear poly(ethylene oxide)

A novel amphiphilic diblock copolymer, consisting of dendronized polymethacrylate‐b‐poly(ethylene oxide), was synthesized via atom transfer radical polymerization; from it, micellelike aggregates of various morphologies, prepared under near‐equilibrium conditions, were studied with transmission electron microscopy and scanning electron microscopy. The effects of various factors on the aggregate morphologies of the amphiphilic copolymer, such as the water content, the copolymer concentration, and the type of common solvent, were investigated systematically. The unique architecture of the block copolymer led to morphological variety and peculiarities such as dendritic and shuttle‐shaped aggregates, which could be attributed to the effective packing of the bulky side chains, that is, another driving force for the aggregates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2291–2297, 2005     

Phase behaviour and structural characterization of poly(1,3-propylene adipate)s with cyanoazobenzene side groups

The phase behaviour and the structure of three poly(1,3-propylene adipate)s containing cyanoazobenzene side groups bonded to the backbone unit through flexible spacers with 6, 8 and 10 methylene groups have been studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and X-ray diffraction (XRD) analysis. The polyadipates behave as enantiotropic side group liquid crystalline polymers. XRD analysis has shown that the organized phase of these polyadipates possesses a crystalline or a tilted structure of the SmF or SmG type. The temperature of fusion of this phase ( Tm= 45-48 C) is almost independent of the length of the side group spacers. The crystalline phase can be obtained only by prolonged annealing at room temperature because crystallization from kinetically hindered. The range of thermodynamic stability (Ti- Tm) of the mesophase formed on melting increases with the length of the side group flexible spacers. The structure of the mesophase, determined by XRD, is of the smectic A type, and is characterized by a relatively large longitudinal displacement of the side groups, which is responsible for the unusually weak low angle Bragg reflections.     

Synthesis and characterization of poly(ethylene oxide)/polylactide/poly(ethylene oxide) triblock copolymer

Poly(ethylene oxide/polylactide/poly(ethylene oxide) (PEO/PL/PEO) triblock copolymers, in which each block is connected by an ester bond, were synthesized by a coupling reaction between PL and PEO. Hydroxyl‐terminated PLs with various molecular weights were synthesized and used as hard segments. Hydroxyl‐terminated PEOs were converted to the corresponding acid halides via their acid group and used as a soft segment. Triblock copolymers were identified by Fourier transform infrared spectroscopy, ¹H NMR, and gel permeation chromatography. Differential scanning calorimetry (DSC) and X‐ray diffractometry of PEO/PL/PEO triblock copolymers suggested that PL and PEO blocks were phase‐separated and that the crystallization behavior of the PL block was markedly affected by the presence of the PEO block. PEO/PL/PEO triblock copolymers with PEO 0.75k had two exothermic peaks (by DSC), and both peaks were related to the crystallization of PL. According to thermogravimetric analysis, PEO/PL/PEO triblock copolymer showed a higher thermal stability than PL or PEO. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2545–2555, 2002     

Amphiphilic block copolymers containing thermally degradable poly(phthalaldehyde) blocks

In this study, the preparation of a new class of amphiphilic block copolymers consisting of a poly(phthalaldehyde) (PPA) block and hydrophilic poly(alkylene oxide) blocks is described. PPA was prepared by ionic cyclopolymerization. A telechelic polymer block was prepared by endcapping of the PPA by a bifunctional reagent carrying isocyanate and isothiocyanate groups. As the second block, monoamino‐terminated poly(alkylene oxide)s (Surfonamines®, also known as Jeffamines®) were chosen. These polymers could be readily coupled to the PPA telechel and gave amphiphlic, mainly ABA‐type block copolymers. The PPA block of these products can be selectively depolymerized at moderate temperature. The block copolymers were characterized by dual‐detection size exclusion chromatography, and the defined and stepwise thermal decomposition of the two different block types were shown by thermogravimetric analysis. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1499–1509, 2009     

Novel biodegradable copolyesters containing blocks of poly(3-hydroxyoctanoate) and poly(epsilon-caprolactone): synthesis and characterization

Novel biodegradable polyester block copolymers have been synthesized by using well-defined poly(3-hydroxyoctanoate) (PHO) oligomers having a hydroxyl end group and an ester end group with M(n) values of 800, 2,500, 5,300, 8,000, or 20,000 as an elastomeric soft segment and poly(epsilon-caprolactone) as a more crystalline segment. These PHO oligomers prepared by methanolysis were subjected to block copolymerization with epsilon-caprolactone. The chemical structure of the copolymers was confirmed by (1)H NMR and (13)C NMR spectroscopy. All the copolyesters are semi-crystalline and two T(g) were observed by differential scanning calorimetry when the molecular weight of the PHO block is about 20,000.     

Single nanocrystal arrays on patterned poly(ethylene glycol) copolymer microstructures using selective wetting and drying

Single nanocrystal arrays were fabricated on sub-microwells of poly(ethylene glycol) (PEG) copolymer using selective wetting on the hydrophilic regions of the exposed substrate surface and subsequent drying. Templates were produced by molding a thin film of a PEG-based random copolymer on hydrophilic substrates such as glass or silicon dioxide. The polymeric microstructures provide a topographical barrier around the well, which makes it possible to create nanocrystal arrays with controlled geometrical features. The size of the nanocrystal was found to decrease with decreasing well size and also decrease with decreasing topological height. A simple empirical equation was derived to predict the size of the crystal as a function of the pattern size and height, which is in good agreement with the experimental data.     

Block copolymer with liquid-crystalline polyacrylate and poly(propylene oxide) segments

A new route of synthesis of block copolymers was investigated. It involves the polymerization of a side-chain liquid-crystalline acrylate and poly(propylene glycol), modified by an esterification reaction with mercaptoacetic acid used as macrotransfer agent, in the presence of 2,2′-azoisobutyronitrile as initiator. The molecular weight of the liquid-crystalline blocks is determined by the molar ratio between the reactants.     

Structure of triblock-copolymers based on poly(ethylene oxide) and poly(acrylamide) with central blocks of varying lengths

Temperature transitions have been studied in the structure of triblock copolymers based on poly(ethylene oxide) and poly(acrylamide) (PAA-b-PEO-b-PAA) with central blocks of varying length and compared with individual polymers and polymer mixtures with analogous composition. It has been established that interaction of the polymer components on account of the formation of systems of intramolecular hydrogen bonds is strengthened by the presence of covalent bonds between the components. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 41, No. 6, pp. 364–370, November–December, 2005.