Optimization and modeling of synthesis parameters of neodymium(III) bromide by dry method using full factorial design analysis

The synthesis of neodymium(III) bromide (NdBr₃) by sintering brominating of neodymium oxide (Nd₂O₃) with ammonium bromide (NH₄Br) was investigated. The influence of various synthesis parameters (temperature, contact time and stoichiometry) on the reaction yield was studied and optimized. The main interaction effects of the synthesis parameters on the reaction yield were also determined by a full 2³ factorial designs with six replicates at the center point.This study showed that the optimum conditions for the synthesis of NdBr₃ are following: contact time t = 60 min, stoichiometry in moles Nd₂O₃:NH₄Br = 1:24 and temperature T = 400 °C. The reaction yield for these parameters was equal to 97.80%. The first order model was obtained to predict the reaction yield as a function of these three parameters. It was shown that all parameters have a significant positive influence on reaction yield. In addition it was pointed out also that the interaction effects between them are significant.     

Optimization of inulinase production by Kluyveromyces marxianus using factorial design

Factorial design and response surface techniques were used to optimize the culture medium for the production of inulinase by Kluyveromyces marxianus. Sucrose was used as the carbon source instead of inulin. Initially, a fractional factorial design (2^5–1) was used in order to determine the most relevant variables for enzyme production. Five parameters were studied (sucrose, peptone, yeast extract, pH, and K₂HPO₄), and all were shown to be significant. Sucrose concentration and pH had negative effects on inulinase production, whereas peptone, yeast extract, and K₂HPO₄ had positive ones. The pH was shown to be the most significant variable and should be preferentially maintained at 3.5. According to the results from the first factorial design, sucrose, peptone, and yeast extract concentrations were selected to be utilized in a full factorial design. The optimum conditions for a higher enzymatic activity were then determined: 14 g/L of sucrose, 10 g/L of yeast extract, 20 g/L of peptone, 1 g/L of K₂HPO₄. The enzymatic activity in the culture conditions was 127 U/mL, about six times higher than before the optimization.     

Kinetics of thermal decomposition of manganese(ii) oxalate

The kinetics of manganese(II) oxalate thermal decomposition in the helium atmosphere was studied on the basis of isothermal measurements in the temperature range from 608 to 623 K. Manganese(II) oxide, MnO, was found to be the final product of reaction. The Avrami-Erofeev kinetic equation was used to describe all the experimental data in the range of decomposition degrees from 0.1 to 0.9. The determined activation energy equals 184.7 kJ mol^-1 with standard deviation ±5.2 kJ mol^-1. The estimated value of parameter n is 1.9 with standard deviation ±0.01 what suggests that the rate limiting step of MnC₂O₄ decomposition is the nucleation of new MnO phase and that the rate of nuclei growth is rising during decomposition. This revised version was published online in July 2006 with corrections to the Cover Date.     

Determination of the kinetic parameters of the multi-stage thermal decomposition of solids under non-isothermal conditions by the non-linear estimation approach

The activation energy of decomposition of aluminium hydroxidevs. weight loss was estimated from thermogravimetric data collected over a wide range of heating rates, without resorting to the model of the reaction mechanism.These activation energy values were subsequently used to distinguish individual dehydration stages and to determine the best models of the reaction kinetics for these stages.Finally, the overall decomposition model was formulated, and its parameters were determined by the non-linear estimation approach.

---

Zusammenfassung Die Aktivierungsenergie der Zersetzung von Aluminiumhydroxid wurde in Abhängigkeit vom Gewichtsverlust aus einen weiten Bereich von Aufheizgeschwindigkeiten umfassenden thermogravimetrischen Daten gesammelt, ohne auf das Modell des Reaktionsmechanismus einzugehen.Diese Werte der Aktivierungsenergien wurden daraufhin zur Unterscheidung einzelner Dehydratisierungsstufen und zur Bestimmung der besten Modelle der Reaktionskinetik dieser Stufen eingesetzt.Schließlich wurde ein allgemeines Zersetzungsmodell formuliert und seine Parameter durch nichtlineare Schätzungsnäherung bestimmt.

---

Résumé On a estimé l'énergie d'activation de la décomposition de l'oxyde d'aluminium en fonction de la perte de poids à partir de données thermogravimétriques obtenues avec un large intervalle de vitesses de chauffage, sans avoir recours au modèle du mécanisme de la réaction. On a utilisé ensuite ces valeurs de l'énergie d'activation pour distinguer les étapés individuelles de la déshydratation et pour déterminer les meilleurs modèles de cinétique réactionnelle correspondant à celles-ci.Enfin, on a formulé un modèle général de décomposition et déterminé ces paramètres par approximations non linéaires.

---

, , . . .

     

Study on the thermal decomposition kinetics of cis/trans-[Cu(gly)2]·H2O

The thermal decomposition reactions of the complexes cis/trans-[Cu(gly)2]· H2Owere studied by TG-DSC methods. The results showed that they have similar decomposition process, which occur in two steps. The first step is the loss of water and the second step is the decomposition of anhydrous complexes.But for cis-[Cu(gly)2]· H2O,the tempoerature of losing water is higher than that of trans-isomer. Their reaction mechanisms of the two-step decomposition were also proposed.     

Development,stability-indicating assessment,and evaluation of influential method conditions using a full factorial design for the determination of Nintedanib esylate-related impurities

The design of an appropriate analytical method for assessing the quality of pharmaceuticals requires a deep understanding of science, and risk evaluation approaches are appreciated. The current study discusses how a related substance method was developed for Nintedanib esylate. The best possible separation between the critical peak pairs was achieved using an X-Select charged surface hybrid Phenyl Hexyl (150 × 4.6) mm, 3.5 μm column. A mixture of water, acetonitrile, and methanol in mobile phase-A (70:20:10) and mobile phase-B (20:70:10), with 0.1% trifluoroacetic acid and 0.05% formic acid in both eluents. The set flow rate, wavelength, and injection volumes were 1.0 ml/min, 285 nm, and 5 μl, respectively, with gradient elution. The method conditions were validated as per regulatory requirements and United States Pharmacopeia general chapter < 1225 >. The correlation coefficient for all impurities from the linearity experiment was found to be > 0.999. The % relative standard deviation from the precision experiments ranged from 0.4 to 3.6. The mean %recovery from the accuracy study ranged from 92.5 to 106.5. Demonstrated the power of the stability-indicating method through degradation studies; the active drug component is more vulnerable to oxidation than other conditions. Final method conditions were further evaluated using a full-factorial design. The robust method conditions were identified using the graphical optimization from the design space.     

Tin(II)-EDTA complex: kinetic of thermal decomposition by non-isothermal procedures

Tin on the oxide form, alone or doped with others metals, has been extensively used as gas sensor, thus, this work reports on the preparation and kinetic parameters regarding the thermal decomposition of Sn(II)-ethylenediaminetetraacetate as precursor to SnO₂. Thus, the acquaintance with the kinetic model regarding the thermal decomposition of the tin complex may leave the door open to foresee, whether it is possible to get thin film of SnO₂ using Sn(II)-EDTA as precursor besides the influence of dopants added.The Sn(II)-EDTA soluble complex was prepared in aqueous medium by adding of tin(II) chloride acid solution to equimolar amount of ammonium salt from EDTA under N₂ atmosphere and temperature of 50 °C arising the pH∼4. The compound was crystallized in ethanol at low-temperature and filtered to eliminate the chloride ions, obtaining the heptacoordinated chelate with the composition H₂SnH₂O(CH₂N(CH₂COO)₂)₂·0.5H₂O.Results from TG, DTG and DSC curves under inert and oxidizing atmospheres indicate the presence of water coordinated to the metal and that the ethylenediamine fraction is thermally more stable than carboxylate groups. The final residue from thermal decomposition was the SnO₂ characterized by X-ray as a tetragonal rutile phase.Applying the isoconversional Wall-Flynn-Ozawa method on the DSC curves, average activation energy: E_a=183.7±2.7 and 218.9±2.1 kJ mol⁻¹, and pre-exponential factor: and 19.10±0.27 min⁻¹, at 95% confidence level, could be obtained, regarding the loss of coordinated water and thermal decomposition of the carboxylate groups, respectively. The E_a and log A also could be obtained applying isoconventional Wall-Flynn method on the TG curves.From E_a and log A values, Dollimore and Malék procedures could be applied suggesting R3 (contracting volume) and SB (two-parameter model) as the kinetic model to the loss of coordinated water (177-244 °C) and thermal decomposition of the carboxylate groups (283-315 °C), respectively. Simulated and experimental normalized DTG and DSC curves besides analysis of residuals check these kinetic models.     

General remarks on the thermal decomposition of some drugs

The thermal decomposition of antituberculous, local anaesthetic and calcium salts of organic acids used as the drugs has been studied by differential thermal and thermogravimetric techniques. General characteristics of their thermal decomposition has been made. The effect of sample size over the range 20–200 mg and heating rate over the range 3–15 deg·min^?1 on the thermal degradation has been investigated. The values of the kinetic parameters has been also determined.     

Study of the thermal decomposition on Pt(II) complexes with cycloalkanespiro-5′-hydantoins

The thermal decomposition of the Pt(II) complexes with cyclobutane-and cycloheptanespiro-5′-hydantoins were studied by TG and DTA techniques. The Pt(II) complex with cyclobutanespiro-5′hydantoin (PtCBH) was stable up to 115°C (388 K) and Pt(II) complex with cycloheptanespiro-5′-hydantoin (PtCHTH) was stable up to 150°C (423 K). After the thermal decomposition of PtCBH the solid residue was platinum, while the decomposition of PtCHTH gave a mixture of platinum carbides (PtC₂, Pt₂C₃).     

Kinetics of thermal decomposition of alkaline phosphates

Summary The thermal behavior of KH₂PO₄, NaH₂PO₄ and Na₂HPO₄ under non-isothermal conditions using TG method with different heating rates was studied. The values of the reaction rate were processed by means of Friedmans differential-isoconversional method. A dependence of the activation energy vs. conversion was observed. Therefore a procedure based on the compensation effect (suggested by Budrugeac and Segal) was applied. A less speculative data processing protocol was offered by the non-parametric kinetics method suggested by Serra, Nomen and Sempere. Three steps were observed by non-isothermal heating: a dehydration, a dimerization and a polycondensation. The differences in the intimate reaction mechanism are determined by the initial number of water molecules.     

Effect of polymer and ion concentration on mechanical and drug release behavior of gellan hydrogels using factorial design

Developing optimized hydrogel products requires an in-depth understanding of the mechanisms that drive hydrogel tunability. Here, we performed a full 4 × 4 factorial design study investigating the impact of gellan, a naturally derived polysaccharide (1%, 2%, 3%, or 4% w/v) and CaCl₂ concentration (1, 3, 7, or 10 mM) on the viscoelastic, swelling, and drug release behavior of gellan hydrogels containing a model drug, vancomycin. These concentrations were chosen to specifically provide insight into gellan hydrogel behavior for formulations utilizing polymer and salt concentrations expanding beyond those commonly reported by previous studies exploring gellan. With increasing gellan and CaCl₂ concentration, the hydrogel storage moduli (0.1–100 kPa) followed a power-law relationship and on average these hydrogels had higher liquid absorption capability and greater total drug release over 6 days. We suggest that the effects of gellan and CaCl₂ concentration and their interactions on hydrogel properties can be explained by various phenomena that lead to increased swelling and increased resistance to network expansion.     

A thermal decomposition study on cobalt(II) complexes of 1,2-bis(IMINO-4'-antipyrinyl)ethane

The phenomenological, kinetic and mechanistic aspects of thermal decomposition of perchlorate, nitrate, chloride, bromide and iodide complexes of cobalt(II) with the Schiff base 1,2-bis(imino-4'-antipyrinyl)ethane (GA) have been studied by TG and DTG analyses. The kinetic parameters like the activation energy, pre-exponential factor and entropy of activation were calculated. The decomposition reactions follow 'random nucleation with one nucleus on each particle - Mampel model'. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of atmosphericwater vapor on the kinetics of thermal decomposition of copper(II) carbonate hydroxide

The effect of atmospheric water vapor on the kinetic rate behavior of the thermal decomposition of copper(II) carbonate hydroxide, Cu₂CO₃(OH)₂, was investigated by means of TG-DTA coupled with a programmable humidity controller. With increasing water vapor pressure p(H₂O) from 0.8 to 10.6 kPa, a systematic reduction of the reaction temperature of the thermal decomposition was observed as the continuous trend from the previous works at the lower p(H₂O). Through a comparative kinetic analysis of the reaction at different p(H₂O), a catalytic action of the atmospheric water vapor on the nucleation process at the first half of the reaction was identified as the possible origin of the reduction of the reaction temperature.     

Mechanism and kinetics of thermal decomposition of nickel(II) sulfate(VI) hexahydrate

This work presents results of research on thermal decomposition of nickel(II) sulfate(VI) hexahydrate in air and in helium atmosphere. On the base of TG and XRD results a mechanism of thermal decomposition of NiSO₄ hydrate was established. For calculations of kinetic parameters of the Arrhenius equation, the Coats-Redfern approximation was applied. Choice of g(a) function and thus of a mechanism best describing given stage of decomposition was performed by testing 12 kinetic models. This revised version was published online in July 2006 with corrections to the Cover Date.     

On the thermal stability and thermal decomposition kinetics of some mono- and disubstituted furan-2,3-dions

The thermal behaviour of some compounds derived from 5-phenylfuran-2,3-dione was studied. The thermoanalytical data relating to the decomposition steps and intermediates were completed with mass spectrometric analysis and infrared spectroscopy results. For some of the investigated reactions, the kinetic and structural data correlated satisfactorily.     

A novel homocystine-agarose adsorbent for separation and preconcentration of nickel in table salt and baking soda using factorial design optimization of the experimental conditions

Homocystine was for the first time, chemically linked to a highly cross-linked agarose support (Novarose) to be employed as a chelating adsorbent for preconcentration and AAS determination of nickel in table salt and baking soda. Nickel is quantitatively adsorbed on a small column packed with 0.25 ml of the adsorbent, in a pH range of 5.5–6.5 and simply eluted with 5 ml of a 1 mol l⁻¹ hydrochloric acid solution.

A factorial design was used for optimization of the effects of five different variables on the recovery of nickel. The results indicated that the factors of flow rate and column length, and the interactions between pH and sample volume are significant.

In the optimized conditions, the column could tolerate salt concentrations up to 0.5 mol l⁻¹ and sample volumes beyond 500 ml. Matrix ions of Mg²⁺ and Ca²⁺, with a concentration of 200 mg l⁻¹, and potentially interfering ions of Cd²⁺, Cu²⁺, Zn²⁺ and Mn²⁺, with a concentration of 10 mg l⁻¹, did not have significant effect on the analyte's signal. Preconcentration factors up to 100 and a detection limit of 0.49 μg l⁻¹, corresponding to an enrichment volume of 500 ml, were obtained for the determination of the analyte by flame AAS. Application of the method to the determination of natural and spiked nickel in table salt and baking soda solutions resulted in quantitative recoveries. Direct ETAAS determination of nickel in the same samples was not possible because of a high background observed.     

Kinetic study of the thermal decomposition of TEA<Superscript>+</Superscript>/SAPO-5

A silico alumino phosphate with AFI structure (SAPO-5) was prepared in a two-phase medium and characterized by XRD, followed by the addition of TEA⁺. The kinetics of the TEA⁺/SAPO-5 thermal decomposition reaction was studied by isothermal and dynamic thermogravimetry. Two kinetic models, D₃ and D₄ based on diffusion processes were found as best to fit the isothermal data. On the other hand, the best fit for the dynamic data is the F₁ first order reaction model. According to the apparent activation energy values, the use of the dynamic method indicates a higher temperature dependence than the isothermal method.     

过氧化苯甲酸叔丁酯的热分解动力学研究及SADT推算

研究了过氧化苯甲酸叔丁酯的热分解动力学及不同包装规格下的自加速分解温度(SADT),利用C600微量热仪测试了过氧化苯甲酸叔丁酯的热分解特征,得到升温速率分别为0.1 K/min、0.2 K/min、0.5 K/min、1 K/min下热流随时间的变化曲线,并使用Friedman等转化率法对所得的实验数据进行分析处理,得到了过氧化苯甲酸叔丁酯的分解反应活化能、指前因子等热动力学参数,推算了不同包装规格的过氧化苯甲酸叔丁酯的SADT。结果表明TBPB分解活化能及指前因子随转化率变化而变化,活化能范围为42-135.5 kJ/mol,指前因子范围为0.25-33.5,在25L聚乙烯桶包装下的SADT为59℃,50L下为52℃,200L下为46℃。     

氢氧化镁分解动力学的研究

以硼泥为原料与硫酸反应制备出七水硫酸镁,以氢氧化钠为沉淀剂制备出符合标准HG/T 3607-2000的氢氧化镁.利用XRD,SEM和TEM对氢氧化镁进行了表征,DTA-TG对氢氧化镁的热分解动力学进行了研究.XRD结果表明:制备粉体为单一Mg(OH)2.SEM和TEM结果表明:样品为片状或针状纤维,片直径大小不一,在20～50 nm之间,针状纤维形状不规则,大小不一致,长度在20～100 nm之间.利用Kissinger法和Ozawa法计算出的氢氧化镁热分解反应活化能分别为135.14和141.61 kJ·mol-1.利用Coats-Redfern法和Dolye法判断氢氧化镁热分解反应机理函数为A1.5.     

Neural networks for kinetic parameters determination, signal filtering and deconvolution in thermal analysis

Feedforward neural networks have been used for kinetic parameters determination and signal filtering in differential scanning calorimetry. The proper learning function was chosen and the network topology was optimized, using an empiric procedure. The learning process was achieved using simulated thermoanalytical curves. The resilient-propagation algorithm have led to the best minimization of the error computed over all the patterns. Relative errors on the thermodynamic and kinetic parameters were evaluated and compared to those obtained with the usual thermal analysis methods (single scan methods). The errors are much lower, especially in presence of noisy signals. Then, our program was adapted to simulate thermal effects with known thermodynamic and kinetic parameters, generated electrically, using a PC computer and an electronic interface on the serial port. These thermal effects have been generated by using an inconel thread.