Recent development of heterogeneous catalysis in ring-opening,biocatalysis, and selective partial oxidation reactions on metal oxides

In this review article, we analyze the state of the art and future developments in three important domains of heterogeneous catalysis, namely ring opening, biocatalysis, and partial oxidation on metal oxides. After recollecting the scientific bases of each domain, we consider several examples, some recent improvements/developments, and some prospective views.     

Catalytic activity of nanosized Co-Cu oxide systems in the deep oxidation of methane

The effect of the composition of nanosized catalysts, produced by thermal decomposition of Co(II) and Cu(II) formates deposited on ZrO₂, SBA-15, and MCM-41, on their activity in the deep oxidation of methane was investigated. It was shown that the activity of the catalyst depends on the nature of the support and on the Co/Cu ratio. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 41, No. 6, pp. 331–335, November–December, 2005.     

Baeyer-Villiger oxidation of ketones in ionic liquids using molecular oxygen in the presence of benzaldehyde

A new and efficient method for the synthesis of lactones involving the application of an oxygen/benzaldehyde system as the oxidant and ionic liquids as solvents is reported. A significant rate enhancement was observed at 90 °C when the oxidation of ketones was carried out in the presence of a free radical initiator. The oxidation of model cyclic ketones, such as cyclopentanone, cyclohexanone, 2-methylcyclohexanone, 2-norbornone, 2-adamantanone and cycloheptanone gave lactones in high yields (84-90%) within relatively short periods of time, with the possibility of effective ionic liquids recycling. Additionally, discussion of the free radical mechanism of this reaction is proposed.     

Zeolite Synthesis in the Presence of Metallosiloxanes for the Quantitative Encapsulation of Metal Species for the Selective Catalytic Reduction (SCR) of NOx

Metal encapsulation in zeolitic materials through one-pot hydrothermal synthesis (HTS) is an attractive technique to prepare zeolites with a high metal dispersion. Due to its simplicity and the excellent catalytic performance observed for several catalytic systems, this method has gained a great deal of attention over the last few years. While most studies apply synthetic methods involving different organic ligands to stabilize the metal under synthesis conditions, here we report the use of metallosiloxanes as an alternative metal precursor. Metallosiloxanes can be synthesized from simple and cost-affordable chemicals and, when used in combination with zeolite building blocks under standard synthesis conditions, lead to quantitative metal loading and high dispersion. Thanks to the structural analogy of siloxane with TEOS, the synthesis gel stabilizes by forming siloxane bridges that prevent metal precipitation and clustering. When focusing on Fe-encapsulation, we demonstrate that Fe-MFI zeolites obtained by this method exhibit high catalytic activity in the NH₃-mediated selective catalytic reduction (SCR) of NO_x along with a good H₂O/SO₂ tolerance. This synthetic approach opens a new synthetic route for the encapsulation of transition metals within zeolite structures.     

Activated carbon prepared by physical activation of olive stones for the removal of NO2 at ambient temperature

Activated carbon was prepared from olive stones by physical activation using water vapor at 750 °C. Textural, morphology and surface chemistry characterizations were achieved (nitrogen adsorption, SEM, FTIR and TPD–MS). NO₂ adsorption was performed for different inlet gas compositions and temperatures. NO₂ may adsorb directly on the oxygenated surface groups, and can also be reduced to NO. Therefore, a second NO₂ molecule adsorbs on the oxygen left on the carbon surface. TPD performed after NO₂ adsorption showed the presence of various surface groups. The adsorption capacity was about 131 mg/g, which is higher than with several activated carbon prepared from classical lignocellulosic biomass. NO₂ reduction into NO decreased with increasing the inlet oxygen concentration. In contrast, a slight decrease in the NO₂ adsorption capacity was observed with increasing temperature. It seems that the activated carbons prepared from olive stones by steam activation could be used as efficient adsorbents for NO₂ removal.     

Copper(II) Schiff base complexes derived from 2,2′-dimethyl-propandiamine: Synthesis, characterization and catalytic performance in the oxidation of styrene and cyclooctene

Two new mononuclear copper(II) complexes ([CuL¹]·CHCl₃ (1) and [CuL²] (2)) have been prepared by the reaction of two ONNO type Schiff base ligands, ([bis(2-hydroxy-propiophenone)2,2′-dimethylpropan-diamine] (H₂L¹) and [bis(5-bromosalicylaldehyde)2,2′-dimethyl-propandiamine] (H₂L²)) with Cu(OAc)₂·H₂O in 1:1 molar ratios. The complexes have been characterized by elemental analyses, IR and UV-Vis spectroscopy. The structures have been confirmed by X-ray single crystal analysis at 100 K. The Cu(II) atom in 1 is coordinated equatorially by a N₂O₂ donor set of the tetradentate, dinegative Schiff-base (L¹)²⁻ in a distorted square planar arrangement. While in [CuL²] (2), the Cu(II) ion possesses an additional weak intermolecular contact with one bromine atom of the ligand, thus the coordination sphere of 2 can be described as strongly distorted square pyramidal. The catalytic performance of the prepared copper complexes for the oxidation of styrene and cyclooctene with tert-butyl hydroperoxide has been evaluated.     

Oxovanadium(IV) and copper(II) complexes of 1,2-diaminocyclohexane based ligand encapsulated in zeolite-Y for the catalytic oxidation of styrene, cyclohexene and cyclohexane

N,N′-Bis(salicylidene)cyclohexane-1,2-diamine (H₂sal-dach) reacts with oxovanadium(IV) and copper(II) exchanged zeolite-Y in refluxing methanol to yield the corresponding zeolite-Y encapsulated metal complexes, abbreviated herein as [VO(sal-dach)]-Y and [Cu(sal-dach)]-Y. Spectroscopic studies (IR, electronic and ¹H NMR), thermal analysis, scanning electron micrographs (SEM) and X-ray diffraction patterns have been used to characterise these complexes. These encapsulated complexes catalyse the oxidation, by H₂O₂, of styrene, cyclohexene and cyclohexane efficiently in good yield. Under the optimized conditions, the oxidation of styrene catalysed by [VO(sal-dach)]-Y and [Cu(sal-dach)]-Y gave 94.6 and 21.7% conversion, respectively, where styreneoxide, benzaldehyde, benzoic acid, 1-phenylethane-1,2-diol and phenylacetaldehyde being the major products. Oxidation of cyclohexene catalysed by these complexes gave cyclohexeneoxide, 2-cyclohexene-1-ol, cyclohexane-1,2-diol and 2-cyclohexene-1-one as major products. Conversion of cyclohexene achieved was 86.6% with [VO(sal-dach)]-Y and 18.1% with [Cu(sal-dach)]-Y. A maximum of 78.1% conversion of cyclohexane catalysed by [Cu(sal-dach)]-Y and only 21.0% conversion by [VO(sal-dach)]-Y with major reaction products of cyclohexanone, cyclohexanol and cyclohexane-1,2-diol have been obtained.     

新型微胶囊负载环多胺锰配合物的催化氧化性能

采用乳化溶剂蒸发的方法制备了负载型催化剂环多胺锰/乙基纤维素微胶囊(MnAcL-EC), 并确认了MnAcL在微胶囊内负载后结构的完整性, 对其进行了形貌结构表征, MnAcL-EC微胶囊负载型催化剂内部呈特殊的多芯结构. 该催化剂在活性蓝(C.I. Reactive Blue 49)的氧化反应中表现出了优异的催化性能. 催化反应后微胶囊粒径增大, 球体表面孔道增多; 元素分析结果显示, 微胶囊内负载的MnAcL在催化反应后几乎没有减少, 表明负载后的MnAcL是在微胶囊内部催化了外界底物分子的氧化反应. 所制备的MnAcL-EC微胶囊具备很好的循环利用性, 可以有效减少催化活性组分的流失, 方便回收利用.     

Catalytic oxidation of organic substrates with hydrogen peroxide in two-phase systems in the presence of peroxo-polyoxotungstates containing organic ligands

The prospects of using bifunctional homogeneous metal-complex catalysts based on peroxo-polyoxotungstates with organic ligands (tertiary phosphine oxides) were exemplified by oxidation of benzyl alcohol and cyclooctene with hydrogen peroxide in two-phase systems (organic phase — liquid phase).     

Ionic solvation in water + co-solvent mixtures. Part 8. Total free energies of transfer and free energies of transfer with the “neutral” component removed of single ions from water into water + acetone

The acid dissociation constants of a wide range of acids in water+acetone mixtures have been combined with values for the free energy of transfer of the proton. ΔG⁰_t(H⁺ to calculate values for the free energy of transfer of ions which derive only from the charge on the ion. ΔG⁰_t(i)_c. As the values of ΔG⁰_t(H⁺) have been revised, revised values for the total free energies of transfer of cations and anions, ΔG⁰_t(M⁺) and ΔG^o_t(X^-), are given. New data for ΔG^o_t(MX_n) is also split into values for ΔG⁰_t(Mⁿ⁺) (where n=1 and 2) and ΔG⁰_t(X^?). These free energies of transfer, both total and those deriving from the charge alone, are compared with similar free energies in other mixtures water+co-solvent. Values for ΔG^o_t(i)_c do not conform to a Born-type relationship and show the importance of structural effects in the solvent even when only the transfer of the charge is involved.     

Cr-HMS合成、表征及其在催化氧化反应中的应用

合成了一系列不同Cr含量的CrHMS介孔分子筛,并对其物化性质进行了表征.结果表明,Cr的引入降低了介孔分子筛骨架结构的规整度和孔径的均一程度.CrHMS对苯羟基化和环己烷氧化反应均表现出良好的催化活性,并且随Cr含量的增加,催化活性呈火山型分布.对于较易进行的环己烷氧化反应,将CrHMS在H₂气氛中预先还原处理,可使催化剂既能保持较高的催化氧化活性,又能获得较好的稳定性.     

A simple method for the oxidation of primary alcohols with o-iodoxybenzoic acid (IBX) in the presence of acetic acid

A simple method for the oxidation of primary alcohols to aldehydes using o-iodoxybenzoic acid (IBX) with the addition of stoichiometric acetic acid has been developed. Addition of acetic acid significantly accelerated the reaction rate. Under these conditions, primary aliphatic, benzylic, and allylic alcohols are smoothly converted to aldehydes in high yields (90-97%).     

Ferric nitrate in the presence of catalytic amounts of KBr or NaBr: an efficient and homoselective catalytic media for the selective oxidation of sulfides to sulfoxides

Abstract  A mild, efficient, and highly selective oxidation method of sulfides to sulfoxides using Fe(NO₃)₃·9H₂O and catalytic amounts of KBr or NaBr in the presence of wet SiO₂ (50% w/w) has been developed. A variety of aliphatic and aromatic sulfides were selectively oxidized at room temperature in good to excellent yields. Graphical abstract        

Effect of the surface/bulk doping of lanthanum manganite on the oxygen mobility, reactivity and catalytic activity in the CO oxidation

Summary  Vezetéknév     

Performance of palladium-containing supported catalysts in the oxidation of 1-butene

Performance of palladium-containing supported catalysts in the oxidation of 1-butene was investigated in a fixed-bed flow microreactor. The Pd-Fe-HCl/Ti-Al catalyst is the best among the five Pd-Fe-HCl/X (A= SiO₂,γ -Al₂O₃, Al-Ti, TiO₂, MCM-22) catalysts for the oxidation of 1-butene to butanone. It is interesting that high propionic acid selectivity can be obtained when V and H₂SO₄ are added to the palladium-containing supported catalysts. This revised version was published online in June 2006 with corrections to the Cover Date.     

Mono-substituted Keggin-polyoxometalate complexes as effective and recyclable catalyst for the oxidation of alcohols with hydrogen peroxide in biphasic system

Mono-substituted Keggin-polyoxymetalate complex Na₆ [SiW₁₁ZnH₂O₄₀]·12H₂O was demonstrated to be an effective catalyst for the selective oxidation of alcohols in the presence of hydrogen peroxide as oxidant. The reaction was carried out in an aqueous/oil biphasic system, which allowed easy recovery of catalyst, under relative mild conditions. The catalyst could be reused five times without appreciable loss of activity.     

Preliminary selection of clay minerals for the removal of pharmaceuticals,bisphenol A and triclosan in acidic and neutral aqueous solutions

Pharmaceuticals, personal care products and endocrine disruptors demonstrate huge potential to cause adverse ecological health effects at very low concentration in aquatic environment. There is a need to improve current purification technologies used in sewage and drinking-water treatment plants. This article aims at providing new insights into the recent development of natural and modified clay-based sorbents for the removal of aqueous contaminants such as pharmaceuticals and personal care products. The removal of six widely used pharmaceuticals: ibuprofen, diclofenac, ketoprofen, carbamazepine, as well as endocrine disrupting chemicals – bisphenol A and a bactericidal agent, triclosan – was examined by sorption onto eight adsorbents. Sorption was performed using natural and modified clay minerals – montmorillonite (Mt), vermiculite (VER), bentonite (B), kaolinite (K), commercial acid activated montmorillonites K10 and K30, and two carbonaceous-mineral nanocomposites, MtG5%T, BAlG3%C. This study showed that among the tested natural clays, vermiculite is the most promising sorbent for the removal of pharmaceuticals in purification processes. Among the modified clay minerals, the best results were achieved for carbonaceous bentonite and two acid activated montmorillonites K10 and K30. However, the removal of acidic pharmaceuticals on montomorillonite K10 and carbonaceous bentonite was strongly dependent on the pH value. In the case of vermiculite and acid-modified montmorillonite K30, the sorption of the selected compounds was not significantly affected by pH, which is crucial in wastewater treatment. The sorption constant divided by the specific surface area (K_d/A) is proposed to assess whether the surface area or chemical properties of the materials control the sorption process. K_d/A values were relatively high in the case of vermiculite, so it should be noticed that individual and specific surface properties of vermiculite were of crucial importance for sorption.     

Copper-cerium oxide catalysts for the selective oxidation of carbon monoxide in hydrogen-containing mixtures: I. Catalytic activity

A series of copper-cerium oxide catalysts were prepared, and their properties toward the reaction of CO oxidation in hydrogen-containing gas mixtures were studied. It was found that the copper-cerium oxide catalysts are stable, active, and selective in this reaction. The conditions under which these catalysts decreased the concentration of CO from 1 to <10^?3 vol % in hydrogen containing water vapor and carbon dioxide were determined.