Synthesis of dinuclear palladium complexes having two parallel isocyanide ligands,and their application as catalysts to pyrrole formation from tert-butylisocyanide and alkynes

Novel dinuclear palladium complexes having two isocyanide ligands were synthesized by using a binucleating ligand, N,N′-bis[2-(diphenylphsphino)phenyl]formamidinate (dpfam). The structure of [Pd₂(μ-dpfam)(tert-BuNC)₂]Cl was confirmed by X-ray analysis, showing that the Pd–Pd bond length of 2.5824(3) Å falls well within the range of those for known dipalladium complexes having the edge-sharing structure and two isocyanides coordinate to palladium in almost parallel and in close proximity. The dinuclear complex [Pd₂(μ-dpfam)(tert-BuNC)₂]PF₆ served as catalyst for pyrrole formation from tert-butylisocyanide and various alkynes.     

Syntheses,crystal structures and properties of dinuclear copper(I) complexes

Two dinuclear molecule-bridged Cu(I) complexes, (μ-bpym)[Cu(PPh₃)Cl]₂ (1), [(μ-bpym)(CuL)₂](ClO₄)₂·(CH₃CN)₂(H₂O) (2) (bpym = 2,2′-bipyrimidine, L = (R)-(+)-2,2′-bis(diphenylphospho)-1,1′-dinaphthalene) have been synthesized and characterized. The molecular structures of the two new dinuclear compounds exhibit bridging of two copper(I) centers by the symmetrically bis-chelating bpym ligand. Intriguingly, compound 1 features a remarkable “intramolecular organic sandwich” configuration where the central 2,2′-bipyrimidine bridging ligand interacts in π/π/π fashion with two phenyl rings from the coligands above and below the central plane, while chiral compound 2 exhibits second-order nonlinear optical effect and temperature-dependent luminescence. Upon decreasing the temperature from 298 to 10 K, compound 2 shows a red light emission.     

Synthesis,characterization and fluorescence properties of hexanuclear zinc(II) complexes

Two hexanuclear zinc(II) complexes, [Zn₆(L¹)₂(μ₂-OH)₂(μ₂-CH₃COO)₈] · CH₃CN (1 · CH₃CN) and [Zn₆(L²)₂(μ₂-OH)₂(μ₂-CH₃COO)₈] · 4CH₃CN (2 · 4CH₃CN), where HL¹ = 4-methyl-2,6-bis(cyclohexylmethyliminomethyl)-phenol and HL² = 4-methyl-2,6-bis(1-naphthalylmethyliminomethyl)-phenol, have been synthesized and characterized by elemental analysis, FT-IR and fluorescence spectroscopic methods, and by X-ray diffraction analysis. In the asymmetric unit of complex 1, two of the three zinc atoms have pentacoordinate geometries and the other is tetrahedrally coordinated, whereas the three distinct Zn atoms in complex 2 adopt three different coordination environments, namely distorted octahedral, trigonal bipyramidal and tetrahedral. The fluorescence properties of the ligands and complexes have been investigated.     

Silver alkoxide and amino N-heterocyclic carbenes; syntheses and crystal structures

Silver(I) complexes of heterobidentate ligands that incorporate one or two N-heterocyclic carbene moieties coupled with an alcohol or amine group have been made by direct deprotonation of ligands of the form [HOCR¹R²CH₂(1-HC{NCHCHNR})][X], H₂L¹X (X = Br, I), [H₂NR¹CHR²CHR²(1-HC{NCHCHNR})][Br]₂ H₃L²X₂ (X = Cl, Br), and [H₂N{CH₂CH₂(1-HC[NCHCHNMes])}₂][X]₃ H₄L³X₃ (X = Cl, Br). Silver(I) oxide is sufficiently basic to deprotonate both the imidazolium and the alcohol functional groups of all but one of the L¹ ligand precursors, to afford rare examples of silver alkoxide complexes [Ag(L¹)], stabilised by the soft donor carbene. Another complex of L¹ is characterised as the carbene alcohol adduct [Ag(HL¹)₂I]. The analogous reactions of silver(I) oxide with the amino imidazolium precursors afford silver amino-carbenes [Ag(HL²)Br] with the potentially bidentate L² ligand, and [Ag(HL³)X] (X = Cl, Br) with the potentially tridentate L³ ligand. A single crystal X-ray diffraction study of the latter complex confirms that the neutral amine of the potentially tridentate L³ ligand is unco-ordinated; instead the structure contains discrete chains of T-shaped silver bis(carbene) halide moieties that bridge to form a zig-zag 2-connected polymer. Protonolysis of two of the silver alkoxide and amino adducts, [Ag(L^1a)] and [Ag(HL^2a)Br], affords imidazolium complexes salts [H₂L^1a][AgCl₂] and [Ag(H₂L^2a)Br][AgBr₂] that retain the Ag(I) centre as complex counterions. The single crystal X-ray structures of these salts have been determined and show the silver(I) cations are now incorporated into ladders or chains as silver(I) halo-anions, and a silver amine dative bond is present in the latter complex.     

Synthesis and structure of dipalladium complexes containing cyclooctatetraene and bicyclooctatrienyl ligands

The reaction of a substitutionally labile dipalladium(I) complex [Pd₂(CH₃CN)₆][BF₄]₂ (1) with 1,3,5,7-cyclooctatetraene (COT) in acetonitrile afforded [Pd₂(μ-η³:η³-C₈H₈)(CH₃CN)₄][BF₄]₂ (2). The reaction of 2 with COT in acetonitrile yielded [Pd₂(μ-η³:η³-C₁₆H₁₆)(CH₃CN)₄][BF₄]₂ (4), where COT is dimerized via C-C bond formation. Complexes 2 and 4 were structurally characterized by X-ray diffraction analyses. In dichloromethane, COT isomerized to styrene at room temperature in the presence of catalytic amount of 1, 2, or 4.     

Palladium and platinum complexes with planar chiral 1,2-disubstituted ferrocenes containing phosphine and thioether donor groups

Three palladium(II) complexes and four platinum(II) complexes having general formula CpFe{1,2-C₅H₃(PPh₂)(CH₂SR)}MCl₂ (M = Pd, R = Ph, Et and tBu; M = Pt, R = Ph, Et, tBu and Cy) have been synthesized by reaction of the corresponding CpFe{1,2-C₅H₃(PPh₂)(CH₂SR)} ligands with PdCl₂(CH₃CN)₂ or PtCl₂(CH₃CN)₂. These complexes have been fully characterized in solution and in solid state. In all cases, monomeric square planar complexes were obtained as pure diastereoisomers.     

Synthesis and crystal structure of a new water-soluble sulfur-containing palladacyclic diaqua complex

A new water-soluble sulfur-containing palladacyclic diaqua complex [(SC)Pd^II(H₂O)₂]₂(SO₄) {[1]₂(SO₄), SC = C₆H₄-2-(CH₂S^tBu)} was synthesized from a reaction of Ag₂SO₄ with a water-insoluble palladacyclic dichloro complex [(SC)Pd^II(μ-Cl)]₂ (2) in water. Water-solubility of [1]₂(SO₄) at pH 7 at 25 °C is 9.4 mg/mL. NH₄PF₆ was added to the solution of [1]₂(SO₄) in water to give [1](PF₆). The structures of [1](PF₆) and 2 were unequivocally determined by X-ray analysis.     

Mechanism of reversible spin transition with a thermal hysteresis loop in [FeIII(qsal)2][Ni(dmise)2] · 2CH3CN: Selenium analogue of the precursor of an Fe(III) spin-crossover molecular conducting system

A novel Fe(III) spin-crossover complex, [Fe(qsal)₂][Ni(dmise)₂] · 2CH₃CN 1 [qsalH = N-(8-quinolyl)-salicylaldimine, dmise = 4,5-dithiolato-1,3-dithiole-2-selone] was prepared. The magnetic susceptibility measurements revealed 1 exhibited a cooperative spin transition with a thermal hysteresis loop of 15 K. The high and the low temperature structures of 1 indicated three-dimensional intermolecular π?π interactions play a key role in the cooperative spin transition, accompanying a reversible molecular slipping of π-dimer of Ni(dmise)₂ along the molecular long axis. The transfer integral calculation for 1 suggested the π-dimer of Ni(dmise)₂ is in the spin singlet state.     

Palladium(II) complexes with the new P,N-type ligand (2-oxazoline-2-ylmethyl)di-isopropylphosphine as intermediates in CO/ethylene or CO/methyl acrylate insertion

The ligand (i-Pr)₂PCH₂(oxazoline) (1a), of the P,N-donor type, was reacted with [PdMeCl(COD)] to yield the square planar methylpalladium(II) complex [PdClMe(P,N)] (P,N = 1a) (2a), from which the complex [PdMe(P,N)OTf] (OTf = OSO₂CF₃) (3a) was obtained by AgOTf-promoted chloride abstraction. The alkyl complexes

(P,N = 1a) (5a, R = H; 7a, R = C(O)OMe) have been isolated from the initial CO/ethylene or CO/methyl acrylate insertion steps into the Pd–Me bond of 3a, respectively, and spectroscopically characterized. Complexes 2a, 3a and 7a have been fully characterized by single crystal X-ray diffraction. Complex 7a is still a rare example of a structurally characterized CO/methyl acrylate stepwise insertion product. These complexes are relevant to the alternating copolymerization of olefins and carbon monoxide catalyzed by palladium complexes. In addition, the centrosymmetric dinuclear complex trans-[Pd(μ-Cl){(i-Pr)₂PCH₂(oxazoline)}]₂(OTf)₂ (6) has been obtained and characterized by X-ray diffraction; it appears to be the first dinuclear complex of the type [Pd(μ-Cl)(P,N)]₂ to be characterized by X-ray crystallography.

Résumé

Le ligand (i-Pr)₂PCH₂(oxazoline) (1a), de type donneur P,N, réagit avec [PdClMe(COD)] pour former le complexe plan carré méthylpalladium(II) [PdClMe(P,N)] (P,N = 1a) (2a), à partir duquel le complexe [PdMe(P,N)OTf] (OTf = OSO₂CF₃) (3a) a été obtenu par abstraction de chlorure à l'aide de AgOTf. Les complexes alkyles

(P,N = 1a) (5a, R = H; 7a, R = C(O)OMe), ont été isolés lors des premières étapes d'insertion de CO/éthylène ou de CO/acrylate de méthyle, respectivement, dans la liaison Pd–Me de 3a, et caractérisés par méthodes spectroscopiques. Les complexes 2a, 3a et 7a ont été complètement caractérisés par diffraction des rayons X sur monocristal. Le complexe 7a est un exemple encore rare de produit d'insertion par étapes de CO/acrylate de méthyle qui ait été caractérisé structuralement. Ces complexes sont pertinents pour la copolymérisation alternée d'oléfines et de monoxyde de carbone catalysée par les complexes du palladium. En outre, le complexe dinucléaire centrosymétrique trans-[Pd(μ-Cl){(i-Pr)₂PCH₂(oxazoline)}]₂(OTf)₂ (6) a été obtenu et caractérisé par diffraction des rayons X; il s'agit du premier complexe dinucléaire de type [Pd(μ-Cl)(P,N)]₂ à être caractérisé par diffraction des rayons X.     

Macrocyclic Pd(II) dithiolate complexes as catalysts in Heck reactions

The supramolecular palladium dithiolate complexes, [Pd₂(dppe)₂{S(C₆H₄)_nS}]₂(OTf)₄ and [Pd₂(dppe)₂(SCH₂C₆H₄CH₂S)]₄(OTf)₈ (dppe = 1,2-bis(diphenylphosphino)ethane) has been investigated as highly stable and robust catalysts in Heck C-C coupling reactions. The arylation of butyl acrylate and styrene with various aryl bromides under optimized catalytic systems, showed excellent yield and turnover number (410,000) of the products. The tetranuclear complexes showed slightly higher catalytic activity than the octanuclear complex.     

Diiron chelate complexes relevant to the active site of the iron-only hydrogenase

A novel unsymmetrically disubstituted propanedithiolate compound [Fe₂(CO)₄(κ²-dmpe)(μ-pdt)] (1) (pdt = SCH₂CH₂CH₂S, dmpe = Me₂PCH₂CH₂PMe₂) was synthesized by treatment of [Fe₂(CO)₆(μ-pdt)] with dmpe in refluxing THF. Compound 1 was characterized by single-crystal X-ray diffraction analysis. Protonation of 1 with HBF₄·Et₂O in CH₂Cl₂ gave at room temperature the μ-hydrido derivative [Fe₂(CO)₄(κ²-dmpe)(μ-pdt)(μ-H)](BF₄)] (2). At low temperature, ¹H and ³¹P–{¹H} NMR monitoring revealed the formation of a terminal hydride intermediate 3. Comparison of these results with those of a VT NMR study of the protonation of symmetrical compounds [Fe₂(CO)₄L₂(μ-pdt)] [L = PMe₃, P(OMe)₃] suggests that in disubstituted bimetallic complexes [Fe₂(CO)₄L₂(μ-pdt)], dissymmetry of the complex is required to observe terminal hydride species. Attempts to extend the series of chelate compounds [Fe₂(CO)₄(κ²-L₂)(μ-pdt)] by using arphos (arphos = Ph₂AsCH₂CH₂PPh₂) were unsuccessful. Only mono- and disubstituted derivatives [Fe₂(CO)_6−n(Ph₂AsCH₂CH₂PPh₂)_n(μ-pdt)] (n = 1, 4a; n = 2, 4b), featuring dangling arphos, were isolated under the same reaction conditions of formation of 1. Compound 4b was structurally characterized.     

Synthesis and catalytic properties of cationic palladium(II) and rhodium(I) complexes bearing diphosphinidinecyclobutene ligands

Cationic palladium(II) and rhodium(I) complexes bearing 1,2-diaryl-3,4-bis[(2,4,6-tri-t-butylphenyl)phosphinidene]cyclobutene ligands (DPCB–Y) were prepared and their structures and catalytic activity were examined (aryl = phenyl (DPCB), 4-methoxyphenyl (DPCB–OMe), 4-(trifluoromethyl)phenyl (DPCB–CF₃)). The palladium complexes [Pd(MeCN)₂(DPCB–Y)]X₂ (X = OTf, BF₄, BAr₄ (Ar = 3,5-bis(trifluoromethyl)phenyl)) were prepared by the reactions of DPCB–Y with [Pd(MeCN)₄]X₂, which were generated from Pd(OAc)₂ and HX in MeCN. On the other hand, the rhodium complexes [Rh(MeCN)₂(DPCB–Y)]OTf were prepared by the treatment of [Rh(μ-Cl)(cyclooctene)₂]₂ with DPCB–Y in CH₂Cl₂, followed by treatment with AgOTf in the presence of MeCN. The cationic complexes catalyzed conjugate addition of benzyl carbamate to α,β-unsaturated ketones.     

Formation of chiral ionic liquids and imidazol-2-ylidene metal complexes from the proteinogenic aminoacid l-histidine

Treatment of the amino acid derivative Bz-His-OMe with excess n-propyl bromide gave the corresponding histidinium salt [Bz-His(n-propyl)₂-OMe⁺Br⁻]. It features a melting point of 39 °C and may serve as a useful readily available optically active ionic liquid. Its subsequent treatment with silver oxide gave the corresponding l-histidine derived chiral N-heterocyclic carbene complex [“(carbene)₂Ag · AgBr₂”]. Transmetallation by treatment with Pd(CH₃CN)₂Cl₂ or [Rh(cod)Cl]₂ led to the formation of the respective chiral late metal imidazol-2-ylidene complexes [“(carbene)₂PdCl₂”] and [“(carbene)RhCl(cod)”], respectively. Four diastereomers of the square planar palladium system were observed. Due to the additional chirality center in the l-histidine-derived “Arduengo-carbene ligand” two diastereomers of the rhodium carbene complex were formed.     

The effect of bridgehead steric bulk on the ground state and intramolecular exchange processes of (μ-SCH2CR2CH2S)[Fe(CO)3][Fe(CO)2L] complexes

The flexibility of the coordination sphere in the diiron organometallic is likely an important design component in nature's electrocatalyst for proton reduction or H₂ oxidation, i.e, the active site of [FeFe]hydrogenase. A series of complexes, (μ-SCH₂CRR′CH₂S)[Fe(CO)₃][Fe(CO)₂L] with steric bulk incorporated into the μ-S-to-S linker was synthesized and the compounds were analyzed by infrared spectroscopy and cyclic voltammetry [(R/R′ = Me/Me, Et/Et, Bu/Et), (L = CO, PPh₃, IMes (1,3-bis(2,4,6-trimethylphenyl)-imidazol-2-ylidene), and IMe (1,3-dimethylimidazole-2-ylidene))]. While added steric bulk at the bridgehead carbon of the μ-SCH₂CR₂CH₂S produced little change in the ground state structures (X-ray diffraction) and electronic character for the (μ-SRS)[Fe(CO)₃]₂ complexes, monosubstitution of a CO with L produced distortions consistent with steric interference of the μ-SRS with nearby ligands as compared to the similar (μ-pdt)[Fe(CO)₃][Fe(CO)₂L] (pdt = S(CH₂)₃S). Variable temperature NMR studies have shown that the activation barrier for CO site exchange on the sterically bulky complexes decreases in a manner predicted by theory [J.W. Tye, M.B. Hall, M.Y. Darensbourg, Inorg. Chem. 45 (2006) 1552].     

Mono- and dinuclear cyclopalladates as catalysts for Suzuki–Miyaura cross-coupling reactions in predominantly aqueous media

Suzuki–Miyaura cross-coupling reactions of aryl halides with arylboronic acids were performed in predominantly aqueous media employing two mono- and two dinuclear cyclopalladated complexes as catalysts. These complexes are [Pd(HL)Cl] (I), [Pd(L)(PPh₃)] (II), [Pd₂(μ-dppb)(L)₂] (III) and [Pd₂(μ-dppf)(L)₂] (IV); where H₂L, dppb and dppf represent 4-methoxy-N′-(mesitylidene)benzohydrazide, 1,4-bis(diphenylphosphino)butane and 1,1′-bis(diphenylphosphino)ferrocene, respectively. The reactions were conducted using potassium carbonate as base in presence of tetrabutylammonium bromide (TBAB) at 70/90 °C in dimethylformamide–water (1:20) mixture. Among the four catalysts used, the dinuclear complex IV turned out to be the most effective and afforded moderate to excellent yields with broad substrate scope.     

Coordination chemistry of gold(II) with amidinate,thiolate and ylide ligands

Various reagents such as Cl₂, Br₂, I₂, benzoyl peroxide and CH₃I add to the dinuclear gold(I) amidinate complex [Au₂(2,6-Me₂Ph-form)₂] to form oxidative-addition gold(II) metal–metal bonded complexes. The gold–gold distance in the dinuclear complex decreases upon oxidative-addition with halogens from 2.7 to 2.5 Å, similar to observations made with dithiolate and ylide ligands. The sodium salt of the guanidinate Hhpp ligand, Hhpp = 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine reacts with (THT)AuCl in THF or CH₂Cl₂ to form a Au(II) complex, [Au₂(hpp)₂Cl₂], either by solvent oxidation or disproportionation of the Au(I) to Au(II) and the metal. Density functional theory (DFT) and MP2 calculations on [Au₂(hpp)₂Cl₂] find that the highest occupied molecular orbital (HOMO) is predominately hpp and chlorine-based with some Au–Au δ* character. The lowest unoccupied molecular orbital (LUMO) has metal-to-ligand (M–L) and metal-to-metal (M–M) σ* character (approximately 50% hpp/chlorine, and 50% gold). The charge-transfer character of the deeply colored solutions is observed in all the oxidative-addition products of the dinuclear gold(II) nitrogen ligands. This contrasts with the colors of the gold(II) ylide oxidative-addition products which are pale yellow. The colors of the crystalline gold(II) nitrogen complexes are dark orange to brown. This review will focus on the chemistry of gold(II) with nitrogen ligands and compare this with the well reviewed chemistry of gold(II) thiolate and ylide complexes.     

Dinuclear triple helical Mn(III), Fe(III) and Co(III) complexes

Synthesis, characterization and physical properties of the dinuclear triple helical complexes [Mn₂(μ-L)₃] (1), [Fe₂(μ-L)₃] (2) and [Co₂(μ-L)₃] (3) with the tetradentate Schiff base (H₂L) derived from 1 mol equiv. of hydrazine and 2 mole equiv. of 2-hydroxy-1-naphthaldehyde are described. Triple helical molecular structures of 2 and 3 have been confirmed by X-ray crystallography. Magnetic susceptibility measurements reveal complex 3 is diamagnetic while a weak antiferromagnetic interaction is operative between the metal centres in both 1 and 2.     

Dinuclear ruthenium(I) complexes of the type [Ru2(CO)4L2] with carboxylate or 2-pyridonate ligands: Evaluation as catalysts for olefin cyclopropanation with diazoacetates

Dinuclear ruthenium(I,I) carboxylate complexes [Ru₂(CO)₄(μ-OOCR)₂]_n (R = CH₃ (1a), C₃H₇ (1b), H (1c), CF₃ (1d)) and 2-pyridonate complex [Ru₂(CO)₄(μ-2-pyridonate)₂]_n (3) catalyze efficiently the cyclopropanation of alkenes with methyl diazoacetate. High yields are obtained with terminal nucleophilic alkenes (styrene, ethyl vinyl ether, α-methylstyrene), medium yields with 1-hexene, cyclohexene, 4,5-dihydrofuran and 2-methyl-2-butene. The E-selectivity of the cyclopropanes obtained from the monosubstituted alkenes and the cycloalkenes decreases in the order 1b > 1a > 1d > 1c. The cyclopropanation of 2-methyl-2-butene is highly syn-selective. Several complexes of the type [Ru₂(CO)₄(μ-L¹)₂]₂ (4) and (5), [Ru₂(CO)₄(μ-L¹)₂L²] (L² = CH₃OH, PPh₃) (6)–(9) and [Ru₂(CO)₄(CH₃CN)₂(μ-L¹)₂] (10) and (11), where L¹ is a 6-chloro- or 6-bromo-2-pyridonate ligand, are also efficient catalysts. Compared with catalyst 3, a halogen substituent at the pyridonate ligand affects the diastereoselectivity of cyclopropanation only slightly.     

Ferromagnetic interaction between [Ni(bdt)2]− anions in [Mn2(Saloph)2(μ-OH)][Ni(bdt)2](CH3CN)2

A new molecule-based magnetic material [Mn₂(Saloph)₂(μ-OH)][Ni(bdt)₂](CH₃CN)₂ was prepared by the metathesis of [Mn(Saloph)(H₂O)(ClO₄)] (S = 2) and TBA[Ni(bdt)₂] (S = 1/2). In the crystal, [Ni(bdt)₂]^? anions form square lattices which are separated from each other by the layers of antiferromagnetically coupled binuclear cations [Mn₂(Saloph)₂(μ-OH)]⁺. The magnetic susceptibility of the material coincides with the sum of the S = 2 van Vleck dimer model and S = 1/2 Heisenberg ferromagnetic square lattice model with 2J = ?92.4 and +4.5 K, respectively. The origin of the ferromagnetic interaction can be explained by the T-shaped intermolecular overlap mode of SOMOs which spreads to the ends of [Ni(bdt)₂]^? molecules.     

Synthesis,structure and magnetic properties of pyrazolate-bridged dinuclear complexes [{M(NCS)(4-Phpy)}2(μ-bpypz)2] (M = Co2+ and Fe2+)

The synthesis and magnetic characterization of pyrazolato-bridged dinuclear complexes [{M(NCS)(4-Phpy)}₂(μ-bpypz)₂] (Hbpypz = 3,5-bis(2-pyridyl)-pyrazole; 4-Phpy = 4-phenylpyridine; M = Co²⁺ (1) and Fe²⁺ (2)) are described together with the X-ray crystal analysis of the cobalt complex. The structure of 1 shows that the desired coordination has been achieved with the cobalt atoms being coordinated to two bpypz to form the dimer. The X-ray diffraction patterns show 1 and 2 to be isomorphous at room temperature. 2 displays a single spin-crossover transition between the [HS–HS] and [LS–LS] states with T_c = 150 K.