Cathodic performance of V2O5 nanowires and reduced graphene oxide composites for lithium ion batteries

In this study, vanadium pentoxide (V₂O₅) nanowires (NWs) with a diameter of 100–200 nm and a length of up to several micrometers as cathode for lithium ion batteries are synthesize using an electrospinning method. The reduced graphene oxide (rGO) and V₂O₅ NWs (GVO) composites are form by wet mixing the electrospun V₂O₅ NWs and rGO. Surface morphologies, microstructure and elemental mapping, and chemical bonding states of the composites are characterize. The initial and 60 cycles discharge capacities of GVO composite composed of 1 wt% rGO show up to 225 mAh g⁻¹ and 125 mAh g⁻¹, even higher than pure V₂O₅ NWs, when the lithium ion battery cycled between 2.0 and 4.0 V with a rate of 0.2 C, because of highly conductive rGO. The GVO composite could be promising as a high performance cathode for lithium ion batteries.     

Hierarchical nanowires for high-performance electrochemical energy storage

Nanowires are promising candidates for energy storage devices such as lithium-ion batteries, su- per（：apa.citors and lithium-air batteries. However, simple-structured nanowires have some limitations hence the strategies to make improvements need to be explored and investigated. Hierarchical nanowires with enhanced periormanee have been considered as an ideal candidate for energy storage due to the novel structures and/or synergistic properties. This review describes some of the recent progresses in the hierarchical nanowire merits, classification, synthesis and performance in energy storage applieat, ions. Herein we discuss the hierarchical nanowires based on their structural design from three major categories, including exterior design, interior design and aligned nanowire assembly. This review also briefly outlines the prospects of hierarchical nanowires in morphology control, property enhancement and application versatility.     

Dip-coated silver-doped V2O5 xerogels as host materials for lithium intercalation

Vanadium pentoxide xerogels have shown high electrochemical performance in terms of energy content. The high specific energy and high intercalation capability make the materials promising for thin film lithium battery and electrochromic device applications. In order to enhance the rate capabilities of the host we increased the electronic conductivity by doping the V₂O₅ xerogels with silver. Samples were prepared by mixing various amounts of silver powder with V₂O₅ hydrogel. We were able to prepare silver-doped vanadium pentoxide dip-coated thin films with a molar ratio (Ag/V) ranging from 0.005 to 0.5 (Ag_yV₂O₃ with y = 0.01, 0.1 and 1). With the successful doping, the electronic conductivity of V₂O₅ was increased by 2 to 3 orders of magnitude. The insertion capacity of the material was maintained and up to 4 moles of lithium per mole of silver-doped V₂O₅ (XRG) were found to be reversibly intercalated.     

Electrochemical properties of Cr doped V2O5 between 3.8 V and 2.0 V

Cr_0.1V₂O_5.15 was prepared by an oxalic acid assisted sol–gel method. X-ray diffraction showed that Cr doping induced a slight expansion (ΔV/V ≈ 2.3%) in the crystal lattice of V₂O₅. The electrochemical properties of Cr_0.1V₂O_5.15 in the potential range of 3.8–2.0 V were studied by cyclic voltammetry, galvanostatic charge–discharge cycling and potentiostatic intermittent titration technique. Cyclic voltammetry showed that the irreversible phase transition of V₂O₅ during the first cycle was effectively prevented by Cr doping. This caused the good charge–discharge cycling performance of the doped material. The discharge capacities were recorded to be 200, 170 and 120 mAhg^− 1 after fifty cycles at the C/10, C/2 and 1C rates, respectively. However, ex-situ X-ray diffraction showed that the crystal structure of the material was destroyed after long-term cycling. The lithium diffusion coefficient of Cr_0.1V₂O_5.15 varied between 10^− 11 and 10^− 12 cm² s^− 1, which was larger than that of crystalline V₂O₅, and was close to those of metal doped V₂O₅ in previous reports. The improvement in lithium diffusion kinetics was regarded as an important reason for the good electrochemical performance of Cr_0.1V₂O_5.15.     

Facile hydrothermal synthesis of ultrahigh-aspect-ratio V2O5 nanowires for high-performance supercapacitors

Ultrahigh-aspect-ratio V₂O₅ nanowires were successfully prepared using [VO(O₂)₂(OH₂)]⁻ as the starting material by a template-free hydrothermal route without the addition of organic surfactant or inorganic ions. The prepared samples were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmet–Teller (BET), cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD). The results revealed that the peroxovanadium (V) complexes can be easily transformed to V₂O₅ nanowires by this hydrothermal route. The uniform nanowires were with width about 50 nm and length about dozens of micron. The BET analysis showed the V₂O₅ nanowires had a high specific surface area of 25.6 m² g⁻¹. The synthesized V₂O₅ nanowires performed a high capacitance of 351 F g⁻¹ when used as supercapacitor electrode in 1 mol L⁻¹ LiNO₃.     

Synthesis and electrochemical performance of hole-rich Li4Ti5O12 anode material for lithium-ion secondary batteries

Hole-rich Li₄Ti₅O₁₂ composites are synthesized by spray drying using carbon nanotubes as additives in precursor solution, subsequently followed calcinated at high temperature in air. The structure, morphology, and texture of the as-prepared composites are characterized with XRD, Raman, BET and SEM techniques. The electrochemical properties of the as-prepared composites are investigated systematically by charge/discharge testing, cyclic voltammograms and AC impedance spectroscopy, respectively. In comparison with the pristine Li₄Ti₅O₁₂, the hole-rich Li₄Ti₅O₁₂ induced by carbon nanotubes exhibits superior electrochemical performance, especially at high rates. The obtained excellent electrochemical performances of should be attributed to the hole-rich structure of the materials, which offers more connection-area with the electrolyte, shorter diffusion-path length as well faster migration rate for both Li ions and electrons during the charge/discharge process.     

Elaboration and characterization of crystalline RF-deposited V2O5 positive electrode for thin film batteries

Investigations were realized on the microstructural and morphological evolution of RF-sputtered vanadium pentoxide thin films during growth. V₂O₅ thin films at different stages of growth were studied by spectroscopic ellipsometry, X-ray diffraction, atomic force microscopy and scanning electron microscopy. Film grain orientation, roughness and density were found to have notable evolution during growth. Electrochemical tests in liquid and solid electrolyte state configuration showed non-linear relationship between discharge capacity and V₂O₅ film thickness (<1 μm), which could be attributed in parts to the observed morphological and microstructural changes during growth, mainly the existence of a gradient density through film thickness and the pronounced top surface roughness.     

XPS investigations achieved on the first cycle of V2O5 thin films used in lithium microbatteries

Vanadium pentoxide thin films, usable as positive electrode in microbatteries, have been prepared by radio frequency magnetron sputtering in a pure argon or mixed argon/oxygen plasma. Depending on the oxygen pressure in the discharge gas, we have obtained either crystallized or amorphous thin films. These two kinds of thin films having different electrochemical behavior, an extensive X-ray photoelectron spectroscopy (XPS) study (especially suited for thin films analysis) was carried out. The main redox processes occurring during the first discharge–charge cycle were identified. In addition, depending on the crystalline or amorphous character of the samples, we have noticed some differences concerning the kinetic of reduction. Furthermore, the growth of a surface layer between the cathode and the liquid electrolyte was evidenced upon the discharge as well as its partial dissolution upon the charge.     

XAS and electrochemical characterization of lithium intercalated V2O5 xerogels

The use of sol-gel processes in the preparation of cathode materials is of growing interest because of their ease and flexibility. The electrochemical properties, e.g. the rate of lithium intercalation, appear to depend on the morphology of the thin-film vanadium oxide xerogels that can be changed by modifying the preparation. In this context, in order to extend the study to bulk materials, xerogel powder samples with surface areas in the range 2–5 m²/g have been prepared from pure vanadium pentoxide hydrogels, or in the form of composites, from carbon powder added to hydrogels. The electrochemical properties have been correlated with the morphological and structural changes induced by the presence of carbon using X-ray and XAS spectroscopy.     

Charge storage performance of lithiated iron phosphate/activated carbon composite as symmetrical electrode for electrochemical capacitor

In this study, a symmetric electrochemical capacitor was fabricated by adopting a lithium iron phosphate (LiFePO₄)-activated carbon (AC) composite as the core electrode material in 1.0 M Na₂SO₃ and 1.0 M Li₂SO₄ aqueous electrolyte solutions. The composite electrodes were prepared via a facile mechanical mixing process. The structural properties of the nanocomposite electrodes were characterised by scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET) analysis. The electrochemical performances of the prepared composite electrode were studied using cyclic voltammetry (CV), galvanostatic charge–discharge (CD) and electrochemical impedance spectroscopy (EIS). The experimental results reveal that a maximum specific capacitance of 112.41 F/g was obtained a 40 wt% LiFePO₄ loading on an AC electrode compared with that of a pure AC electrode (76.24 F/g) in 1 M Na₂SO₃. The improvement in the capacitive performance of the 40 wt% LiFePO₄–AC composite electrode is believed to be attributed to the contribution of the synergistic effect of the electric double layer capacitance (EDLC) of the AC electrode and pseudocapacitance via the intercalation/extraction of H⁺, OH⁻, Na⁺ and SO₃²⁻ and Li⁺ ions in LiFePO₄ lattices. In contrast, it appears that the incorporation of LiFePO₄ into AC electrodes does not increase the charge storage capability when Li₂SO₄ is used as the electrolyte. This behaviour can be explained by the fact that the electrolyte system containing SO₄²⁻ only exhibits EDLC in the Fe-based electrodes. Additionally, Li⁺ ions that have lower conductivity and mobility may lead to poorer charge storage capability compared to Na⁺ ions. Overall, the results reveal that the AC composite electrodes with 40 wt% LiFePO₄ loading on a Na₂SO₃ neutral electrolyte exhibit high cycling stability and reversibility and thus display great potential for electrochemical capacitor applications.     

Ultrasound-assisted synthesis of Li-rich mesoporous LiMn2O4 nanospheres for enhancing the electrochemical performance in Li-ion secondary batteries

The hierarchically structured mesoporous LiMn₂O₄ (LMO) nanospheres were synthesized using a template-free self-assembly process that was coupled with ultrasound (U). The ultrasound technique suggested here is very powerful for controlling an ordered nanostructure and improving crystallinity with large single-crystalline domains. Owing to the hierarchical mesoporous structure and high crystallinity, U-LMO provides an excellent rate capability and cycle stability with a capacity retention of more than 98% up to 50 cycles at a 0.2 C rate. Here, we demonstrate that mesoporous U-LMO nanospheres were fabricated to enhance the electrochemical performance and protect it from structurally significant collapsing because of high crystallinity.     

Preparation, characterization and electrochemical performance of γ-MnO2 and LiMn2O4 as cathodes for lithium batteries

The spinel LiMn₂O₄ is a very promising cathode material with economical and environmental advantages. LiMn₂O₄ materials have been synthesized by solid state method using γ-MnO₂ as manganese source, and Li₂CO₃ or LiNO₃ as Li sources. γ-MnO₂ is a commercial battery grade electrolytic manganese dioxide (TOSOH-Hellas GH-S) and LiMn₂O₄ samples were synthesized at a calcinations temperature up to 800 °C. γ-MnO₂ and LiMn₂O₄ samples were characterized by X-ray diffraction, thermal and electrochemical measurements. X-ray powder diffraction of as prepared LiMn₂O₄ showed a well-defined highly pure spinel single phase. The electrochemical performance of LiMn₂O₄ and its starting material γ-MnO₂ was evaluated through cyclic voltammetry, galvanostatic (constant current charge-discharge cycling) The electrochemical properties in terms of cycle performance were also discussed. γ-MnO₂ showed fairly high initial capacity of about 200 mAhg⁻¹ but poor cycle performance. LiMn₂O₄ samples showed fairly low initial capacity but good cycle performance.     

Influence of NiCl2 modification on the electrochemical performance of LiV3O8 cathode for lithium ion batteries

The 5.0, 8.0, and 10.0 wt% NiCl₂-modified LiV₃O₈ materials are successfully prepared and the effects of NiCl₂ modification on the electrochemical performance of LiV₃O₈ cathode have been investigated. The structural and surface morphologic properties of synthesized materials are characterized by X-ray diffraction and scanning electron microscopy. The electrochemical properties are investigated by charge–discharge testing and cyclic voltammetry. It is found that 8.0 wt% NiCl₂-modified LiV₃O₈ shows excellent electrochemical properties. The initial discharge capacity of 8.0 wt% NiCl₂-modified LiV₃O₈ is much higher than that of pristine LiV₃O₈, and can attain 336.7 mAh g^?1 at the current rate of 0.5 C (300 mA g^?1 is assumed to be 1 C rate). Additionally, NiCl₂ modification significantly improves the cyclability of LiV₃O₈. The NiCl₂ modification is shown to be able to suppress the capacity fade of LiV₃O₈ without specific capacity expense by suppressing the characteristic phase transitions during cycling.     

Hydrothermal synthesis of spinel Li1+x Mn2O4 as cathode material for rechargeable lithium battery

Abstract

The hydrothermal synthesis of Li-Mn spinel oxide (Li_1+xMn₂O₄) was undertaken in order to develop high quality, low cost cathode material for a rechargeable lithium battery. In our experiments, γ-MnOOH, LiOH · H₂O and H₂O₂ were used as starting materials to synthesize Li-Mn spinel oxide under hydrothermal conditions of 180-230°C and about 1.0-2.8 MPa. The chemical composition and particle size of the Li_1+xMn₂O₄ is easily controlled in the hydrothermal reaction. The Li_1+xMn₂O₄ produced was characterized by X-ray diffraction, with the spinel phase having a Li/Mn ratio of 0.50-0.60. There is convincing evidence, as a result of this work, that our synthesis process is most suitable for producing high quality cathode material that can be used in a rechargeable lithium battery.     

Electrochemical and structural properties of MoO3–V2O5 nanocomposite thin film electrodes for lithium rechargeable batteries

We have investigated the electrochemical properties of V₂O₅-based thin film electrodes as a function of the amount of MoO₃ by means of X-ray diffraction (XRD), X-ray photoemission spectroscopy (XPS), and transmission electron microscopy (TEM). XRD results show that the V₂O₅-based thin film electrodes give an amorphous characteristic. XPS results reveal the formation of V₂O₅ and MoO₃ phases. TEM results show that MoO₃ dots (5–30 nm in size) are embedded in the amorphous V₂O₅ matrix. It is further shown that cells fabricated with the MoO₃–V₂O₅ nanocomposite thin film electrodes give better cycling performance than those made with the single V₂O₅ thin film electrodes. A possible explanation for the MoO₃ nano-dot dependence on the cycling performance of the V₂O₅-based thin film electrodes is described.     

Enhanced performance of bi-layer Nb2O5 coated TiO2 nanoparticles/nanowires composite photoanode in dye-sensitized solar cells

Dye sensitized solar cells (DSSCs) were fabricated based on coumarin NKX-2700 dye sensitized bi-layer photoanode and quasi-solid state electrolyte sandwiched together with cobalt sulfide coated counter electrode. A novel bi-layer photoanode has been prepared using composite mixtures of 90 wt.% TiO₂ nanoparticles + 10 wt.% TiO₂ nanowires (TNPWs) as active layer and Nb₂O₅ is coated on the active layer, which acts as scattering layer. Hafnium oxide (HfO₂) was applied over the TNPWs/Nb₂O₅ photoanode film, as a blocking layer. TiO₂ nanoparticles (TNPs), TiO₂ nanowires (TNWs) and TNPWs/Nb₂O₅ were characterized by X-ray diffractometer (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM). The sensitizing organic dye coumarin NKX-2700 displayed maximum absorption wavelength (λ_max) at 525 nm, which could be observed from the UV–vis spectrum. DSSC-1 fabricated with composite bi-layer photoanode revealed enhanced photo-current efficiency (PCE) as compared to other DSSCs and illustrated photovoltaic parameters; short-circuit current J_SC = 18 mA/cm², open circuit voltage (V_OC) = 700 mV, fill factor (FF) = 64% and PCE (η) = 8.06%. The electron transport and charge recombination behaviors of DSSCs were investigated by electrochemical impedance spectra (EIS) and the results illustrated that the DSSC-1 showed the lowest charge transport resistance (R_tr) and the longest electron lifetime (τ_eff). Therefore, in the present investigation, it could be concluded that the novel bi-layer photoanode with blocking layer increased the short circuit current, electron transport and suppressed the recombination of charge carriers at the photoanode/dye/electrolyte interface in DSSC-1.     

Efficiently enhanced energy storage performance of Ba2Bi4Ti5O18 film by co-doping Fe3+ and Ta5+ ion with larger radius

We present an efficient strategy, that is the co-substitution of Fe³⁺ and Ta⁵⁺ ions with large radius for Ti⁴⁺ ion, to enhance energy storage performance of Ba₂Bi₄Ti₅O₁₈ film. For the films co-doped with Fe³⁺ and Ta⁵⁺ ions, the maximum polarization under the same external electric field is improved because the radius of Fe³⁺ and Ta⁵⁺ ions is larger than that of Ti⁴⁺ ion. Moreover, due to the composition and chemical disorder, the relaxor properties are also slightly improved, which can not be achieved by the film doped with Fe³⁺ ions only. What is more, for the films doped with Fe³⁺ ion only, the leakage current density increases greatly due to the charge imbalance, resulting in a significant decrease in breakdown strength. It is worth mentioning that the breakdown strength of Fe³⁺ and Ta⁵⁺ ions co-doped film does not decrease due to the charge balance. Another important point is the recoverable energy storage density of the films co-doped with Fe³⁺ and Ta⁵⁺ ions has been greatly improved based on the fact that the maximum external electric field does not decrease and the maximum polarization under the same external electric field increases. On top of that, the hysteresis of the polarization has also been improved. Finally, the co-doped films with Fe³⁺ and Ta⁵⁺ ions have good frequency and temperature stability.     

Photocatalytic performance of TiO2/V2O5 nanocomposite powder prepared by DC arc plasma

TiO₂/V₂O₅ nanocomposite powder was synthesized by the DC arc plasma, and its photocatalytic activity was examined by decompositions of Rhodamine B solution and toluene gas. In the synthesis of TiO₂/V₂O₅ nanocomposite powder, TiCl₄ and VOCl₃ precursors were introduced into thermal plasma flame with argon carrier gases through separated two gas bubblers. They were decomposed by Ar–N₂ thermal plasma generating Ti and V vapors, followed by the formation of oxides with the injection of additional oxygen into a plasma reactor. Nanocomposite composed of relatively small size V₂O₅ nanoparticles on a spherical TiO₂ nanoparticle which was about 250 nm in diameter was identified by X-ray diffractometry, electronic microscopy, and energy dispersive spectroscopy when the ratio of carrier gas flow rates for TiCl₄ to VOCl₃ was 1:4 or 1:5. In ultraviolet–visible absorption spectroscopy, the absorbed wavelength of light for synthesized TiO₂/V₂O₅ nanocomposite powder was wider than that for commercially available TiO₂ nanopowder. Therefore, Rhodamine B solution exposed to visible light was decomposed by TiO₂/V₂O₅ nanocomposite, whereas it was not decomposed by TiO₂ nanopowder. In addition, toluene decomposition in a dielectric barrier discharge reactor was carried out with nano-sized photocatalysts of TiO₂ nanopowder and TiO₂/V₂O₅ nanocomposite. Relatively higher removal rate of toluene was found in the case of TiO₂/V₂O₅ nanocomposite in virtue of improved photocatalytic performance.     

Improving electrochemical performance of spherical LiMn2O4 cathode materials for lithium ion batteries by Al-F codoping and AlF3 surface coating

Ionics - In this paper, combination of both codoping and coating with Al, F compounds on spherical LiMn2O4 is studied to obtain an improved charge/discharge cycling performance. Firstly, Al,...