Synthesis and photophysical properties of borondipyrromethene dyes bearing aryl substituents at the boron center

Several borondipyrromethene (Bodipy) dyes bearing an aryl nucleus linked directly to the boron center have been prepared under mild conditions. The choice of Grignard or lithio organo-metallic reagents allows the isolation of B(F)(aryl) or B(aryl)2 derivatives; where aryl refers to phenyl, anisyl, naphthyl, or pyrenyl fragments. A single crystal, X-ray structure determination for the bis-anisyl compound shows that the sp3 hybridized boron center remains pseudo-tetrahedral and that the B-C bond distances are 1.615 and 1.636 A. All compounds are electrode active but replacement of the fluorine atoms by aryl fragments renders the Bodipy unit more easily oxidized by 100 mV in the B(F)(aryl) and 180 mV in the B(aryl)2 compounds whereas reduction is made more difficult by a comparable amount. Strong fluorescence is observed from the Bodipy fluorophore present in each of the new dyes, with the radiative rate constant being independent of the nature of the aryl substituent. The fluorescence quantum yields are solvent dependent and, at least in some cases (aryl = anisyl or pyrenyl), nonradiative decay from the first-excited singlet state is strongly activated. There is no indication, however, for population of a charge-transfer state, in which the aryl substituent acts as donor and the Bodipy fragment functions as acceptor, that is strongly coupled to the ground state. Instead, it is conjectured that nonradiative decay involves a conformational change driven by the solvophobic effect. Thus, the rate of nonradiative decay in any given solvent increases with increasing surface accessibility (or molar volume) of the aryl substituent. Intramolecular energy transfer from pyrene or naphthalene residues to Bodipy is quantitative.     

Amino acid promoted CuI-catalyzed C-N bond formation between aryl halides and amines or N-containing heterocycles

CuI-catalyzed coupling reaction of electron-deficient aryl iodides with aliphatic primary amines occurs at 40 degrees C under the promotion of N-methylglycine. Using l-proline as the promoter, coupling reaction of aryl iodides or aryl bromides with aliphatic primary amines, aliphatic cyclic secondary amines, or electron-rich primary arylamines proceeds at 60-90 degrees C; an intramolecular coupling reaction between aryl chloride and primary amine moieties gives indoline at 70 degrees C; coupling reaction of aryl iodides with indole, pyrrole, carbazole, imidazole, or pyrazole can be carried out at 75-90 degrees C; and coupling reaction of electron-deficient aryl bromides with imidazole or pyrazole occurs at 60-90 degrees C to provide the corresponding N-aryl products in good to excellent yields. In addition, N,N-dimethylglycine promotes the coupling reaction of electron-rich aryl bromides with imidazole or pyrazole to afford the corresponding N-aryl imidazoles or pyrazoles at 110 degrees C. The possible action of amino acids in these coupling reactions is discussed.     

Ni-catalyzed activation of α-chloroesters: a simple method for the synthesis of α-arylesters and β-hydroxyesters

Coupling reactions of α-chloroesters with aryl halides (α-arylation) or carbonyl compounds (Reformatsky) using nickel catalyst allow, under mild conditions, the preparation of various functionalized aryl propionic acid derivatives or β-hydroxyesters. In the synthesis of aryl propionic acid derivatives, the process is efficient with aryl halides bearing either electron-withdrawing or electron-donating groups.     

One-pot synthesis of acenaphtho[1,2-b]furan derivatives

New 9-(alkyl or aryl)acenaphtho[l,2-b]furan-8-(alky or aryl)amine compounds has herein been reported by one-pot reaction of (acenaphthylen-l-yloxy)trimethylsilane,alkyl and aryl aldehydes,and aryl and alky isocyanides in refluxing DMF.     

Highly efficient synthesis of phenols by copper-catalyzed hydroxylation of aryl iodides, bromides, and chlorides

8-Hydroxyquinolin-N-oxide was found to be a very efficient ligand for the copper-catalyzed hydroxylation of aryl iodides, aryl bromides, or aryl chlorides under mild reaction conditions. This methodology provides a direct transformation of aryl halides to phenols and to alkyl aryl ethers. The inexpensive catalytic system showed great functional group tolerance and excellent selectivity.     

Mild method for Ullmann coupling reaction of amines and aryl halides

[reaction: see text] Ullmann-type aryl amination of aryl iodides and aryl bromides in DMSO at 40-90 degrees C gave the corresponding N-arylamines or N,N-diarylamines in good to excellent yields by using either N-methylglycine or L-proline as the ligand.     

A general strategy for the perfluoroalkylation of arenes and arylbromides by using arylboronate esters and [(phen)CuR(F)

A versatile method for the synthesis of aryl perfluoroalkanes from arenes and aryl bromides is described. Substituted arenes or aryl bromides are converted in situ to an aryl boronate ester that readily undergoes perfluoroalkylation in air with [(phen)CuR(F)]. A broad range of aryl bromide substrates were perfluoroalkylated in good yield for the first time. [(phen)CuCF(3)] is now commercially available and has been prepared on 20?g scale.     

O,O-二烷基S-烷基(芳基)二硫代磷酸酯的异构化氯化反应——合成S-烷基S-烷基(芳基)二硫代磷酸衍生物的新方法

报道了合成S-烷基S-烷基(芳基)二硫代磷酸衍生物的一种便利的新方法。O,O-二烷基S-烷基(芳基)二硫代磷酸酯与三氯氧磷发生氯化反应的同时,伴随着P=S键异构成P-S键,生成S-烷基S-烷基(芳基)二硫代磷酰氯,在碱存在下进一步与各种亲核试剂反应,得到S-烷基S-烷基(芳基)二硫代磷酸衍生物。     

Improved studies of cross‐coupling reactions of 5‐(tri‐n‐butystannyl)‐ and 5,5′‐bis(tri‐n‐butylstannyl)‐2,2′‐bithiophene with aryl halides

Stille coupling under standard conditions proceeds in low yield when using hindered organostannanes (1) or (2) and aryl bromide partners. The inclusion of aryl iodide instead of aryl bromide with the same organostannanes, significantly improves the efficiency of the coupling, providing a variety of desired products in good to excellent yield. The yields of Stille coupling are compared to the different reactivity of aryl halides. This study of Stille coupling with different aryl halides are documented and rationalized.     

Rapid, easy cyanation of aryl bromides and chlorides using nickel salts in conjunction with microwave promotion

We report here a fast, easy, and efficient method for the preparation of aryl nitriles from aryl bromides and chlorides. The methodology for aryl bromides involves the use of either Ni(CN)(2) or NaCN and NiBr(2). With aryl chlorides, a mix of NaCN and NiBr(2) is used and the reaction proceeds via the in situ formation of the corresponding aryl bromide. The reaction can be performed in air and is complete within 10 min.     

Palladacycle-Catalyzed Carbonylation of Aryl Iodides or Bromides with Aryl Formates

An efficient palladacycle-catalyzed aromatic carbonylation reaction of aryl formates with aryl iodides or bromides has been developed. Commercially available and easily prepared aryl formates were employed as carbonyl sources without the use of external carbon monoxide. The present catalytic system shows broad functional group tolerance and affords aryl benzoate derivatives in good to excellent yields.     

Diphenyl disulfide and sodium in NMP as an efficient protocol for in situ generation of thiophenolate anion: selective deprotection of aryl alkyl ethers and alkyl/aryl esters under nonhydrolytic conditions

Aryl methyl ethers, methyl esters, aryl esters, and aryl sulfonates are chemoselectively deprotected under nonhydrolytic conditions by treatment with Ph(2)S(2) (0.6 equiv) and Na (1.6 equiv) in NMP under reflux or at 90 degrees C. Quantitative utilization of the 'PhS' moiety as the effective nucleophilic species represents conservation of atom economy. Other solvents such as HMPA, DMPU, DMEU, and DMF afforded comparable results. Chloro, nitro, aldehyde, alpha,alpha-diketone, and alpha,beta-unsaturated ketone functionalities remain unaffected. The deprotection was found to take place in the order aryl ester > alkyl ester > aryl alkyl ether. Substrates bearing strong electron-withdrawing groups react at a faster rate than those not having such substitution. The differences in rate of reaction has been exploited for selective deprotection for intramolecular competition. An aryl acetate/benzoate is deprotected selectively in preference to a methyl ester or aryl methyl ether. Selective deprotection of a methyl ester is observed in the presence of an aryl alkyl ether.     

Copper-diamine-catalyzed N-arylation of pyrroles, pyrazoles, indazoles, imidazoles, and triazoles

This paper details the copper-catalyzed N-arylation of pi-excessive nitrogen heterocycles. The coupling of either aryl iodides or aryl bromides with common nitrogen heterocycles (pyrroles, pyrazoles, indazoles, imidazoles, and triazoles) was successfully performed in good yield with catalysts derived from diamine ligands and CuI. General conditions were found that tolerate functional groups such as aldehydes, ketones, alcohols, primary amines, and nitriles on the aryl halide or heterocycle. Hindered aryl halides or heterocycles were also found to be suitable substrates using the conditions reported herein.     

Sonogashira reaction of aryl halides with propiolaldehyde diethyl acetal catalyzed by a tetraphosphine/palladium complex

All-cis-1,2,3,4-Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ efficiently catalyzes the Sonogashira reaction of propiolaldehyde diethyl acetal with a variety of aryl bromides and chlorides. A minor electronic effect of the substituents of the aryl bromide was observed. Similar reaction rates were observed in the presence of activated aryl bromides such as 4-trifluoromethylbromobenzene and deactivated aryl bromides such as bromoanisole. Turnover numbers up to 95,000 can be obtained for this reaction. Even aryl chlorides and heteroarylbromides or chlorides have been successfully alkynylated with this catalyst. Moreover, a wide variety of substituents on the aryl halide such as fluoro, trifluoromethyl, acetyl, benzoyl, formyl, nitro, dimethylamino or nitrile are tolerated.     

Synthesis of enantiomerically-enriched N-aryl amino-amides via a Jocic-type reaction

Enantiomerically-enriched secondary trichloromethyl-alcohols react with aryl amines to give enantiomerically-enriched α-N-arylamino-acid derivatives. The intermediate acid chlorides can react in situ with aryl or, regioselectively, with alkyl amines to give aryl or alkyl α-N-arylamino amides.     

Copper-catalyzed N-arylation of 2-arylindoles with aryl halides

10 mol% Cul combined with the DMEDA ligand can efficiently catalyze the N-arylation of 2-arylindoles with aryl iodides and aryl bromides in good to excellent yields. The aryl halides bearing electron-rich or electron-deficient functional groups can be well tolerated under this mild reaction conditions.     

Selective Heck reaction of aryl bromides with cyclopent-2-en-1-one or cyclohex-2-en-1-one

The selective Heck reaction of cyclopent-2-en-1-one or cyclohex-2-en-1-one with aryl bromides gives a simple access to the corresponding 3-arylcycloalk-2-en-1-ones. The choice of the base was found to be crucial to avoid the formation of 3-arylcyclopentanones or 3-arylcyclohexanones as side-products. Using KF as base, DMF as solvent and Pd(OAc)₂ as catalyst, the target products were obtained in moderate to good yields with a variety of aryl bromides. Substituents such as fluoro, trifluoromethyl, acetyl, benzoyl, formyl, ester or nitrile on the aryl bromide are tolerated. Sterically congested aryl bromides or bromopyridines can also be employed.     

Air stable,sterically hindered ferrocenyl dialkylphosphines for palladium-catalyzed C[bond]C,C[bond]N,and C[bond]O bond-forming cross-couplings

Pentaphenylferrocenyl di-tert-butylphosphine has been prepared in high yield from a two-step synthetic procedure, and the scope of various cross-coupling processes catalyzed by complexes bearing this ligand has been investigated. This ligand creates a remarkably general palladium catalyst for aryl halide amination and for Suzuki coupling. Turnovers of roughly 1000 were observed for aminations with unactivated aryl bromides or chlorides. In addition, complexes of this ligand catalyzed the formation of selected aryl ethers under mild conditions. The reactions encompassed electron-rich and electron-poor aryl bromides and chlorides. In the presence of catalysts containing this ligand, these aryl halides coupled with acyclic or cyclic secondary alkyl- and arylamines, with primary alkyl- and arylamines, and with aryl- and primary alkylboronic acids. These last couplings provide the first general procedure for reaction of terminal alkylboronic acids with aryl halides without toxic or expensive bases. The ligand not only generates highly active palladium catalysts, but it is air stable in solution and in the solid state. Palladium(0) complexes of this ligand are also air stable as a solid and react only slowly with oxygen in solution.     

Carbon-oxygen bond formation in the mass spectra of aryl methyl sulphones

Upon electron-impact aryl methyl sulphones (I) rearranged to form aryl-oxygen bonds. The mode of fragmentation of the intermediate ester (II) to give [aryl O]⁺ or [aryl OH]⁺ ions was found to be markedly influenced by the nature of the aryl substituent.     

One-pot synthesis of symmetrical and unsymmetrical aryl sulfides by Pd-catalyzed couplings of aryl halides and thioacetates

Aryl sulfides were obtained from the coupling reaction of S-aryl (or S-alkyl) thioacetates and aryl bromides in the presence of palladium catalyst. This reaction method enables the one-pot synthesis of symmetrical and unsymmetrical diaryl sulfides by employing potassium thioacetate with aryl iodides and aryl bromides.