The reaction of carbon monoxide with platinum ylids

The platinum(II) ylids [X₂Pt{CH(py)CH₂CH₃}(py)] (X = Cl, Br; PY = pyridine) react with carbon monoxide to give the platinum carbonyls [CO(X₂)Pt{CH(py)CH₂CH₂CH₃}] which lose CO on heating or in solution. The platinum(IV) ylids [Cl₄Pt{CH(py)CH₂CH₃}(py)] and[Cl₂I(CH₃)Pt{CH(py)CH₂CH₃}(py)] also react with CO to give Pt(CO)-ylid compounds.     

Low-Dimensional Architectures in Isomeric cis-PtCl2{Ph2PCH2N(Ar)CH2PPh2} Complexes Using Regioselective-N(Aryl)-Group Manipulation

The solid-state behaviour of two series of isomeric, phenol-substituted, aminomethylphosphines, as the free ligands and bound to Pt^II, have been extensively studied using single crystal X-ray crystallography. In the first library, isomeric diphosphines of the type Ph₂PCH₂N(Ar)CH₂PPh₂ [1a–e; Ar = C₆H₃(Me)(OH)] and, in the second library, amide-functionalised, isomeric ligands Ph₂PCH₂N{CH₂C(O)NH(Ar)}CH₂PPh₂ [2a–e; Ar = C₆H₃(Me)(OH)], were synthesised by reaction of Ph₂PCH₂OH and the appropriate amine in CH₃OH, and isolated as colourless solids or oils in good yield. The non-methyl, substituted diphosphines Ph₂PCH₂N{CH₂C(O)NH(Ar)}CH₂PPh₂ [2f, Ar = 3-C₆H₄(OH); 2g, Ar = 4-C₆H₄(OH)] and Ph₂PCH₂N(Ar)CH₂PPh₂ [3, Ar = 3-C₆H₄(OH)] were also prepared for comparative purposes. Reactions of 1a–e, 2a–g, or 3 with PtCl₂(η⁴-cod) afforded the corresponding square-planar complexes 4a–e, 5a–g, and 6 in good to high isolated yields. All new compounds were characterised using a range of spectroscopic (¹H, ³¹P{¹H}, FT–IR) and analytical techniques. Single crystal X-ray structures have been determined for 1a, 1b∙CH₃OH, 2f∙CH₃OH, 2g, 3, 4b∙(CH₃)₂SO, 4c∙CHCl₃, 4d∙½Et₂O, 4e∙½CHCl₃∙½CH₃OH, 5a∙½Et₂O, 5b, 5c∙¼H₂O, 5d∙Et₂O, and 6∙(CH₃)₂SO. The free phenolic group in 1b∙CH₃OH, 2f∙CH₃OH_, 2g, 4b∙(CH₃)₂SO, 5a∙½Et₂O, 5c∙¼H₂O, and 6∙(CH₃)₂SO exhibits various intra- or intermolecular O–H∙∙∙X (X = O, N, P, Cl) hydrogen contacts leading to different packing arrangements.     

Tetrakisisopropoxy tantalum(V)O,O′-alkylene dithiophosphate complexes

Summary Tetrakisisopropoxytantalum(V) alkylene dithiophosphato complexes, (G=–CMe₂CMe₂–, –CHMeCHMe–, –CH₂CMe₂CH₂– and –CH₂CEt₂CH₂–) have been prepared from equimolar ratios of tantalum(V) isopropoxide and alkylene dithiophosphoric acids in benzene. These moisture-sensitive compounds, which are soluble in common organic solvents and are monomeric, have been characterized by elemental analysis, molecular weight determinations and by their i.r. and n.m.r. spectra. An octahedral geometry is suggested in which the ligand is bidentate.     

Bis(2-t-butylphenyl)phosphonoacetamides for the highly cis-selective synthesis of α,β-unsaturated amides

New Horner–Wadsworth–Emmons reagents, (o-t-BuPhO)₂P(O)CH₂CONMe(OMe) and (o-t-BuPhO)₂P(O)CH₂CON(CH₂CH₂) ₂O were prepared via the Arbuzov reaction in good yields. The HWE reaction of these reagents with a variety of aldehydes gave cis-α,β-unsaturated amides with high selectivity in almost quantitative yields.     

2-(Trialkoxysilylalkylthio)ethyl vinyl sulfides

Conclusions Trialkoxysilylalkanethiols (CH₃O)₃Si(CH₂)_nSH (n=1–3) react with divinyl sulfide at 100–110° to give 2-(trialkoxysilylalkylthio)ethyl vinyl sulfides (CH₃O)₃Si(CH₂)_nS (CH₂)₂SCH=CH₂ in high yield. The reactivity of the trialkoxysilylalkanethiols decreases with increase in the number of CH₂ groups between the S and Si atoms. A second molecule of the organosilicon thiol acids adds with difficulty to divinyl sulfide to give the diadduct.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 197–199, January, 1977.     

Reactions of nickelocene with lithium and magnesium alkyls containing β-hydrogen atoms

The reaction of nickelocene with BrMgR, where R=CH₂CH(CH₃)C₆H₅, C₂H₅, (CH₂)₇CH₃ and CH₂CH₂CH₃, have been studied. It was found that the presence of β-hydrogen in R did not cause the total splitting of the carbon–nickel bond but alkylidynetrinickel clusters were formed. It is the first example of the synthesis of alkylidynetrinickel clusters (NiCp)₃CR′ from the organonickel species possessing β-hydrogen. Besides trinickel clusters, the following compounds were always formed in all the studied reactions: (NiCp)₄H₂, (NiCp)₆, CpNi(η³-C₅H₇) and (NiCp)₂(μ-C₅H₆). The structure of (NiCp)₃CCH(CH₃)Ph has been determined by a single-crystal X-ray diffraction study.     

Lithiated γ-O-functionalized propyl phenyl sulfides and sulfones of the type Li[CH(SOxPh)CH2CH2OR] (x = 0, 2). [Li{CH(SPh)CH2CH2Ot-Bu}(tmeda)] – A structurally characterized organolithium inner complex

Lithiation of O-functionalized alkyl phenyl sulfides PhSCH₂CH₂CH₂OR (R = Me, 1a; i-Pr, 1b; t-Bu, 1c; CPh₃, 1d) with n-BuLi/tmeda in n-pentane resulted in the formation of α- and ortho-lithiated compounds [Li{CH(SPh)CH₂CH₂OR}(tmeda)] (α-2a–d) and [Li{o-C₆H₄SCH₂CH₂CH₂OR)(tmeda)] (o-2a–d), respectively, which has been proved by subsequent reaction with n-Bu₃SnCl yielding the requisite stannylated γ-OR-functionalized propyl phenyl sulfides n-Bu₃SnCH(SPh)CH₂CH₂OR (α-3a–d) and n-Bu₃Sn(o-C₆H₄SCH₂CH₂CH₂OR) (o-3a–d). The α/ortho ratios were found to be dependent on the sterical demand of the substituent R. Stannylated alkyl phenyl sulfides α-3a–c were found to react with n-BuLi/tmeda and n-BuLi yielding the pure α-lithiated compounds α-2a–c and [Li{CH(SPh)CH₂CH₂OR}] (α-4a–b), respectively, as white to yellowish powders. Single-crystal X-ray diffraction analysis of [Li{CH(SPh)CH₂CH₂Ot-Bu}(tmeda)] (α-2c) exhibited a distorted tetrahedral coordination of lithium having a chelating tmeda ligand and a C,O coordinated organyl ligand. Thus, α-2c is a typical organolithium inner complex.Lithiation of O-functionalized alkyl phenyl sulfones PhSO₂CH₂CH₂CH₂OR (R = Me, 5a; i-Pr, 5b; CPh₃, 5c) with n-BuLi resulted in the exclusive formation of the α-lithiated products Li[CH(SO₂Ph)CH₂CH₂OR] (6a–c) that were found to react with n-Bu₃SnCl yielding the requisite α-stannylated compounds n-Bu₃SnCH(SO₂Ph)CH₂CH₂OR (7a–c). The identities of all lithium and tin compounds have been unambiguously proved by NMR spectroscopy (¹H, ¹³C, ¹¹⁹Sn).     

Assembly and Dissociation of Α-Cyclodextrin [2]Pseudorotaxanes with α,ω-Bis(N-(N,N′-dimethylethylenediamine)alkane Threads

A series of novel bischelate bridging ligands, CH₃NH(CH₂)₂N(CH₃)(CH₂)_nN(CH₃)(CH₂)₂NHCH₃ (n = 9, 10, 11, and 12) were synthesized as hydrochloride salts and characterized by elemental analyses, electrospray mass spectrometry, and ¹H and ¹³C NMR spectroscopy. These ligands form [2]pseudorotaxanes with α-cyclodextrin (α-CD) and the stability constants have been determined from ¹H NMR titrations in D₂O. The kinetics and mechanism of the assembly and dissociation of a [2]pseudorotaxane in which α-CD has been threaded by the CH₃NH₂(CH₂)₂N(CH₃)(CH₂)₁₂N(CH₃)(CH₂)₂NH₂CH₃²⁺ ligand were determined in aqueous solution using ¹H NMR spectroscopy. A weak inclusion of the dimethylethylenediamine end group precedes the passage of the α-CD onto the hydrophobic dodecamethylene chain.     

O,O′-dialkyl and alkylene dithiophosphate derivatives of silver(I). X-ray crystal structure of [Ag{S2POCH2CMe2CH2O} PPh3]2 · 2H2O

Silver(I) dialkyl/alkylene dithiophosphates of the types [Ag{S₂P(OR)₂}] and [Ag{S₂P(OGO)}] (where R = –Pr ⁿ ; G = –CMe₂CH₂CHMe–, –CH₂CMe₂CH₂–, –CMe₂CMe₂– or –CH₂CH₂CHMe–) have been prepared by treating an aqueous solution of AgNO₃ with ammonia salts of the respective dithiophosphoric acid. The derivatives form 1:1 adducts readily with 2,2-bipyridine or Ph₃P in CH₂Cl₂ solution. These novel complexes have been characterized by elemental analyses, molecular weight measurements and spectral (i.r., ¹H- and ³¹P-n.m.r.) studies. The crystal structure of [Ag{S₂POCH₂CMe₂CH₂O · PPh₃]₂ · 2H₂O exhibits an unsymmetrical attachment of the silver(I) to the ligand moiety.     

Catalytic electron drives host–guest recognition

Electron injection is demonstrated to trigger electrocatalytic chain reactions capable of releasing a solvent molecule and forming a redox active guest molecule. One-electron reduction of a hydroxy anthrone derivative (AQH–CH₂CN) results in the formation of an anthraquinone radical anion (AQ˙⁻) and acetonitrile (CH₃CN). The resulting fragment of AQ˙⁻ exhibits high stability under mild reducing conditions, and it has enough reducing power to reduce the reactant of AQH–CH₂CN. Hence, subsequent electron transfer from AQ˙⁻ to AQH–CH₂CN yields the secondary AQ˙⁻ and CH₃CN, while the initial AQ˙⁻ is subsequently oxidized to AQ. Overall, the reactants of AQH–CH₂CN are completely converted into AQ and CH₃CN in sustainable electrocatalytic chain reactions. These electrocatalytic chain reactions are mild and sustainable, successfully achieving catalytic electron-triggered charge-transfer (CT) complex formation. Reactant AQH–CH₂CN is non-planar, making it unsuitable for CT interaction with an electron donor host compound (U_HAnt₂) bearing parallel anthracene tweezers. However, conversion of AQH–CH₂CN to planar electron acceptor AQ by the electrocatalytic chain reactions turns on CT interaction, generating a host CT complex with U_HAnt₂ (AQ ⊂ U_HAnt₂). Therefore, sustainable electrocatalytic chain reactions can control CT interactions using only a catalytic amount of electrons, ultimately affording a one-electron switch associated with catalytic electron-triggered turn-on molecular recognition.

The reactants of AQH–CH₂CN are converted into AQ and CH₃CN in sustainable electrocatalytic chain reactions, successfully achieving catalytic electron-triggered charge-transfer (CT) complex formation.     

Kinetics of the R + HBr RH + Br (CH3CHBr, CHBr2 or CDBr2) equilibrium. Thermochemistry of the CH3CHBr and CHBr2 radicals

The kinetics of the reaction of the CH₃CHBr, CHBr₂ or CDBr₂ radicals, R, with HBr have been investigated in a temperature-controlled tubular reactor coupled to a photoionization mass spectrometer. The CH₃CHBr (or CHBr₂ or CDBr₂) radical was produced homogeneously in the reactor by a pulsed 248 nm exciplex laser photolysis of CH₃CHBr₂ (or CHBr₃ or CDBr₃). The decay of R was monitored as a function of HBr concentration under pseudo-first-order conditions to determine the rate constants as a function of temperature. The reactions were studied separately from 253 to 344 K (CH₃CHBr + HBr) and from 288 to 477 K (CHBr₂ + HBr) and in these temperature ranges the rate constants determined were fitted to an Arrhenius expression (error limits stated are 1σ + Student’s t values, units in cm³ molecule⁻¹ s⁻¹, no error limits for the third reaction): k(CH₃CHBr + HBr) = (1.7 ± 1.2) × 10⁻¹³ exp[+ (5.1 ± 1.9) kJ mol⁻¹/RT], k(CHBr₂ + HBr) = (2.5 ± 1.2) × 10⁻¹³ exp[−(4.04 ± 1.14) kJ mol⁻¹/RT] and k(CDBr₂ + HBr) = 1.6 × 10⁻¹³ exp(−2.1 kJ mol⁻¹/RT). The energy barriers of the reverse reactions were taken from the literature. The enthalpy of formation values of the CH₃CHBr and CHBr₂ radicals and an experimental entropy value at 298 K for the CH₃CHBr radical were obtained using a second-law method. The result for the entropy value for the CH₃CHBr radical is 305 ± 9 J K⁻¹ mol⁻¹. The results for the enthalpy of formation values at 298 K are (in kJ mol⁻¹): 133.4 ± 3.4 (CH₃CHBr) and 199.1 ± 2.7 (CHBr₂), and for α-C–H bond dissociation energies of analogous compounds are (in kJ mol⁻¹): 415.0 ± 2.7 (CH₃CH₂Br) and 412.6 ± 2.7 (CH₂Br₂), respectively.     

Sodium β-Diketonate Glyme Adducts as Precursors for Fluoride Phases: Synthesis,Characterization and Functional Validation

Very few sodium complexes are available as precursors for the syntheses of sodium-based nanostructured materials. Herein, the diglyme, triglyme, and tetraglyme (CH₃O(CH₂CH₂O)_nCH₃, n = 2–4) adducts of sodium hexafluoroacetylacetonate were synthesized in a single-step reaction and characterized by IR spectroscopy, ¹H, and ¹³C NMR. Single-crystal X-ray diffraction studies provide evidence of the formation of the ionic oligomeric structure [Na₄(hfa)₆]²⁻•2[Na(diglyme₂]⁺ when the diglyme is coordinated, while a mononuclear seven-coordinated complex Na(hfa)•tetraglyme is formed with the tetraglyme. Reaction with the monoglyme (CH₃OCH₂CH₂OCH₃) does not occur, and the unadducted polymeric structure [Na(hfa)]_n forms, while the triglyme gives rise to a liquid adduct, Na(hfa)•triglyme•H₂O. Thermal analysis data reveal great potentialities for their applications as precursors in metalorganic chemical vapor deposition (MOCVD) and sol-gel processes. As a proof-of-concept, the Na(hfa)•tetraglyme adduct was successfully applied to both the low-pressure MOCVD and the sol-gel/spin-coating synthesis of NaF films.     

Olefin isomerisation by group via metals

2-(MeR¹CCR²)-and 2-(CH₂CR¹CH₂CH₂)-pyridine (R¹,R² = H or Me) undergo 1,2-double-bond shifts and 2-(CH₂CHCH₂CH₂CH₂)-pyridine undergoes a 1,3-double-bond shift on displacement of norbornadiene from [M(CO)₄norb] (M = Cr, Mo or W) to give complexes of the type [M(CO)₄LL'] (LL' = 2-(allyl)or 2-(substituted allyl)-pyridine), which do not exhibit conformational isomerism involving the plane of the coordinated olefin.     

Crystal structure of methylbis(chloromethyl)phosphine oxide

In the crystal structure of (CH₂C1)₂P(O)CH₃ and the isomorphous crystal structures of (CH₂Br)₂P(O)CH₃ and (CH₂I)₂P(O)CH₃, the molecules of the methylbis(halomethyl)phosphine oxide have an identical trans, gauche conformation.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1526–1528, July, 1991.     

Reaction of secondary phosphine selenides with the system Se/MOH (M = Li, Na, K, Rb, Cs): A novel three-component synthesis of diorganodiselenophosphinates

Secondary phosphine selenides, R₂P(Se)H (R = PhCH₂CH₂, PhCH(Me)CH₂, 4-t-BuC₆H₄CH₂CH₂, NaphthylCH₂CH₂, Ph), react with the system Se/MOH (M = Li, Na, K, Rb, Cs) in the system THF/EtOH at ambient temperature unusually fast (20–30 s) to give cleanly and almost quantitatively (in 94–100% yield) earlier unknown diorganodiselenophosphinates of alkali metals.     

Novel structures of cyclometallated complexes of palladium(II) derived from terdentate ligands. Crystal and molecular structure of [Pd{C6H4C(H)=NCH2CH2CH2NMe2}(X)] (X=Cl, Br, I)

Treatment of N-(2-chlorobenzylidene)-N,N-dimethyl-1,3-propanediamine (1) and N-(2-bromo-3,4-(MeO)₂-benzylidene)-N,N-dimethyl-1,3-propanediamine (20) with tris(dibenzylideneacetone)dipalladium(0) in toluene gave the mononuclear cyclometallated complexes [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(Cl)] (2) and [Pd{3,4-(MeO)₂C₆H₂C(H)=NCH₂CH₂CH₂NMe₂}(Br)] (21), respectively, via oxidative addition reaction with the ligand as a C,N,N terdentate ligand. Reaction of 2 with sodium bromide or iodide in an acetone–water mixture gave the cyclometallated analogues of 2, [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(Br)] (3) and [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(I)] (4), by halogen exchange. The X-ray crystal structures of 2, 3 and 4 were determined and discussed. Treatment of 2, 3, 4 and 21 with tertiary monophosphines in acetone gave the mononuclear cyclometallated complexes [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(L)(X)] (6: L=PPh₃, X=Cl; 7: L=PPh₃, X=Br; 8: L=PPh₃, X=I; 9: L=PMePh₂, X=Cl; 10: L=PMe₂Ph, X=Cl) and [Pd{3,4-(MeO)₂C₆H₂C(H)=NCH₂CH₂CH₂NMe₂}(L)(Br)] (22: L=PPh₃; 23: L=PMePh₂; 24: L=PMe₂Ph). A fluxional behaviour due to an uncoordinated CH₂CH₂CH₂NMe₂ could be determined by variable temperature NMR spectroscopy. Treatment of 2, 3 and 4 with silver trifluoromethanesulfonate followed by reaction with triphenylphosphine gave the mononuclear complex [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(PPh₃)][F₃CSO₃] (11) where the Pd–NMe₂ bond was retained. Reaction of 2, 3 and 4 with ditertiary diphosphines in a cyclometallated complex–diphosphine 2:1 molar ratio gave the binuclear complexes [{Pd[C₆H₄C(H)=NCH₂CH₂CH₂NMe₂](X)}₂(μ-L–L)][L–L=PPh₂(CH₂)₄PPh₂(dppb) (13, X=Cl; 14, X=Br; 15, X=I; L–L=PPh₂(CH₂)₅PPh₂(dpppe): 16, X=Cl; 17, X=Br; 18, X=I) with palladium–NMe₂ bond cleavage. Treatment of 2, 3 and 4 with ditertiary diphosphines, in a cyclometallated complex–diphosphine 2:1, molar ratio and AgSO₃CF₃ gave the binuclear cyclometallated complexes [{Pd[C₆H₄C(H)=NCH₂CH₂CH₂NMe₂]}₂(μ-L–L)][F₃CSO₃]₂ (11: L–L=PPh₂(CH₂)₄PPh₂(dppb), X=Cl; 12: L–L=PPh₂(CH₂)₅PPh₂ (dpppe), X=Cl). Reaction of 2 with the ditertiary diphosphine cis-dppe in a cyclometallated complex–diphosphine 1:1 molar ratio followed by treatment with sodium perchlorate gave the mononuclear cyclometallated complex [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(cis-PPh₂CH=CHPPh₂–P,P)][ClO₄] (19).     

Silylating Agents Grafted onto Silica Derived from Leached Chrysotile

Silica from leached chrysotile fibers (SILO) was silanized with trialkoxyaminosilanes to yield inorganic–organic hybrids designated SILx (x=1–3). The greatest amounts of the immobilized agents were quantified as 2.14, 1.90, and 2.18 mmol g⁻¹ on SIL1, SIL2, and SIL3 for –(CH₂)₃NH₂,–(CH₂)₃NH(CH₂)₂NH₂, and –(CH₂)₃NH(CH₂)₂NH(CH₂)₂NH₂ groups attached to the inorganic support. The infrared spectra for all modified silicas showed the absence of the Si–OH deformation mode, originally found at 950 cm⁻¹, and the appearance of asymmetric and symmetric C–H stretching bands at 2950 and 2840 cm⁻¹. Other important bands associated with the organic moieties were assigned to ν_as(NH) at 3478 and ν_sym(NH) at 3418 cm⁻¹. The NMR spectrum of the solid precursor material suggested two different kinds of silicon atoms: silanol and siloxane groups, between −90 and 110 ppm; however, additional species of silicon that contain the organic moieties bonded to silicon at −58 and −66 ppm appeared after chemical modification. These modified silicas showed a high adsorption capacity for cobalt and copper cations in aqueous solution, in contrast to the original SILO matrix, confirming the unequivocal anchoring of silylating agents on the silica surface.     

Nuclear quadrupole resonances of α-(CH3)2 TeX2 (X=Cl, Br, I) and (CH3)2 TeI4

NQR spectra were observed for α-(CH₃)₂ TeX₂ (X=Cl, Br, I) and (CH₃)₂ TeI₄ at various temperatures. The two ⁸¹Br NQR lines were observed above 110 K in α-(CH₃)₂TeBr₂. The characteristic temperature dependence of the ¹²⁷I NQR line in α-(CH₃)₂ TeI. can be explained by the 3c—4e bond of the linear I---Te---I group. The positive temperatures dependence of the lowest ¹²⁷I NQR line in (CH₃)₂TeI₄ is discussed on the basis of the electron population calculated from Townes—Dailey treatment.     

Novel properties of molecular assemblies of isoprenoid surfactants

Unlike micelles of straight hydrocarbon chain-surfactants, isoprenoid surfactants, CH₃ [CH(CH₃)CH₂CH₂CH₂]₃ CH(CH₃)CH₂–R (R=CH₂N⁺ (CH₃)₃ Br^–, CH₂OPO₃H^– Na⁺, CH₂OSO ₃ ^– Na⁺, CO ₂ ^– Na⁺), gave large globular and cellular assemblies in water which could be observed directly by transmission electron microscopy; critical micelle concentration of 0.31.4×10^–3 M at 20°C, aggregation number of 215×10⁴, and diameter of 200–2000 Å. A basic structure of the assemblies was a thin layer with a thickness (about 30 Å) which was close to the molecular length of the surfactants. The assemblies were decomposed during gel column chromatography; viz., they were not as stable as the liposomes of lecithins. The morphology was discussed in conjunction with a steric effect of the isoprenoid chain.