溶胶—凝胶合成（Mg,Ca）O—SiO2：Eu^3＋,Bi^3＋发光体及其发光行为

以Ｍｇ（ＮＯ３）２，Ｃａ（ＮＯ３）２，Ｅｕ（ＮＯ３）３，Ｂｉ（ＮＯ３）３和Ｓｉ（ＯＣ２Ｈ５）４为反应物，采用溶胶－凝胶法，在比较低的温度，首次合成０．７０１ｍｏｌＭｇＯ－０．１７５ｍｏｌＣａＯ－１．２５ｍｏｌＳｉＯ２：０．０６ｍｏｌＥｕ＾３＋，０．００２ｍｏｌＢｉ＾３＋（加入Ｌｉ＾＋作为电荷补偿剂）发光体，得到了最佳合成条件，研究了由溶胶向凝胶转变和凝胶向发光晶体的转变过程，探讨了发光体在不同激光     

溶胶－凝胶法合成（Mg，Ca）O－SiO_2∶Eu~（3＋），Bi~（3＋）发

以Ｍｇ（ＮＯ３）２、Ｃａ（ＮＯ３）２、Ｅｕ（ＮＯ３）３、Ｂｉ（ＮＯ３）３、ＬｉＮＯ３和Ｓｉ（ＯＣ２Ｈ５）４为反应物，采用溶胶－凝胶法，在比较低的温度下，首次合成０．７０１ｍｏＩＭｇＯ－０．１７５ｍｏｌＣａＯ－１．２５ｍｏＩＳｉＯ２∶０．０６ｍｏｌＥｕ（３＋），０．００２ｍｏＩＢｉ（３＋）（加入Ｌｉ＋作为电荷补偿剂）发光体。得到了最佳合成条件。研究了由溶胶向凝胶转变和凝胶向发光晶体的转变过程。探讨了发光体在不同激发波长激发下的发光特性以及在激活剂、敏化剂不同掺杂量下的发光行为。讨论了在（Ｍｇ（ａ）Ｏ－ＳｉＯ２基质中Ｂｉ（３＋）对Ｅｕ（３＋）的能量传递和敏化作用。     

γ射线辐照超细铂催化剂的载体效应

用γ射线辐射法制备了铂溶胶和粒径为５ｎｍ的超细铂粉,采用机械混合法和溶胶－凝胶法制备了一系列不同载体的超细铂催化剂,不同载体对提高ＣＯ氧化活性的顺序为：ＭｇＯ〉γ－Ａｌ２Ｏ３≥ＺｒＯ２〉ＴｉＯ２〉ＳｉＯ２,其中,由溶胶－凝胶法制备的０．１％Ｐｔ／ＳｉＯ２和０．１％Ｐｔ／ＴｉＯ２的经表面积大,Ｐｔ分散度高,但活性最差,ＸＰＳ结果表明部分表面Ｐｔ＾０和ＴｉＯ２作用生成了ＰｔＯ和Ｔｉ２Ｏ３,并且Ｐｔ的分     

溶液－溶胶－凝胶（SSG）法制备高均匀性Bi系超导体原始粉末的SSG转变判据

溶液－溶胶－凝胶（ＳＳＧ）法制备高均匀性Ｂｉ系超导体原始粉末的ＳＳＧ转变判据毛传斌，周廉，杜泽华，吴晓祖（西北有色金属研究院超导材料研究所，宝鸡７２１０１４）１引言溶胶－凝胶法是指金属有机或无机化合物经过溶液、溶胶、凝胶而固化，再经热处理而成氧化物或...     

SiO2-AEO凝胶体系的织构特性

采用溶胶－凝胶法,以正硅酸乙酯（ＴＥＯＳ）为前驱体,用脂肪醇聚氧乙烯醚（ＡＥＯ）为改性剂制备结构可控的多孔ＳｉＯ２干凝胶。结果表明：通过调节添加量和聚合度以及溶胶老化时间可以对ＳｉＯ２干凝胶织构性质进行有效的调控;采用不同的环境气候对ＳｉＯ２－ＡＥＯ干凝胶进行热处理,则ＡＥＯ表现出不同的热稳定性;经热处理后,ＡＥＯ等有机残留物被脱除的同时,ＳｉＯ２－ＡＥＯ干凝胶柔性骨架得到加强,孔分布更趋集中,干     

溶胶—凝胶法制备Na5YSi4O12及其离子导电性质

用溶胶－凝胶方法制备了钠快离子导体Ｎａ５ＹＳｉ４Ｏ１２（简称ＮＹＳ）的纯相，应用交流阻抗谱技术测定了样品的离子导电活化能，用扫描电子显微镜对用不同制备的样品烧结体表面进行了观察，与传统固相反应法制备的ＮＹＳ离子导体相比，用溶胶－凝胶方法制备的ＮＹＳ烧结体具有较好的界面效应。     

溶胶－凝胶法制备Na_5YSi_4O_（12）及其离子导电性质

用溶胶－凝胶方法制备了钠快离子导体Ｎａ_５ＹＳｉ_４Ｏ_（１２）（简称ＮＹＳ）的纯相，应用交流阻抗谱技术测定了样品的离子电导和离子导电活化能，用扫描电子显微镜对用不同方法制备的样品烧结体表面进行了观察。与传统固相反应法制备的ＮＹＳ离子导体相比，用溶胶－凝胶方法制备的ＮＹＳ烧结体具有较好的界面效应。     

Co基超细粒子催化剂用于合成重质烃Ru助剂的作用

用溶胶凝胶法制备了ＳｉＯ２气凝胶超细粉体及ＺｒＯ２ＳｉＯ２超细复合载体，用浸渍法制备了Ｃｏ／ＺｒＯ２ＳｉＯ２超细粒子催化剂并用干混法制备了ＣｏＲｕ／ＺｒＯ２ＳｉＯ２催化剂．考察了Ｒｕ的添加对Ｃｏ／ＺｒＯ２ＳｉＯ２催化剂的织构、结构、还原、氢脱附及其ＦＴ反应性能的影响．结果表明，Ｒｕ的添加使Ｃｏ２＋更难还原，催化剂活性略有下降，ＣＨ４选择性降低，Ｃ５＋选择性及收率升高；Ｃｏ１％Ｒｕ／ＺｒＯ２ＳｉＯ２催化剂上的烃类产物不遵从ＳｃｈｕｌｚＦｌｏｒｙ分布，在Ｃ９和Ｃ１５有两个最高峰．     

NiO／SiO2—Al2O3催化剂上CO2氧化的原位DSC研究

通过对溶胶凝胶－超临界干燥法制备的ＮｉＯ－ＳｉＯ２－Ａｌ２Ｏ３催化剂上ＣＯ氧化反应的原位ＤＳＣ测试，实现了对催化剂的活性以及催化剂制备参数影响反应性能的规律考察，同时与实际微反结果进行了比较。     

调变钴系超细粒子催化剂合成重质烃

制备了ＳｉＯ２气凝胶超细粉、ＺｒＯ－ＳｉＯ２超细复合氧化物载体以及Ｃｏ／ＺｒＯ２－ＳｉＯ超细粒子催化剂，考察了还原温度对Ｃｏ／ＺｒＯ２－ＳｉＯ催化剂Ｆ－Ｔ反应性能的影响。结果表明，４００下，Ｈ２还原的Ｃｏ／ＺｒＯ２－ＳｉＯ２催化剂有最佳Ｆ－Ｔ反应活性和Ｃ５选择性。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.