磺酸型聚氨酯离聚物的离子导电性能

本文以多种聚醚为软段，二异氰酸酯（ＭＤＩ和ＴＤＩ）为硬段，合成了多嵌段聚醚聚氨酯，以此聚氨酯为基材，与ＮａＨ及１，３－丙碳酸内酯反应，进一步合成了一系列不同离子化程度的阴离子型碳化聚氨酯离聚物，用交流阻抗谱仪测定了样品的阻抗谱，由此计算出样品的离子电导率。研究结果表明其他条件相同时，以聚乙二醇（ＰＥＧ）为软段的样品具有较高的离子电导率；以聚环氧丙烷（ＰＰＯ）为软段的样品次之，以聚四氢呋喃（ＰＴＭＯ）为软段的样品最低，对于离子化程度不同的聚氨酯离聚物以金属离子和烷氧单元之比为０．０５时导电性能最好。阳离子为Ｌｉ＋和Ｎａ＋的样品具有相近的离子电导率。     

羧酸型聚乙二醇聚氨酯离聚物及其导电性能

以聚环氧乙烷（ＰＥＯ）为软段，与４，４’－二苯甲烷二异氰酸酯（ＭＤＩ）预聚，以２，２’－二羟甲基丙酸（ＤＭＰＡ）扩链合成了含羧酸基团的聚氨酯，并经中和形成了含不同金属离子的离聚物．测定了样品的热分析数据和力学性能，利用交流阻抗分析仪测定了样品的阻抗谱，由此计算出样品的离子电导率．这类样品由于阴离子（－ＣＯＯ－）固定在聚合物分子链上，因此只有单一阳离子迁移．结果表明，羧酸型聚氨酯离聚物既有较高的单一离子电导率又具有优良的力学性能．讨论了不同软段分子量、硬段含量和金属抗衡离子对离子电导性能的影响     

嵌段聚氨酯阴离子离聚物的小角X射线散射研究

用小角Ｘ射线散射研究了嵌段聚氨酯阴离子离聚物中不同离子化程度对离子聚集体形态结构的影响．结果表明：离子含量少时，主要以非聚集离子或多重离子对的形式存在；离子含量多时，主要以离子簇的形式存在．聚氨酯离子化后，有利于软、硬段的微相分离．     

低聚醚磺酸锂／梳形聚醚复合物的单离子导电性

低聚醚磺酸锂／梳形聚醚复合物的单离子导电性郑云贵，万国祥（中国科学院成都有机化学研究所成都６１００４１）关键词低聚醚磺酸锂，单离子导体，阳离子迁移数聚合物阳离子导体一般采用单体盐与能促进离子迁移的单体通过共聚或将其均聚物共混的方式制备’‘－‘’．由于...     

新型单离子聚醚/聚氨酯固体电解质制备及其离子导电性

磺化聚醚;离子电导率;聚合物;新型单离子聚醚/聚氨酯固体电解质制备及其离子导电性     

硬段聚醚掺杂聚氨酯的合成及其离子导电性能

低分子量聚醚;聚氨酯固体电解质;离子电导率;硬段聚醚掺杂聚氨酯的合成及其离子导电性能     

磺酸型阴离子聚氨酯离聚物的研究(Ⅰ)——不同离子化程度对性能的影响

合成了不同离子化程度的磺酸型阴离子聚氨酯离聚物,并通过红外光谱、示差扫描量热、动态力学、应力-应变等方法研究了它们的性能,结果表明:离子化程度不同对聚氨酯离聚物的软硬段相容性有较大的影响,引入少量离子,使软硬段相容性提高,引入大量离子时,则又使软硬段相分离程度提高,随着离子化程度的提高,材料的抗张强度、水溶性逐步提高,为控制聚氨酯材料的亲水性及制备水溶性聚氨酯提供了一种新途径。     

聚醚聚氨酯/低聚醚硫酸盐电解质的导电性能

聚合物固体电解质;聚二氧戊环;聚醚聚氨酯/低聚醚硫酸盐电解质的导电性能;离子电导率;     

多嵌段聚醚氨酯脲为基质的新型高分子固态离子导体

本文合成了一系列聚乙二醇型多嵌段聚醚氨酯脲，而且用这类聚醚氨酯甩与高氯酸锂制得了一种新型的高分子固态离子导体复合物。在室温和50℃之间，其电导率比聚环氧乙烷为基质的固体电解质的高一到二个数量级，它还具有优良的综合性能。因此，对于室温薄膜蓄电池来说，这种新型的固体电解质是一类良好的候选材料。     

PBMA-b-PSt磺化嵌段离聚体在DMF溶液中的聚集行为

采用激基缔合物荧光光谱法研究了轻度磺化聚甲基丙烯酸丁酯－b－聚苯乙烯（PBMA-b－PSt）嵌段离聚体在极性溶剂N，N－二甲基甲酰胺（DMF）溶液中的聚集行为；发现嵌段离聚体的磺化度和浓度强烈影响溶液中聚合物链的聚集态结构，不同的磺化度样品具有不同的临界聚集浓度；随磺化度增加，聚合物链缠绕密集，形成具有多苯环的聚集体，而且当磺化度为摩尔分数x＝3．59％时，荧光发射光谱最大发射峰波长出现最大红移，临界聚集浓度最低，说明最容易形成多苯环聚集体，该磺化点可以认为是磺化聚甲基丙烯酸丁酯－b－聚苯乙烯体现离聚体行为和聚电解质行为的临界磺化度。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.