Ternary systems of nonionic surfactant Brij 35, water and various simple alcohols: Structural investigations by small-angle X-ray scattering and dynamic light scattering

Structural properties of ternary systems composed of nonionic surfactant dodecyl-poly(ethylene oxide-23) ether (C12E23, commercial name: Brij 35), water and various alcohols from ethanol to 1-decanol have been investigated using small-angle X-ray scattering (SAXS) and dynamic light scattering (DLS) techniques. All measurements were performed at the temperature 25 degrees C. SAXS experimental data were put on absolute scale using water as a secondary standard. The data of water-rich mixtures at low to moderate surfactant concentrations were evaluated using the generalized indirect Fourier transformation method (GIFT), which is based on the simultaneous determination of the intra- and inter-particle scattering contributions. In this way, the size and the shape of interacting scattering particles in real space could be deduced. The systems with a relatively low surfactant concentration (5 mass%) were studied most extensively. In these cases, the water-rich regions of the phase diagrams could be investigated into more detail, since in the alcohol-rich regions problems with the GIFT evaluation of the SAXS data were encountered. The presented results demonstrate the level of structural details that can be obtained on the basis of scattering methods and point out the specific stages of data evaluation and interpretation where one must be extremely precautious. As such they reveal the inner structuration of the complex ternary systems of our present interest. In parallel, they also indicate that the longer chain alcohols actually behave as real oil phases in the studied systems, as one might expect, and also confirm the well-known properties of different short to medium chain alcohols that act as co-solvents and/or co-surfactants in microemulsion systems depending on their chain length.     

Phase transitions in poly(heptane-1,7-diyl biphenyl-4,4′-dicarboxylate). SAXS,WAXS and DSC study

The main-chain thermotropic liquid-crystalline poly(heptane-1,7-diyl biphenyl-4,4′-dicarboxylate) (P7MB) was investigated by time-resolved small-angle X-ray scattering (SAXS), wide-angle X-ray scattering (WAXS), and differential scanning calorimerty (DSC). Nonisothermal crystallisation with different rates of cooling and heating was used. On cooling, two phase transitions are observed, isotropic melt - smectic (I-Sm) and Sm- three-dimensional crystalline structure (Sm-Cr), whereas on heating only one transition is observed, Cr-I transition. The transition enthalpies were calculated. Temperature dependences of d-spacings of all crystalline peaks and of the peak observed at high values of scattering vector in the SAXS region were derived. The temperature dependence of the degree of crystallinity was established, based on the integrated intensities of the crystalline peaks and amorphous halo in WAXS.     

Structural analysis of polyelectrolyte film absorbing metal ion by SAXS utilizing with X-ray anomalous dispersion effect

A distribution of Cu ions in polyelectrolyte film (Nafion) is directly observed with a small-angle X-ray scattering (SAXS) method utilizing an X-ray anomalous dispersion effect. A partial structure factor of the Cu ions, GAA(q), can be derived from the SAXS profiles obtained by scanning the incident X-ray energy around the Cu K absorption edge. GAA(q) has two peaks, indicating that the Cu ions hierarchically distribute in Nafion film. In addition, a standard SAXS also shows that Nafion film has a hierarchical structure. These results mean that the Cu ions locate in the domain where the hydrophilic bases aggregate.     

Enantioselective Discrimination of Alcohols by Hydrogen Bonding: A SERS Study

Efficient and generic enantioselective discrimination of various chiral alcohols is achieved by using surface‐enhanced Raman scattering (SERS) spectroscopy through charge–transfer (CT) contributions. The relative intensities of the peaks in the SERS spectra of a chiral selector are strongly dependent on the chirality of its surroundings. This highly distinct spectral discrepancy may be due to the tendency of chiral isomers to form intermolecular hydrogen‐bonding complexes with the chiral selector in different molecular orientations, resulting in different CT states and SERS intensities of the adsorbates in the system. This study opens a new avenue leading to the development of novel enantiosensing strategies. A particular advantage of this approach is that it is label‐free and does not employ any chiral reagents, including chiral light.     

Gelation of xyloglucan ID water/alcohol systems

Xyloglucan has a cellulose backbone with branched (16)--xylose or (12)--galactoxylose as a side chain. Its aqueous solution yields a gel by adding alcohol. The gel structure of xyloglucan ID various kinds of mono- or polyhydric alcohol/water systems was studied by small-angle X-ray scattering (SAXS). The gelation behavior ID strongly dependent on the type of alcohol. The SAXS from gel with monohydric alcohols indicated that the xyloglucan chains caused random aggregation, as expressed with a Debye–Bueche type scattering function. The type of alcohol added was correlated with the size of the inhomogeneity, as evaluated by SAXS results. The gelation with polyhydric alcohols resulted ID less association, which occurred as side-by-side association with a few xyloglucan chains, rather than as random aggregation.     

A study of carbon black Corax N330 with small-angle scattering of neutrons and X-rays

Carbon black Corax N330 (hereinafter called CB) is used as a filler in elastomers. The properties of the surface are important for the binding of the elastomer to the carbon black particles. Porod's law requires the intensity to satisfy I(q) approximately q(-alpha) with alpha = 4 for large q. Rieker et al. observed alpha = 3.7 +/- 0.1 for small-angle X-ray scattering (SAXS) data and concluded that the particle surface is fractally rough. Ruland critized this and suggested that the observed deviation is due to fluctuations of the spacing of the graphitic layer planes ("graphenes") which contribute a component I(q)fluc = 1Cflucq(-2) to the intensity component satisfying Porod's law. We studied CB by nitrogen adsorption, high-resolution transmission electron microscopy, synchroton SAXS, and small-angle neutron scattering (SANS). Our SAXS experiments with samples of high transmission (Tr = 0.96) confirmed the form of the scattering curves published by Rieker et al., but the correction for I(q)fluc restored Porod's law. SANS experiments were performed with a sample of low transmission in order to analyze the high q-range for scattering from voids and isolated graphenes. We found I(q) approximately q(-beta) with beta approximately 2 at q > 2.5 nm(-1) and will show that this intensity component requires graphenes consisting of about 12 benzene rings. The contrast matching technique revealed the presence of inaccessible voids. The SANS data for a sample with Tr = 0.363 satisfy Porods law, in contrast to the SAXS data for the high transmission samples. The latter discrepancy is likely due to the lower resolution of the SANS measurements because of wavelength smearing and multiple scattering. A SANS sample with Tr = 0.97 shows a minor deviation from Porod's law only (alpha = 3.9). The original SANS data and the SAXS data corrected for the fluctuation component indicate that the CB surface is essentially smooth.     

Structures of Fibrous Supramolecular Assemblies Constructed by Amino Acid Surfactants: Investigation by AFM, SANS, and SAXS

Aqueous gel-like solutions of N-acyl-L-aspartic acids (C(n)Asp, n=14, 16, 18) and N-dodecanoyl-beta-alanine (C(12)Ala) were prepared at pH 5-6 at room temperature. Structures of supramolecular assemblies in the solutions were investigated by atomic force microscopy (AFM), small-angle neutron scattering (SANS), and small-angle X-ray scattering (SAXS). The cross-sectional radii, 22-30 ?, of helical, fibrous assemblies were obtained from analysis of SANS for 1% gel-like C(n)Asp solutions. Three Bragg spacings were observed in a SANS spectrum for a 6% C(16)Asp solution. C(n)Asp molecules are associated into the unit chain of a helical bilayer strand with a diameter of 50-60 ?. Unit chains where linear bilayers twist form a double strand with helical sense of approximately 650-? pitch. It was confirmed from AFM images that cylindrical fibers in a gel-like C(12)Ala solution had a circular cross-section. The SAXS spectrum showed characteristic Bragg spacings. Cylindrical C(12)Ala fibers consist of multilamellar layers of period approximately 34-?. The fibers are laterally organized with period 365-380 ?. Copyright 2000 Academic Press.     

Applications of small-angle X-ray scattering/small-angle neutron scattering and cryogenic transmission electron microscopy to understand self-assembly of surfactants

The self-assembling structures and dynamics of surfactants determine most of their macroscopic physicochemical properties and performances. Herein, we review recent work on the self-assembly of surfactants by small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS) in conjunction with cryogenic transmission electron microscopy (Cryo-TEM) from the perspective of researchers having only limited theoretical knowledge of these techniques but expert in surfactants. Emphasis is placed on the structural analysis of typical surfactant aggregates over a wide range of size scales from nanometers up to microns, including spherical and rod-like micelles, wormlike micelles, vesicles, liquid crystals and coacervates, by combining different numerical approaches to the treatment of small-angle scattering data with the direct Cryo-TEM imaging method. Furthermore, the complementarity between SAXS and SANS, and between the scattering techniques and Cryo-TEM, that is, specific contributions of these techniques, is also covered.     

Structural characteristics of silica sonogels prepared with additions of isopropyl alcohol

Wet silica gels with approximately 1.4 x 10(-3) mol SiO2/cm3 and approximately 92 vol % liquid phase were obtained from sonohydrolysis of tetraethoxysilane (TEOS) with different additions of isopropyl alcohol (IPA). The IPA/TEOS molar ratio R was changed from 0 to 4. Aerogels were obtained by supercritical CO2 extraction. The samples were analyzed by small-angle X-ray scattering (SAXS) and nitrogen adsorption. The wet gels exhibit mass fractal structure with fractal dimension increasing from D approximately 2.10 to D approximately 2.22, characteristic length xi decreasing from approximately 9.5 to approximately 6.9 nm, as R increases from 0 to 4, and an estimated characteristic length for the primary silica particles lower than approximately 0.3 nm. The supercritical process apparently eliminates a fraction of the porosity, increasing the mass fractal dimension and shortening the fractality domain in the mesopore region. The fundamental role of isopropyl alcohol on the structure of the resulting aerogels is to decrease the porosity and the pore mean size as R changes from pure TEOS to R = 4. A secondary structure appearing in the micropore region of the aerogels can be described as a mass/surface fractal structure, with correlated mass fractal dimension Dm approximately 2.7 and surface fractal dimension Ds approximately 2.3, as inferred from SAXS and nitrogen adsorption data.     

Aggregation behavior of pyridinium based ionic liquids in water--surface tension, 1H NMR chemical shifts, SANS and SAXS measurements

The aggregation behavior of short alkyl chain ionic liquids (ILs), namely 1-butyl, or 1-hexyl or 1-octylpyridinium and 1-octyl-2-, or -3-, or -4-methylpyridinium chlorides, in water has been assessed using surface tension, electrical conductance, (1)H NMR, small angle neutron scattering (SANS) and small angle X-ray scattering (SAXS) measurements. Critical aggregation concentrations (CACs), adsorption (at air/water interface) and thermodynamic parameters of aggregation have been reported. The values of CAC and area per adsorbed molecule decrease with the number of carbon atoms in the alkyl chain. The aggregation process is driven by both favorable enthalpy and entropy contributions. An attempt was made to examine the morphological features of the aggregates in water using SANS and SAXS methods. SANS and SAXS curves displayed diffuse structural peaks that could not be model fitted, and therefore, we calculated the mean aggregation numbers from the Q(max) assuming that IL molecules typically order into cubic type clusters.     

A pyrrole-containing surfactant as a tecton for nanocomposite SiO2 films

A surfactant featuring a polymerizable pyrrole head group (dodecyl-dimethyl-(2-pyrrol-1-yl-ethyl)-ammonium bromide, DDPABr) was synthesized. The thermotropic behavior of the surfactant was investigated by differential scanning calorimetry (DSC) and X-ray scattering techniques, with small-angle X-ray scattering (SAXS) analysis revealing a highly ordered lamellar bilayer structure. After full characterization, DDPABr was used in the preparation of mesostructured SiO2 nanocomposite thin films via evaporation-induced self-assembly (EISA). Resulting thin SiO2-DDPABr films were studied by 1D and 2D small-angle X-ray scattering (SAXS) techniques, indicating a lamellar nanocomposite structure. Suitable theoretical SAXS models were applied to fit the experimental 1D SAXS data. The surfactant could be chemically polymerized within the lamellar domains.     

Thermoplastic elastomers: Structural and morphological aspects of ether–esteramide copolymers

Polyesteramide 6NT6–polytetramethylene ether glycol (PTMEG) copolymers, precipitated from dilute solution, have been studied by small-angle x-ray scattering (SAXS) and wide-angle x-ray scattering (WAXS) with variation of the PTMEG content. A comparison of the structural characteristics of these materials has been made with those of the 6NT6 homopolymer. Chain folding is assumed as the crystallization mechanism for the low-PTMEG-content copolymers, with possible inclusion of polyether segments within the 6NT6 crystal lattice. WAXS data support the view of a weakening of the 6NT6 crystalline packing in the equatorial planes as the reason for broadening of the diffraction peaks, for changes in their relative intensities, and for the increase in the equatorial interplanar distances in the high-PTMEG-content samples. The annealing behavior has also been investigated.     

Small-angle scattering studies of nafion membranes

The physical structure of Nafion membranes has been investigated by small-angle neutron scattering (SANS) and small-angle x-ray scattering (SAXS). Samples in the acid form may exhibit two scattering peaks. The first, observed by SANS at an angle corresponding to a Bragg spacing of 180 Å, is shown to arise from structures in crystalline regions. A second peak at larger scattering angles is shown to arise from ion-containing regions which may be swollen with water. Salt-form samples made by soaking the acid form in an aqueous salt solution can also exhibit the same two scattering signals. But in amorphous salt-form samples produced by quenching from the melt the first peak is absent. This permits a more accurate study of the second peak by SAXS, which shows that the second scattering component is present as a maximum over a wide range of water contents but is absent in a sample dried at 200°C. The position of the peak shifts to lower scattering angles (or larger spacings) at higher water contents. Possible structural models that might give rise to the maximum are discussed. A calculation of the SAX invariant is made and results are consistent with a phase separation of a large fraction of the water.     

Nanostructure changes with Krafft transitions of polyelectrolyte-surfactant complexes in aqueous NaCl solutions

Nanostructure changes with the Krafft transition of complexes of poly(acrylicacid) with octadecyltrimethylammonium (PAA-OTA) in the aqueous solutions at various NaCl concentrations (Cs) from 20 to 400 mM, were studied making temperature-scanning small-angle X-ray scattering (SAXS) experiments and differential scanning calorimetric (DSC) measurements. For the PAA-OTA complex in the solution at a higher temperature than 25 degrees C, four SAXS peaks with a spacing ratio of 1:31/2:41/2:71/2, indicating the 2D hexagonal structure, were observed at Cs below 100 mM and two SAXS peaks with a spacing ratio of 1:2, indicating the lamella structure, were observed at Cs above 200 mM. For the complex in the solution at a lower temperature than 22 degrees C, a broad SAXS peak was observed at the scattering vector q = 1.2 nm-1 when the Cs was less than 200 mM but not when Cs was 400 mM. Two peaks with a spacing ratio 1:2, indicating the lamella structure, were also observed for the complex in the solution at 8 degrees C. The DSC data demonstrated that the nanostructure changes were accompanied with the endothermic enthalpy change. On the basis of the experimental results, the salt concentration dependent nanostructures are discussed.     

X-射线小角光散射(SAXS)研究全氟磺酸树脂中空纤维膜中的离子簇结构

 本文用SAXS(Small Angle X-ray Scattering)方法对全氟磺酸树脂中空纤维膜中的离子簇结构进行了研究.在散射角2θ=2°左右,出现由离子簇产生的散射峰;并就离子交换容量、不同阳离子形式、含水量及不同拉伸等对离子簇散射峰位的影响进行了研究讨论.并计算了有关离子簇半径和每个离子簇中的离子数目.     

Effects of ionic strength on SAXS data for proteins revealed by molecular dynamics simulations

The combination of small-angle X-ray solution scattering (SAXS) experiments and molecular dynamics (MD) simulations is now becoming a powerful tool to study protein conformations in solution at an atomic resolution. In this study, we investigated effects of ionic strength on SAXS data theoretically by using MD simulations of hen egg white lysozyme at various NaCl concentrations from 0 to 1 M. The calculated SAXS excess intensities showed a significant dependence on ion concentration, which originates from the different solvent density distributions in the presence and absence of ions. The addition of ions induced a slow convergence of the SAXS data, and a ～20 ns simulation is required to obtain convergence of the SAXS data with the presence of ions whereas only a 0.2 ns simulation is sufficient in the absence of ions. To circumvent the problem of the slow convergence in the presence of ions, we developed a novel method that reproduces the SAXS excess intensities with the presence of ions from short MD trajectories in pure water. By applying this method to SAXS data for the open and closed forms of transferrin at 1 M ion concentration, the correct form could be identified by simply using short MD simulations of the protein in pure water for 0.2 ns.     

Negative thermal expansion of water in hydrophobic nanospaces

The density and intermolecular structure of water in carbon micropores (w = 1.36 nm) are investigated by small-angle X-ray scattering (SAXS) and X-ray diffraction (XRD) measurements between 20 K and 298 K. The SAXS results suggest that the density of the water in the micropores increased with increasing temperature over a wide temperature range (20-277 K). The density changed by 10%, which is comparable to the density change of 7% between bulk ice (I(c)) at 20 K and water at 277 K. The results of XRD at low temperatures (less than 200 K) show that the water forms the cubic ice (I(c)) structure, although its peak shape and radial distribution functions changed continuously to those of a liquid-like structure with increasing temperature. The SAXS and XRD results both showed that the water in the hydrophobic nanospaces had no phase transition point. The continuous structural change from ice I(c) to liquid with increasing temperature suggests that water shows negative thermal expansion over a wide temperature range in hydrophobic nanospaces. The combination of XRD and SAXS measurements makes it possible to describe confined systems in nanospaces with intermolecular structure and density of adsorbed molecular assemblies.     

Silicalite-1 growth from clear solution: Effect of alcohol identity and content on growth kinetics

In situ small-angle X-ray scattering (SAXS) is used to investigate the influence of alcohol identity and content on silicalite-1 growth from clear solutions at 368 K. Several tetraalkyl orthosilicates (Si(OR)4, R = Me, Pr, and Bu) are used to synthesize silicalite-1 from clear solution mixtures comparable to those previously investigated (i.e. 1:0.36:20 TEOS:TPAOH:H2O (TEOS = tetraethyl orthosilicate; TPAOH = tetrapropylammonium hydroxide), 368 K). All TPAOH-organosiloxane mixtures studied form silica nanoparticles after aging at room temperature for 24 h. Full-profile fitting analysis of the SAXS data indicates the particles are ellipsoidal and is inconsistent with the presence of "nanoslabs" or "nanoblocks". Synthesis using TEOS as the silica source have an induction period of approximately 7.5 h and a growth rate of 1.90 +/- 0.10 nm/h at 368 K. Changing the silica source to tetramethyl orthosilicate (TMOS) does not change the induction period; however the particle growth rate is decreased to 1.65 +/- 0.09 nm/h at 368 K. Variable-temperature SAXS measurements for syntheses with TEOS and TMOS show the activation energy for silicalite-1 growth is 60.0 +/- 2.9 and 73.9 +/- 2.8 kJ/mol, respectively, indicating the alcohol identity does influence the growth rate. By mixing tetrapropyl orthosilicate (TPOS) with TEOS (1.6:1.0 molar ratio) as the silica source, the precursor solution shows a shorter induction period (6.0 h) and a faster particle growth rate (2.16 +/- 0.06 nm/h). The alcohol identity effect is more pronounced when other organocations (e.g. alkyltripropylammonium cations) are used to make silicalite-1 at 368 K. Removing ethanol from the precursor solution decreases the induction period to approximately 4.5 h and increases the particle growth rate to 2.99 +/- 0.13 nm/h. Mixtures with 2 equiv of ethanol have an induction period and particle growth rate of 6.0 h and 2.04 +/- 0.03 nm/h, respectively. The results demonstrate the alcohol identity and content influence silicalite-1 growth kinetics. One possible explanation is varying the alcohol identity and content changes the strength of the hydrophobic hydration of the structure-directing agent and the water-alcohol interaction, resulting in less efficient interchange between clathrated water molecules and solvated silicate species.     

SAXS and SANS studies of polymer colloids

The analysis of latex particles by small-angle scattering (small-angle X-ray scattering, SAXS; small-angle neutron scattering, SANS) is reviewed. Small-angle scattering techniques give information on the radial structure of the particles as well as on their spatial correlation. Recent progress in instrumentation allows to extend SANS and SAXS to the q-range of light scattering. Moreover, contrast variation employed in SANS and SAXS studies may lead to an unambiguous determination of the radial scattering length density of the particles in situ, i.e. in suspension. Hence, these techniques are highly valuable for a comprehensive analysis of polymer colloids as shown by the examples discussed herein.     

Formation and structure of self-assembled silica nanoparticles in basic solutions of organic and inorganic cations

The phase behavior of silica solutions containing organic and inorganic cations was studied at room temperature using conductivity, pH, and small-angle scattering experiments. A critical aggregation concentration (cac) was observed at approximately 1:1 ratio of SiO(2)/OH(-) for all cation solutions from conductivity and pH studies. From this cac, a phase diagram of the system was developed with three distinct phase regions in pseudoequilibrium: a monomer/oligomer region (I), a monomer/oligomer/nanoparticle region (II), and a gel region (III). Small-angle X-ray and neutron scattering (SAXS and SANS) on solutions of region II formed with tetrapropylammonium hydroxide (TPAOH) revealed that the nanoparticles have a core-shell structure. Structure analysis of the SAXS and SANS data was best fit by a core-shell oblate ellipsoid model. A polydisperse set of core-shell spheres also fit the data well although with lower agreement factors. Similar nanoparticle morphologies were found in solutions of TMAOH, CsOH, and NaOH.