EPR spectra of γ-irradiated dl-α-alanine supported on molecular sieves

The aim of the work was to collect information concerning boundary effects which are suspected in α-alanine dosimeters consisted of powdered microcrystalline α-alanine and binders. In our experiments the conventional binders were replaced by molecular sieves (MS). MS are inorganic porous materials (host structures) with well organized and uniform intra-crystalline pore systems of nano-scale size. The guest molecules can be either physically adsorbed on very large inner MS surface, or chemically bound to the active sites. They can be also encapsulated inside the intracrystalline cavities. The EPR spectra of gamma irradiated dl-α-alanine supported on NaY, CeY, SOD, mordenite, ZSM-5 and ALPO₄-5 were very similar to that one observed for irradiated microcrystalline dl-α-alanine. In the case of alanine supported on HY an initial EPR spectrum was different and only after some weeks it made resemble to the well known quintet observed in microcrystalline samples. In sodalites synthesized in the presence of dl-α-alanine EPR signal appeared in non-irradiated sample was very low and structureless. The irradiated sample showed a distinct spectrum which was quite different from that one observed for crystalline dl-α-alanine.     

Heterogeneous interaction between zwitterions of some l-α-amino acids and ethanol molecule in water at 298.15 K

Dissolution enthalpies of l-α-aminobutyric acid, l-α-isoleucine, l-α-serine, l-α-threonine and l-α-cysteine in water and aqueous ethanol solutions have been measured by calorimetry at a temperature of 298.15 K. The obtained results were used to calculate the enthalpic heterogeneous pair interaction coefficients between zwitterions of amino acids and a molecule of ethanol in water. These values were interpreted in the terms of the hydrophobic or hydrophilic effects of the side chains of amino acids on their interactions with a polar molecule of ethanol in water.     

Selection of synthetic receptors capable of sensing the difference in binding of d-Ala-d-Ala or d-Ala-d-Lac ligands by screening of a combinatorial CTV-based library

Screening of a combinatorial CTV-based artificial, synthetic receptor library 1 {1-13, 1-13, 1-13} for binding of a variety d-Ala-d-Ala and d-Ala-d-Lac containing ligands (6-11) was carried out in phosphate buffer (0.1 N, pH=7.0). After screening and Edman sequencing, synthetic receptors were found containing amino acid sequences, which are either characteristic for binding dye labeled d-Ala-d-Ala or d-Ala-d-Lac containing ligands. For example, receptors capable of binding d-Ala-d-Ala containing ligands 6, 7, 9 and 11 contained—almost in all cases—at least one basic amino acid residue—predominantly Lys—in their arms. This was really a striking difference with the arms of the receptors capable of binding d-Ala-d-Lac containing ligands 8 and 10, which usually contained a significant number of polar amino acids (Gln and Ser), especially in ligand 8, but hardly any basic amino acids. Use of different (fluorescent) dye labels showed that the label has a profound, albeit not decisive, influence on the binding by the receptor. A hit from the screening of the CTV-library with FITC-peptidoglycan (6) was selected for resynthesis and validation.     

Benzamidinium d-glucuronate: Spectroscopic and structural elucidation

Benzamidinium d-glucuronate (1) crystallizes in the orthorhombic space group P2₁2₁2₁ and exhibits a 3 D network with molecules linked by moderate intermolecular hydrogen bonds (HNH…O_(solvent) 2.993 Å, HNH…OCO 2.894 Å, HNH…O_(cycle) 2.844 Å, OH…NH₂ 2.931 Å, OH…O_(solvent) 2.894, 2.924 and 2.715 Å (stronger)) with participation of cations, anions and solvent molecules. The IR-band assignment of carbohydrate moieties is elucidated by a comparison between the types and bond lengths of intermolecular interactions with participation of OH groups in d-glucuronate and linear polarized IR-(IR-LD) spectroscopic data. Experimental results are supported by theoretical ab initio calculations of benzamidinium cation and d-glucuronate anion.     

Improved synthesis of 6-amino-6-deoxy-d-galactono-1,6-lactam and d-mannono-1,6-lactam from corresponding unprotected d-hexono-1,4-lactones

Regioselective bromination of unprotected d-galactono-1,4-lactone and d-mannono-1,4-lactone with PPh₃/CBr₄ led to 6-bromo-6-deoxy derivatives. These intermediates were treated with LiN₃ and hydrogenated to give 6-amino-6-deoxy-d-galactono-1,6-lactam (8) and 6-amino-6-deoxy-d-mannono-1,6-lactam (13) in 74 and 67% overall yield, respectively.     

Electro-oxidation of d-mannose on platinum, gold and nickel electrodes in aqueous medium

The oxidation of d-mannose is studied on platinum, gold and nickel in alkaline medium. The electro-reactivity of this compound and the rate determining step of the reactions were determined by cyclic voltammetry. Lead adatoms have important effect on the oxidation of d-mannose on platinum electrode. Five folder of increase in current densities was observed after the addition of 10⁻⁶ M Pb²⁺. Electrolyses carried out on upd-lead modified platinum, and gold electrodes show good conversion yields (75% and 80%, respectively) and reasonable selectivities towards mannonic acid. High amount of cleavage products were detected at the end of the electrolysis at nickel electrode. The reactivity-functional group relationship has been discussed considering the results of the electrolyses.     

A convenient synthesis of l-ribose from d-fructose

An efficient method for the stereoselective synthesis of l-ribose was accomplished starting from commercially inexpensive d-fructose. The intermediates in the process can serve as versatile precursors for the preparation of l-nucleoside analogues.     

Novel practical synthesis of d-cycloserine

The synthesis of d-cycloserine has been successfully accomplished from the readily available d-serine through three simple and efficient routes. In each synthetic strategy, cyclization reactions are involved as the key step, and one-pot processes are employed. The simple treatment and mild reaction conditions are attractive features in this methodology.     

Total synthesis of (−)-microcarpalide from d-mannitol

The total synthesis of the actin-targeting metabolite (−)-microcarpalide is described. Ring-closing metathesis of a dienic ester was used as the key step. d-Mannitol was used as the chiral pool material for the construction of the olefinic acid moiety as well as the olefinic alcohol moiety of the molecule.     

Characterization and release of triptolide-loaded poly (d,l-lactic acid) nanoparticles

Triptolide (TP), which has immunosuppressive effect, anti-neoplastic activity, anti-fertility function and severe toxicities on digestive, urogenital, blood circulatory system, was used as a model drug in this study. TP-loaded poly (d,l-lactic acid) (PLA) nanoparticles were prepared by the modified spontaneous emulsification solvent diffusion method (modified-SESD method). Dynamic light scattering system (DLS), transmission electron microscope (TEM), atomic force microscopy (AFM), differential scanning calorimetry (DSC), X-ray powder diffractometry and Fourier transform infra-red spectroscopy (FT-IR) were employed to characterize the nanoparticles fabricated for size and size distribution, surface morphology, the physical state of drug in nanoparticles, and the interaction between the drug and polymer. Encapsulation efficiency (EE) and the in vitro release of TP in nanoparticles were measured by the reverse phase high-performance liquid chromatography (RP-HPLC). The produced nanoparticles exhibited a narrow size distribution with a mean size of approximately 150 nm and polydispersity index of 0.088. The morphology of the nanoparticles exhibited a fine spherical shape with smooth surfaces without aggregation or adhesion. TP-entrapped in nanoparticles was found in the form of amorphous or semicrystalline. It was found that a weak interaction existed between the drug and polymer. In all experiments, more than 65% of EE were obtained. The in vitro release profile of TP from nanoparticles exhibited a typical biphasic release phenomenon, namely initial burst release and consequently sustained release. In this case, the particle size played an important role for the drug release. The modified-SESD method was a potential and advantage method to produce an ideal polymer nanoparticles for drug delivery system (DDS).     

Influence of cellulose nanowhiskers on the hydrolytic degradation behavior of poly(d,l-lactide)

This paper reports the preparation of bionanocomposites based on poly(d,l-lactide) and cellulose nanowhiskers (PDLLA/CNWs) and studies the influence of the CNWs on the hydrolytic degradation behavior of the polylactide. The hydrolytic degradation process was studied in a phosphate buffer medium through the sample weight loss and also by FTIR, DSC and TGA measurements. The presence of CNWs induced a strong delay in the hydrolytic degradation of the PDLLA, even when the concentration of the nanofillers was only 1%. This effect was related to the physical barrier created by the highly crystalline CNWs that inhibited water absorption and hence retarded the hydrolytic degradation of the bionanocomposites. In addition, the incorporation of cellulose nanocrystals in the PDLLA also made the biopolymer more thermally stable, increasing the initial temperature of mass loss even after the degradation in phosphate medium. The results presented here show the possibility of controlling the biodegradability and prolonging the service life of a polylactide through the incorporation of a small quantity of nanofillers obtained from renewable materials.     

One-pot inversion of d-mannono-1,4-lactone for the practical synthesis of l-ribose

l-Ribose was synthesized in a concise manner from d-mannono-1,4-lactone using one-pot inversion conditions. Treatment of d-mannono-1,4-lactone with piperidine, followed by mesylation-induced S_N2-type O-alkylation, afforded the desired one-pot inversion in an optimum yield, and the following straightforward transformations provided l-ribose in good yields.     

Fluorometric quantification of total d-gluconate by a flow-injection system using an immobilized-enzyme reactor

A method for the quantification of total d-gluconate by flow-injection analysis was developed using an immobilized-enzyme reactor and fluorescence detection. d-Gluconate was quantified using co-immobilized gluconate kinase (GK) and 6-phosphogluconate dehydrogenase (PGDH) reactor. d-Gluconate was phosphorylated to 6-phospho-d-gluconate by GK in the presence of ATP, and then the 6-phospho-d-gluconate produced was oxidized by PGDH with NADP⁺. The NADPH produced by the GK-PGDH reactor was monitored fluorometrically at 455 nm (excitation at 340 nm). A linear relationship between the responses and concentrations of d-gluconate was obtained in the ranges of 1.0 × 10⁻⁶–1.6 × 10⁻⁴ M. The relative standard deviation for 10 successive injections was 0.57% at the 0.1 mM level. This analytical method was applied to the quantification of d-gluconate in honeys, vinegars and noble rot wines, and the results showed good agreement with those obtained using the conventional F-kit method.     

Synthesis of homochiral 2-C-perfluoroalkyl substituted d- and l-riboses

Homochiral 2-C-perfluoroalkyl substituted d- and l-riboses were synthesized via Barbier, Grignard and Ruppert type reactions. The influence of the size of the perfluoroalkyl groups, attached to C-2, on the furanose/pyranose as well as on the α-furanose/β-furanose and α-pyranose/β-pyranose ratio in solution was studied.     

Kinetics of thermo-oxidative and thermal degradation of poly(d,l-lactide) (PDLLA) at processing temperature

Poly(d,l-lactide) (PDLLA) degraded at processing temperature under air and nitrogen. A random chain scission model was established and used to determine the activation energy E_a, and FT-IR, ¹H and ¹³C NMR were used to elucidate the degradation behavior under different atmospheres. Results showed that there were two to three stages. The 1st stage was dominated by the oligomers containing carboxylic acid groups and hydroxyl groups, during which oxygen and nitrogen had little effect on the degradation, thus they share similar E_a. When the oligomers were consumed over or evaporated, the 2nd stage began, and oxygen had a promoting effect on the thermo-oxidation process, resulting in the great decrease in E_a. The third stage of PDLLA was observed when it degraded under nitrogen over 200 °C, which was caused by the appearance of carboxylic acid substance.     

Efficient synthesis of new N-alkyl-d-ribono-1,5-lactams from d-ribono-1,4-lactone

d-Ribono-1,4-lactone was treated with ethylamine in DMF to afford N-ethyl-d-ribonamide 9a in quantitative yield. Bromination of amide 9a by the system SOBr₂ in DMF or PPh₃/CBr₄ in pyridine led, after acetylation, to epoxide 7. However, treatment of amide 9a with acetyl bromide in dioxane followed by acetylation gave 2,3,4-tri-O-acetyl-5-bromo-5-deoxyl-N-ethyl-d-ribonamide 10a. Methanolysis of 10a, with sodium methoxide, afforded the N-ethyl-d-ribonolactam 11a in 51% overall yields. Using this method, N-butyl, N-hexyl, N-dodecyl, and N-benzyl-d-ribonolactams 11b-e were obtained in good yields (48-53%).     

Swelling and hydrolytic degradation of poly(d,l-lactic acid) in aqueous solutions

Low molecular weight poly(lactic acid) was synthesized by direct polycondensation of lactic acid. The oligomers were characterized by viscometry, light scattering, and gel permeation chromatography (GPC). The swelling behaviour of tablets made of the above polymer immersed in buffer solutions at 37 °C was studied. In the same experiments, the hydrolytic stability of d,l-PLA was assessed by measuring the weight loss after drying the tablets. In order to inhibit any degradation due to bacteria, formaldehyde was added in the solution as biostatic factor. The effect of an incorporated drug on the swelling behaviour of d,l-PLA tablets was also considered. It was found that the incorporation of drug in d,l-PLA tablets increases their swelling index, probably due to the creation of additional porosity in the specimens or other interaction between drug and polymeric matrix.     

Interactions of aluminum(III) with the biologically relevant ligand d-ribose

Aluminum(III) can be absorbed when it is appropriately complexed. There are several plasma components which can bind weakly Al(III). Many proteins bind Al(III) in solution quite strongly. Carbohydrates bearing an abundance of electronegative functional groups can interact with metal cations. In solution, d-ribose exists as a mixture at equilibrium of many isomers and only a few of them bear a ‘complexing’ sequence of the hydroxyl groups. The presence of d-ribose in an Al(III) solution experiences a decrease of its Brönsted-acid sites. The lowering of the Brönsted acidity of an Al(III)-d-ribose mixture suggests the existence of attractive interactions (‘association’) between Al(III) ion and the complexing sequence of the hydroxyls of d-ribose. There is enhancement in the stability of the interaction complexes between Al(III) and d-ribose through strong intramolecular hydrogen bonding, which offers the possibility to investigate the kinetics of the subsequent proton release reactions. On the basis of the kinetic results, it may be concluded that proton release reactions, which are associated with the complexation reactions, are associatively activated. The complexes (Al(H₂O)_6−n(d-ribose_−nH)⁽³⁻ⁿ⁾⁺) resulting from the various ‘complexing’ forms of d-ribose are formed at mainly acidic pH. As the pH increases, the values of the activation enthalpy, ΔH^≠, are changing, because of the formation of mixed hydroxo-complexes (Al(H₂O)_6−n−m(OH)_m(d-ribose_−nH)^(3−n−m)+); finally, OH⁻ displaces d-ribose from the coordination sphere of Al(III) in a rather slow process, i.e. with high values of ΔH^≠; the activation enthalpy values, ΔH^≠, decrease with the progression of the displacement, becoming finally very small due to the formation of a precipitate. Chelate coordination of d-ribose with some divalent and trivalent metal ions has been also reported.     

An efficient synthesis of selectively functionalized d-rhamnose derivatives

d-Rhamnose is an important component of bacterial lipopolysaccharides. This paper describes a short and highly efficient synthesis of d-rhamnose from d-mannose. The synthesis of selectively C-4 modified d-rhamnosides and 6-deoxy-d-talosides as potential building blocks for complex oligosaccharide synthesis is also discussed.     

An efficient synthesis of d-ribo-C18-phytosphingosine and l-arabino-C18-phytosphingosine from d-fructose

d-ribo-C₁₈-phytosphingosine and l-arabino-C₁₈-phytosphingosine were synthesised starting from commercially inexpensive d-fructose. Metal-mediated fragmentation and stereoselective reduction were used as key steps to provide the hydrophilic portion of d-ribo and l-arabino phytosphingosines. Grubbs’ cross-metathesis and hydrogenation allowed the incorporation of hydrophobic tail.