Thermal expansion and magnetostriction in Pr(n+2)(n+1)Nin(n−1)+2Sin(n+1) compounds

Thermal expansion and magnetostriction of members of a homologous series of compounds based on the alloy series Pr_(n+2)(n+1)Ni_n(n−1)+2Si_n(n+1) have been measured. The crystal structures of these compounds are closely interrelated because they form trigonal prismatic columns in which the number of trigonal prisms that form the base of the trigonal columns is determined by the value of n in the chemical formula. Two compositions were investigated, Pr₅Ni₂Si₃ and Pr₁₅Ni₇Si₁₀, corresponding to n=3$n=3$ and n=4,$n=4,$ respectively. The results were analyzed and used to determine the location of magnetic phase transitions by calculating the magnetic contribution to thermal expansion using the Gruneisen–Debye theory. This allowed more precise determination of the magnetic transition temperatures than could be achieved using the total thermal expansion. The results show two phase transitions in each material, one corresponding to the Curie temperature and the other at a lower temperature exhibiting characteristics of a spin reorientation transition.     

Phase stability,elastic, electronic,thermal and optical properties of Ti3Al1−xSixC2 (0≤x≤1): First principle study

The structural parameters with stability upon Si incorporation and elastic, electronic, thermodynamic and optical properties of Ti₃Al_1−xSi_xC₂ (0≤x≤1) are investigated systematically by the plane wave pseudopotential method based on the density functional theory (DFT). The increase of some elastic parameters with increasing Si-content renders the alloys to possess higher compressive and tensile strength. The Vickers hardness value obtained with the help of Mulliken population analysis increases as x is increased from 0 to 1. The solid solutions considered are all metallic with valence and conduction bands, which have a mainly Ti 3d character, crossing the Fermi level. The temperature and pressure dependences of bulk modulus, normalized volume, specific heats, thermal expansion coefficient, and Debye temperature are all obtained through the quasi-harmonic Debye model with phononic effects for T=0−1000 K and P=0−50 GPa. The obtained results are compared with other results available. Further an analysis of optical functions for two polarization vectors reveals that the reflectivity is high in the visible–ultraviolet region up to ∼10.5 eV region showing promise as a good coating material.     

Ab initio studies of electronic spectra of the linear aluminum-bearing carbon chains AlC2nH (n = 1-5)

Geometries and stabilities of the linear aluminum-bearing carbon chains AlC_2nH (n = 1-5) in their ground states have been explored by the DFT-B3LYP and RCCSD(T) methods. Structures of the X¹Σ⁺ and 1¹Π electronic states have also been optimized by the CASSCF approach. The studies indicate that these species have single-triple bond alternate pattern, AlCCCC?CCH, and the electronic excitation from X¹Σ⁺ to 1¹Π leads to the shortening of the AlC bonds. The vertical excitation energies of the 1¹Π ← X¹Σ⁺ and 2¹Π ← X¹Σ⁺ transitions for AlC_2nH (n = 1-5) have been investigated by the CASPT2, EOM-CCSD, and TD-B3LYP levels of theory with the cc-pVTZ basis set, respectively. CASPT2-predicted 1¹Π ← X¹Σ⁺ transition energies are 3.57, 3.44, 3.33, 3.26, and 3.21 eV, respectively. For AlC₂H, our estimate agrees very well with the experimental value of 3.57 eV. In addition, the AlC bond dissociation energies and the exponential-decay curves for these vertical excitation energies are also discussed.     

关于Al_nC和Al_nC~+(n=1—8)团簇结构和稳定性的研究

通过采用7种密度泛函理论DFT方法对AlnC进行计算,所得结果与实验数据比较,选择了B3lyp方法和6-311G(d)基组对AlnC及AlnC+(n=1—8)团簇进行结构优化和频率分析,得到了AlnC及AlnC+基态以及亚稳态结构.当n从小到大变化时,这些团簇的结构从平面向立体过渡,平面构型以三角形为主,立体构型主要是三棱柱笼状结构;在这些团簇中的高对称性结构中,中性团簇和阳离子只能有其一是稳定构型;在所研究的团簇中,Al2C和Al5C团簇较为稳定.     

On the existence of a homologous series of BamCum+nOy oxides with the cubic structure of the BaCuO2 oxide

Phase relations have been studied in the BaO–CuO_x system in the range of 42.0–83.0 mol.% CuO at P(O₂) = 21 kPa (air) by visual polythermal analysis (VPA), powder X-ray diffraction (XRD), differential thermal analysis (DTA), thermogravimetric analysis (TGA), chemical analysis (CA), and electron diffraction (ED) with simultaneous elemental analysis (EA) in a transmission electron microscope (TEM). The existence of discrete crystallization fields of barium–copper oxides of cation compositions Ba₄Cu₅O_y, Ba₅Cu₆O_y, Ba₇Cu₈O_y, Ba₁₂Cu₁₃O_y, and Ba₂₄Cu₂₅O_y, which have the cubic structure of the BaCuO₂ oxide, is revealed in the studied region of the system. The oxides may be represented as members of a Ba_mCu_m+nO_y homologous series. The BaCuO₂ oxide does not exist in the subsolidus region and does not have its own crystallization field. The oxygen-deficient oxide BaCuO_1.78 of the cation composition (Ba:Cu) 1:1 with the BaCuO₂ cubic structure is found in melted samples of the 50.0 mol.% CuO composition quenched at 1020–1060 °С.     

Quasi-two-dimensional magnetism in (CnH2n+1NH3)2CuCl4 studied by electron paramagnetic resonance

The quasi-two-dimensional magnetism in the layered transition metal compound (C_nH_2n+1NH₃)₂CuCl₄ (n=10, 14) was investigated by means of electron paramagnetic resonance (EPR) and superconducting quantum interference device measurements. As a result, the high temperature magnetic phase transitions were reflected in the EPR parameters in a sensitive manner.     

External cavity tunable diode laser spectra of the ν1 + 2ν4 stretch-bend combination bands of NH3 and NH3

The ammonia ν₁ + 2ν₄ perpendicular stretch-bend combination band has been investigated in spectra of ¹⁴NH₃ and ¹⁵NH₃ recorded in the 6400-6800 cm⁻¹ region with an external cavity tunable diode laser (ECTDL) spectrometer. For ¹⁴NH₃, new assignments were determined initially by extrapolating from published low-J jet-cooled beam results up to transitions of higher J and K. Corresponding ν₁ + 2ν₄ transitions for the ¹⁵NH₃ species were then found by identifying similar patterns of lines with a characteristic downshift of approximately 9.7 cm⁻¹. Assignments were confirmed employing ground-state combination differences. Term values, a-s inversion splittings, l-doubling energies and parameter estimates from simple single-state fits are reported for the two ammonia species.     

Mechanical properties and electronic structure of TiC,Ti0.75W0.25C,Ti0.75W0.25C0.75N0.25, TiC0.75N0.25 and TiN

The first-principles calculations are performed to investigate the mechanical properties and electronic structure of TiC, Ti_0.75W_0.25C, Ti_0.75W_0.25C_0.75N_0.25, TiC_0.75N_0.25 and TiN. Density functional theory and ultrasoft pseudopotentials are used in this study. From the formation energy, it is found that nitrogen can increase the stability of TiC. The calculated elastic constants and elastic moduli of TiC compare favorably with other theoretical and experimental values. Tungsten and nitrogen are observed to significantly increase the bulk, shear and Young's modulus of TiC. Through the analysis of B/G and Cauchy pressure, tungsten can significantly improve the ductility of TiC. The electronic structure of TiC, TiN, Ti_0.75W_0.25C, Ti_0.75W_0.25C_0.75N_0.25, and TiC_0.75N_0.25 are used to describe nonmetal–metal and metal–metal bonds. Based on the Mulliken overlap population analysis, the hardness values of TiC, Ti_0.75W_0.25C, Ti_0.75W_0.25C_0.75N_0.25, TiC_0.75N_0.25 and TiN are estimated.     

Molecular dynamics simulations on local structure and diffusion in liquid TixAl1−x alloys

The microscopic structure and dynamics of liquid Ti_xAl_1-x alloys together with pure liquid Ti and Al metals were investigated by means of molecular dynamics simulations. This work gives the structural properties, including pair-correlation function, bond-angle distribution function, HA and Voronoi indices, and their composition dependence. The dynamical properties have also been studied. The calculated pair-correlation function, bond-angle distribution function, and HA and Voronoi indices suggest that the stoichiometric composition Ti_0.75Al_0.25 exhibits a different local structure order compared with other concentrations, which help us understand the appearance of the minimum diffusion coefficient at this composition. These results indicate that the mobility of atoms strongly depends on their atomic local structure.     

Luminescence investigation of red phosphors Ca0.54Sr0.34−1.5xEu0.08Smx(MoO4)y (WO4)1−y for UV-white LED device

Ca_0.54Sr_0.34−1.5xEu_0.08Sm_x(MoO₄)_y (WO₄)_1−y red phosphors were prepared by solid-state reaction using Na⁺ as a charge compensator for light-emitting diodes (LED). The effects of Na⁺ concentration, synthesis temperature, reaction time and Eu³⁺ concentration were studied for the properties of luminescence and crystal structure of red phosphors. The results show that the optimum reaction condition is 6%, 900 °C, 2 h and 8%. The photoluminescence spectra show that red phosphors are effectively excited at 616 nm by 292, 395 and 465 nm. The wavelengths of 465 nm nicely match the widely applied emission wavelengths of blue LED chips.     

Preparation and characterization of the layered hybrids (CnH2n+1NH3)2FeCl4

The series of the hybrids (C_nH_2n+1NH₃)₂FeCl₄, where n=2, 4, 6, 8, 10 and 12, were synthesized in HCl solutions. The optimum conditions of synthesis were investigated including the sequence of adding reactants, the stoichiometric ratio of the reactants, the reaction time and the drying procedures. The results demonstrate that the order of adding reactants, the drying temperature and drying time have little effect on the structures of the products. But for the hybrids of n?10, longer reaction time is needed to form the layered structures. The X-ray diffraction (XRD) patterns and the images of scanning electron microscopy of the products demonstrate that the hybrids crystallize well with typical layered structures. Chemical analysis of C, H and N confirms that the hybrids consist of the elements in the ratio of the molecular formulas. The d values, the interlayer distance between the two adjacent inorganic sheets of each hybrid, are obtained from the XRD patterns and they suggest that the organic chains interdigitate between the inorganic sheets. The longer the organic chains are, the more interdigitations there are. This can be explained by the different interaction strengths between the organic species when the chain lengths change. These different interactions can also explain the phenomena observed in the synthesis and the decomposing temperatures of the hybrids.     

Composition-dependent structural and electrical properties of PbSe1−xTex thin films

Polycrystalline PbSe_1−xTe_x ingots were prepared by solid-state microwave synthesis. Thin films of PbSe_1−xTe_x were then deposited onto clean glass substrates using vacuum evaporation technique. Their nanostructure morphologies and stoichiometric ratio were examined using scanning electron microscopy (SEM) and energy dispersive X-ray spectra (EDX). X-ray diffraction (XRD) patterns indicated that the lattice constants of PbSe_1−xTe_x powders and thin films increased with the increasing amount of Te. From the electrical property measurements, the thin films were characterized by n-type behavior.     

Epitaxial MoOx nanostructures on TiO2(1 1 0) obtained using thermal decomposition of Mo(CO)6

Stoichiometric and highly-defective TiO₂(1 1 0) surfaces (called as yellow and blue, respectively) were exposed to Mo(CO)₆ vapours in UHV and in a reactive O₂ atmosphere. In the case of yellow-TiO₂, an O₂ reactive atmosphere was necessary to obtain the Mo(CO)₆ decomposition at 450 °C with deposition of MoO_x nanostructures where, according to core level photoemission data, the Mo⁺⁴ state is predominant. In the case of blue-TiO₂ it was possible to obtain Mo deposition both in UHV and in an O₂ atmosphere. A high dose of Mo(CO)₆ in UHV on blue-TiO₂ allowed the deposition of a thick metallic Mo layer. An air treatment of this sample at 580 °C led to the elimination of Mo as MoO₃ and to the formation of a transformed layer of stoichiometry of Ti_(1−x)Mo_xO₂ (where x is close to 0.1) which, according to photoelectron diffraction data, can be described as a substitutional near-surface alloy, where Mo⁺⁴ ions are embedded into the titania lattice. This embedding procedure results in a stabilization of the Mo⁺⁴ ions, which are capable to survive to air exposure for a rather long period of time. After exposure of the blue-TiO₂(1 1 0) substrate to Mo(CO)₆ vapours at 450 °C in an O₂ atmosphere it was possible to obtain a MoO₂ epitaxial ultrathin layer, whose photoelectron diffraction data demonstrate that is pseudomorphic to the substrate.     

Effect of hydrogen-doping on bonding properties of Ti3SiC2

Using the first principles method based on the density functional theory, we investigated the effect of hydrogen-doping on bonding properties of Ti₃SiC₂. The formation energies of hydrogen interstitials in three possible positions were calculated. The results show that hydrogen favors residing near the (0 0 1) Si plane. In these positions, hydrogen is hybridized most with 1s states of lattice atoms (Si and C), instead of Ti. The presence of hydrogen does not substantially influence the bonding nature of Ti₃SiC₂; chemical bonding is characterized by the hybridizations of Ti d-Si p and Ti d-C p states, and yields high strength. This is contrary to hydrogen-doping in transition metals, where the electron of hydrogen fills in the d bands of the metals and, as a consequence, decreases the cohesive strength of the lattice.     

The ν1 + 3ν2 + 3ν3 and 4ν1 + ν2 + ν3 bands of ozone by CW-cavity ring down spectroscopy between 5900 and 5960 cm

The absorption spectrum of ozone, ¹⁶O₃, has been recorded in the 5903-5960 cm⁻¹ region by high sensitivity CW-cavity ring down spectroscopy (α_min ∼ 5 × 10⁻¹⁰ cm⁻¹). The ν₁ + 3ν₂ + 3ν₃ and 4ν₁ + ν₂ + ν₃ A-type bands centred at 5919.15 and 5947.07 cm⁻¹ were newly observed. A set of 173 and 168 energy levels could be experimentally determined for the (1 3 3) and (4 1 1) states, respectively. Except for a few K_a = 5 levels of the (4 1 1) state, the rotational structure of the two states was found mostly unperturbed. The spectroscopic parameters were determined from a fit of the corresponding line positions by considering the (1 3 3) and (4 1 1) states as isolated. The determined effective Hamiltonian and transition moment operators were used to generate a list of 785 transitions given as Supplementary Material.     

三明治结构Tan(B3N3H6)n+1 团簇的磁性和量子输运性质

利用密度泛函理论和非平衡格林函数方法, 本文对小尺寸团簇Ta_n(B₃N₃H₆)_n+1 (n ≤ 4)的磁性和量子输运性质进行了系统的研究. 计算结果表明, 此类体系采用三明治结构作为其基态并且具有较高的稳定性. 体系的磁矩随团簇尺寸的增大而线性增大. 当把Ta_n(B₃N₃H₆)_n+1团簇耦合到Au电极上时, 形成的Au-Ta_n(B₃N₃H₆)_n+1-Au体系在有限偏压下展示出了较强的自旋过滤能力, 因而可以被看做是一类新型的低维自旋过滤器.     

Luminescent properties of KGd1−x(WO4)2:Eux and KGd1−x(WO4)2−y(MoO4)y:Eux phosphors in UV-VUV regions

KGd_1−x(WO₄)_2−y(MoO₄)_y:Eu³⁺_x(0.1?x?0.75, y=0 and 0.2) phosphors are synthesized through traditional solid-state reaction and their luminescent properties in ultraviolet (UV) and vacuum ultraviolet (VUV) regions are investigated. Under 147 nm excitation, these phosphors show characteristic red emission with good color purity. In order to improve their emission intensity, the MoO₄²⁻ (20 wt%) is introduced into the anion of KGd_1−x(WO₄):Eu³⁺_x. The Mo⁶⁺ and Eu³⁺ co-doped KGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped KGd(WO₄)₂ in VUV region. The chromaticity coordination of KGd_0.45(WO₄):Eu³⁺_0.55 is (x=0.669, y=0.331), while that of KGd_0.45(WO₄)_1.8(MoO₄)_0.2:Eu³⁺_0.55 is (x=0.666, y=0.334) in VUV region.     

Electronic structures and optical properties of rutile TiO2 with different point defects from DFT + U calculations

The electronic states and formation energies of four types of lattice point defects in rutile TiO₂ are studied using the first-principles calculations. The existence of oxygen vacancy leads to a deep donor defect level in the forbidden band, while the Ti interstitial forms two local states. It is predicted that oxygen vacancy prefers to combine with Ti-interstitial to form V_O–Ti_i dimer by a partial 3d electron transfer from the Ti_i to its neighboring V_O. The charge distribution between a Ti interstitial and its neighboring Ti ions partially shields the Coulomb interactions. Lastly, optical properties of these defective lattices are discussed.     

Iron isotope effect on Tc in optimally-doped (Ba,K)Fe2As2 (Tc = 38 K) and SmFeAsO1−y (Tc = 54 K) superconductors

We report the iron isotope effect on a transition temperature (T_c) in an optimally-doped (Ba,K)Fe₂As₂ (T_c = 38 K) and SmFeAsO_1−y (T_c = 54 K) superconductors. In order to obtain the reliable isotope shift in T_c, twin samples with different iron isotope mass are synthesized in the same conditions (simultaneously) under high-pressure. We have found that (Ba,K)Fe₂As₂ shows an inverse iron isotope effect α_Fe = −0.18 ± 0.03 while SmFeAsO_1−y shows a small iron isotope effect α_Fe = −0.02 ± 0.01, where the isotope exponent α is defined by T_c ∼ M^−α (M is the isotopic mass). The results show that α_Fe changes in the iron-based superconductors depending on the system. The distinct iron isotope effects imply the exotic coupling mechanism in the iron-based superconductors.     

Optical and physical properties of different composition of InxSe1−x thin films

Thin film binary alloys of In_xSe_1−x (0.05?x?0.30) have been prepared by the thermal evaporation technique. The optical transmission and reflection spectrum of these films were measured in the range 300-1100 nm. Both refractive index, n and extinction coefficient k have been determined from transmission and reflection measurements in terms of Murmann's equations. The dispersion of the refractive index is discussed in terms of the single-oscillator Wemple-DiDomenico model. The width of band tail is determined and the optical absorption edge is described using the ‘non-direct transition’ model proposed by Tauc. Finally, the relationship between the optical gap and chemical composition in In_xSe_1−x amorphous system is discussed in terms of the average heat of atomization H_s and average coordination number N_c. The results of these calculations can be used rationalize the observed optical properties of these materials. Finally, the chemical bond approach has been also applied to interpret the decrease of the glass optical gap with increasing In content.