First-principles calculations to investigate optical properties of ByAlxIn1−x−yN alloys for optoelectronic devices

First-principles density-functional theory of Full-Potential Linear Augmented Plane Wave (FP-LAPW) within local density approximation (LDA) of the optical properties of B_yAl_xIn_1−x−yN systems (with x = 0.187 and y = 0.062, 0.125 and 0.187) has been performed. Substitutional atoms of Boron induced in small amounts into the (Al_xIn_1−x)-cationic sublattice of AlInN affects the energy gap of BAlInN. The higher band gap of Al_0.375In_0.625N alloy can form a useful quantum well (QW) laser structure. A best choice of B-content, B_yAl_xIn_1−x−yN could be an alternative to Al_xIn_1−xN. The results of accurate calculations of the band structures and optical properties show the better performance characteristics belong to the structure containing B-content (y) of 12.5%. The NaCl metallic B_yAl_0.1875In_0.8125−yN has a direct character for y = 12.5%. The imaginary part of dielectric function, reflectivity, refractive index, absorption coefficient and optical conductivity are investigated well and provide reasonable results for optoelectronic devices applications.     

Experimental investigation of long-wavelength optical lattice vibrations in quaternary AlxInyGa1−x−yN alloys and comparison with results from the pseudo-unit cell model

Raman and Fourier transform infrared (FTIR) spectroscopies have been utilized to measure long-wavelength optical lattice vibrations of high-quality quaternary Al_xIn_yGa_1−x−yN thin films at room temperature. The Al_xIn_yGa_1−x−yN films were grown on c-plane (0 0 0 1) sapphire substrates with AlN as buffer layers using plasma assisted molecular beam epitaxy (PA-MBE) technique with aluminum (Al) mole fraction x ranging from 0.0 to 0.2 and constant indium (In) mole fraction y=0.1. Pseudo unit cell (PUC) model was applied to investigate the phonons frequency, mode number, static dielectric constant, and high frequency dielectric constant of the Al_xIn_yGa_1−x−yN mixed crystals. The theoretical results were compared with the experimental results obtained from the quaternary samples by using Raman and FTIR spectroscopies. The experimental results indicated that the Al_xIn_yGa_1−x−yN alloy had two-mode behavior, which includes A₁(LO), E₁(TO), and E₂(H). Thus, these results are in agreement with the theoretical results of PUC model, which also revealed a two-mode behavior for the quaternary nitride. We also obtained new values of E₁(TO) and E₂(H) for the quaternary nitride samples that have not yet been reported in the literature.     

Structural and magnetic properties of ferromagnetic In1−xMnxAs1−yPy layers

The structural and magnetic properties of epitaxial In_1−xMn_xAs_1−yP_y quaternary layers with Mn content ranging from 0.01 to 0.04 and phosphorous content ranging from 0.11 to 0.21 were studied. X-ray diffraction indicated that the films were two phase consisting of an InMnAsP solid solution and hexagonal MnAs nanoprecipitates. Addition of phosphorus promoted precipitate formation. Films were ferromagnetic showing hysteretic behavior in the field dependence of magnetization at 5 and 298 K. From field-cooled magnetization measurements ferromagnetic transitions were observed at 280 and 325 K. The zero field-cooled magnetization versus temperature measurements showed irreversibility for T<300 K that was attributed to the presence of MnAs nanoprecipitates. The calculated coercivity using the Neel model was 1380 G compared to the experimental value of 380 G at 5 K. The difference was attributed to a strong inter-cluster exchange that stabilizes the ferromagnetic state.     

Magnetism on Mg1−xZnxCyNi3

The magnetic phase diagram for Mg_1−xZn_xC_yNi₃ has been tentatively constructed based on magnetization and muon spin relaxation (μSR) measurements. The superconducting phase was observed to fade as x (y) increases (decreases). The low y samples show early stages of long-range ferromagnetism, or complete long-range ferromagnetism. In the phase diagram, the ferromagnetic phase exists in addition to the superconducting phase, suggesting that there is some correlation between superconductivity and ferromagnetism, even though the coexistence of ferromagnetism and superconductivity is not observed from the μSR measurements down to 20 mK for the superconducting sample (T_c=2.5 K, (x, y)=(0, 0.9)).     

Dependence of the interband transitions on the in mole fraction and the applied electric field in InxGa1−xAs/In0.52Al0.48As multiple quantum wells

Transmission electron microscopy (TEM) and photocurrent (PC) measurements were carried out to investigate the microstructural properties and excitonic transitions in In_xGa_1−xAs/In_0.52Al_0.48As multiple quantum wells (MQWs) for x = 0.54, 0.57 and 0.60. TEM images showed that high-quality 11-period In_xGa_1−xAs/In_0.52Al_0.48As MQWs had high-quality heterointerfaces. The results for the PC spectra at 300 K showed that the peaks corresponding to the excitonic transitions from the ground state electronic sub-band to the ground state heavy-hole band (E₁-HH₁) and the ground state electronic sub-band to the ground state light-hole band (E₁-LH₁) became closer to each other with decreasing In mole fraction and that E₁-HH₁ and E₁-LH₁ excitonic peaks shifted to longer wavelength with increasing applied electric field. The calculated values of the E₁-HH₁ interband transition energies were in qualitative agreement with those obtained form the PC measurements with and without applied electric field. These results can be helpful in understanding potential applications of In_xGa_1−xAs/In_yAl_1−yAs MQWs dependent on In mole fraction and applied electric field in long-wavelength optoelectronic devices.     

Hydrogenic impurity states in zinc-blende InxGa1−xN/GaN in cylindrical quantum well wires

Within the framework of effective-mass approximation, the binding energy of a hydrogenic donor impurity in zinc-blende (ZB) In_xGa_1−x  N/GaN cylindrical quantum well wires (CQWWs) is investigated using variational procedures. Numerical results show that the ground-state donor binding energy _Eb$E_b$ is highly dependent on the impurity position and the CQWWs structure parameters. The donor binding energy for a shallow donor impurity located at the center of the CQWWs is the largest. As the impurity position changes from the center of the wire to its edge, the donor binding energy gets smaller. Also, we have found that In concentration is a very important value to tailor the system, since the binding energies close to binding energy maxima are strongly dependent on In content.     

The synthesis and the magnetic properties of Gd-doped FexCo1−x/CoyFe3−yO4 micro-octahedrons composites

Gd³⁺-substituted micro-octahedron composites (Fe_xCo_1−x/Co_yGd_zFe_3−y−zO₄) in which the Fe-Co alloy has either a bcc or fcc structure and the oxide is a spinel phase were fabricated by the hydrothermal method. The X-ray diffraction (XRD) patterns indicate that the as-synthesized Gd³⁺-substituted micro-octahedron composites are well crystallized. Scanning electron microscopy (SEM) images show that the final product consists of larger numbers of micro-octahedrons with the size ranging from 1.3 to 5 μm, and the size of products are increased with increasing the concentration of KOH. The effect of the Co²⁺/Fe²⁺ ratio (0?Co²⁺/Fe²⁺?1) and substitution Fe³⁺ ions by Gd³⁺ ions on structure, magnetic properties of the micro-octahedrons composites were investigated, and a possible growth mechanism is suggested to explain the formation of micro-octahedrons composites. The magnetic properties of the structure show the maximal saturation magnetization (107 emu/g) and the maximal coercivity (1192 Oe) detected by a vibrating sample magnetometer.     

Ca1−xMo1−ySiyO4:Eux: A novel red phosphor for white light emitting diodes

Single phase of Ca_1−xMo_1−ySi_yO₄:Eu_x³⁺ (0.18?x?0.26, 0?y?0.04) was synthesized by solid-state method. The photoluminescence investigation indicated that Ca_1−xMoO₄:Eu_x³⁺ (0.18?x?0.26) could be effectively excited by 393 and 464 nm, and it exhibited an intense red emission at 615 nm. The introduction of Si⁴⁺ ions did not change the position of the peaks but strongly enhanced the emission intensity of Eu³⁺ under 393 and 464 nm excitations and showed very good color purity. The emission intensity of optimal Ca_0.8Mo_0.98Si_0.02O₄:Eu_0.2³⁺ sample (excited by 393 nm) was about 5.5 times higher than that of the phosphor Y₂O₂S:0.05Eu³⁺. So this phosphor could be nicely suitable for the application of the UV LED chips.     

Temperature phase-matching properties of mixed chalcopyrite AgGa1−xInxS2 crystal

AgGa_1−xIn_xS₂ with x = 0.14 ± 0.01 was found to be 90° phase-matchable for the second harmonic generation (SHG) of CO₂ laser radiation at 10.591 μm at 203 °C. In addition, temperature-tuned 90° phase-matched difference frequency generation (DFG) at 4.02 μm was demonstrated by mixing the idler output of a Nd:YAG third harmonic pumped β-BBO optical parametric oscillator and its fundamental source at 1.0642 μm. The Sellmeier and thermo-optic dispersion formulas that reproduce well these experimental data are presented.     

Exciton in wurtzite GaN/AlxGa1−xN coupled quantum dots

Based on effective-mass approximation, we present a three-dimensional study of the exciton in GaN/Al_xGa_1−xN vertically coupled quantum dots (QDs) by a variational approach. The strong built-in electric field due to the piezoelectricity and spontaneous polarization is considered. The relationship between exciton states and structural parameters of wurtzite GaN/Al_xGa_1−xN coupled QDs is studied in detail. Our numerical results show that the strong built-in electric field in the GaN/Al_xGa_1−xN strained coupled QDs leads to a marked reduction of the effective band gap of GaN QDs. The exciton binding energy, the QD transition energy and the electron-hole recombination rate are reduced if barrier thickness L^AlGaN is increased. The sizes of QDs have a significant influence on the exciton state and interband optical transitions in coupled QDs.     

Magnetic properties of half-metallic semi Heusler Co1−xCuxMnSb compounds

A study of the half-metallic character of the semi Heusler alloys Co_1−xCu_xMnSb (0?x?0.9) is presented. We investigated the saturation magnetization M_S at temperatures from 5 K to room temperature and the temperature dependence of the DC magnetic susceptibility χ above Curie temperature T_C. The magnetic moments at 5 K, for most compositions are very close to the quantized value of 4 μ_B for Mn³⁺ ion, the compound with 90% Co substituted by Cu is still ferromagnetic with M_S (5 K)=3.78 μ_B/f.u. These results emphasize the role of Co atoms in maintaining the ferromagnetic order in the material. The Curie temperature is decreased from 476 K to about 300 K as the Cu content increases from 0% to 90%. Above T_C, the χ⁻¹ vs T curves follow very well the Curie–Weiss law. The effective moment μ_eff and paramagnetic Curie temperature θ are derived. A comparison between the values of M_S at 5 K and μ_eff shows a transition from localized to itinerant spin system in these compounds.     

Dielectric properties of valence compensated Ca1−xBixTi1−xCrxO3 perovskite prepared using the sol-gel process

Ca_1−xBi_xNb_1−xCr_xO₃ (x=0.01-0.5) ceramic powders were synthesized using the sol-gel process. The single-phase solids can be presented at x=0.01 and 0.03. The coexistence of orthorhombic perovskite and the secondary phase of BiCrO₃ was verified, as presented for x=0.05-0.5. Grains with a micro-cube topography were obtained for x=0.3-0.5. The average grain size is about 0.4 and 1.1 μm for x=0.3 and 0.5, respectively. The highest dielectric constant peak was measured at around 55 °C for x=0.5 and at 75 °C for x=0.3. The high dielectric constant was caused by the formation of barrier layers at the interface of the bi-phase mixed ceramics. Space charge polarization contributed to the observed behavior.     

Effects of Zn on the grain boundary properties of La2−xSrxCu1−yZnyO4 superconductors

The properties of the grain boundaries (GBs) are of significant importance in high-T_c cuprates. Most large scale applications of cuprate superconductors involve usage of sintered compounds. The critical current density and the ability to trap high magnetic flux inside the sample depend largely on the quality of the GBs. Zn has the ability to pin vortices but it also degrades superconductivity. In this study we have investigated the effect of Zn impurity on the intergrain coupling properties in high-quality La_2−xSr_xCu_1−yZn_yO₄ sintered samples with different hole concentrations, p (≡x), over a wide range of Zn contents (y) using field-dependent AC susceptibility (ACS) measurements. The ACS results enabled us to determine the superconducting transition temperature T_c, and the temperature T_gcp, at which the randomly oriented superconducting grains become coupled as a function of hole and disorder contents. We have analyzed the behavior of the GBs from the systematic evolution of the values of T_gcp(p, y), T_c(p, y), and from the contribution to the field-dependent ACS signal coming from the intergrain shielding current. Zn suppresses both T_c and T_gcp in a similar fashion. The hole content and the carrier localization due to Zn substitution seem to have significant effect on the coupling properties of the GBs. We have discussed the possible implications of these findings in detail in this article.     

Ferromagnetic semiconductor Ge1−x−ySnxMnyTe with phase transformation of ferroelectric type

It is expected that joint existence of ferromagnetic properties and ferroelectric structural phase transition in diluted magnetic semiconductors IV-VI leads to new possibilities of these materials. Temperature of ferroelectric transition for such crystals can be tuned by the change of Sn/Ge ratio. Magnetic susceptibility, Hall effect, resistivity and thermoelectric power of Ge_1−x−ySn_xMn_yTe single crystals grown by Bridgeman method (x=0.083-0.115; y=0.025-0.124) were investigated within 4.2-300 K. An existence of FM ordering at T_C∼50 K probably due to indirect exchange interaction between Mn ions via degenerated hole gas was revealed. A divergence of magnetic moment temperature dependences at T?T_C in field-cooled and zero-field-cooled regimes is obliged to magnetic clusters which are responsible for superparamagnetism at T>T_C≈T_f (freezing temperature) and become ferromagnetic at T_C arranging spin glass state at T<T_f≈T_C. Phase transition of ferroelectric type at T≈46 K was revealed. Anomalous Hall effect which allows to determine magnetic moment was observed.     

High Bs nanocrystalline Fe84−x−yCuxNbySi4B12 alloys (x=0.0-1.4, y=0.0-2.5)

In this study, Cu and Nb content dependences of magnetic properties for annealed Fe_84−x−yCu_xNb_ySi₄B₁₂ alloy ribbons fabricated by melt spinning were investigated. In Fe_83−xCu_xNb₁Si₄B₁₂ alloy systems, the coercivity H_c markedly decreases with increasing x and exhibits a minimum at around x=1.0-1.2, while the saturation magnetic flux density B_s shows a slight variation. In Fe_83−yCu₁Nb_ySi₄B₁₂ alloy systems, H_c markedly decreases at around y=0.5, while B_s shows a monotonic decrease. Fe₈₂Cu₁Nb₁Si₄B₁₂ nanocrystalline alloy ribbons exhibit a high B_s of 1.78 T and a low H_c of 3.2 A/m. The core losses of the present alloys at 1.0 T at 400 Hz, P_10/400, and at 1.0 T at 1 kHz, P_10/1k, are 1.3 and 4.4 W/kg, respectively.     

VUV-UV luminescence of magnetoplumbite: (Sr0.96−xBa0.04)Al12−yMgyO19:Tbx

The title compounds (Sr_0.96−xBa_0.04)Al_12−yMg_yO₁₉:Tb_x (0<x<0.4; 0<y<0.18) are single-phase magnetoplumbite determined by X-ray powder diffraction analysis. The characteristic emission lines of ⁵D₃→⁷F_j (j=2, 3, 4, 5) and ⁵D₄→⁷F_j (j=4, 5, 6) of Tb³⁺ are recorded under the VUV excitation. The intensive luminescence mainly comes from ⁵D₃→⁷F_j transition when the concentration of Tb³⁺ is low. However, when the concentration of Tb³⁺ starts to increase from very low concentration, ⁵D₄→⁷F_j transition is becoming dominant. Three broad excitation bands at 165, 193 and 233 nm have been observed. The band at 165 nm originates from the overlap between the host absorption and the charge transfer of Tb³⁺-O²⁻. The other two broad bands are the first spin-allowed and the spin-forbidden of 4f-5d transition, respectively. The experimental observation of the 4f-5d transition of Tb³⁺ is consistent well with the theoretical expectations.     

Magnetic anisotropy of Tb1−xGdxMn6Sn6 compounds

Magnetization curves of Tb_1−xGd_xMn₆Sn₆ compounds (0?x?1) have been measured for aligned powder samples in the temperature range 4.2–300 K in pulsed magnetic fields up to 30 T. Temperature and concentration dependences of the magnetocrystalline anisotropy constants K₁ and K₂ and concentration dependence of the temperature of spontaneous spin-reorientation transition have been determined. Using these data, we estimated the contribution of the manganese and terbium atoms to the magnetic anisotropy of Tb_1−xGd_xMn₆Sn₆ and analyzed the origin of the appearance of field-induced first-order magnetic phase transition in these compounds.     

Luminescent properties of KGd1−x(WO4)2:Eux and KGd1−x(WO4)2−y(MoO4)y:Eux phosphors in UV-VUV regions

KGd_1−x(WO₄)_2−y(MoO₄)_y:Eu³⁺_x(0.1?x?0.75, y=0 and 0.2) phosphors are synthesized through traditional solid-state reaction and their luminescent properties in ultraviolet (UV) and vacuum ultraviolet (VUV) regions are investigated. Under 147 nm excitation, these phosphors show characteristic red emission with good color purity. In order to improve their emission intensity, the MoO₄²⁻ (20 wt%) is introduced into the anion of KGd_1−x(WO₄):Eu³⁺_x. The Mo⁶⁺ and Eu³⁺ co-doped KGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped KGd(WO₄)₂ in VUV region. The chromaticity coordination of KGd_0.45(WO₄):Eu³⁺_0.55 is (x=0.669, y=0.331), while that of KGd_0.45(WO₄)_1.8(MoO₄)_0.2:Eu³⁺_0.55 is (x=0.666, y=0.334) in VUV region.     

Luminescence investigation of red phosphors Ca0.54Sr0.34−1.5xEu0.08Smx(MoO4)y (WO4)1−y for UV-white LED device

Ca_0.54Sr_0.34−1.5xEu_0.08Sm_x(MoO₄)_y (WO₄)_1−y red phosphors were prepared by solid-state reaction using Na⁺ as a charge compensator for light-emitting diodes (LED). The effects of Na⁺ concentration, synthesis temperature, reaction time and Eu³⁺ concentration were studied for the properties of luminescence and crystal structure of red phosphors. The results show that the optimum reaction condition is 6%, 900 °C, 2 h and 8%. The photoluminescence spectra show that red phosphors are effectively excited at 616 nm by 292, 395 and 465 nm. The wavelengths of 465 nm nicely match the widely applied emission wavelengths of blue LED chips.     

Structural and magnetic properties of Mg(In2−xMnx)O4 system

We synthesized the Mn-doped Mg(In_2−xMn_x)O₄ oxides with 0.03?x?0.55 using a solid-state reaction method. The X-ray diffraction patterns of the samples were in a good agreement with that of a distorted orthorhombic spinel phase. Their lattice parameters and unit-cell volumes decrease with x due to the substitution of the smaller Mn³⁺ ions to the larger In³⁺ ions. The undoped MgIn₂O₄ oxide presents diamagnetic signals for 5 K?T?300 K. The M(H) at T=300 K reveals a fairly negative-sloped linear relationship. Neither magnetic hysteresis nor saturation behavior was observed in this parent sample. For the Mn-doped samples, however, positive magnetization were observed between 5 and 300 K even if the x value is as low as 0.03. The mass susceptibility enhances with Mn content and it reaches the highest value of 1.4×10⁻³ emu/g Oe (at T=300 K) at x=0.45. Furthermore, the Mn-doped oxides with x=0.06 and 0.2, respectively, exhibit nonlinear magnetization curves and small hysteretic loops in low magnetic fields. Susceptibilities of the Mn-doped samples are much higher than those of MnO₂, Mn₂O₃ oxides, and Mn metals. These results show that the oxides have potential to be magnetic semiconductors.