Borylene complexes (BH)L2 and nitrogen cation complexes (N+)L2: isoelectronic homologues of carbones CL2

Quantum chemical calculations using DFT (BP86, M05-2X) and ab initio methods (CCSD(T), SCS-MP2) have been carried out on the borylene complexes (BH)L(2) and nitrogen cation complexes (N(+))L(2) with the ligands L=CO, N(2), PPh(3), NHC(Me), CAAC, and CAAC(model). The results are compared with those obtained for the isoelectronic carbones CL(2). The geometries and bond dissociation energies of the ligands, the proton affinities, and adducts with the Lewis acids BH(3) and AuCl were calculated. The nature of the bonding has been analyzed with charge and energy partitioning methods. The calculated borylene complexes (BH)L(2) have trigonal planar coordinated boron atoms which possess rather short B-L bonds. The calculated bond dissociation energies (BDEs) of the ligands for complexes where L is a carbene (NHC or CAAC) are very large (D(e) =141.6-177.3 kcal mol(-1)) which suggest that such species might become isolated in a condensed phase. The borylene complexes (BH)(PPh(3))(2) and (BH)(CO)(2) have intermediate bond strengths (D(e) =90.1 and 92.6 kcal mol(-1)). Substituted homologues with bulky groups at boron which protect the boron atom from electrophilic attack might also be stable enough to become isolated. The BDE of (BH)(N(2))(2) is much smaller (D(e) =31.9 kcal mol(-1)), but could become observable in a low-temperature matrix. The proton affinities of the borylene complexes are very large, particularly for the bulky adducts with L=PPh(3), NHC(Me), CAAC(model) and CAAC and thus, they are superbases. All (BH)L(2) molecules bind strongly AuCl either η(1) (L=N(2), PPh(3), NHC(Me), CAAC) or η(2) (L=CO, CAAC(model)). The BDEs of H(3)B-(BH)L(2) adducts which possess a hitherto unknown boron→boron donor-acceptor bond are smaller than for the AuCl complexes. The strongest bonded BH(3) adduct that might be isolable is (BH)(PPh(3))(2)-BH(3) (D(e) =36.2 kcal mol(-1)). The analysis of the bonding situation reveals that (BH)-L(2) bonding comes mainly from the orbital interactions which has three major contributions, that is, the donation from the symmetric (σ) and antisymmetric (π(||)) combination of the ligand lone-pair orbitals into the vacant MOs of BH L→(BH)←L and the L←(BH)→L π backdonation from the boron lone-pair orbital. The nitrogen cation complexes (N(+))L(2) have strongly bent L-N-L geometries, in which the calculated bending angle varies between 113.9° (L=N(2)) and 146.9° (L=CAAC). The BDEs for (N(+))L(2) are much larger than those of the borylene complexes. The carbene ligands NHC and CAAC but also the phosphane ligands PPh(3) bind very strongly between D(e) =358.4 kcal mol(-1) (L=PPh(3)) and D(e) =412.5 kcal mol(-1) (L=CAAC(model)). The proton affinities (PA) of (N(+))L(2) are much smaller and they bind AuCl and BH(3) less strongly compared with (BH)L(2). However, the PAs (N(+))L(2) for complexes with bulky ligands L are still between 139.9 kcal mol(-1) (L=CAAC(model)) and 168.5 kcal mol(-1) (L=CAAC). The analysis of the (N(+))-L(2) bonding situation reveals that the binding interactions come mainly from the L→(N(+))←L donation while L←(N(+) )→L π backdonation is rather weak.     

Reduction of sterically hindered β-diketiminato europium(III) complexes by the β-diketiminato anion: a convenient route for the synthesis of β-diketiminato europium(II) complexes

The metathesis reaction of anhydrous EuCl(3) with sodium salt of bulky β-diketiminato NaL (L = [N(2, 4, 6- Me(3)C(6)H(2))C(Me)](2)CH(-), L(2, 4, 6-Me3); [N(2,6-(i)Pr(2)C(6)H(3))C(Me)](2)CH(-), L(2, 6-ipr2) and [(2, 6-(i)Pr(2)C(6)H(3))NC(Me)CHC(Me)N(C(6)H(5))](-), L(2, 6-ipr2)(Ph)) in THF at 60 °C afforded the corresponding Eu(II) complexes: Eu(II)(L(2, 4, 6-Me3))(2)(THF) (1), Eu(II)(L(2, 6-ipr2))(2) (2) and Eu(II)(L(2, 6-ipr2)(Ph))(2) (5) with the formations of dimers (L(2, 4, 6-Me3))(2) (3) and (L(2, 6-ipr2))(2) (4) for the former two reactions and proligand L(2, 6-ipr2)(Ph)H (6) for the latter one. Compounds 1-6 were confirmed by an X-ray crystal structure analysis. The central metal Eu(II) in 1 is coordinated by two monoanionic L(2, 4, 6-Me3) ligands and one THF molecule in a trigonal bipyramid. The Eu(II) in each of 2 and 5 is ligated by two monoanionic ligands to form a tetrahedral geometry. The BVS (Bond Valence Sum) calculation indicates the oxidation state of Eu in all the three complexes is 2+ (2.12 for 1, 1.86 for 2 and 1.99 for 5). The isolation of dimers of (L(2, 4, 6-Me3))(2) and L(2, 6-ipr2))(2) and proligand L(2, 6-ipr2)(Ph)H demonstrates that the reducing agent in the present reduction of a Eu(III) ion to a Eu(II) ion might be the (L(2, 4, 6-Me3))(-), (L(2, 6-ipr2))(-) and (L(2, 6-ipr2)(Ph))(-), respectively. The possible mechanism for the reduction pathway is presented.     

Complexation to Fe(II), Ni(II), and Zn(II) of multidentate ligands resulting from condensation of 2-pyridinecarboxaldehyde with alpha,omega-triamines: selective imidazolidine/hexahydropyrimidine ring opening revisited

The condensation reaction between 2-pyridinecarboxaldehyde and diethylenetriamine, 3-[(2-aminoethyl)amino]propylamine, and 3,3'-iminobis(propylamine) in a 2:1 molar ratio yields ligands that may be isolated exclusively in the dissymmetric (cyclic) isomeric forms L(A), L(B)/L(B*), and L(C). The template effect of a metal center (Fe(II), Ni(II), and Zn(II)) results in the ring opening of L(C) including one hexahydropyrimidine ring and one (long) propylene bridge. The resulting symmetric bis-Schiff base isomeric form L(C') is stabilized through pentacoordination, yielding [Fe(II)L(C')(NCS)](NCS) (3), [Ni(II)L(C')(NCS)](NCS) (6), and [Zn(II)L(C')(NCS)](NCS) (9). The same metal centers are too bulky to exert a template effect on L(A) including one imidazolidine ring and one (short) ethylene bridge. L(A) acts as a tetradentate ligand yielding [Fe(II)L(A)(NCS)2] (1), [Ni(II)L(A)(NCS)2] (4), and [Zn(II)L(A)(NCS)2] (7). The template effect of the metal center is selective toward the ligand L(B)/L(B*) including a hexahydropyrimidine (imidazolidine) ring and the shorter ethylene (longer propylene) bridge. The Fe(II) cation is small enough to exert a template effect, resulting in the ring opening of L(B)/L(B*). The resulting bis-Schiff base L(B') is stabilized through pentacoordination, yielding [Fe(II)L(B')(NCS)](NCS) (2). Ni(II) is too bulky to promote the ring opening of L(B)/L(B*): L(B) acts as a tetradentate ligand, yielding [Ni(II)L(B)(NCS)2] (5) (the L(B*) isomer is totally converted to L(B)). The coordinative requirements and stereochemical preference of the bulkier Zn(II) cation allow neither the ring opening of L(B)/L(B*) nor the tetracoordination of L(B) or L(B*) but stabilize the novel tetradentate dissymmetric form L(B degrees) in [Zn(II)L(B degrees)(NCS)2].H2O (8) (L(B degrees) results from MeOH addition across the imine bond of L(B)). Density functional theory calculations performed for Ni(II) and Zn(II) complexes of the L(B)/L(B*)/L(B degrees) set of ligands allowed one to compare the relative stabilities of all possible isomers, showing that the most stable ones correspond to those experimentally obtained: isomerization, or methanol addition across the imine bond, of the tetradentate ligand depends on the relative stabilities of all possible isomeric complexes.     

Cooperativity between metal ions in the cleavage of phosphate diesters and RNA by dinuclear Zn(II) catalysts

A series of ligands containing linked 1,4,7-triazacyclononane macrocycles are studied for the preparation of dinuclear Zn(II) complexes including 1,3-bis(1,4,7-triazacyclonon-1-yl)-2-hydroxypropane (L2OH), 1,5-bis(1,4,7-triazacyclonon-1-yl)pentane (L3), 2,9-bis(1-methyl-1,4,7-triazacyclonon-1-yl)-1,10-phenanthroline (L4), and alpha,alpha'-bis(1,4,7-triazacyclonon-1-yl)-m-xylene (L5). The titration of these ligands with Zn(NO(3))(2) was monitored by (1)H NMR. Each ligand was found to bind two Zn(II) ions with a very high affinity at near neutral pH under conditions of millimolar ligand and 2 equiv of Zn(NO(3))(2). In contrast, a stable mononuclear complex was formed in solutions containing 5.0 mM L2OH and 1 equiv of Zn(NO(3))(2). (1)H and (13)C NMR spectral data are consistent with formation of a highly symmetric mononuclear complex Zn(L2OH) in which a Zn(II) ion is sandwiched between two triazacyclononane units. The second-order rate constant k(Zn) for the cleavage of 2-hydroxypropyl-4-nitrophenyl phosphate (HPNP) at pH 7.6 and 25 degrees C catalyzed by Zn(2)(L2O) is 120-fold larger than that for the reaction catalyzed by the closely related mononuclear complex Zn(L1) (L1 = 1,4,7-triazacyclononane). By comparison, the observation that the values of k(Zn) determined under similar reaction conditions for cleavage of HPNP catalyzed by the other Zn(II) dinuclear complexes are only 3-5-fold larger than values of k(Zn) for catalysis by Zn(L1) provides strong evidence that the two Zn(II) cations in Zn(2)(L2O) act cooperatively in the stabilization of the transition state for cleavage of HPNP. The extent of cleavage of an oligoribonucleotide by Zn(L1), Zn(2)(L5), and Zn(2)(L2O) at pH 7.5 and 37 degrees C after 24 h incubation is 4,10, and 90%. The rationale for the observed differences in catalytic activity of these dinuclear Zn(II) complexes is discussed in terms of the mechanism of RNA cleavage and the structure and speciation of these complexes in solution.     

cis-[Pt(depe)(NCS)(SCN))]和cis-[Pt(dPr'pe)(NCS)]配合物的合成和分子结构

本文研究了在1:1丙酮-水混合溶剂中回流条件下, cis-[Pt(diphos)Cl2]与NaCNS之间的取代反应, 第一次合成了CNS的混合键合异构体的depe铂配合物cis-[Pt(depe)(NCS)(SCN)], 进行了分子结构测定, 属单斜晶系, 空间群为P21/n晶胞参数: a=7.296(5), b=14.434(4), c=18.042(4)A, β=95.72(8)°,V=1890.7A^, Z=4, Rf=0.0564, 在相同条件下用dPr'pe作了对照实验, 得到的是cis-[Pt(dPr'pe)(NCS)2], 属单斜晶系, 空间群为Cc, 晶胞参数, a=12.279(6),b=9.330(8), c=20.102(7)A, β=108.90(9), V=2179.0(3)A^3, Z=4,Rf=0.0419. 此外, 还从双膦烷基的空间效应和电子效应讨论了对取代反应产物的影响。     

Multidimensional molecular steric opacity function for XeCl*(B, C) formation in the oriented Xe* (³P₂, MJ = 2) + oriented CCl₃F reaction

The steric effect for the XeCl*(B, C) formations in the oriented Xe* (3P?, MJ = 2) + oriented CCl?F reaction has been observed as a function of the mutual configuration between the molecular orientation and the atomic orbital alignment in the collision frame. Molecular steric opacity functions have been determined as a function of the atomic orbital alignment (M(L)') in the collision frame. The XeCl*(B, C) channels show similar molecular steric opacity functions at M(L)' = 0 but not at |M(L)'| = 1. The large molecular alignment dependence (i.e., the reactivity of the Cl? end and the F end is comparable, but a very poor reactivity for the sideway) is recognized for the XeCl*(B, C) channels except for the XeCl*(C) channel at |M(L)'| = 1, which shows an almost isotropic molecular orientation dependence. The M(L)' selectivity is different between the XeCl*(B, C) channels. At the molecular axis direction, the XeCl*(B) channel has little M(L)' selectivity whereas the XeCl*(C) channel is significantly favorable at M(L)' = 0. On the other hand, |M(L)'| = 1 is favorable at the sideway for the XeCl*(B, C) channels.     

Conformation of 2-aminomethylpyrrolidine and 2-aminomethylpiperidine in ternary platinum(II) complexes: regulation of conformation of the diamine by the coexisting ligand

Square-planar complexes with the formula [Pt(L(2))(L(1))](X)(2) x nH(2)O, where L(1) is S-2-aminomethylpyrrolidine (S-pyrda) or 2-aminomethylpiperidine (pipda) and L(2) is diammine (X=Cl), cyclobutane-1,1-dicarboxylato (cbdca) (X=none), 2,2'-bipyridine (bpy) (X=NO(3)), or 1,10-phenanthroline (phen) (X=Cl), were prepared and the nature of the coordination of L(1) was examined by (1)H-NMR spectroscopy and X-ray crystallography. These 2-aminomethylazacycloalkane derivatives form five-membered chelate rings condensed with an azacycloalkane ring in cis- or trans-configurations. The (1)H-NMR spectrum of complexes with S-pyrda as L(1) were consistent with cis-condensed rings in an S(N) conformation with any of L(2) group. However, (1)H-NMR spectra of the complexes with pipda as L(1) indicated trans-fused successive rings for the diammine and cbdca as L(2), but spectra for bpy and phen as L(2) were consistent with a conformation having cis-fused successive rings. X-Ray crystallography data for the two complexes with pipda as L(1) and cbdca (1) and bpy (2) as L(2) confirms the different coordination behavior in the solid state.     

Phase Behavior, Structure, and Physical Properties of the Quaternary System Tetradecyldimethylamine Oxide, HCl, 1-Hexanol, and Water

The phase diagram of the ternary surfactant system tetradecyldimethylamine oxide (TDMAO)/HCl/1-hexanol/water shows with increasing cosurfactant concentration an L(1) phase, two L(alpha) phases (a vesicle phase L(alpha1) and a stacked bilayer phase L(alphah)), and an L(3) phase, which are separated by the corresponding two-phase regions L(1)/L(alpha) and L(alpha)/L(3). In this investigation, the system was studied where some of the TDMAO was substituted by the protonated TDMAO. Under these conditions, one finds for constant surfactant concentration of 100 mM TDMAO a micellar L(1) phase, an L(alpha1) phase (consisting of multilamellar vesicles), and an interesting isotropic L(1)(*) phase in the middle of the L(1)/L(alpha) two-phase region. The L(1)(*) phase exists at intermediate degrees of charging of 30-60% and for 40-120 mM TDMAO and 70-140 mM hexanol concentration. At surfactant concentrations less than 80 mM the L(1)(*)-phase borders directly on the L(1) phase. The phase transition between the L(1) phase and the L(1)(*) phase was detected by electric conductivity and rheological measurements. The conductivity values show a sharp drop at the L(1)/L(1)(*) transition, and the zero shear viscosity of the L(1)(*) phase is much lower than in L(1) phase. The form and size of the aggregates in L(1)(*) were detected with FF-TEM and SANS. This phase contains small unilamellar vesicles (SUV) of about 10 nm and some large multilamellar vesicles with diameters up to 500 nm. The system exhibits another peculiarity. For 100 mM surfactant, the clear L(alpha1)-phase exists only at chargings below 30%. With oscillating rheological measurements a parallel development of the storage modulus G' and the loss modulus G" was observed. Both moduli are frequency independent and the system possesses a yield stress. The storage modulus is a magnitude larger than the loss modulus. Copyright 2000 Academic Press.     

Study on the subgel-phase formation using an asymmetric phospholipid bilayer membrane by high-pressure fluorometry

The myristoylpalmitoylphosphatidylcholine (MPPC) bilayer membrane shows a complicated temperature-pressure phase diagram. The large portion of the lamellar gel (L(β)'), ripple gel (P(β)'), and pressure-induced gel (L(β)I) phases exist as metastable phases due to the extremely stable subgel (L(c)) phase. The stable L(c) phase enables us to examine the properties of the L(c) phase. The phases of the MPPC bilayers under atmospheric and high pressures were studied by small-angle neutron scattering (SANS) and fluorescence spectroscopy using a polarity-sensitive fluorescent probe Prodan. The SANS measurements clearly demonstrated the existence of the metastable L(β)I phase with the smallest lamellar repeat distance. From a second-derivative analysis of the fluorescence data, the line shape for the L(c) phase under high pressure was characterized by a broad peak with a minimum of ca. 460 nm. The line shapes and the minimum intensity wavelength (λ″(min)) values changed with pressure, indicating that the L(c) phase has highly pressure-sensible structure. The λ″(min) values of the L(c) phase spectra were split into ca. 430 and 500 nm in the L(β)I phase region, which corresponds to the formation of a interdigitated subgel L(c) (L(c)I) phase. Moreover, the phase transitions related to the L(c) phase were reversible transitions under high pressure. Taking into account the fluorescence behavior of Prodan for the L(c) phase, we concluded that the structure of the L(c) phase is highly probably a staggered structure, which can transform into the L(c)I phase easily.     

Adduct formation of methyltrioxorhenium with mono- and bidentate nitrogen donors: formation constants

The coordination of N-donor ligands to MTO (methyltrioxorhenium) is governed by both electronic and steric effects. For example, the binding constant of pyridine to MTO is 196.6 L mol(-)(1), whereas that of the better donor 4-picoline is 732 L mol(-)(1) and that of the sterically encumbered 2,6-di-tert-butyl-4-methylpyridine is <1 L mol(-)(1). Equilibrium constants have been evaluated for this reaction, MTO + L = MTO.L, where L comprises mono- and bidentate N-donor ligands. The values of log K for monodentate ligands range from <0 for 2-substituted pyridines to 3.3 for 1-butylimidazole and for bidentate ligands from 2.2 for 2,2'-bipyridine to 5.27 for 4,7-dimethyl-1,10-phenanthroline at 25 degrees C in chloroform. A successful correlation of log K with pK(a) of L was realized except in the case of 2-substituted ligands, where steric effects make K smaller than expected from the proton basicity of L.     

Copper(II) coordination chemistry of westiellamide and its imidazole, oxazole, and thiazole analogues

The copper(II) coordination chemistry of westiellamide (H(3)L(wa)), as well as of three synthetic analogues with an [18]azacrown-6 macrocyclic structure but with three imidazole (H(3)L(1)), oxazole (H(3)L(2)), and thiazole (H(3)L(3)) rings instead of oxazoline, is reported. As in the larger patellamide rings, the N(heterocycle)-N(peptide)-N(heterocycle) binding site is highly preorganized for copper(II) coordination. In contrast to earlier reports, the macrocyclic peptides have been found to form stable mono- and dinuclear copper(II) complexes. The coordination of copper(II) has been monitored by high-resolution electrospray mass spectrometry (ESI-MS), spectrophotometric and polarimetric titrations, and EPR and IR spectroscopies, and the structural assignments have been supported by time-dependent studies (UV/Vis/NIR, ESI-MS, and EPR) of the complexation reaction of copper(II) with H(3)L(1). Density functional theory (DFT) calculations have been used to model the structures of the copper(II) complexes on the basis of their spectroscopic data. The copper(II) ion has a distorted square-pyramidal geometry with one or two coordinated solvent molecules (CH(3)OH) in the mononuclear copper(II) cyclic peptide complexes, but the coordination sphere in [Cu(H(2)L(wa))(OHCH(3))](+) differs from those in the synthetic analogues, [Cu(H(2)L)(OHCH(3))(2)](+) (L = L(1), L(2), L(3)). Dinuclear copper(II) complexes ([Cu(II) (2)(HL)(mu-X)](+); X = OCH(3), OH; L = L(1), L(2), L(3), L(wa)) are observed in the mass spectra. While a dipole-dipole coupled EPR spectrum is observed for the dinuclear copper(II) complex of H(3)L(3), the corresponding complexes with H(3)L (L = L(1), L(2), L(wa)) are EPR-silent. This may be explained in terms of strong antiferromagnetic coupling (H(3)L(1)) and/or a low concentration of the dicopper(II) complexes (H(3)L(wa), H(3)L(2)), in agreement with the mass spectrometric observations.     

New fluorescent chemosensors for heavy metal ions based on functionalized pendant arm derivatives of 7-anthracenylmethyl-1,4,10-trioxa-7,13-diazacyclopentadecane

Two new ligands 7-anthracenylmethyl-13-methylpyridyl-1,4,10-trioxa-7,13-diazacyclopentadecane (L4) and 7-anthracenylmethyl-13-(2,2-dimethyl-2-hydroxyethyl)-1,4,10-trioxa-7,13-diazacyclopentadecane (L(5)) have been synthesized and characterized. Both derive from 7-anthracenylmethyl-1,4,10-trioxa-7,13-diazacyclopentadecane (L(3)) and differ for having a differently functionalized pendant arm covalently attached to the remaining secondary nitrogen donor of the macrocyclic framework. The protonation and coordination behavior of L(4), L(5), and the unbranched L(3) with metal ions have been studied in MeCN/H2O (1:1 v/v, 298.1 K, I = 0.1 M) using potentiometric methods. The crystal structures of L(3), [(H2L(3))(HL(3))](ClO4)3, and the complex [CdL(3)(NO3)2] have been determined by single-crystal X-ray methods. The fluorescent behavior of L(3)-L(5) in the presence of Cu(II), Zn(II), Cd(II), Hg(II), and Pb(II) has been studied as a function of pH in MeCN/H2O (1:1 v/v). The presence of Cu(II), Hg(II), or Pb(II) does not affect the fluorescent behavior observed for the three free ligands upon changing the pH. Interestingly, the fluorescent emission of L(3) and L(5) is selectively enhanced only in the presence of Cd(II) at basic pH. The same effect is observed for L4 in the presence of Cd(II) or Zn(II) at about pH 7.     

Extraction of sodium and potassium picrates with 15-(2,5-dioxahexyl)-15-methyl-16-crown-5 (lariat 16C5) into various organic solvents. Elucidation of fundamental equilibria which determine the extraction ability for Na(+) and K(+) and the selectivity

To quantitatively elucidate the effects of the side chains and diluents on the extraction selectivity for sodium and potassium picrates of 15-(2,5-dioxahexyl)-15-methyl-16-crown-5 (L16C5) from the viewpoint of equilibrium, the constants for the overall extraction (K(ex)), the partition for various diluents of low dielectric constants (K(D,MLA)), and the aqueous ion-pair formation (K(MLA)) of L16C5-sodium and -potassium picrate 1:1:1 complexes were determined at 25 degrees C; the distribution constants of L16C5 were also measured at 25 degrees C. The log K(MLA) values for Na(+) and K(+) are 2.74+/-0.29 and 1.70+/-0.36, respectively. In going from 16-crown-5 (16C5) to L16C5, the side chains decrease the K(MLA) value, but do not increase the difference in K(MLA) between Na(+) and K(+). The distribution behavior of L16C5 and its 1:1:1 complexes with the alkali metal picrates closely obeys regular solution theory, except for chloroform. Molar volumes and solubility parameters of L16C5 and the 1:1:1 complexes were determined. The magnitude of K(ex) is mainly governed by the K(M(L16C5)A) value. For every diluent, L16C5 shows Na(+) extraction selectivity over K(+). The Na(+) extraction selectivity of L16C5 is determined completely by K(M(L16C5)A). The extraction ability and selectivity for sodium and potassium picrates by L16C5 are compared with those of 16C5 on the basis of the fundamental equilibrium constants.     

嵌段共聚物L64在1-丁基-3-甲基咪唑四氟硼酸盐离子液体中形成的层状液晶

利用偏光显微镜(POM)、小角X射线散射(SAXS)及傅里叶变换红外(FTIR)光谱技术研究了嵌段共聚物PluronicL64(PEO13PPO30PEO13)(PEO:聚氧乙烯;PPO:聚氧丙烯)在室温离子液体1-丁基-3-甲基咪唑四氟硼酸盐[Bmim][BF4]中的聚集行为.绘制了L64/[Bmim][BF4]体系的相图,当L64浓度介于40%-65%(w,质量分数)之间时,L64可与[Bmim][BF4]形成层状液晶.SAXS结果表明,液晶层间距随L64浓度的增加而降低.温度对液晶微结构影响较大,液晶层间距随温度的升高而增大,极性头截面积则减小.并且,在一定温度范围内,升温可使体系的有序性增强.但是,随温度的进一步升高,[Bmim][BF4]与PEO链段之间的氢键被破坏,双折射现象消失,液晶有序性降低.此外,分析了层状液晶的形成机理,[Bmim][BF4]与L64分子间的氢键作用力、静电作用力以及疏溶剂力是液晶形成的驱动力.     

Theoretical study on the mechanism of Ni-catalyzed alkyl-alkyl Suzuki cross-coupling

Ni-catalyzed cross-coupling of unactivated secondary alkyl halides with alkylboranes provides an efficient way to construct alkyl-alkyl bonds. The mechanism of this reaction with the Ni/L1 (L1=trans-N,N'-dimethyl-1,2-cyclohexanediamine) system was examined for the first time by using theoretical calculations. The feasible mechanism was found to involve a Ni(I)-Ni(III) catalytic cycle with three main steps: transmetalation of [Ni(I)(L1)X] (X=Cl, Br) with 9-borabicyclo[3.3.1]nonane (9-BBN)R(1) to produce [Ni(I)(L1)(R(1))], oxidative addition of R(2) X with [Ni(I)(L1)(R(1))] to produce [Ni(III)(L1)(R(1))(R(2))X] through a radical pathway, and C-C reductive elimination to generate the product and [Ni(I)(L1)X]. The transmetalation step is rate-determining for both primary and secondary alkyl bromides. KOiBu decreases the activation barrier of the transmetalation step by forming a potassium alkyl boronate salt with alkyl borane. Tertiary alkyl halides are not reactive because the activation barrier of reductive elimination is too high (+34.7 kcal mol(-1)). On the other hand, the cross-coupling of alkyl chlorides can be catalyzed by Ni/L2 (L2=trans-N,N'-dimethyl-1,2-diphenylethane-1,2-diamine) because the activation barrier of transmetalation with L2 is lower than that with L1. Importantly, the Ni(0)-Ni(II) catalytic cycle is not favored in the present systems because reductive elimination from both singlet and triplet [Ni(II)(L1)(R(1))(R(2))] is very difficult.     

An electrochemical and DFT study on selected beta-diketiminato metal complexes

Selected homoleptic metal beta-diketiminates M(I)L and M(II)L2 [M(I) = Li or K, M(II) = Mg, Ca or Yb; L: L(Ph) = [N(SiMe3)C(Ph)]2CH, L(Bu(t)) = N(SiMe3)C(Ph)C(H)C(Bu(t))N(SiMe3), L* = [N(C6H3Pr(i)2-2,6)C(Me)]2CH] have been studied by cyclic voltammetry (CV). The primary reduction (E(p)red, the peak reduction potential measured vs. SCE in thf containing 0.2 M [NBu4][PF6] with a scan rate 100 mV s(-1) at a vitreous carbon electrode at ambient temperature) is essentially ligand-centred: E(p)red being ca. -2.2 V (LiL(Ph) and KL(Ph)) and -2.4 V [Mg(L(Ph))2, LiL(Bu(t)) and Ca(L(Ph))2], while LiL* is significantly more resistant to reduction (E(p)red = -3.1 V). These observations are consistent with the view that the two (L(Ph)) or single (L(Bu(t))) C-phenyl substituent(s), respectively, are available for -electron-delocalisation of the reduced species, whereas the N-aryl substituents of L* are unable to participate in such conjugation for steric reasons. The primary reduction process was reversible on the CV-time scale only for LiL(Bu(t)), Ca(L(Ph))2 and Yb(L(Ph))2. For the latter this occurs at a potential ca. 500 mV positive of Ca(L(Ph))2, consistent with the notion that the LUMO of Yb(L(Ph))2 has substantial metal character. The successive reversible steps, each separated by ca. 500 mV, indicate that there is strong electronic communication between the two ligands of Yb(L(Ph))2. The overall three-electron transfer sequence shows that the final reduction level corresponds to [Yb(II)(L(Ph))2-(L(Ph))3-]. DFT calculations on complexes Li(L(Ph))(OMe2)2 and Li2(L(Ph))(OMe2)3 showed that both HOMO and LUMO orbitals are only based on the ligand with a HOMO-LUMO gap of 4.21 eV. Similar calculations on a doubly reduced complex Yb[(mu-L(Ph))Li(OMe2)]2 demonstrated that there is a considerable Yb atomic orbital contribution to the HOMO and LUMO of the complex.     

四磺化酞菁钴轴向配位反应研究

采用分光光度法研究了四磺化酞菁钴(CoTSPc)与配体L(L=en,NH₃,CN^-)的配位反应,研究了配位反应动力学,测定了配合物的稳定常数K,并讨论了配位反应机理。研究表明:CoTSPc与L形成CoTSPc(L)₂的配合物,动力学方程为:-dC_M/dt=kC_MC_Lⁿ,C_M、C_L分别为CoTSPc的单体和配体的浓度(en:n=1;NH₃,CN^-:n=2);CoTSPc(L)₂的稳定常数为:L=en,lgK=4.639;L=NH₃,lgK=5.328;L=CN^-,lgK=9.116.     

Laser photolysis studies of the photochemical reactions of chromium(III) octaethylporphyrin and tetramesitylporphyrin complexes in toluene solution

A nanosecond laser photolysis study was carried out for the Cr(III) porphyrin complexes of 2,3,7,8,12,13,17,18-octaethylporphyrin, [Cr(OEP)(Cl)(L)], and of 5,10,15,20-tetramesitylporphyrin, [Cr(TMP)(Cl)(L)], in toluene containing water and an excess amount of L (L = axial ligand). The laser photolysis generates the triplet excited state of the parent complex as well as a five-coordinate complex, [Cr(porphyrin)(Cl)], produced by the photodissociation of the axial ligand L. The yields for the formation of the triplet state and the photodissociation of L are found to markedly depend on the nature of both L and porphyrin ligand. The five-coordinate [Cr(porphyrin)(Cl)] readily reacts with both H(2)O and L in the bulk solution to give [Cr(porphyrin)(Cl)(H(2)O)] and [Cr(porphyrin)(Cl)(L)], respectively. The axial H(2)O ligand in [Cr(porphyrin)(Cl)(H(2)O)] is then substituted by the ligand L to regenerate the original complex [Cr(porphyrin)(Cl)(L)]. In principle, the substitution reaction takes place by the dissociative mechanism: the first step is the dissociation of H(2)O from [Cr(porphyrin)(Cl)(H(2)O)], followed by the reaction of the five-coordinate [Cr(porphyrin)(Cl)] with the ligand L to regenerate [Cr(porphyrin)(Cl)(L)]. The rate constants for this ligand substitution reaction are found to exhibit bell-shaped ligand concentration dependence. The detailed kinetic analysis revealed that both ligands L and H(2)O in toluene make a hydrogen bond with the axial H(2)O ligand in [Cr(porphyrin)(Cl)(H(2)O)] to yield dead-end complexes for the substitution reaction. The reaction mechanisms are discussed on the basis of the substituent effects of the porphyrin peripheral groups and the kinetic parameters determined from the temperature dependence of the rate constants.     

Reactivity of RuCl(2)(CO)(P(t)()Bu(2)Me)(2) toward H(2) and Brønsted Acids: Aggregation Triggered by Protonation and Phosphine Loss

Reaction of H(2) with RuCl(2)(CO)L(2) (L = P(t)()Bu(2)Me) in benzene forms RuHCl(CO)L(2) and HCl. The latter reacts with RuCl(2)(CO)L(2) to give [LH][Ru(2)Cl(5)(CO)(2)L(2)] and [LH]Cl. The Ru(2)Cl(5)(CO)(2)L(2)(-) ion is detected (NMR) as several isomers, and is shown by X-ray diffraction to have a face-shared bioctahedral structure: LCl(OC)Ru(&mgr;-Cl)(3)Ru(CO)ClL(-). The loss of phosphine from Ru(II) is triggered by electrophilic attack, but not directly on P or on the Ru-P bond. It is shown (low-temperature NMR studies) that HCl reacts with RuHCl(CO)L(2) to give initially RuCl(2)(H(2))(CO)L(2), in which H(2) is trans to Cl. From this study, and also direct observation of the reaction of HCl with RuCl(2)(CO)L(2) to produce Ru(2)Cl(5)(CO)(2)L(2)(-), the Br?nsted basicity of chloride in RuCl(2)(CO)L(2) is established. This accounts for its reaction with PhC(2)H and NEt(3) to give Ru(C(2)Ph)Cl(CO)L(2). Crystallographic data (-173 degrees C) for [P(t)()Bu(2)MeH][Ru(2)Cl(5)(CO)(2)(P(t)()Bu(2)Me)(2)]: a = 16.418(2)?, b = 12.578(2)?, c = 20.044(3)?, beta = 103.38(1) degrees with Z = 4 in space group P2(1)/a.     

Plutonium(IV) sequestration: structural and thermodynamic evaluation of the extraordinarily stable cerium(IV) hydroxypyridinonate complexes

Ligands containing the 1-methyl-3-hydroxy-2(1H)-pyridinone group (Me-3,2-HOPO) are powerful plutonium(IV) sequestering agents. The Ce(IV) complexes of bidentate and tetradentate HOPO ligands have been quantitatively studied as models for this sequestration. The complexes Ce(L1)4, Ce(L2)4, Ce(L3)2, and Ce(L4)2 (L1 = Me-3,2-HOPO; L2 = PR-Me-3,2-HOPO; L3 = 5LI-Me-3,2-HOPO; L4 = 5LIO-Me-3,2-HOPO) were prepared in THF solution from Ce(acac)4 and the corresponding ligand. The complex Ce(L4)2 was also prepared in aqueous solution by air oxidation of the Ce(III) complex [Ce(L4)2]-. Single-crystal X-ray diffraction analyses are reported for Ce(L1)(4)x2CHCl3 [P1 (no. 2), Z = 2, a = 9.2604(2) A, b = 12.1992(2) A, c = 15.9400(2) A, alpha = 73.732(1) degrees, beta = 85.041(1) degrees, gamma = 74.454(1) degrees], Ce(L3)2x2CH3OH [P2(1)/c (no. 14), Z = 4, a = 11.7002(2) A, b = 23.0033(4) A, c = 15.7155(2) A, beta = 96.149(1) degrees], Ce(L4)(2).2CH3OH [P1 (no. 2), Z = 2, a = 11.4347(2) A, b = 13.8008(2) A, c = 15.2844(3) A, alpha = 101.554(1) degrees, beta = 105.691(1) degrees, gamma = 106.746(1) degrees], and Ce(L4)2x4H2O [P2(1)/c (no. 14), Z = 4, a = 11.8782(1) A, b = 22.6860(3) A, c = 15.2638(1) A, beta = 96.956(1) degrees]. A new criterion, the shape measure S, has been introduced to describe and compare the geometry of such complexes. It is defined as [formula: see text], where m is the number of edges, delta i is the observed dihedral angle along the ith edge of delta (angle between normals of adjacent faces), theta i is the same angle of the corresponding ideal polytopal shape theta, and min is the minimum of all possible values. For these complexes the shape measure shows that the coordination geometry is strongly influenced by small changes in the ligand backbone or solvent. Solution thermodynamic studies determined overall formation constants (log beta) for Ce(L2)4, Ce(L3)2, and Ce(L4)2 of 40.9, 41.9, and 41.6, respectively. A thermodynamic cycle has been used to calculate these values from the corresponding formation constants of Ce(III) complexes and standard electrode potentials. From the formation constants and from the protonation constants of the ligands, extraordinarily high pM values for Ce(IV) are generated by these tetradentate ligands (37.5 for Ce(L3)2 and 37.0 for Ce(L4)2). The corresponding constants for Pu(IV) are expected to be substantially the same.