dl‐Aspartic Acid‐Mediated Hydrothermal Synthesis of β‐ZnS Microspheres and Their Optical Properties

ZnS hollow microspheres were synthesized by a dl ‐aspartic acid mediated hydrothermal route. dl ‐aspartic acid plays an important role as crystal growth soft template, which regulates the release of Zn²⁺ ions for the formation of ZnS hollow spheres. The formation of these hollow spheres was mainly attributed to an Ostwald ripening process. The products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), electron diffraction (ED), UV/Vis spectroscopy (UV), and photoluminescence (PL). The shells of the microspheres were composed of ZnS quantum dots (QDs) with the average size of 2.31 nm. The average microspheres diameter is 0.5–3.5 μm. The shell thickness of the hollow sphere is ≈?300 nm. The optical bandgap energy increased significantly compared to the bulk ZnS material due to the strong quantum confinement effect. Two strong emissions at ≈?425 nm and ≈?472 nm in the photoluminescence (PL) spectrum of ZnS hollow microspheres indicate strong quantum confinement because of the presence of QDs.     

PAMAM树形分子为模板低温制备纳米硫化锌空心球

Hollow ZnS spheres have been prepared in the presence of generation 3.5 poly (amidoamine) dendrimers with surface ester groups (G3.5-COOCH3 PAMAM dendrimer) as synthetic matrix template. The products obtained were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-Vis absorption. TEM studies show that the hollow spheres with diameters ranging from 80 to 100 nm are prepared. The range of wall thickness was estimated to be about 20～30 nm. It was found that the concentration of PAMAM dendrimer had a significant influence on the formation of hollow ZnS spheres. The possible formation mechanism of the hollow spherical structure is also discussed.     

三元添加剂水溶液体系合成亚微米硫化锌空心球

利用仿生合成方法,通过加入一定量的引发剂使甲基丙烯酸原位聚合,在聚乙二醇(PEG)、聚甲基丙烯酸(PMAA)和十二烷基硫酸钠(SDS)的三元添加剂混合溶液体系中控制了合成硫化锌晶体,提出了一种简单易行的合成硫化锌空心球的新方法.采用透射电子显微镜(TEM)、扫描电子显微镜(SEM)、X射线粉末衍射(XRD)及紫外吸收光谱等手段对合成样品的形貌、结构及性能进行了表征.TEM结果显示,ZnS空心球的直径约为300～400nm,其壳层的厚度约为50nm.SEM结果显示,空心球的外壳是由初级纳米粒子定向熔合排列形成的蠕虫状结构紧密组装而成.由于相应的胶束结构的改变,表面活性剂SDS浓度的变化明显改变了ZnS产物的形貌,在较高浓度的SDS溶液中得到了ZnS片状晶体的球形聚集体.利用核-壳机理初步解释了空心球结构的形成过程.     

溶剂热方法合成Cu2ZnSnS4空心球

以氯化亚铜,硝酸锌,氯化锡和硫脲作为反应前驱体,聚乙二醇作为模板,利用溶剂热方法合成Cu₂ZnSnS₄中空球。其中,聚乙二醇对于产物的最终形成起到关键作用。文章讨论了Cu₂ZnSnS₄中空球的生长机制,并通过X射线衍射(XRD)、拉曼光谱、场发射电子显微镜(FESEM)、透射电子显微镜(TEM)、X射线能量色散谱(EDX)、X射线光电子谱(XPS)、选区电子衍射谱(SAED)和紫外-可见光分光光度计(UV-Vis)等技术对样品的微结构以及光学性质进行了表征和分析。结果显示Cu₂ZnSnS₄中空球为四方晶体,尺寸为600 nm。其禁带宽度为1.52 eV,适用于制作光伏器件。     

Novel one-step route for synthesizing CdS/polystyrene nanocomposite hollow spheres

CdS/polystyrene nanocomposite hollow spheres with diameters between 240 and 500 nm were synthesized under ambient conditions by a novel microemulsion method in which the polymerization of styrene and the formation of CdS nanoparticles were initiated by gamma-irradiation. The product was characterized by transmission electron microscopy (TEM), field-emission scanning electron microscopy (FESEM), X-ray powder diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA), which show the walls of the hollow spheres are porous and composed of polystyrene containing homogeneously dispersed CdS nanoparticles. The quantum-confined effect of the CdS/polystyrene nanocomposite hollow spheres is confirmed by the ultraviolet-visible (UV-vis) and photoluminescent (PL) spectra. We propose that the walls of these nanocomposite hollow spheres originate from the simultaneous synthesis of polystyrene and CdS nanoparticles at the interface of microemulsion droplets. This novel method is expected to produce various inorganic/polymer nanocomposite hollow spheres with potential applications in the fields of materials science and biotechnology.     

溶剂热方法合成Cu2ZnSnS4空心球

以氯化亚铜,硝酸锌,氯化锡和硫脲作为反应前驱体,聚乙二醇作为模板,利用溶剂热方法合成Cu₂ZnSnS₄中空球。其中,聚乙二醇对于产物的最终形成起到关键作用。文章讨论了Cu₂ZnSnS₄中空球的生长机制,并通过X射线衍射(XRD)、拉曼光谱、场发射电子显微镜(FESEM)、透射电子显微镜(TEM)、X射线能量色散谱(EDX)、X射线光电子谱(XPS)、选区电子衍射谱(SAED)和紫外-可见光分光光度计(UV-Vis)等技术对样品的微结构以及光学性质进行了表征和分析。结果显示Cu₂ZnSnS₄中空球为四方晶体,尺寸为600 nm。其禁带宽度为1.52 eV,适用于制作光伏器件。     

One-pot synthesis of ZnS/polymer composites in supercritical CO2-ethanol solution and their applications in degradation of dyes

A facile method to decorate the polymeric hollow spheres with ZnS nanoparticles has been presented. In this method, the precursors, Zn(Ac)(2)H(2)O and CH(3)CSNH(2), were first adsorbed by the polymer substrate in supercritical CO(2)-ethanol solution at 35 degrees C. Followed by heating the mixture at 100 degrees C for 2 h, ZnS/polymer composites were obtained. The as-produced ZnS/polymer composites were characterized by means of IR spectra, X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy. It was demonstrated that crystalline ZnS nanoparticles with size of 3-5 nm were uniformly decorated on the polymer spheres under suitable conditions. The resultant ZnS/polymer composites exhibited high efficiency for degrading eosin B, methyl orange and methylene blue under UV light irradiation.     

Sonochemical synthesis of hollow PbS nanospheres

PbS hollow nanospheres with diameters of 80-250 nm have been synthesized by a surfactant-assisted sonochemical route. The nanostructures were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), (high-resolution) transmission electron microscopy [(HR)TEM], and scanning electron microscopy (SEM) images. Structural characterization indicates that shells of the hollow spheres are composed of PbS nanoparticles with diameters of about 12 nm. The formation of the hollow nanostructure was explained by a vesicle-template mechanism, in which sonication and surfactant play important roles. Furthermore, uniform silica layers were successfully coated onto the hollow spheres via a modified St?ber method to enhance their performance for promising applications.     

硫化锌纳米空心球：合成及光学性质研究

Cubic ZnS hollow nanospheres have been prepared by a simple and template-free solvothermal method. The reaction was accomplished between Zn powder and the in-situ prepared S8. The results of X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) show that the ZnS hollow spheres are composed of ultrafine nanoparticles. The average diameters of the hollow nanospheres are about 100 nm. Their photoluminescence (PL) spectra indicate that they have excellent optical properties.     

InOOH hollow spheres synthesized by a simple hydrothermal reaction

Novel micrometer-sized indium oxyhydroxide (InOOH) hollow spheres were successfully synthesized via a citric acid (CA) assisted hydrothermal process. The morphology, crystal structure, and optical properties of the product were characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, and UV-vis diffuse reflectance spectroscopy (DRS). The optical band gap, E(g), was estimated to be 3.5 eV from the DRS spectrum, which is almost equal to that of indium oxide. Furthermore, on the basis of a series of SEM observations, phenomenological elucidation of a mechanism for the growth of the InOOH hollow spheres has been presented; key factors for the formation of the structures have been proposed.     

Synthesis, characterization, and optical properties of well-defined N-doped, hollow silica/titania hybrid microspheres

Well-defined nitrogen-doped, hollow SiO2/TiO2 hybrid spheres were successfully prepared through a two-step sol-gel synthesis combined calcination process using triethylamine as the nitrogen source. In this approach, polystyrene (PS)/silica microspheres were first synthesized. Subsequently, the amine-treated PS/SiO2/TiO2 hybrid spheres were obtained by sol-gel method. Finally, the elimination of the PS core, nitrogen-doping process, and crystallization of amorphous TiO2 were simultaneously conducted in the calcination process to acquire the final products. The as-prepared hybrid spheres were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectroscopy. The results of XRD, FTIR, and XPS spectra indicated that nitrogen was really doped into the anatase TiO2 shell and confirmed that most nitrogen dopants might be present in the chemical environments of N-Ti-O and Ti-N-O. It was found that the absorption shoulder of nitrogen-doped hollow SiO2/TiO2 hybrid spheres vastly shifted to the visible region up to around 530 nm. The photoluminescence (PL) bands showed spectral lines at about 421, 472, and 529 nm, which were attributed to the self-trapped excitons, F and F+ centers. Moreover, the intensity of the PL spectra band of hollow SiO2/TiO2 hybrid spheres increased with as the amount of titanium tetrabutoxide (TBOT) precursor increased. However, the doping of nitrogen into hollow SiO2/TiO2 hybrid spheres led to the drastic quenching of photoluminescence because of the increase in the separation efficiency of the photoinduced electron and hole pairs.     

Surfactant-assistant and facile synthesis of hollow ZnS nanospheres

Small and monodisperse ZnS hollow nanospheres with outer diameter ranging from 60 to 70 nm and wall thickness of 15-20 nm were fabricated in a large scale by a simple surfactant polyethylene glycol (PEG) assisted method. The diameter and the wall thickness of the hollow nanospheres could be controlled by manipulating the amount of PEG and the aging time, respectively. Moreover, the wall of these hollow nanospheres is very compact. The product was characterized by X-ray power diffraction (XRD), transmission electron microscopy (TEM), UV-vis spectrum and fluorescence spectroscopy. The photocatalytic activity of as-prepared ZnS hollow nanospheres was also evaluated by using methyl orange (MO) as a model organic compound and the result revealed that their photocatalytic activity is a little lower than that of Degussa P25 TiO(2) but better than that of ZnS nanocrystals prepared by literature method. Furthermore, a rational mechanism to the formation and evolution of the products is proposed.     

反应性模板法合成硫化银中空球-银纳米粒子异质结构

以Cu₂S中空球为反应性模板, 通过在水溶液中与银离子的阳离子交换和氧化还原反应制备了大小均匀的Ag₂S中空球-Ag纳米粒子异质结构, 即Ag₂S-Ag异质中空球. 该异质结构中每个Ag₂S中空球的直径约为600 nm, 壁厚约20–30 nm, 其表面均附着一个Ag纳米粒子. 采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)和能量色散X射线谱(EDS)对所得Ag₂S-Ag异质中空球的结构和组成进行了表征. 若以CuS中空球为反应性模板, 在相似转化条件下则主要得到不含Ag粒子的Ag₂S中空球. 该结果表明, Cu₂S中的Cu(I)的还原性在Ag₂S-Ag异质中空球的形成中发挥了重要作用. 通过对所制备的Ag₂S-Ag异质中空球进行二次生长, 还可以得到Ag₂S中空球的半球表面均被Ag膜所包覆的Ag₂S-Ag异质中空球.     

TEM-induced structural evolution in amorphous Fe oxide nanoparticles

Exposure to the high energy electron beam of a TEM changes the morphology of amorphous Fe oxide nanoparticles from solid spheres to hollow shells. Amorphous Fe oxide nanoparticles prepared via high-temperature methods using hexadecylamine and trioctylphosphine oxide surfactants were compared to crystalline gamma-Fe2O3 particles of similar size. Both sets of particles are fully characterized via SQUID magnetometry, X-ray powder diffraction, BET surface analysis, EPR spectroscopy, high-resolution transmission electron microscopy (TEM), and electron energy loss spectroscopy (EELS). Time-resolved TEM images reveal that the amorphous Fe oxide particles evolve from solid spheres into hollow shells in <2 min, whereas crystalline gamma-Fe2O3 are unaffected by the electron beam. The resulting nanocrystalline Fe oxide shells bear striking resemblance to core-shell nanocrystals, but are a result of a morphology change attributed to restructuring of particle voids and defects induced by quasi-melting in the TEM. These results thus imply that caution is necessary when using TEM to analyze nanoparticle core-shell and heterostructured nanoparticles.     

Co3O4空心球的简易合成及其电化学性能

通过简易的水热法"一锅"制备了Co3O4空心球。借助X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和傅里叶变换红外光谱法(FTIR)等对Co3O4的结构和形貌进行了表征。结果表明,产物由Co3O4纳米粒子构成,并形成明显的空心多孔结构。循环伏安法(CV)测试表明,所制得的Co3O4空心球呈现良好的电化学性能。本文同时对Co3O4空心球结构的形成过程和可能的机理进行了分析和讨论。     

Fabrication and photocatalytic properties of SnO2 double-shelled and triple-shelled hollow spheres

SnO₂ double-shelled and triple-shelled hollow spheres were tailored by adjusting concentration of tin (IV) chloride solution during the process of the tin (IV) ions infused carbonaceous spheres. The structures of these SnO₂ multi-shelled hollow spheres were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and their possible formation mechanism were also discussed. In virtue of triple-shelled hollow porous structure and higher specific surface area, SnO₂ triple-shelled hollow spheres exhibited enhanced photocatalytic properties compared to SnO₂ double-shelled hollow spheres.     

Preparation and Characterization of Cu3V2O7(OH)2·2H2O Hollow Spheres from NazV6O16·3HzO Nanobelts

Monoclinic Cu3V2O7(OH)2·2H2O(copper polyvanadate) hollow spheres were prepared with Na2V6O16·3H2O nanobelts as V-precursor by hydrothermal method.The purity and structure of the products were characterized by X-ray powder diffraction(XRD),Fourier transform infrared(FTIR) spectroscopy,Raman spectroscopy,thermogravimetric analysis(TGA) and X-ray photoelecton spectroscopy(XPS).The morphology and size were observed by scanning electron microscopy(SEM).We found that the Kagomé staircase-structural copper polyvanadate hollow spheres with an average diameter of 7 μm could be easily synthesized via the reaction of Na2V6O16·3H2O nanobelts with sufficient copper sulfate.The dielectric property of the copper polyvanadate demonstrates that dielectric loss hardly changes when the frequency of applied electric field is higher than 100 kHz.The formation process of the hollow spheres is discussed in detail by the observation of a series of products prepared for different reaction time.     

Liposome induced self-assembly of gold nanoparticles into hollow spheres

Gold nanoparticles were prepared by the reduction of [(C7H15)4N]+ [AuCl4]- with 3,4-ethylenedioxythiophene (EDOT) as reductant in toluene solution. The employed stabilizers include 3,3'-thiodipropionic acid (TDPA), 1-dodecanethiol (DDT), (+/-)-10-camphorsulfonic acid (CSA), and 11-mercaptoundecanoic acid (MUA). The reaction processes were tracked by UV-vis and FT-IR spectroscopy, and the as-prepared gold nanoparticles were characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive spectroscopy, and X-ray photoelectron spectroscopy measurements. When TDPA and MUA, which possess both -S- and -COOH groups, were used as the stabilizer in the preparation, the as-prepared nanoparticles could self-assemble into hollow spheres. While when DDT with a -SH group or CSA with a -SO3H group was used as the protecting agents, only discrete gold nanoparticles were observed. The results show that the groups of both -S- and -COOH in the stabilizer play an important role in forming the hollow nanospheres. It is proposed that the formation mechanism of the hollow spheres is a liposome that formed between -COO- and [(C7H15)4 N]+ could act as a template to induce the self-assembly of the gold nanoparticles into the hollow spheres.     

Novel and facile method for the preparation of monodispersed titania hollow spheres

The fabrication of monodispersed hollow spheres in varying sizes and shapes is very interesting and has a lot of potential applications. This paper provides a very simple route to preparing hollow titania spheres using polystyrene (PS) as a template. In this approach, the titania shells were first formed and the PS cores were dissolved subsequently, even synchronously, in the same medium; neither an additional dissolution nor a calcination process was needed to remove the PS cores. Transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and Barret-Emmet-Teller measurements were used to characterize the monodispersed hollow titania spheres. A possible formation mechanism of the hollow spheres was proposed.     

ZnO-based hollow microspheres with mesoporous shells: Polyoxometalate-assisted fabrication, growth mechanism and photocatalytic properties

With the assistance of Keggin-type polyoxometalate, ZnO hollow microspheres with mesoporous shells were synthesized via a simple solvothermal approach without any templates and surfactants. The observations of morphology and structure performed by field emission scanning electronic microscopy and transmission electron microscopy indicated that the shells of the ZnO hollow spheres were built from nanosheets which were composed of nanoparticles. The transformation of structure and composition of samples were investigated by X-ray diffraction, X-ray photoelectron spectrometry and fourier transform infrared absorption spectroscopy. The formation mechanism of the hollow spheres is proposed based on time-dependent experimental results. The ZnO hollow microspheres exhibited a high photocatalytic activity for decolorization of Rhodamine B under ultraviolet irradiation.