In situ generation of palladium nanoparticles: ligand-free palladium catalyzed ultrafast Suzuki-Miyaura cross-coupling reaction in aqueous phase at room temperature

An ultrafast and highly efficient ligand-free Suzuki-Miyaura cross-coupling reaction between aryl bromides/iodides and arylboronic acids using palladium chloride as catalyst in PEG400/H₂O in air at room temperature has been developed. TEM showed that palladium nanoparticles were generated in situ from PdCl₂/PEG400/H₂O without use of other reductants. The catalyst system can be recycled to reuse three times with good yields.     

Polyion complex stabilized palladium nanoparticles for Suzuki and Heck reaction in water

Palladium nanoparticles stabilized by a polyion complex composed of poly{4-chloromethylstyrene-co-(4-vinylbenzyl) tributylammonium chloride} and poly(acrylic acid) were easily recovered by filtration after pH treatment. The polyion complex stabilized palladium nanoparticles have high catalytic activity for the Suzuki and Heck reactions in water.     

Polyaniline supported palladium catalyzed Suzuki-Miyaura cross-coupling of bromo- and chloroarenes in water

Polyaniline supported palladium catalysts were prepared from different palladium precursors and all the catalysts are well characterized using ICP-AES, FTIR, TGA-DTA, SEM-EDX and XPS analysis. All the catalysts were tested for Suzuki-Miyaura coupling of bromo- and chloroarenes in water and the catalyst prepared from PdCl₂ precursor was found to be the most effective catalyst. The catalyst can easily be recovered by simple filtration and reused for several cycles with almost consistent activity.     

Suzuki-Miyaura cross-couplings of arenediazonium tetrafluoroborate salts with arylboronic acids catalyzed by aluminium hydroxide-supported palladium nanoparticles

Suzuki-Miyaura cross-couplings of arenediazonium salts with arylboronic acids catalyzed by highly active aluminium hydroxide-supported palladium nanoparticles catalyst have been investigated for the first time. The reactions are performed at 25 °C in MeOH without any base and ligand to afford biaryls in good to excellent yields under non-anhydrous and non-degassed conditions.     

Phosphine-free palladium acetate catalyzed Suzuki reaction in water

Pd(OAc)(2) in a mixture of water and poly(ethylene glycol) (PEG) is shown to be an extremely active catalyst for the Suzuki reaction of aryl iodides and bromides. The reaction can be conducted under mild conditions (50 degrees C) without the use of a microwave or phosphine ligand in high yields. The isolation of the products is readily performed by the extraction of diethyl ether, and the Pd(OAc)(2)-PEG can be reused without significant loss in activity.     

Aerobic ligand-free Suzuki coupling catalyzed by in situ-generated palladium nanoparticles in water

A simple and efficient procedure for Suzuki coupling of aryl bromides/iodides with aryl- and alkylboronic acids catalyzed by in situ-generated palladium(0) nanoparticles in water without any ligand in open air to produce a variety of functionalized biaryls and alkyl-aryls has been developed. The boronic acids act here as the reducing agent for the formation of Pd nanoparticles. The reactions are remarkably fast (5 min) and high yielding. The catalyst is recyclable up to three runs without loss of efficiency.     

A highly efficient asymmetric Suzuki-Miyaura coupling reaction catalyzed by cationic chiral palladium(ii) complexes

Cationic chiral palladium(ii) complexes are shown to catalyze the asymmetric coupling reaction of aryl boronates and aryl halides within a short period of time in good yield and enantioselectivity.     

A ligand-free Heck reaction catalyzed by the in situ-generated palladium nanoparticles in PEG-400

<正>A ligand-free Heck reaction catalyzed by in situ-generated palladium nanoparticles in PEG-400 has been developed.This catalytic system is a simple and active protocol for the Heck reaction of aryl halides under mild conditions.Comparative experiments demonstrated that the Heck reaction catalyzed by the palladium nanoparticles in situ-generated under the Heck reaction conditions was carried out much quicker than that by the in ex situ-generated ones.     

Water-soluble surface-anchored gold and palladium nanoparticles stabilized by exchange of low molecular weight ligands with biamphiphilic triblock copolymers

A study is presented of the stabilization of gold and palladium nanoparticles (NPs) via a place-exchange reaction. Au and Pd NPs of approximately 3.5 nm were prepared by a conventional method using tetraoctylammonium bromide (TOAB) as the stabilizing agent. The resulting nanoparticles, referred to as Au-TOAB or Pd-TOAB, were later used as templates for the replacement of TOAB ligand with poly(ethylene oxide)- b-polystyrene- b-poly(4-vinylpyridine) (PEO- b-PS- b-P4VP) triblock copolymer. This biamphiphilic triblock copolymer was synthesized by atom transfer radical polymerization (ATRP) with control over the molecular weight and polydispersity. The place-exchange reaction was mediated through strong coordination forces between the 4-vinylpyridine copolymer and the metal species located on the surface of the nanoparticles. In addition, the displacement of the outgoing low molecular weight TOAB ligands by high molecular weight polymers is an entropy-assisted process and is believed to contribute to stabilization. The prepared complex, polymer-NP, exhibits greatly improved stability over the metal-NP complex in common organic solvents for the triblock copolymer. Self-assembly in water after ligand exchange resulted in micellar structures of about approximately 20 nm (electron microscopy) with the metal NP found located on the surface of the micelles. The stability of the nanoparticles in water was shown to depend greatly on the grafting density of the copolymer, with high stability (more than 6 months) at high grafting density and low stability, accompanied with irreversible agglomeration, at relatively low grafting densities. The surprising location of the metal NP (for both Au and Pd) on the surface of the micelles in water is explained by the fact that, upon self-assembly in THF/water system, the most hydrophobic chains (i.e., PS) undergo self-assembly first at low water content forming the core, followed by the P4VP (whether or not associated with the metal) forming a shell, and finally the PEO forming the corona. In lower metal content assemblies, the P4VP chains located in the shell undergo swelling in an acidic medium causing a substantial increase in micellar corona size, as confirmed by dynamic light scattering measurements. The present study offers a simple approach for the stabilization of various metal nanoparticles of catalytic interest, using a unique polymeric support that can be dispersed in organic solvents as well as aqueous solutions.     

Practical synthesis of 6-aryluridines via palladium(II) acetate catalyzed Suzuki-Miyaura cross-coupling reaction

Sugar-protected 6-halouridine derivatives underwent Suzuki-Miyaura cross-coupling reactions with arylboronic acids in the presence of palladium(II) acetate as a catalyst, triphenylphosphine as a ligand, and sodium carbonate as a base. This methodology is applicable to both the C5- and C6-position of uridine and provides a direct access for versatile uridine derivatives.     

Convenient and efficient Suzuki-Miyaura cross-coupling catalyzed by a palladium/diazabutadiene system

[structure: see text]. A Pd(OAc)2/diazabutadiene system has been developed for the catalytic cross-coupling of aryl halides with arylboronic acids. A combination of the diazabutadiene DAB-Cy (1, N,N'-dicyclohexyl-1,4-dizabutadiene) and Pd(OAc)2 was found to form an excellent catalyst for the Suzuki-Miyaura cross-coupling of various aryl bromides and activated aryl chlorides with arylboronic acids.     

Phosphine dendrimer-stabilized palladium nanoparticles, a highly active and recyclable catalyst for the Suzuki-Miyaura reaction and hydrogenation

[reaction: see text] Phosphine dendrimer-stabilized palladium nanoparticles were synthesized and found to be highly effective for Suzuki coupling reactions, affording good to excellent product yields, high turnover number (up to 65,000), and excellent reusability (up to 9 catalytic runs). Furthermore, these Pd nanoparticles are efficient and selective catalysts for hydrogenations.     

Synthesis of mesoporous silicas in alkaline and acidic media using the systems cetyltrimethylammonium tosylate (CTAT)-Pluronic F127 triblock copolymer and CTAT-Pluronic F68 triblock copolymer as templates

Mesoporous silica materials were synthesized in alkaline and acidic media, using cetyltrimethylammonium tosylate (CTAT), Pluronic triblock copolymers F127 and F68, and mixtures of CTAT with each copolymer in order to investigate the effects of pH, surfactant concentration, and CTAT/triblock copolymer molar ratios on the morphology and texture of the synthesized materials. The results show that the kind of mesoporous materials and their pore size can be tuned by changing not only the pH but also the proportion of components and the nature of the copolymer. In alkaline synthesis, microscopic bicontinuous materials are obtained, which are composed by nanoscopic plate-like particles having slit-shaped pores. In acidic synthesis, on the contrary, monolithic silicas are obtained. These materials are also composed by nanoscopic plate-like particles having slit-shaped pores, although in some cases, the microscopic structures are formed by fused spherical particles. The inclusion of the triblock copolymer in the template composition causes a transformation from a bimodal to a monomodal pore size distribution, leading to small and nearly round pores which are probably formed by copolymer or copolymer-CTAT mixed micelles. The differences between the systems synthesized by CTAT-Pluronic F127 and CTAT-Pluronic F68 are explained on the basis of the different interactions between each copolymer and CTAT.     

Suzuki-Miyaura cross-coupling reaction catalyzed by Pd/MgLa mixed oxide

A new, reusable Pd/MgLa mixed oxide catalyst has been applied successfully in the Suzuki-Miyaura carbon-carbon cross-coupling reaction of aryl halides as well as benzylic bromide with boronic acids in ethanol. The catalyst is air stable, can be stored and handled under an ambient atmosphere and after the reaction it can be recovered by simple filtration and reused without significant loss of activity.     

Suzuki-Miyaura coupling catalyzed by polymer-incarcerated palladium, a highly active, recoverable, and reusable Pd catalyst

[reaction: see text] Suzuki-Miyaura coupling using a highly efficient and reusable polymer-incarcerated palladium (PI Pd) is described. Various coupling reactions proceeded smoothly using PI Pd with phosphine ligands, and the catalyst could be recovered by simple filtration and reused several times without loss of activity.     

Concentration, temperature, and salt-induced micellization of a triblock copolymer Pluronic L64 in aqueous media

The effect of copolymer concentration, temperature, and sodium halides (NaI, NaBr, NaCl, and NaF) on micellization and micellar properties of a poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) amphiphilic copolymer (Pluronic L64: EO13PO30EO13), was examined by different methods such as dye spectral change, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), small angle neutron scattering (SANS), dynamic light scattering (DLS), viscosity, and cloud point (CP). Temperature/polymer concentration/salt dependent aggregation behavior of L64 was observed. The data on critical micelle concentration (CMC), critical micelle temperature (CMT), (CP), micelle size, and shape are reported. The Fourier transform infrared (FTIR) showed temperature dependent changes in C-O-C stretching variation band towards higher wave numbers and broadening of band width during the micellization process; this was attributed to increase in proportion of the anhydrous methyl groups, while the proportion of the hydrated methyl groups was decreased. Differential scanning calorimetry (DSC) provides CMTs and CPs from the same experiment. CMC values derived from dye spectral change, decrease significantly with the addition of salt. The increases in salt/copolymer concentration lower the onset temperature of micellization (CMT). Halide anions influence both CMT and CP in the order of F- > Cl- > Br- > I- when total salt and copolymer concentration kept constant. SANS results show the increase of inter-micellar interaction due to the increase in temperature/salt concentration; this is supported by viscosity data.     

Cross-linked polymer supported palladium catalyzed carbonylative Sonogashira coupling reaction in water

A cross-linked polymer-supported ionic liquid immobilized palladium catalyst, which is prepared by reaction of the Pd(OAc)₂ with copolymer of 3-butyl-1-vinylimidazolium iodide and divinylbenzene, was well characterized and employed as an effective heterogeneous catalyst for carbonylative Sonogashira coupling reaction of aryl iodides with terminal alkynes in water, affording the corresponding α,β-alkynyl ketones in good to excellent yields. The catalytic system not only solves the basic problem of homogeneous palladium catalyst recovery and reuse but also avoids the use of toxic phosphine ligands. The stability of supported palladium was also discussed.     

Pd nanoparticles on a porous ionic copolymer: a highly active and recyclable catalyst for Suzuki-Miyaura reaction under air in water

A porous copolymer of an IL with divinylbenzene was prepared and applied as a support for Pd nanoparticles. The supported Pd nanocatalyst was found to be extremely active for Suzuki-Miyaura reaction of aryl bromides and chlorides with phenylboronic acid even with 10 ppm Pd loading under air in water.     

Preparation and characterisation of silica monoliths using a triblock copolymer (F68) as porogen

Silica-based monoliths with co-continuous structure were successfully prepared through a sol–gel process in the presence of a poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (F68). The triblock copolymer was compared to the classical PEG, in the formation of silica monoliths and was demonstrated to lead to co-continuous structures in a wider composition range, presenting smaller through pores. Moreover, mesoporous structures templated at the sol–gel transition were assumed to occur at the surface of the silica skeleton while PEG exhibited no mesopore templating.