Synthesis,characterization and catalytic activities of bimetallic modified MCM-41 for epoxidation of styrene

Mesoporous molecular sieves MCM-41 modified by bimetal (Zr and Ti) ions with ordered hexagonal arrangement were prepared by direct synthesis under microwave–hydrothermal conditions at 403 K. FT-IR, N₂ adsorption–desorption, scanning electron microscope, high-resolution transmission electron microscope, element mapping, X-ray photoelectron spectroscopy, diffuse Reflectance UV–Visible Spectra etc. were used to characterize as-prepared materials. The results showed that Zr and Ti were introduced into MCM-41 and bonds of Zr–O–Si and Ti–O–Si were formed in framework of the MCM-41. Moreover, their structures with ordered arrangement were still retained. The microwave–hydrothermal method might shorten the synthesis time from days to hours and the as-prepared catalyst had a high catalytic activity and selectivity for the liquid-phase epoxidation of styrene.     

Carbon dioxide adsorption over DIPA functionalized MCM-41 and SBA-15 molecular sieves

The capture of carbon dioxide was carried out using MCM-41 and SBA-15 as adsorbents. These mesoporous materials were synthesized by the hydrothermal method, and subsequently functionalized with the di-iso-propylamine (DIPA). Then, they were characterized by XRD, BET, and TG/DTG. The X-ray diffraction patterns of the synthesized samples showed the characteristic peaks of MCM-41 and SBA-15, indicating that the structures of these materials were obtained. The functionalized samples presented a decrease of the intensities of these peaks, suggesting a decreasing in the structural organization of the material; however, the mesoporous structure was preserved. For the adsorption capacity measurements, the materials were previously saturated with carbon dioxide at 75 °C, and then desorbed in a thermobalance in the temperature range of 25–900 °C, under helium atmosphere. Desorption tests showed that the functionalized MCM-41 presented a weight loss of 7.5 wt%, against 5.9 wt% for SBA-15. The obtained values indicate that these nanostructured materials can be used as adsorbent for carbon dioxide capture.     

Synthesis of MCM-41 supported amino-palladium complex and its catalytic performance for heck reaction

Using MCM-41 as the supporter, a series of MCM-41 supported amino-palladium complexes has been prepared and characterized by XRD (X-ray diffraction) and XPS (X-ray photoelectron spectroscopy), etc. The XRD and XPS results indicate that the Pd coordinates with the -NH₂ groups on the MCM-41 surface, and the structure of MCM-41 has been not damaged. Its catalytic performance for Heck arylation of alkene with aryl iodide shows that the catalysts have high activity and stereoselectivity in 70–90°C. The product of Heck reaction is in E form. And the effect of the preparation condition of catalyst on the catalytic performance was examined. Translated form Chinese Journal of Organic Chemistry, 2008, 28(5) (in Chinese)     

Heteropolyacid (H3PW12O40) supported MCM-41: An efficient solid acid catalyst for the green synthesis of xanthenedione derivatives

HPWA/MCM-41 mesoporous molecular sieves of appropriate ratios were prepared by loading HPWA on siliceous MCM-41 by the wet impregnation method. The prepared HPWA/MCM-41 materials were characterized by X-ray diffraction analysis (XRD) and BET surface area and FT-IR measurements. The morphology of mesoporous materials was studied by TEM observation. The catalytic activity of the above materials was tested for the condensation of dimedone (active methylene carbonyl compound) and various aromatic aldehyes under liquid phase conditions at 90 °C. The products were confirmed by FT-IR, ¹H NMR and ¹³C NMR studies. HPWA supported MCM-41 catalysts catalyses efficiently the condensation of dimedone and aromatic aldehydes in ethanol and other solvents under liquid phase conditions to afford the corresponding xanthenedione derivatives. Activities of the catalysts follow the order: HPWA/MCM-41(20 wt.%) > HPWA/MCM-41(30 wt.%) > H₃PW₁₂O₄₀·nH₂O > HPWA/MCM-41(10 wt.%) > HPWA/SiO₂ (20 wt.%) > HM (12) > Hβ (8) > Al-MCM-41 (50). Various advantages associated with these protocols include simple workup procedure, short reaction times, high product yields and easy recovery and reusability of the catalyst.     

The synthesis of MCM-41 nanomaterial from Algerian Bentonite: The effect of the mineral phase contents of clay on the structure properties of MCM-41

This study focuses on the MCM-41 material (Mobil Composition of Matter). The MCM-41 nanomaterial presents higher physical properties such as pore sizes, surface areas and pore volumes. This material is usually synthesized by using laboratory reagents as silicate sources and aluminium source. These laboratory reagents are still expensive and toxic for large scale production. The main aim of this work is to resolve this problem and to replace these expensive laboratory reagents by more cost effective ones. The volclay and Algerian bentonite low-cost mass clay materials are used as silicate and acuminate sources separately by adopting an alkaline fusion process to extract both silicon and aluminium (1 kg of silicium and aluminium from volclay and Algerian bentonite cost around 0.03 and 0.01 € whereas the same amount of silicon from ludox and aluminium from sodium aluminates cost around 350 €). The synthesis of MCM-41 from bentonite was carried out by the hydrothermal method using the supernatants of bentonite (in the form of sodium silicate and sodium aluminate). On the basis of the data obtained from powder X-ray diffraction (XRD), transmission electron microscopy (TEM) and N₂ adsorption and desorption, the results revealed that the properties of MCM-41 synthesized from Algerian bentonite and volclay separately depend on both elemental composition and mineral phase contents of the used bentonite. Pure and highly ordered hexagonal mesoporous MCM-41 with uniform pore sizes and a high specific surface area have been successfully synthesized without any phases which exist in natural bentonite. The Algerian bentonite was chosen because of its low cost compared to volclay, another commercial clay source.     

锌锡双金属掺杂MCM-41的合成及表征

以硅酸钠为硅源, 锡酸钠，硝酸锌为金属源，十六烷基三甲基溴化铵为模板剂，采用直接水热合成法合成出了锌锡双金属同时掺杂的介孔MCM-41。通过ICP﹑XRD、TG-DTA﹑FTIR﹑HRTEM以及BET等技术对材料的结构和性质进行了表征。结果表明，合成的材料具有典型的六方介孔结构，比表面高，孔分布窄，热稳定性较高，且锌锡可能进入介孔MCM-41骨架中。该材料对苯酚羟基化反应具有良好的催化性能，双金属修饰MCM-41催化活性明显优于单组分掺杂。     

Synthesis of MCM-48 from silatrane via sol–gel process

High-quality cubic MCM-48 is successfully synthesized using a new silica source known as silatrane and cetyltrimethylammonium bromide (CTAB) as the structure-directing agent via sol–gel process. The effects of synthesis parameters, viz. crystallization temperature, crystallization time, surfactant concentration, quantity of NaOH, and silica source, on the product structure are investigated. The synthesized samples are characterized using X-ray diffractometer (XRD), N₂ adsorption–desorption isotherms, and electron microscopy. Optimally, this product is synthesized from samples crystallized at 140°C for 16 h with a CTAB/SiO₂ ratio of 0.3 and NaOH/SiO₂ ratio of 0.5. The XRD result exhibits a well-resolved pattern, corresponding to the Ia3d space group of MCM-48. The BET surface area of this product is as high as 1,300 m²/g with a narrow pore-size distribution of 2.86 nm. The scanning electron microscopic (SEM) images also show the truncated octahedral shape and well-ordered pore system of MCM-48 particles.     

Synthesis, characterization, and catalytic properties of stable mesoporous molecular sieve MCM-41 prepared from zeolite mordenite

Mesoporous molecular sieves (denoted as M-MCM-41) with ordered hexagonal structure have been successfully synthesized from the assembly of precursors from preformed zeolite Mordenite with CTAB surfactant micelle in alkaline media. The samples were characterized by XRD, N₂ adsorption, IR and DTG. The materials exhibit highly hydrothermal stability, as compared with conventional MCM-41. Characterization results indicate that the mesoporous walls of M-MCM-41 contain the secondary building units similar to those in microporous crystal of zeolite Mordenite. In catalytic dealkylation of C10⁺ aromatic hydrocarbon, M-MCM-41 shows higher activities in comparison with Mordenite and MCM-41, which would be ascribed to the combination of advantages of both MCM-41 (large pores) and Mordenite (strong acidity). Furthermore, this synthesis strategy could be used as a new general method for the preparation of hydrothermally stable mesoporous aluminosilicate materials under alkaline conditions.     

Synthesis of [Si]-MCM-41 from TEOS and water glass: the water glass-enhanced condensation of TEOS under alkaline conditions

Mesoporous [Si]-MCM-41 molecular sieve systems have been fabricated by aging silica gels in CTAB both at RT and under hydrothermal conditions with or without stirring. For the synthesis involving water glass as a SiO₂ source, optimal conditions (100 °C, pH 10, crystallization time 2–3 days) gave reproducible, highly ordered [Si]-MCM-41 materials in multi gram scale with high lattice parameter values and BET surface areas. The synthesis with TEOS as silica source produced an inferior quality material. A novel synthesis route involving the use of mixtures of the two precursors gave [Si]-MCM-41 with improved structural (XRD) and microstructural (HRTEM) long-range order. Addition of small amounts of water glass to a TEOS-based synthesis gel under stirred conditions produced [Si]-MCM-41 with excellent mesoporosity, long-range microstructural order, XRD and S _BET properties. These properties are reminiscent of those for materials obtained from water glass as a sole SiO₂ source. The advantage of this route is that it gave high-quality materials at relatively lower temperatures (80 °C) and shorter crystallization times (6 h) after 21 h aging at RT. The variation of the XRD d ₁₀₀ peak position, BET and HRTEM properties with [TEOS]/[water glass] ratio revealed that a ratio = 3.95 gave optimal production of the highly ordered materials. The data suggests that water glass acts as a structure-directing agent for the TEOS and is incorporated into the final structure.     

Adsorption of crystal violet dye from aqueous solution using mesoporous materials synthesized at room temperature

In this work, batch adsorption experiments are carried out for crystal violet dye using mesoporous MCM-41 synthesized at room temperature and sulfate modified MCM-41 prepared by impregnation method using H₂SO₄ as sulfatising agent. The surface characteristics, pore structure, bonding behavior and thermal degradation of both the MCM-41 samples are characterized by nitrogen adsorption/desorption isotherms, X-ray diffraction (XRD) patterns, Fourier transform infrared (FT-IR) spectroscopy and thermo gravimetric analysis (TGA). The adsorption isotherm, kinetics and thermodynamic parameters are investigated for crystal violet (CV) dye using the calcined and sulfated MCM-41. Results are analysed using Langmuir, Freundlich and Redlich-Peterson isotherm models. It is found that the Freundlich model is an appropriate model to explain the adsorption isotherm. The highest adsorption capacity achieved is found to be 3.4×10⁻⁴ mol g⁻¹ for the sulfated MCM-41. The percentage removal of crystal violet dye increases with increase in the pH for both the MCM-41 adsorbents. Kinetics of adsorption is found to follow the second-order rate equation. From the thermodynamic investigation, it is evident that the adsorption is exothermic in nature.     

Effect of pore expansion and amine functionalization of mesoporous silica on CO2 adsorption over a wide range of conditions

Adsorption of CO₂ was investigated over a wide range of conditions on a series of mesoporous silica adsorbents comprised of conventional MCM-41, pore-expanded MCM-41 silica (PE-MCM-41) and triamine surface-modified PE-MCM-41 (TRI-PE-MCM-41). The isosteric heat of adsorption, calculated from adsorption isotherms at different temperatures (298–328 K), showed a significant increase in CO₂–adsorbent interaction after amine functionnalization of PE-MCM-41, consistent with the high CO₂ uptake in the very low range of CO₂ concentration. The CO₂ adsorption isotherm and kinetics data showed the high potential of TRI-PE-MCM-41 material for CO₂ removal in gas purification and separation applications. With TRI-PE-MCM-41, the CO₂ selectivity over N₂ was drastically improved over a wide range of conditions compared to pure mesoporous silica. Moreover, the adsorption was reversible and fast, and the adsorbent was thermally stable and tolerant to moisture.     

Synthesis, characterization and optical properties of silver and gold nanowires embedded in mesoporous MCM-41

Uniform nanowires of silver and gold inside the channels of MCM-41 were prepared by controlled reduction of their respective metal salts with sodium borohydride (NaBH₄). Presence of nanowires of silver and gold in MCM-41 were confirmed by high angle X-ray diffraction (XRD) data (peaks between 2ϑ = 30 − 60°) and transmission electron microscopy (TEM) confirmed the diameter of the nanowires. Diameter of nanowires is found to be ∼ 2.8 nm which is coincident with channel diameter of MCM-41. Optical properties of these heterostructured materials Ag-MCM-41 and Au-MCM-41 reveals the presence of surface plasmon absorption peaks of silver and gold respectively, and the shift in the absorption bands are associated to agglomeration of clusters inside the channels. Room temperature photoluminescence spectra exhibits interesting optical properties as observed for direct band gap semiconductors. Non-linear optical properties (NLO) corresponding to second harmonic generation (SHG) values were also recorded for self supported films of these heterostructured materials. Enhanced optical non-linearity was found to be arising from a corresponding increase of local field near the surface plasmon resonance. Further enhancement in SHG was found with poling due to an induction of orientation order.     

Surface characterization and catalytic evaluation of copper-promoted Al-MCM-41 toward hydroxylation of phenol

The Mobil Composition of Matter No. 41 (MCM-41) containing Cu and Al with Si/Al ratios varying from 100 to 10 and 1 to 6 wt.% of Cu was synthesized under hydrothermal and impregnation conditions, respectively. The samples were characterized by nitrogen adsorption–desorption measurements, X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV–Vis diffuse reflectance spectroscopy (UV–Vis DRS), temperature-programmed reduction (TPR), temperature-programmed desorption (TPD), and ²⁹Si and ²⁷Al magic-angle spinning–nuclear magnetic resonance (MAS–NMR) spectra. X-ray diffraction patterns indicate that the modified materials retain the standard MCM-41 structure. TPR patterns show the two-step reduction of Cu species. TPD study shows that Cu-impregnated Al-MCM-41 samples are more acidic than Al-MCM-41. From the MAS–NMR it was confirmed that most of the Al atoms are present tetrahedrally within the framework and some are present octahedrally in extraframework position. Impregnation of Cu shifted Al to the extraframework position. The catalytic activity of the samples toward hydroxylation of phenol in aqueous medium was evaluated using H₂O₂ as the oxidant at 80 °C. The effects of reaction parameters such as temperature, catalyst amount, amount of H₂O₂, and solvent were also investigated. Sample containing 4 wt.% copper-loaded Al-MCM-41-100 showed high phenol conversion (78%) with 68% catechol and 32% hydroquinone selectivity.     

Mesoporous materials incorporating a zinc(II) complex: Synthesis and direct luminescence quantum yield determination

New luminescent inorganic–organic hybrid materials incorporating the luminescent zinc(II) complex ZnL₂ (λ_em = 457 nm and Φ_em = 4.4% reference values for ZnL₂; HL = chelating ligand resulting from the reaction between salicylaldehyde and 3-aminopropyltriethoxysilane), covalently bonded to different types of mesoporous silica hosts (namely MCM-41, MCM-48 and SBA-15), were prepared via both the methods of grafting post-synthesis (GPS) and one-pot synthesis (OPS). The products obtained, which form the GPS [(GPS)(Zn/MCM-41), (GPS)(Zn/MCM-48), (GPS)(Zn/SBA-15)] and the OPS [(OPS)(Zn/MCM-41), (OPS)(Zn/MCM-48), (OPS)(Zn/SBA-15)] series, contain the ZnL₂ guest covalently bonded to the silica framework through silicon–oxygen bonds formed when the silane group is placed at the periphery of the Zn(II) coordination sphere. GPS and OPS materials were characterized by powder X-ray diffraction, N₂ adsorption/desorption, thermogravimetric analysis (TGA) and UV/vis spectroscopy. For the new mesoporous materials the emission quantum yield (EQY) was measured by means of an integrating sphere combined with a spectrofluorimeter. The ZnL₂ loading (measured by the ZnL₂/SiO₂ ratio calculated from TGA data) for MCM-41 appears to be independent of the synthesis procedure, whereas, for both MCM-48 and SBA-15, the ZnL₂/SiO₂ ratio of the materials obtained via OPS is about four times higher than products obtained from GPS. The ZnL₂ loaded GPS and OPS series show λ_em maxima at about 485 and 455 nm, respectively. Moreover, with reference to EQY (GPS)(Zn/SBA-15) and (OPS)(Zn/SBA-15), although featuring ZnL₂/SiO₂ ratios of 0.13 and 0.45, respectively, they showed similar EQY values: 2% and 5%. On the contrary, (GPS)(Zn/MCM-41) and (OPS)(Zn/MCM-41) which give similar ZnL₂/SiO₂ ratios (0.09 and 0.14) exhibit very different EQY, i.e. 2% and 22%, respectively.     

DSC investigation of nanocrystalline TiO<Subscript>2</Subscript> powder

The aim of the article is to investigate the influence of particle size on titanium dioxide phase transformations. Nanocrystalline titanium dioxide powder was obtained through a hydrothermal procedure in an aqueous media at high pressure (in the range 25–100 atm) and low temperature (≤200 °C). The as-prepared samples were characterized with respect to their composition by ICP (inductive coupled plasma), structure and morphology by XRD (X-ray diffraction), and TEM (transmission electron microscopy), thermal behavior by TG (thermogravimetry) coupled with DSC (differential scanning calorimetry). Thermal behavior of nanostructured TiO₂ was compared with three commercial TiO₂ samples. The sequence of brookite–anatase–rutile phase transformation in TiO₂ samples was investigated. The heat capacity of anatase and rutile in a large temperature range are reported.     

Thermogravimetric Investigations During the Synthesis of Silica-based MCM-41

MCM-41 material was synthesized starting from hydrogel containing colloidal fumed silica, sodium silicate, cetyltetramethylammonium bromide(CTMABr) as surfactant, and distilled water as solvent. These reactants were mixed to obtain a gel with the following composition: 4SiO₂:1Na₂O:1CTMABr:200H₂O. The hydrogel with pH=14 was hydrothermally treated at100°C, for 4 days. Each day, the pH was measured, and then adjusted to 9.5–10 by using 30%acetic acid solution. Thermogravimetry was the main technique, which was used to monitor the participation of the surfactant on the MCM-41 nanophase, being possible to determine the temperature ranges relative to water desorption as well as the surfactant decomposition and silanol condensation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Investigation of Mg modified mesoporous silicas and their CO2 adsorption capacities

CO₂ adsorption properties on Mg modified silica mesoporous materials were investigated. By using the methods of co-condensation, dispersion and ion-exchange, Mg²⁺ was introduced into SBA-15 and MCM-41, and transformed into MgO in the calcination process. The basic MgO can provide active sites to enhance the acidic CO₂ adsorption capacity. To improve the amount and the dispersion state of the loading MgO, the optimized modification conditions were also investigated. The XRD and TEM characteristic results, as well as the CO₂ adsorption performance showed that the CO₂ adsorption capacity not only depended on the pore structures of MCM-41 and SBA-15, but also on the improvement of the dispersion state of MgO by modification. Among various Mg modified silica mesoporous materials, the CO₂ adsorption capacity increased from 0.42 mmol g⁻¹ of pure silica SBA-15 to 1.35 mmol g⁻¹ of Mg–Al–SBA-15-I1 by the ion-exchange method enhanced with Al³⁺ synergism. Moreover, it also increased from 0.67 mmol g⁻¹ of pure silica MCM-41 to 1.32 mmol g⁻¹ of Mg–EDA–MCM-41-D10 by the dispersion method enhanced with the incorporation of ethane diamine. The stability test by 10 CO₂ adsorption/desorption cycles showed Mg–urea–MCM-41-D10 possessed quite good recyclability.     

AlMCM-41介孔分子筛的合成及表征

以拟薄水铝石为铝源、水玻璃为硅源、十六烷基三甲基溴化铵为模板剂,在110℃时水热晶化合成了含Al的MCM-41介孔分子筛.采用X射线衍射(XRD)、N2吸附-脱附、固体29Si、27Al魔角旋转核磁共振技术(MASNMR)、扫描电镜(SEM)及吡啶吸附傅里叶变换红外(FTIR)光谱技术对AlMCM-41分子筛进行了表征.结果表明:AlMCM-41分子筛具有六方排列的孔道结构,同时具有很高的相对结晶度、比表面积和孔容,且孔分布单一;AlMCM-41分子筛中Si原子在骨架内键合的程度更高,使AlMCM-41分子筛具有更好的骨架晶化程度;同时具有四配位骨架铝,使AlMCM-41介孔分子筛具有适当的酸性.     

Synthesis of LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> nanoparticles by modified Pechini method and their enhanced rate capability

Layered LiNi_1/3Co_1/3Mn_1/3O₂ nanoparticles were prepared by modified Pechini method and used as cathode materials for Li-ion batteries. The pyrolytic behaviors of the foamed precursors were analyzed by use of simultaneous thermogravimetric and differential thermal analysis (TG-DTA). Structure, morphology and electrochemical performance characterization of the samples were investigated by X-ray diffraction (XRD), field emission scanning electron macroscopy(SEM), Brunauer-Emmett-Teller (BET) specific surface area and charge–discharge tests. The results showed that the samples prepared by modified Pechini method caclined at 900 °C for 10 h were indexed to pure LiNi_1/3Co_1/3Mn_1/3O₂ with well hexagonal structure. The particle size was in a range of 100–300 nm. The specific surface area was larger than that of the as-obtained sample by Pechini method. Initial discharge capacity of 163.8 mAh/g in the range 2.8–4.4 V (vs. Li/Li⁺) and at 0.1C for LiNi_1/3Co_1/3Mn_1/3O₂ prepared by modified Pechini method was obtained, higher than that of the sample prepared by Pechini method (143.5 mAh/g). Moreover, the comparison of electrochemical results at different current rates indicated that the sample prepared by modified Pechini method exhibited improved rate capability.     

Study of the Adsorption Properties of MCM-41 Molecular Sieves Prepared at Different Synthesis Times

The variation of surface properties of SiMCM-41 and AlMCM-41 nanoporous materials as function of synthesis time was examined. The main properties studied were: surface area, pore diameter, pore volume, mesoporous parameter, and wall thickness. Siliceous MCM-41 molecular sieves were synthesized starting from hydrogels with the following molar compositions: 4.58SiO₂:0.435Na₂O:1 CTMABr:200 H₂O for SiMCM-41, and 4.58SiO₂:0.485 Na₂O:1 CTMABr:0.038 Al₂O₃:200 H₂O, for AlMCM-41. Cetyltrimethylammonium bromide (CTMABr) was used as the structural template. The crystallographic parameters were obtained from XRD data and by nitrogen adsorption using the BET and BJH methods. The results obtained showed a significant variation of the surface properties of the MCM-41 materials as a function of the synthesis time reaching silica wall thickness of ca. 2 nm on the fourth day.