共查询到20条相似文献,搜索用时 203 毫秒
1.
P. Achalla J. McCormick T. Hodge C. Moreland P. Esnault A. Karim D. Raghavan 《Journal of Polymer Science.Polymer Physics》2006,44(3):492-503
The bulk mechanical properties of a blend of elastomers are found to depend on the micro and nano scale morphology of the phases of the materials in the blend. In this study, we examine the phase morphology of blends of incompatible elastomers using Atomic Force Microscopy (AFM). Specifically, nanoindentation and Tapping Mode AFM (TMAFM) imaging techniques are used as experimental tools for mapping the composition of unfilled elastomeric blends. Depending on the composition of the blend, either co‐continuous or discontinuous domain/matrix morphology is observed. To identify the different components in bromobutyl (BIIR)/natural rubber (NR) blends, nanoscale indentation measurements were made on the observed phase‐separated regions. Results from force mode AFM and mechanical measurements of bulk NR and BIIR are used to assist in the interpretation of the TMAFM results for the BIIR/NR blends. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 492–503, 2006 相似文献
2.
Kittiporn Sanguansap 《European Polymer Journal》2006,42(10):2334-2342
Polymerisation of methyl methacrylate (MMA) on the surface of natural rubber (NR) film was studied in order to increase the surface hardness, roughness and, hence, to decrease the friction coefficient of rubber. We used the two-step process: (i) swelling of MMA and tert-butyl hydroperoxide, emulsified in an aqueous solution of sodium dodecyl sulphate, onto the NR film surface, and (ii) subsequently immersing the swollen rubber strip into an alkaline aqueous solution of ferrous ion/fructose for redox initiation. The presence of PMMA on the NR surface was examined by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR). Increasing the concentration of ferrous ion caused an increase in MMA conversion. The surface morphology observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM) in tapping mode revealed the aggregation of micronmetre-scale nodules on the modified surface. The surface hardness and roughness increased with increasing PMMA content. 相似文献
3.
For sectioned biologic tissues, atomic force microscopy (AFM) topographic images alone hardly provide adequate information leading to revealing biological structures. We demonstrate that phase imaging in amplitude-modulation AFM is a powerful tool in mapping structures present on the surface of unfixed rat brains sections. The contrast in phase images is originated from the difference in mechanical properties between biological structures. Visualization of the native state of biological structures by way of their mechanical properties provides a complementary technique to more traditional imaging techniques such as optical and electron microscopy. 相似文献
4.
Dufrêne YF Boland T Schneider JW Barger WR Lee GU 《Faraday discussions》1998,(111):79-94; discussion 137-57
Interaction forces and topography of mixed phospholipid-glycolipid bilayers were investigated by atomic force microscopy (AFM) in aqueous conditions with probes functionalized with self-assembled monolayers terminating in hydroxy groups. Short-range repulsive forces were measured between the hydroxy-terminated probe and the surface of the two-dimensional (2-D) solid-like domains of distearoyl-phosphatidylethanolamine (DSPE) and digalactosyldiglyceride (DGDG). The form and range of the short-range repulsive force indicated that repulsive hydration/steric forces dominate the interaction at separation distances of 0.3-1.0 nm after which the probe makes mechanical contact with the bilayers. At loads < 5 nN the bilayer was elastically deformed by the probe, while at higher loads plastic deformation of the bilayer was observed. Surprisingly, a short-range repulsive force was not observed at the surface of the 2-D liquid-like dioleoylphosphatidylethanolamine (DOPE) film, despite the identical head groups of DOPE and DSPE. This provides direct evidence for the influence of the structure and mechanical properties of lipid bilayers on their interaction forces, an effect which may be a major importance in the control of biological processes such as cell adhesion and membrane fusion. The step height measured between lipid domains in the AFM topographic images was larger than could be accounted for by the thickness and mechanical properties of the molecules. A direct correlation was observed between the repulsive force range over the lipid domains and the topographic contrast, which provides direct insight into the fundamental mechanisms of AFM imaging in aqueous solutions. This study demonstrates that chemically modified AFM probes can be used in combination with patterned lipid bilayers as a novel and powerful approach to characterize the nanometer scale chemical and physical properties of heterogeneous biosurfaces such as cell membranes. 相似文献
5.
The combination of an atomic force microscope (AFM) with a Confocal Raman Microscope (CRM) has been used to study the composition of various thin films of polymer blends. The high spatial resolution of the AFM enables the morphological characterization of the polymer blends on the nanometer scale. Furthermore, when operating the AFM in Digital Pulsed Force Mode (DPFM), topographic information and local stiffness can be simultaneously recorded. This allows the material-sensitive characterization of heterogeneous materials. Thin films where PMMA (at room temperature a glassy polymer) is blended with two different styrene-butadiene rubbers are investigated. The presence of PMMA in both phase-separated thin films allows the comparison of the mechanical properties of the two different rubber phases using DPFM-AFM. When PMMA is blended with PET due to their similar mechanical properties (both are in the glassy state at room temperature) the assignment of the two phases to the corresponding polymers by AFM is rather difficult. Here, Raman spectroscopy provides additional information on the chemical composition of materials. In combination with a confocal microscope, the spatial distribution of the various phases can be determined with a resolution down to 200 nm. Therefore, the topographically different structures observed in AFM images can be associated to the chemical composition by using the Confocal Raman Microscope (CRM). 相似文献
6.
Nelson A Muir BW Oldham J Fong C McLean KM Hartley PG Oiseth SK James M 《Langmuir : the ACS journal of surfaces and colloids》2006,22(1):453-458
Radio-frequency glow-discharge plasma polymer thin films of allylamine (AA) and hexamethyldisiloxane (HMDSO) were prepared on silicon wafers and analyzed by a combination of X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), X-ray reflectometry (XRR), and neutron reflectometry (NR). AFM and XRR measurements revealed uniform, smooth, defect-free films of 20-30 nm thickness. XPS measurements gave compositional data on all elements in the films with the exception of hydrogen. In combination with XRR and NR, the film composition and mass densities (1.46 and 1.09 g cm(-)(3) for AA and HMDSO, respectively) were estimated. Further NR measurements were conducted with the AA and HMDSO films in contact with water at neutral pH. Three different H(2)O/D(2)O mixtures were used to vary the contrast between the aqueous phase and the polymer. The amount of water penetrating the film, as well as the number of labile protons present, was determined. The AA film in contact with water was found to swell by approximately 5%, contain approximately 3% water, and have approximately 24% labile protons. The HDMSO polymer was found to have approximately 6% labile protons, no thickness increase when in contact with water, and essentially no solvent penetration into the film. The difference in the degree of proton exchange within the films was attributed to the substantially different surface and bulk chemistries of the two films. 相似文献
7.
Houston JE Doelling CM Vanderlick TK Hu Y Scoles G Wenzl I Lee TR 《Langmuir : the ACS journal of surfaces and colloids》2005,21(9):3926-3932
We report the results of a direct comparison of the adhesion, friction, and mechanical properties between alkanethiol self-assembled monolayer films terminated by either CH(3) or CF(3) end groups using both interfacial force (IFM) and atomic force (AFM) microscopies. The purpose of this work is to gain insight into the detailed origins of the differing frictional behavior previously observed with AFM. The IFM results reveal an increased adhesive interaction for the CF(3)-terminated film due to the highly polar nature of the end groups. In agreement with earlier studies, the AFM results show two linear regions with differing frictional slopes for the CH(3)-terminated film but only a single slope for the CF(3)-terminated film. We contrast the differences between these techniques, approximately 100 times smaller tips for the AFM, and discuss the role of the mechanical properties, the increased adhesive interaction, and the amount of disorder present in the film in creating differences in frictional behavior between the two systems. We conclude that increased adhesion for the CF(3)-terminated film plays an important role in the observed differences in frictional behavior, while the differences between the two techniques can be traced to the different tip sizes and the consequent responses to the presence of disorder in the films. 相似文献
8.
Xianjuan Pang Junying Hao Peng Wang Yanqiu Xia Weimin Liu 《Surface and interface analysis : SIA》2011,43(3):677-682
Hydrogenated TiAl‐doped a‐C:H films were deposited on Si substrates by middle frequency magnetron sputtering TiAl target in argon and methane gas mixture atmosphere. Effects of substrate bias voltage on structure and properties of the films, such as the surface morphology, hardness, chemical nature and bond types, were investigated by means of atomic force microscopy (AFM), XPS, Raman spectroscopy and nanoindentation. The friction and wear behaviors of the deposited films were characterized on an UMT‐2MT tribometer. SEM was utilized to analyze the wear scar on steel balls and debris after sliding on the deposited films under dry friction conditions. The results demonstrated that the film deposited at ? 100 V exhibited low friction coefficient which is attributed to the easier formation of graphitized transfer layer. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
9.
Correlated atomic force microscopy and fluorescence lifetime imaging of live bacterial cells 总被引:3,自引:0,他引:3
Micic M Hu D Suh YD Newton G Romine M Lu HP 《Colloids and surfaces. B, Biointerfaces》2004,34(4):205-212
We report on imaging living bacterial cells by using a correlated tapping-mode atomic force microscopy (AFM) and confocal fluorescence lifetime imaging microscopy (FLIM). For optimal imaging of Gram-negative Shewanella oneidensis MR-1 cells, we explored different methods of bacterial sample preparation, such as spreading the cells on poly-L-lysine coated surfaces or agarose gel coated surfaces. We have found that the agarose gel containing 99% ammonium acetate buffer can provide sufficient local aqueous environment for single bacterial cells. Furthermore, the cell surface topography can be characterized by tapping-mode in-air AFM imaging for the single bacterial cells that are partially embedded. Using in-air rather than under-water AFM imaging of the living cells significantly enhanced the contrast and signal-to-noise ratio of the AFM images. Near-field AFM-tip-enhanced fluorescence lifetime imaging (AFM-FLIM) holds high promise on obtaining fluorescence images beyond optical diffraction limited spatial resolution. We have previously demonstrated near-field AFM-FLIM imaging of polymer beads beyond diffraction limited spatial resolution. Here, as the first step of applying AFM-FLIM on imaging bacterial living cells, we demonstrated a correlated and consecutive AFM topographic imaging, fluorescence intensity imaging, and FLIM imaging of living bacterial cells to characterize cell polarity. 相似文献
10.
Trogisch S Simpson MJ Taub H Volkmann UG Pino M Hansen FY 《The Journal of chemical physics》2005,123(15):154703
We report comprehensive atomic force microscopy (AFM) measurements at room temperature of the nanoscale topography and lateral friction on the surface of thin solid films of an intermediate-length normal alkane, dotriacontane (n-C32H66), adsorbed onto a SiO2 surface. Our topographic and frictional images, recorded simultaneously in the contact mode, reveal a multilayer structure in which one to two layers of molecules adsorb adjacent to the SiO2 surface oriented with their long axis parallel to the interface followed by partial layers of molecules oriented perpendicular to the surface. The thicknesses of the parallel and perpendicular layers that we measured with the AFM agree with those inferred from previous x-ray specular reflectivity measurements on similarly prepared samples. We also observe bulk dotriacontane particles and, in contrast with our previous measurements, are able to determine their location. Above a minimum size, the bulk particles are separated from islands of perpendicularly oriented molecules by regions of exposed parallel layers that most likely extend underneath the particles. We find that the lateral friction is sensitive to the molecular orientation in the underlying crystalline film and can be used effectively with topographic measurements to resolve uncertainties in the film structure. We measure the same lateral friction on top of the bulk particles as on the perpendicular layers, a value that is about 2.5 times smaller than on a parallel layer. Scans on top of parallel layers indicate a constant height but reveal domains having different sublevels of friction. We explain this by the domains having different azimuthal orientations of the molecules. 相似文献
11.
Oncins G Garcia-Manyes S Sanz F 《Langmuir : the ACS journal of surfaces and colloids》2005,21(16):7373-7379
Friction properties of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)-supported planar bilayers deposited on mica were tested in a liquid environment by lateral force microscopy. The presence of these bilayers was detected by imaging and force measurements with atomic force microscopy. To test how the presence of NaCl affects the frictional properties of the phospholipid bilayers, four DMPC bilayers were prepared on mica in saline media ranging from 0 to 0.1 M NaCl. Changes in the lateral vs vertical force curves were recorded as a function of NaCl concentration and related to structural changes induced in the DMPC bilayer by electrolyte ions. Three friction regimes were observed as the vertical force exerted by the tip on the bilayer increased. To relate the friction response to the structure of the DMPC bilayer, topographic images were recorded at the same time as friction data. Ions in solution screened charges present in DMPC polar heads, leading to more compact bilayers. As a consequence, the vertical force at which the bilayer broke during friction experiments increased with NaCl concentration. In addition, the topographic images showed that low-NaCl-concentration bilayers recover more easily due to the low cohesion between phospholipid molecules. 相似文献
12.
Revilla R Guan L Zhu XY Yang YL Wang C 《Langmuir : the ACS journal of surfaces and colloids》2011,27(12):7603-7608
We report the study of electrowetting (EW) effects under strong electric field on poly(methyl methacrylate) (PMMA) surface by using friction force microscopy (FFM). The friction force dependence on the electric field at nanometer scale can be closely related to electrowetting process based on the fact that at this scale frictional behavior is highly affected by capillary phenomena. By measuring the frictional signal between a conductive atomic force microscopy (AFM) tip and the PMMA surface, the ideal EW region (Young-Lippmann equation) and the EW saturation were identified. The change in the interfacial contact between the tip and the PMMA surface with the electric field strength is closely associated with the transition from the ideal EW region to the EW saturation. In addition, a reduction of the friction coefficient was observed when increasing the applied electric field in the ideal EW region. 相似文献
13.
An epoxy based thermosetting matrix was modified with poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) triblock copolymer, obtaining cured nanostructured thermosetting systems. Resulting systems were investigated using a novel atomic force microscopy (AFM) imaging mode, known as PeakForce quantitative nanomechanical property mapping (PeakForce QNM), that allows for the quantitative mapping of the local mechanical properties, such as adhesion and elastic modulus, together with the topography. It was demonstrated the capacity of this quantitative nanomechanical mapping to provide information on the local distribution of the elastic modulus, being able to distinguish between the mechanical properties of the two phases present in the analyzed thermosetting systems. 相似文献
14.
Brukman MJ Oncins Marco G Dunbar TD Boardman LD Carpick RW 《Langmuir : the ACS journal of surfaces and colloids》2006,22(9):3988-3998
Two phosphonic acid (PA) self-assembled monolayers (SAMs) are studied on three aluminum oxide surfaces: the C and R crystallographic planes of single crystal alpha-alumina (sapphire) and an amorphous vapor-deposited alumina thin film. SAMs are either fully hydrogenated CH3(CH2)17PO3H2 or semifluorinated CF3(CF2)7(CH2)11PO3H2. Atomic force microscope (AFM) topographic imaging reveals that the deposited films are homogeneous, atomically smooth, and stable for months in the laboratory environment. Static and advancing contact angle measurements agree with previous work on identical or similar films, but receding measurements suggest reduced coverage here. To enable reproducible nanotribology measurements with the AFM, a scanning protocol is developed that leads to a stable configuration of the silicon tip. Adhesion for the semifluorinated films is either comparable to or lower than that for the hydrogenated films, with a dependence on contact history observed. Friction between each film and the tips depends strongly upon the type of molecule, with the fluorinated species exhibiting substantially higher friction. Subtle but reproducible differences in friction are observed for a given SAM depending on the substrate, revealing differences in packing density for the SAMs on the different substrates. Friction is seen to increase linearly with load, a consequence of the tip's penetration into the monolayer. 相似文献
15.
Baofeng Cui Ling Zhang Huidi Zhou Junyan Zhang Jianmin Chen 《Surface and interface analysis : SIA》2011,43(11):1377-1381
Self‐assembled poly(amide amine)‐copper (PAMAM/Cu) film on silicon was prepared and investigated by means of contact angle measurement, XPS and atomic force microscopy (AFM). The tribological properties were evaluated using a reciprocal ball‐on‐disc test rig and a lateral force microscope. Results of XPS show the existence of Cu(0) and PAMAM molecule on the surface of the film. Compared with the self‐assembled monolayer of the poly(amide amine) generation 4.0 dendrimer, the friction force of PAMAM/Cu film is lower and the friction coefficient is smaller which can be attributed to the existence of Cu nanoparticles. The PAMAM/Cu film shows a good lubrication effect. The stability of friction and wear resistance of film is improved. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
16.
Gunter Moeller 《Journal of Polymer Science.Polymer Physics》2009,47(16):1573-1587
We used atomic force microscopy (AFM) nanoindentation to measure mechanical properties of polymers. Although AFM is generally acknowledged as a high‐resolution imaging tool, accurate quantification of AFM nanoindentation results is challenging. Two main challenges are determination of the projected area for objects as small as AFM tips and use of appropriate analysis methods for viscoelastic materials. We report significant accuracy improvements for modulus measurements when large end‐radius tips with appropriate cantilever stiffnesses are used for indentation. Using this approach, the instantaneous elastic modulus of four polymers we studied was measured within 30 to 40% of Dynamic Mechanical Analysis (DMA) results. The probes can, despite their size and very high stiffnesses, be used for imaging of very small domains in heterogeneous materials. For viscoelastic materials, we developed an AFM creep test to determine the instantaneous elastic modulus. The AFM method allows application of a nearly perfect stepload that facilitates data analysis based on hereditary integrals. Results for three polymers suggest that the observed creep in the materials has a strong plastic flow component even at small loads. In this respect, the spherical indenter tips behave like “sharp” indenters used in indentation studies with instrumented indenters. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1573–1587, 2009 相似文献
17.
Dufrêne YF 《The Analyst》2008,133(3):297-301
The nanoscale surface analysis of microbial cells represents a significant challenge of current microbiology and is critical for developing new biotechnological and biomedical applications. Using atomic force microscopy (AFM) topographic imaging, researchers can visualize the ultrastructure of live cells under physiological conditions and their subtle modifications upon cell growth or treatment with drugs. Chemical force microscopy, in which AFM tips are modified with specific functional groups, allows investigators to measure molecular forces and chemical properties of cell surfaces on a scale of only 25 functional groups. Molecular recognition imaging using AFM offers a means to localize specific receptors on cells, such as cell adhesion proteins or antibiotic binding sites. With this Highlight on AFM, it is hoped that more and more microbiologists and biophysicists will take advantage of this powerful, multifunctional nanotechnique. 相似文献
18.
Solmaz A Aytun T Deuschle JK Ow-Yang CW 《Langmuir : the ACS journal of surfaces and colloids》2012,28(28):10592-10596
Tapping mode atomic force microscopy (TM-AFM) enables mapping of chemical composition at the nanoscale by taking advantage of the variation in phase angle shift arising from an embedded second phase. We demonstrate that phase contrast can be attributed to the variation in elastic modulus during the imaging of zinc acetate (ZnAc)-loaded reverse polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) diblock co-polymer micelles less than 100 nm in diameter. Three sample configurations were characterized: (i) a 31.6 μm thick polystyrene (PS) support film for eliminating the substrate contribution, (ii) an unfilled PS-b-P2VP micelle supported by the same PS film, and (iii) a ZnAc-loaded PS-b-P2VP micelle supported by the same PS film. Force-indentation (F-I) curves were measured over unloaded micelles on the PS film and over loaded micelles on the PS film, using standard tapping mode probes of three different spring constants, the same cantilevers used for imaging of the samples before and after loading. For calibration of the tip geometry, nanoindentation was performed on the bare PS film. The resulting elastic modulus values extracted by applying the Hertz model were 8.26 ± 3.43 GPa over the loaded micelles and 4.17 ± 1.65 GPa over the unloaded micelles, confirming that phase contrast images of a monolayer of loaded micelles represent maps of the nanoscale chemical and mechanical variation. By calibrating the tip geometry indirectly using a known soft material, we are able to use the same standard tapping mode cantilevers for both imaging and indentation. 相似文献
19.
The mechanical properties of glassy films and glass surfaces have been studied using an atomic force microscope (AFM) through various imaging modes and measuring methods. In this paper, we discuss the viscoelastic response of a glassy surface probed using an AFM. We analyzed the force-distance curves measured on a glassy film or a glassy surface at temperatures near the glass transition temperature, Tg, using a Burgers model. We found that the material's characteristics of reversible anelastic response and viscous creep can be extracted from a force-distance curve. Anelastic response shifts the repulsive force-distance curve while viscous creep strongly affects the slope of the repulsive force-distance curve. When coupled with capillary force, due to the condensation of a thin layer of liquid film at the tip-surface joint, the anelasticity and viscous creep can alter the curve significantly in the attractive region. 相似文献
20.
Lehaf AM Hariri HH Schlenoff JB 《Langmuir : the ACS journal of surfaces and colloids》2012,28(15):6348-6355
Atomic force microscopy, AFM, and nanoindentation of polyelectrolyte multilayers, PEMUs, made from poly(diallyldimethylammonium), PDADMA, and poly(styrene sulfonate), PSS, provided new insight into their surface morphology and growth mechanism. A strong odd/even alternation of surface modulus revealed greater extrinsic (counterion-balanced) charge compensation for fully hydrated multilayers ending in the polycation, PDADMA. These swings in modulus indicate a much more asymmetric layer-by-layer growth mechanism than previously proposed. Viscoelastic properties of the PEMU, which may contribute to cell response, were highlighted by variable indentation rates and minimized by extrapolating to zero indentation rate, at which point the surface and bulk equilibrium moduli were comparable. Variations in surface composition were probed at high resolution using force mapping, and the surface was found to be uniform, with no evidence of phase separation. AFM comparison of wet and dry films terminated with PSS and PDADMA revealed much greater swelling of the PDADMA-terminated PEMU by water, with collapse of surface roughness features in dry conditions. Dynamic and static contact angle measurements suggested less rearrangement for the glassy PSS surface. 相似文献