Synthesis and Characterization of Titanium-doped Ordered Mesoporous Alumina

Titanium-doped ordered mesoporous alumina with specific structural properties has been prepared by the evaporation induced self-assembly sol-gel method. The results show that the doped titanium helps to stabilize the ordered mesoporous alumina material without influencing the ordered mesoporosity. The textural properties of the obtained sample are related to the amount of doped titanium. When the molar ratio of aluminum to titanium(n(Al)/n(Ti)) is controlled as 10.2, the titanium-doped ordered mesoporous alumina exhibits high surface area(up to 218 m2 g-1), large pore volume(0.42 cm3 g-1) and narrow pore diameter(6.1 nm) after treating at 900 ℃, showing high thermal stability. Moreover, the obtained sample calcined at 900 ℃ still maintains ordered mesoporous structure and exhibits high thermal stability.     

Synthesis of Ordered Biosilica Materials

Biogenic silica with amazing diversity of nanostructure shells,fibers and granules in diatoms and sponges is mediated by proteins and polysaccharides and forms at ambient pressure and temperatures.Chemical synthetic methods,in contrast,have to rely on extreme pH and /or surfactants to induce the condensation of silica precurors into specific patterns.One kind of benign synthesis method through plant cell wall template-directed ordered biosilica materials under ambient conditions in intriguing in this context.Organized silica materials in intercellular spaces of epidermal cells of tall fescue leaves were synthesized through molecular recognition between Si-OH and polysaccharide-OH or glycoprotein-OH of main components of plant cell walls and cellular processing as well when Si(OEt)4 was supplied rather than monosilicic acid.The biosynthesis of structural silica in tall fescue plant was correlated with the Si species applied,reflecting the slower condensation from tetraethoxysilane (TEOS) and thus providing greater opportunities for structural control by the underlying matrix of cell walls.The composition was estimated by energy dispersive X-ray(EDX) spectra on a scanning electron microscope.All organized structures showed carbon,oxygen and silicon peaks,indication that their formations differ from natural siliceous process.     

Preliminary Synthesis and Characterization of Mesoporous Nanocrystalline Zirconia

A novel method to prepare mesoporous nano-zirconia was developed. The synthesis was carried out in the presence of PEO surfactants via a solid-state reaction. The materials exhibit a strong diffraction peak at low 28 angle and their nitrogen adsorption/desorption isotherms are typical of type IV with H1 hysteresis loops. The pore structure imaged by TEM can be described as wormhole domains. The tetragonal zirconia nanocrystals are uniform in size (around 1.5 nm) and their mesopores focus on around 4.6 nm. The zirconia nanocrystal growth is tentatively postulated to be the result of an aggregation mechanism. This study also reveals that the PEO surfactants can interact with the Zr-O-Zr framework to reinforce the thermal stability of zirconia. The ratio of NaOH to ZrOC12, crystallization and calcination temperature play an important role in the synthesis of mesoporous nano-zirconia.     

Synthesis and Characterization of Ordered Mesoporous Aluminosilicate Molecular Sieves with High Stability in High-Temperature Steam

The ordered mesoporous aluminosilicate molecular sieve （MASMS-1） stable in the high-temperature steam has been successfully synthesized from the assembly of diluted ZSM-5-type precursor with mesoporous MCM-41. The material was characterized by XRD, N2 adsorption-desorption, FE-SEM, TEM, FT-IR spectroscopy and 27A1 MAS NMR techniques. This mesoporous material shows high stability in the high-temperature steam [H2O （φ=20%） in N2 at 800 ℃ for 4 h], which might be ascribed to the synergistic effect of both thick walls containing zeolite-like five-membered ring subunits and highly condensed surface silanol groups.     

Preparation and Characterization of Heparin‐Stabilized Gold Nanoparticles

A simple method for preparing gold nanoparticles in aqueous solution has been developed by using glycosaminoglycan‐heparin as reducing and stabilizing agent and HAuCl₄ as precursor. The obtained gold nanoparticles were characterized by UV‐vis spectroscopy, resonance light scattering spectroscopy (RLS), transmission electron microscopy (TEM) and electrophoresis technology. The influence of reactant concentration for the preparation of gold nanoparticles was investigated. The results indicated that the gold nanoparticles carried negative charges in the aqueous solution and the size and shape of the gold nanoparticles could be controlled by changing the concentration of the heparin. Moreover, the gold nanoparticles obtained with relatively high concentration of heparin were very stable and had relative narrow size distribution.     

Synthesis and Characterization of Fully-Functionalized Polysilanes for Photorefractive Materials

Photorefractive (PR) polymers have attracted much interest since 1991 1. Furthermore,because fully-functionalized polymeric systems can overcome the shortcomings such asphase-separation and composite sublimation in composite systems they have gainedespecial attention.Polysilanes can be used as novel photoconductors because of a-electionsdelocalization in the polymeric backbone2. Silence3 and Nishida4 have stUdied thepolysilane composite photorefractive materials and found that the response t…     

Facile Synthesis of 4‐Functionalized Cyclopentenones

1-8-Diazabicyclo[5.4.0]undec-7-ene(DBU)‐catalyzed Michael addition of nitroalkanes to dicyclopentadienone (1) followed by flash vacuum pyrolysis (FVP) provided a high‐yielding synthesis of extremely pure 4‐nitroalkyl cyclopentenones (3). The optimized Nef reaction of the nitro adducts (2) provided 4‐ketoalkyl cyclopentenones (5) in the similar way.     

Synthesis and Characterization of Novel Layered Lithium Sodium Silicate （Silinaite） and the Mesoporous Materials from Silinaite

Novel layered silinaite has been synthesized using an aqueous mixture of water glass, LiOH and NaOH under hydrothermal crystallization. Subsequently transformation of silinaite into mesoporous materials (SDM) was achieved at mild condition using cetyltrimethylammonium bromide as structure-directing agents. The resulting samples were characterized by XRD, SEM, FTIR nitrogen adsorption-desorption isotherms and catalytic performance in bulky molecular involved reaction. The results revealed that synthesized mesoporous materials derived from the silinaite exhibited an ordered hexagonal crystal structure with average pore diameter 2.7 nm and BET surface area 817m2/g. The SDM-supported ZnCl2 catalyst, prepared by impregnation-evaporation method, retained the mesoporous structure and showed high selectivity in alkylation of benzene with benzyl chloride.     

Size‐Controlled Synthesis of Highly Monodisperse Gold Nanoparticles without a Size‐Selection and Long Range Ordered 2‐D Arrangement

A simple method is used to control the size of cetyltrimethylammoniumbromide‐protected Au nanoparticles by a reversal micelle in safe organic solvent. These Au nanoparticles can be evolved to highly monodisperse Au nanoparticles capped 1‐dodecanthiol in the 2, 3, and 5 nm diameter by refluxing at～160°C for 7 hours. Their ultraviolet visible spectroscopy (UV‐vis), x‐ray diffraction (XRD, transmission electron microscopy (TEM) showed that all the three different size gold nanoparticles(NPs) displayed high size homogenous properties and easy formed large areas of long ordered two‐dimensional arrangement at the air/solid interface.     

Self‐assembly of Functionalized Gold Nanoparticles with Rigid and Flexible Multifunctional Linkers

The interparticle spacing of carboxyl functionalized gold nanoparticles (Au‐COOH) were mediated by rigid crosslinkers, octa(3‐aminopropyl)octasilsesquioxane (POSS‐NH₃ ⁺) and poly(amidoamine) dendrimer terminated with hydroxyl groups (PAMAM‐OH), and a flexible polymeric linker, poly(hexanul viologen) (6‐VP). Regular interparticle spacing was achieved by utilizing POSS‐NH₃ ⁺ and PAMAM‐OH dendrimer as cross linkers, whereas size growth of Au‐COOH was observed featuring no interparticle spacing by utilizing 6‐VP as the crosslinker.     

Synthesis and Characterization of N‐methylenephenyl Phosphonic Chitosan

Chitosan is a natural based polymer obtained by alkaline deacetylation of chitin, exhibiting excellent properties such as non‐toxicity, biocompatibility and biodegradability. N‐Methylenephenyl phosphonic chitosan (NMPPC) is synthesized from chitosan by reacting with phenyl phosphonic acid using formaldehyde. The NMPPC was characterized by FTIR, ³¹P‐NMR, X‐ray diffraction, scanning electron microscopy, thermogravimeteric analysis and solubility studies. A significant decrease of molecular weight was observed in the NMPPC. The TGA studies suggested that NMPPC has less thermal stability than chitosan. The X‐ray diffraction analysis showed that NMPPC was amorphous in nature. The solubility property of the polymer was improved after the incorporation of a phenyl phosphonic group.     

Microwave‐Assisted Synthesis and Characterization of CuO Nanocrystals

CuO feather‐like and flower‐like crystals have been synthesized by a fast microwave‐assisted solution approach using Cu(NO₃)₂ and NaOH. The morphology transformation of CuO could be achieved by ionic liquid 1‐n‐butyl‐3‐methyl imidazolium tetrafluoroborate ([BMIM]BF₄). With [BMIM]BF₄, flower‐like CuO were obtained, whereas without [BMIM]BF₄, feather‐like CuO were obtained. The possible formation mechanism of flower‐like CuO was discussed on the basis of experimental results. The products were characterized by XRD, FESEM/EDS, and TEM/SAED. In addition, the adsorption of [BMIM]BF₄ on flower‐like CuO was confirmed by FTIR and TG/DSC, and the band gap energies of the flower‐like CuO was estimated by UV‐vis spectra.     

Microwave‐Assisted Solid‐State Synthesis and Characterization of Thiohydantoin Derivatives

Abstract

A new and efficient solid‐state method for the preparation of thiohydantoins is reported. With this method, twelve thiohydantoin compounds have been synthesized in good to excellent yields (81–92%). In addition, this method has the advantages of high yields, a cleaner reaction, simple methodology, and short reaction times.     

Synthesis and Characterization of H‐bonded Side‐Chain Liquid‐Crystalline Polysiloxanes

Smectic Liquid‐crystalline (LC) polysiloxanes P1～P7 were prepared using cholesteryl 6‐undec‐10‐enoyloxy‐naphthalene‐2‐carboxylate and cholesteryl 3‐sulfo‐4‐undec‐10‐enoyloxy‐benzoate in a one‐step reaction with sulfonic acid group contents ranging between 0 and wt 4.39%. With an increase of sulfonic acid groups, the glass transition temperature rose slightly; while the temperature of clear point decreased. As sulfonic groups increased, H‐bonding interaction strengthened, resulting in an increase of glass transition temperature. On the other hand, aggregates of H‐bond derived from sulfonic acids would destroy the homogeneous rigid moieties and the high‐ordered structure, resulting in a temperature of clear point decreased. In X‐ray measurement, all the polymers displayed sharp strong peaks around 2θ≈2.6° and broad peaks around 2θ ≈16.6°. The broad peaks at wide‐angle are similar, but there is great different at low angles. For the polymer without sulfonic acid, the only one strong peak at low angle indicates high‐ordered lamellar structure due to homogeneous rigid moieties. For the polymers containing more sulfonic acid, two sharp peaks appeared at low angles, and the intensities of these two peaks varied. With increase of sulfonic acid groups in the polymer systems, the hydrogen‐bonding aggregates in domains would divide the homogeneous rigid mesogens into two kinds of nanophases, that is, one containing non H‐bond mesogens and another involving H‐bonding aggregated mesogens. These two different nanophases result in different lamellar spacings.     

Hydrothermal Synthesis and Characterization of Quasi‐1‐D Tungsten Disulfide Nanocrystal

Quasi‐1‐D (one‐dimensional) tungsten disulfide (WS₂) nanocrystal was synthesized through a two‐step hydrothermal process. Energy dispersive spectroscopy (EDS) identified that the chemical composition of the final product was WS₂. The produced nanocrystal was further characterized with X‐ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The results have shown that most of the products are quasi‐1‐D nanocrystals with the width around 140 nanometers and thickness about 30 nanometers. However, the length of the majority of nanocrystals could reach 1 micron. The selected area electron diffraction (SAED) pattern indicates that the nanocrystal is of a single crystal. N₂ adsorption measurement revealed that the BET specific surface area of this sample is 97 m²g^?1, which indicates that the as‐prepared product has better catalyzing and friction performance.     

Titanium-Containing Mesoporous Materials：Synthesis and Application in Selective Catalytic Oxidation

Titanium-containing mesoporous molecular sieves are of great significance in selective catalytic oxidation processes with bulky molecules. Recent researches and developments on the designing and synthesis of Ti-containing mesoporous materials have been reviewed. Various strategies for the preparation of Ti-containing rnesoporous materials, such as direct synthesis and post-synthesis, are described. Modifications of Ti-containing mesoporous materials by surface-grafting and atom-planting are also discussed. All approaches aimed mainly at the improving of the stability, the hydrophobicity, and mostly the catalytic activity. Structural and mechanistic features of various synthetic systems are discussed. Ti-containing mesoporous materials in liquid phase catalytic oxidation of organic compounds with H2O2 as an oxidant is briefly summarized, showing their broad utilities for green synthesis of fine chemicals by catalytic oxidative reactions.     

Synthesis and Characterization of AmmoniumMolybdostibophosphate

以简单酸铵盐为原料，采用不同的磷钼锑比，在控制反应温度７０～８０℃、溶液酸度２．５～３．０Ｎ的条件下，进行分步反应的方法，首次合成了以锑原子取代的钼锑磷杂多酸铵。通过元素分析，确定了它们的组成；用ｐＨ滴定曲线、电子吸收光谱和Ｘ射线等方法研究了它们的性质。     

Gallery-templated Synthesis of Titanium／Silicon -containing Mesoporous Montmorillonite-based Catalytic Materials

A mesoporous titanium/silicon -containing montmorillonite-based catalytic materials has been synthesized by novel gallery-templated techniques. XRD, SEM, framework IR, and N2 adsorption-desorption isotherms provided evidence of the formation of Si/Ti pillars. The synthetic materials show potential catalytic application for hydroxylation of phenol with peroxide.     

Synthesis and Characterization of Hydroxyl‐Terminated Poly(γ‐benzyl‐L‐glutamate)

In order to provide an active end group of hydroxyl group and improve the hydrophility of poly(γ‐benzyl‐L‐glutamate) (PBLG), ethanolamine (EA) was utilized as the initiator to initiate N‐carboxy‐γ‐benzyl‐L‐glutamate anhydride (Bz‐L‐Glu‐NCA) polymerization. The prepared hydroxyl‐terminated PBLG (HO‐PBLG) was fully characterized by FTIR, ¹H‐NMR, XPS, XRD, DSC, and GPC. The results of FTIR and XRD indicated that the chain conformation of HO‐PBLG predominantly presented α‐helix. The water contact angle was measured to confirm that the hydrophilicity was improved by the introduction of hydroxyl group. Chondrocytes studies showed that the cells attachment efficiency on the HO‐PBLG film was good and the cells grew well.     

Synthesis and NMR Characterization of Multi‐hydroxyl End‐groups PEG and PLGA‐PEG Barbell‐like Copolymers

Multi‐hydroxyl end‐groups poly(ethylene glycol) (PEG) was prepared from PEG and epichlorohydrin. Then, PEG‐supported poly(lactic‐ran‐glycolic acid) (PLGA)_n‐PEG‐(PLGA)_n (n=1, 2, 4) linear‐dendritic barbell‐like copolymers were synthesized through direct polycondensation under bulk condition from the multi‐hydroxyl end‐groups PEG, lactic acid and glycolic acid. Arm numbers were varied, with 2, 4 and 8, by using bis‐, tetra‐, and octa‐hydroxyl end‐groups PEG, respectively. The chemical structures, absolute number‐average molecular weight, the monomer units per single arm and the molar ratio of hydroxyl acid monomer units of the (PLGA)_n‐PEG‐(PLGA)_n barbell‐like copolymers were analyzed by NMR spectroscopy. The result indicated that the structures of the multi‐hydroxyl end‐groups PEG and (PLGA)_n‐PEG‐(PLGA)_n barbell‐like copolymers were consistent with design. Compared with the theoretical values, molecular weights determined by ¹H‐NMR end‐group analysis gave reasonably consistent values, but the values determined by gel permeation chromatography (GPC) were considerably less than theoretical values. The results indicated that (PLGA)_n‐PEG‐(PLGA)_n copolymers have linear‐dendritic structures.