Use of a surfactant in the determination of arsenic by flow injection hydride generation atomic absorption spectrometry

The possible benefits of the addition of an anionic surfactant, didodecyldimethylammonium bromide, in the determination of arsenic, by flow injection hydride generation atomic absorption spectrometry using a flame-heated quartz tube atomizer, were studied in the light of previous reports concerning the effects of surfactants on chemical vapor generation procedures. Concentrations of arsenic between 5 and 30 μg l⁻¹ were used. Calibrations in the presence and absence of the surfactant in the sample solution were not significantly different, either for the case where vesicles were formed in the presence of the analyte or where they were preformed in the surfactant solution and then added to the analyte. The surfactant had no effect on recoveries in the presence of copper, nickel or bismuth. The addition of the surfactant to the acid carrier and/or borohydride streams had no effect. It is proposed that there may be a greater role for surfactants in the improvement of the processes by which the hydride is transferred to the bulk gas phase than has been attributed in previous reports on this subject.     

Direct electrochemistry of heme proteins: effect of electrode surface modification by neutral surfactants

Direct electrochemical studies on horse heart myoglobin and horseradish peroxidase (HRP) have been carried out using tin-doped indium oxide (ITO) and surfactant modified glassy carbon working electrodes. These proteins show very slow electron transfer kinetics at metal or untreated electrodes. Moreover, small amounts of surface-active impurity were drastically affects the electrode reaction of these proteins. The results showed that modification of the electrode surface with neutral surfactants significantly improves the electrochemical response of myoglobin as well as of HRP. The electrode response was found to depend on the structure of the surfactants. The amount of surfactant required per unit area of the electrode surface to promote the maximum electron transfer rate constants was found to be constant. This indicated that the surfactant molecules interacted with the electrode surface in a specific manner and anchored the protein molecules to align in the suitable orientation. The hydrophobicity of the surfactants rather than their charge was found to be crucial in promoting the electrode response of these proteins at the glassy carbon electrode.     

Effect of surfactants on the kinetics of nickel(II) extraction by 2-hydroxy-5-nonylacetophenone oxime (LIX 84) in an n-heptane/water system

The initial reaction rates of the extraction of nickel(II) by 2-hydroxy-5-nonylacetophenone oxime (HNAPO) in a two-phase oil/water system was measured using a total internal reflectance static transfer cell. A two-step reaction mechanism between nickel(II) and HNAPO was found to satisfactorily explain the observed initial reaction rate (R(int)). The addition of neutral surfactants, nonionic octaethylene glycol mono-n-dodecyl ether and zwitterionic n-dodecyldimethyl-3-ammonio-1-propanesulfonate, decreased R(int), which could be accounted for with a competitive surface adsorption model. The presence of the anionic surfactant sodium dodecyl sulfate accelerated and then decelerated R(int), while the cationic surfactant dodecyltrimethylammonium chloride caused a decrease. The effects of these charged surfactants were accounted for using a combination of a competitive surface adsorption model and the Boltzmann distribution of charged species.     

Adsorption of insoluble surfactants at the Au(111)/solution interface

The adsorption of surfactants, which form insoluble monolayers on an aqueous substrate, onto a single crystal gold electrode have been described. Adsorption of this class of surfactants have been characterized using a combination of electrochemistry and Langmuir-Blodgett techniques. We have developed a technique to simultaneously measure the film pressure at the gas-solution (GS) interface and the film pressure of the surfactants that spread to the metal-solution (MS) interface. We have shown that surfactants such as octadecanol and stearic acid, which interact weakly with the metal surface, adsorb at an uncharged MS interface (at the potential of zero charge) and progressively desorb when the electrode surface is charged negatively. The electrode potential (charge density at the metal surface) influences the transfer of the surfactant from the GS interface to the MS interface. The transfer ratio is 1:1 at an uncharged MS interface, and is progressively reduced to zero when the MS interface is charged. We have employed 12-(9-anthroloxy) stearic acid, a surfactant dye molecule, to study the mechanism of potential induced desorption and adsorption of the film of insoluble molecules. With the help of electroreflectance spectroscopy and light scattering measurements, we have shown that if desorbed, the surfactant molecules form micelles (flakes or vesicles) that are trapped under the electrode surface. The micelles spontaneously spread back onto the electrode surface when the charge density at the metal approaches zero. The repeatable desorption and readsorption involve micellisation of the film at negative potentials and spontaneous spreading of the micelles to reform the monolayer at potentials close to pzc.     

Role of adsorbed surfactant in the reaction of aryl diazonium salts with single-walled carbon nanotubes

Because covalent chemistry can diminish the optical and electronic properties of single-walled carbon nanotubes (SWCNTs), there is significant interest in developing methods of controllably functionalizing the nanotube sidewall. To date, most attempts at obtaining such control have focused on reaction stoichiometry or strength of oxidative treatment. Here, we examine the role of surfactants in the chemical modification of single-walled carbon nanotubes with aryl diazonium salts. The adsorbed surfactant layer is shown to affect the diazonium derivatization of carbon nanotubes in several ways, including electrostatic attraction or repulsion, steric exclusion, and direct chemical modification of the diazonium reactant. Electrostatic effects are most pronounced in the cases of anionic sodium dodecyl sulfate and cationic cetyltrimethylammonium bromide, where differences in surfactant charge can significantly affect the ability of the diazonium ion to access the SWCNT surface. For bile salt surfactants, with the exception of sodium cholate, we find that the surfactant wraps tightly enough such that exclusion effects are dominant. Here, sodium taurocholate exhibits almost no reactivity under the explored reaction conditions, while for sodium deoxycholate and sodium taurodeoxycholate, we show that the greatest extent of reaction is observed among a small population of nanotube species, with diameters between 0.88 and 0.92 nm. The anomalous reaction of nanotubes in this diameter range seems to imply that the surfactant is less effective at coating these species, resulting in a reduced surface coverage on the nanotube. Contrary to the other bile salts studied, sodium cholate enables high selectivity toward metallic species and small band gap semiconductors, which is attributed to surfactant-diazonium coupling to form highly reactive diazoesters. Further, it is found that the rigidity of anionic surfactants can significantly influence the ability of the surfactant layer to stabilize the diazonium ion near the nanotube surface. Such Coulombic and surfactant packing effects offer promise toward employing surfactants to controllably functionalize carbon nanotubes.     

Single-chain surfactant monolayer on carbon paste electrode and its application for the studies on the direct electron transfer of hemoglobin

A variety of single-chain surfactants with different charge properties and tail lengths can spontaneously adsorb on the hydrophobic surface of carbon paste electrode and form stable monolayers on the electrode surface. Hemoglobin (Hb) was successfully immobilized on these surfactant monolayers to form stable protein-surfactant composite films regardless of the charge and the tail length of surfactants. The resulting surface-confined Hb exhibited well-defined direct electron-transfer behaviors in all positively, neutrally and negatively charged surfactant films, suggesting the important role of hydrophobic interactions in the adsorption of Hb on surfactant films. When the density of surfactant monolayers was controlled to be the same, Hb was found to possess a better direct electron-transfer behavior on monolayers of cationic surfactants with a longer tail length. This, in combination with the tunneling effect in the direct electron transfer of Hb on surfactant films, demonstrated that the adsorption of Hb on surfactant monolayers may be mainly achieved by the partial intercalation of Hb in the loose structures of surfactant films through hydrophobic interactions between the alkane chains of surfactants and the hydrophobic regions of Hb. The native conformation of Hb adsorbed on these surfactant films was proved to be unchanged, reflected by the unaltered ultraviolet-visible (UV-vis) and reflection-absorption infrared (RAIR) spectra, and by the catalytic activity toward hydrogen peroxide (H(2)O(2)) and nitric oxide (NO) in comparison with the free Hb molecules.     

Understanding surfactant/graphene interactions using a graphene field effect transistor: relating molecular structure to hysteresis and carrier mobility

Manipulation of transport hysteresis on graphene transistors and understanding electron transfer between graphene and polar/ionic adsorbates are important for the development of graphene-based sensor devices and nonvolatile memory electronics. We have investigated the effects of commonly used surfactants for graphene dispersion in aqueous solution on transport characteristics of graphene transistors. The adsorbates are found to transfer electrons to graphene, scatter carrier transport, and induce additional electron-hole puddles when the graphene is on an SiO(2) substrate. We relate the change in transport characteristics to specific chemical properties of a series of anionic, cationic, and neutral surfactants using a modification of a self-consistent transport theory developed for graphene. To understand the effects of surfactant adsorbates trapped on either side of the graphene, suspended devices were fabricated. Strong hysteresis is observed only when both sides of the graphene were exposed to the surfactants, attributable to their function as charge traps. This work is the first to demonstrate the control of hysteresis, allowing us to eliminate it for sensor and device applications or to enhance it to potentially enable nonvolatile memory applications.     

表面活性剂对共轭聚合物荧光性质及电荷转移的影响

探讨了表面活性剂存在下, 水溶性阴离子共轭聚合物聚[5-甲氧基-2-(3-磺酰化丙氧基)-1,4-苯撑乙烯](简写为MPS-PPV)的微环境变化对荧光性质及电荷转移的影响. 结果表明, 阳离子表面活性剂及非离子表面活性剂使MPS-PPV荧光增强, 阴离子表面活性剂使其荧光先增强后减弱; 在MPS-PPV/表面活性剂体系中加入电子接受体Pd^2＋, 发现非离子表面活性剂体系的荧光猝灭效率提高, 阴离子及阳离子表面活性剂体系荧光猝灭效率下降. 此研究对研制基于阴离子共聚物的新型生物化学传感器具有一定的指导意义.     

Negative kinetic temperature effect on the hydride transfer from NADH analogue BNAH to the radical cation of N-benzylphenothiazine in acetonitrile

The reaction rates of 1-(p-substituted benzyl)-1,4-dihydronicotinamide (G-BNAH) with N-benzylphenothiazine radical cation (PTZ(*+)) in acetonitrile were determined. The results show that the reaction rates (k(obs)) decreased from 2.80 x 10(7) to 2.16 x 10(7) M(-1) s(-1) for G = H as the reaction temperature increased from 298 to 318 K. The activation enthalpies of the reactions were estimated according to Eyring equation to give negative values (-3.4 to -2.9 kcal/mol). Investigation of the reaction intermediate shows that the charge-transfer complex (CT-complex) between G-BNAH and PTZ(*+) was formed in front of the hydride transfer from G-BNAH to PTZ(*+). The formation enthalpy of the CT-complex was estimated by using the Benesi-Hildebrand equation to give the values from -6.4 to -6.0 kcal/mol when the substituent G in G-BNAH changes from CH(3)O to Br. Detailed thermodynamic analyses on each elementary step in the possible reaction pathways suggest that the hydride transfer from G-BNAH to PTZ(*+) occurs by a concerted hydride transfer via a CT-complex. The effective charge distribution on the pyridine ring in G-BNAH at the various stages-the reactant G-BNAH, the charge-transfer complex, the transition-state, and the product G-BNA(+)-was estimated by using the method of Hammett-type linear free energy analysis, and the results show that the pyridine ring carries relative effective positive charges of 0.35 in the CT-complex and 0.45 in the transition state, respectively, which indicates that the concerted hydride transfer from G-BNAH to PTZ(*+) was practically performed by the initial charge (-0.35) transfer from G-BNAH to PTZ(*+) and then followed by the transfer of hydrogen atom with partial negative charge (-0.65). It is evident that the present work would be helpful in understanding the nature of the negative temperature effect, especially on the reaction of NADH coenzyme with the drug phenothiazine in vivo.     

添加剂对非离子十二烷基聚氧乙烯聚氧丙烯醚浊点的影响

测定了无机盐、单元及多元醇、有机酸及离子型表面活性剂对3种非离子表面活性剂十二烷基聚氧乙烯聚氧丙烯醚C₁₂H₂₅(EO)_m(PO)_nH(LS₃₆,m=3,n=6;LS45,m=4,n=5;LS54,m=5,n=4)浊点的影响.     

Conversion and origin of normal and abnormal temperature dependences of kinetic isotope effect in hydride transfer reactions

The effects of substituents on the temperature dependences of kinetic isotope effect (KIE) for the reactions of the hydride transfer from the substituted 5-methyl-6-phenyl-5,6-dihydrophenanthridine (G-PDH) to thioxanthylium (TX(+)) in acetonitrile were examined, and the results show that the temperature dependences of KIE for the hydride transfer reactions can be converted by adjusting the nature of the substituents in the molecule of the hydride donor. In general, electron-withdrawing groups can make the KIE to have normal temperature dependence, but electron-donating groups can make the KIE to have abnormal temperature dependence. Thermodynamic analysis on the possible pathways of the hydride transfer from G-PDH to TX(+) in acetonitrile suggests that the transfers of the hydride anion in the reactions are all carried out by the concerted one-step mechanism whether the substituent is an electron-withdrawing group or an electron-donating group. But the examination of Hammett-type free energy analysis on the hydride transfer reactions supports that the concerted one-step hydride transfer is not due to an elementary chemical reaction. The experimental values of KIE at different temperatures for the hydride transfer reactions were modeled by using a kinetic equation formed according to a multistage mechanism of the hydride transfer including a returnable charge-transfer complex as the reaction intermediate; the real mechanism of the hydride transfer and the root that why the temperature dependences of KIE can be converted as the nature of the substituents are changed were discovered.     

Electrokinetic behavior and colloidal stability of polystyrene latex coated with ionic surfactants

This work is focused on analyzing the electrokinetic behavior and colloidal stability of latex dispersions having different amounts of adsorbed ionic surfactants. The effects of the surface charge sign and value, and the type of ionic surfactant were examined. The analysis of the electrophoretic mobility (mu(e)) versus the electrolyte concentration up to really high amounts of salt, much higher than in usual studies, supports the colloidal stability results. In addition, useful information to understand the adsorption isotherms was obtained by studying mu(e) versus the amount of the adsorbed surfactant. Aggregation studies were carried out using a low-angle light scattering technique. The critical coagulation concentrations (ccc) of the particles were obtained for different surfactant coverage. For latex particles covered by ionic surfactants, the electrostatic repulsion was, in general, the main contribution to the colloidal stability of the system; however, steric effects played an important role in some cases. For latices with not very high colloidal stability, the adsorption of ionic surfactants always improved the colloidal stability of the dispersion above certain coverage, independently of the sign of both, latex and surfactant charge. This was in agreement with higher mobility values. Several theoretical models have been applied to the electrophoretic mobility data in order to obtain different interfacial properties of the complexes (i.e., zeta potential and density charge of the surface charged layer).     

大离子诱导聚电解质/表面活性剂复合物的解离

采用分子动力学模拟方法研究了大离子与聚电解质/表面活性剂复合物的相互作用, 考察了大离子的电性、直径、表面电荷、浓度等对其与复合物相互作用的影响. 结果表明, 与聚电解质所带电性相同的大离子对复合物作用不明显, 只有当大离子所带电荷较多时, 才会引导少量表面活性剂从复合物中脱离. 当大离子所带电荷与聚电解质所带电荷电性相反时, 大离子的加入会诱导复合物的解离, 表面活性剂从复合物中释放出来, 甚至导致聚电解质/表面活性剂复合物的完全解离, 从而形成聚电解质/大离子复合物; 大离子所带电荷越多, 诱导作用越明显. 大离子的直径及浓度对其与复合物之间的作用也有很大的影响, 对于所带电荷数相同的大离子而言, 直径越小, 其与复合物的作用越显著, 越容易引导表面活性剂从复合物中解离, 若大离子的表面电荷密度相同, 大离子直径越小, 反而与复合物的作用越弱; 大离子浓度越高, 越易引起复合物的解离, 复合物中聚电解质链上结合的大离子数增多直至饱和, 相应的会出现电荷反转现象.     

Fluorescence probing of albumin-surfactant interaction

Protein-surfactant interactions were studied using bovine serum albumin (BSA) and the three surfactants sodium dodecyl sulfate (SDS), cetyltrimethylammonium bromide (CTAB), and poly(oxyethylene)isooctyl phenyl ether (TX-100). The surfactants used belong to three broad classes, i.e., anionic, cationic, and nonionic. These categories of surfactants were used to elucidate the mechanism of surfactant binding to BSA, at pH 7. The interactions were followed fluorimetrically using both intrinsic tryptophan (Trp) fluorescence and the fluorescence of an external label. The aggregation behavior of the surfactants were studied in the presence of BSA. Steady-state fluorescence studies indicate that all three surfactants bind to BSA in a cooperative manner. This cooperative binding affects the binding of the external label to BSA. All these effects are also manifested in time-resolved fluorescence studies. The effects of surfactants on acrylamide quenching and energy transfer from Trp in BSA to bound dye provided valuable insights into the structural modification of BSA in presence of surfactants. The surfactant-induced conformational change of BSA was also confirmed by circular dichroism studies. However, among the three categories of surfactants, the nonionic surfactant shows the least interaction with BSA.     

Charge-Transfer Chromatographic Study on the Interaction of Nonhomologous Series of Nonionic Surfactants with Heptakis(2,6-di-O-methyl)-β-cyclodextrin

Abstract

The interaction of 38 nonionic surfactants containing various hydrophobic moieties with dimethyl-β-cyclodextrin (DIMEB) was studied by charge transfer chromatography. DIMED modified the retention behaviour of each surfactant, however, the strength of interaction varied considerably. Both the lipophilicity and specific hydrophobic surface area of surfactants significantly influenced the strength of interaction. The presence of ester bond and double bond in the hydrophobic moiety of surfactants has impact on the complex formation.     

The interplay of hydrophobic and electrostatic effects in the surfactant-induced aggregation/deaggregation of chlorin p6

The aggregation/deaggregation of chlorin p6 with the surfactants CTAB, SDS, and TX 100 have been studied by using absorption, fluorescence, and light scattering techniques. The ionic surfactants are found to cause aggregation of fluorophore at submicellar concentrations. The aggregates dissolve at higher surfactant concentrations to yield micellized monomers. This is rationalized by the interplay of electrostatic and hydrophobic effects. A prominent pH effect is observed in the ionic surfactant induced aggregation process as the charge on the fluorophore is controlled by the pH of the medium. Interestingly, the neutral TX-100 also induces aggregation of chlorin p6 at low concentrations, indicating that hydrophobic effects by themselves can cause aggregation unless there is a hindrance by repulsive electrostatic effects.     

Interactions of polyelectrolyte brushes with oppositely charged surfactants

Using Brownian dynamics simulations, we study the effect of the charge ratio, the surfactant length, and the grafting density on the conformational behavior of the complex formed by the polyelectrolyte brush with oppositely charged surfactants. In our simulations, the polyelectrolyte chains and surfactants are represented by a coarse-grained bead-spring model, and the solvent is treated implicitly. It is found that varying the charge ratio induces different morphologies of surfactant aggregates adsorbed onto the brush. At high charge ratios, the density profiles of surfactant monomers indicate that surfactant aggregates exhibit a layer-by-layer arrangement. The surfactant length has a strong effect on the adsorption behavior of surfactants. The lengthening of surfactant leads to a collapsed brush configuration, but a reswelling of the brush with further increasing the surfactant length is observed. The collapse of the brush is attributed to the enhancement of surfactants binding to polyelectrolyte chains. The reswelling is due to an increase in the volume of adsorbed surfactant aggregates. At the largest grafting density investigated, enhanced excluded volume interactions limit the adsorption of surfactant within the polyelectrolyte brush. We also find that end monomers in polyelectrolyte chains exhibit a bimodal distribution in cases of large surfactant lengths and high charge ratios.     

Influence of surfactant on gas bubble stability

Gas-bubble stability is achieved either by a reduction in the Laplace pressure or by a reduction in the permeability of the gas-liquid interface. Although insoluble surfactants have been shown definitively in many studies to lower the permeability of the gas-liquid interface and hence increase the resistance to interfacial mass transfer, remarkably little work has been done on the effects of soluble surfactants. An experimental system was developed to measure the effect of the soluble surfactant dodecyl trimethylammonium bromide on the desorption and absorption of carbon dioxide gas through a quiescent planar interface. The desorption experiments conformed to the model of non-steady-state molecular diffusion. The absorption experiments, however, produced an unexpected mass transfer mechanism, with surface renewal, probably because of instability in the density gradient formed by the carbon dioxide. In general, the soluble surfactant produced no measurable reduction in the rate of interfacial mass transfer for desorption or absorption. This finding is consistent with the conclusion of Caskey and Barlage that soluble surfactants produce a significantly lower resistance to interfacial mass transfer than do insoluble surfactants. The dynamic adsorption and desorption of the surfactant molecules at the gas-liquid interface creates short-term vacancies, which presumably permit the unrestricted transfer of the gas molecules through the interface. This surfactant exchange does not occur for insoluble surfactants. Gas bubbles formed in the presence of a high concentration of soluble surfactant were observed to dissolve completely, while those formed in the presence of the insoluble surfactant stearic acid did not dissolve easily, and persisted for very long periods. The interfacial concentration of stearic acid rises during bubble dissolution, as it is insoluble, and must eventually achieve full monolayer coverage and a state of compression, lowering the permeability of the interface. Thus, insoluble surfactants or hydrophobic impurities from solid surfaces may account for increased bubble stability.     

Influence of the surfactant chain length on the fluorescence properties of a water-soluble conjugated polymer

In this work, we report the influence of surfactant chain length and surfactant concentration on the photoluminescence (PL) of water-soluble pi-conjugated poly(thienyl ethylene oxide butyl sulfonate) (PTE-BS). We have used alkylammomium surfactants with 8, 9, 10, and 12 carbon atoms per hydrocarbon chain. The surfactant concentration was varied from 0.125 the critical micelle concentration (CMC) up to 2 times the CMC. The results show that at premicellar concentrations all the surfactants promote the polymer aggregation inducing an increase in the interchain charge transfer by pi-pi interactions, which competes with PL emission processes. However, in the premicellar range, the polymer PL emission is sharply affected by the surfactant chain length. Thus, the PL is quenched by the surfactants with the shortest tails, whereas the surfactants with the longest ones provoke an enhancement of the PL emission. This behavior has been associated with the capacity of the surfactants with the longest hydrocarbon chains to accommodate their tails inside the polymer, obstructing the appearance of pi-pi interchain interactions during aggregation and reducing intrachain defects. By contrast, at the CMC, the surfactant chain length does not modify the PL emission, since the excess of surfactant inhibits polymer aggregation, thus enhancing the efficiency of light emissive processes.     

Electrostatic binding of oppositely charged surfactants to spherical polyelectrolyte brushes

We use Brownian dynamics (BD) simulations to investigate the formation and structural characteristics of the complex between a spherical polyelectrolyte brush (SPB) and oppositely charged surfactants. Increasing the amount of added surfactants leads to a collapsed conformation of the SPB and the number of adsorbed surfactants exhibits a linear dependence. Nevertheless, the surfactant uptake into the SPB does not increase with further addition of surfactants. It is found that the surfactant length has a strong influence on the SPB conformation and the adsorption properties of surfactant. Upon changing the surfactant length from 3 to 11, the SPB undergoes a swelling-deswelling-reswelling conformational transition. The brush deswelling is due to the increase in the surfactant uptake. The increasing size of adsorbed aggregates is a main reason for reswelling of the SPB. A non-linear relationship between the brush thickness and the grafting density is observed. Especially at intermediate grafting densities, increasing the number of grafted chains has a weak effect on the brush thickness. We also find that a completely collapsed brush conformation occurs at high surfactant/SPB charge ratios or large surfactant lengths, while the brush layer is in a partly collapsed or extended state at an intermediate charge ratio and surfactant length.