The Influence of Sodium Phosphate on Extraction Phenomena of Aqueous Two‐Phase Cationic/Anionic Surfactant Systems

The phase behavior of dodecyltrimethylammonium bromide (DTAB)/sodium dodecyl sulfonate (AS)/H₂O system in the presence and in the absence of sodium phosphate has been studied. Two kinds of aqueous two‐phase systems (ATPSs) were formed, one is ATPS‐A in which anionic surfactant is in excess, the other is ATPS‐C in which cationic surfactant is in excess. For the CTAB/AS/H₂O system, the addition of sodium phosphate changes the extraction phenomena of both ATPS‐A and ATPS‐C. For the DTAB/AS/H₂O system, the addition of sodium phosphate changes the extraction phenomena of ATPS‐C. For ATPS‐C, the addition of trivalent PO₄ ^3? results in a strong extraction effect of ATPS‐C to cationic water‐soluble dye methylene blue.     

Salt Effects on Aqueous Cationic/Anionic Surfactant Two‐Phase Regions

The influence of added salts (KCl, NaF, NaCl, NaBr, Na₂SO₄, Na₃PO₄) on aqueous cetyltrimethylammonium bromide (CTAB)/sodium dodecyl sulfonate (AS) two‐phase regions were studied. For KCl, the concentration dependence of salt effect on aqueous two‐phase regions was investigated. When brine substitutes pure water as a solvent, the positions of aqueous two‐phase regions in the phase diagram change. The results indicate that for aqueous two‐phase systems with excess anionic surfactant (ATPS‐A), the salt effect was mainly dependent on the cationic inorganic counterions, whereas for aqueous two‐phase systems with excess cationic surfactant (ATPS‐C), the salt effect was mainly dependent on the anionic inorganic counterions. The shift of aqueous two‐phase region is strengthened following the Hofmeister series. All the experiments were performed at 318.15 K.     

Phase Behavior and Densities of Aqueous Two‐Phase Systems Formed by 1,3‐Propanediyl bis(dodecyl dimethylammonium bromide) and Sodium Dodecyl Sulfonate Mixtures

Phase behavior of aqueous mixed surfactants, 1,3‐propanediyl bis(dodecyl dimethylammonium bromide) and sodium dodecyl sulfonate, has been studied at 318.15 K. The influence of added sodium halides (NaF, NaCl, and NaBr) has been investigated. For those systems studied, only one aqueous two‐phase region is formed in which cationic gemini surfactant is in excess. Different salt effects on the densities of the concentrated phases in aqueous two‐phase systems were observed for the three sodium halides. Density experiments indicate that contributions of various ions and water to the density of the solutions are near additive. Whether the concentrated phases in aqueous two‐phase systems are the bottom phases with higher densities or not are dependent on the different counterion binding ability and on the different contribution to the density of the three halides.     

Spontaneous Vesicle Formation in Mixed Aqueous Solution of Poly-tailed Cationic and Anionic Surfactants

Spontaneous vesicles from the mixed queous solution of poly-talied cationic surfactant PTA and anionic surfactant AOT are firstly obtained.Vesicle formation and characterizations are demonstrated by negative-staining TEM and dynamic light scattering.A monodisperse vesicle system is obtained with a polydispersity of 0.082.Ultrasonication can promote the vesicle formation,Mechanism of vesicle formation is discussed from the viewpoint of molecular interaction.     

Interfacial Tension of Aqueous Three‐Phase Systems Formed by Triton X‐100/PEG/Dextran

A novel aqueous three‐phase system was formed spontaneously when a nonionic surfactant (Triton X‐100) and two polymers (PEG and dextran) were mixed. The interfacial tension between the phases was measured by the spinning drop method. It was shown that the values of interfacial tension were extremely small. The interfacial tensions of the top/middle phases were much lower than those of the middle/bottom phases. The interfacial tension was affected by component concentrations, temperature, added salts, and the density difference between two phases. Temperature exhibited a special effect on interfacial tension: with the increase of temperature, interfacial tension increases significantly.     

Electrochemical Behavior of Cationic‐Anionic Surfactant Solutions by Cyclic Voltammetry

The electrochemical behavior of cationic tetradecyltrimethylammonium bromide (TTABr), anionic sodium dodecylsulfate (SDS), cationic‐anionic (catanionic) mixed surfactant and self‐assembled solutions at Pt wire electrode has been studied by cyclic voltammetry (CV). On the basis of the cyclic voltammograms and determining the self‐assembled structures by using freeze‐fracture transmission electron microscopy (FF‐TEM), the mechanisms of the electrochemical reactions near the electrode for the two surfactant self‐assembled solutions, i.e., micelles and vesicles, are presented. When mixing TTABr and SDS, at the right mixing ratio of TTABr:SDS, vesicles are established spontaneously. The redox behavior of two vesicle‐phase solutions at a constant total concentration of 25 mmol·L^?1 with the ratios of TTABr:SDS 9.35:0.65 of positive charges of bilayer membranes and 1.25:8.75 of negative charges of bilayer membranes are investigated by cyclic voltammetry. These cyclic voltammograms of vesicles with different charges are compared with those of 100 mmol · L^?1 TTABr and 100 mmol · L^?1 SDS micelle solutions. This CV study on surfactant self‐assembled solutions should open up a new method of study in surfactant science.     

Interaction between β‐Cyclodextrin and Mixed Cationic‐Anionic Surfactants (2): Aggregation Behavior

The interactions between β‐cyclodextrin (β‐CD) and the mixtures of cationic‐anionic surfactants in the aqueous solution were investigated by surface tension, rheology, and dynamic light scattering measurements. It was shown that the key‐lock interactions between β‐CD and mixed cationic‐anionic surfactants were stronger than the electrostatic/hydrophobic interactions between cationic and anionic surfactants. The inclusion of β‐CD to surfactants could destroy the ion‐pair and aggregates of cationic‐anionic surfactants, and even inhibited the precipitation of the mixed cationic‐anionic surfactants. Furthermore, the inclusion of β‐CD to surfactants could also destroy the hydrogen bond between β‐CD molecules, inducing the disassociation of the aggregation formed by β‐CD themselves.     

“Three-in-one” Complexes Formed by Anionic Guests and Monosubstituted Cationic Alkyldiamino β-Cyclodextrin Derivatives

The effect of electrostatic interactions on the complexation of ionic guests by charged β-cyclodextrin (βCD) derivatives is reviewed. Special attention is paid to the numerous studies concerning the effect of electrostatic interactions on (i) the complexation of fluorescent and UV probes; (ii) the catalytic and chiral recognition properties of βCD derivatives; and (iii) the complexation of two bile salts (sodium cholate, NaC, and sodium deoxycholate, NaDC). The formation of three-in-one complexes between NaC and alkyldiamino βCD derivatives is also presented.     

Interaction between β‐Cyclodextrin and Mixed Cationic‐Anionic Surfactants (1): Thermodynamic Study

The interactions between β‐cyclodextrin (β‐CD) and the mixtures of cationic‐anionic surfactants in aqueous solution were investigated by surface tension and ¹H NMR measurements. It was shown that the critical micelle concentration (cmc) increased linearly with the increase of β‐CD concentration. Furthermore, β‐CD formed 1∶1 inclusion complex with both cationic and anionic surfactants in the mixed surfactant systems, and no significant selective inclusion was observed. The thermodynamic parameters of the inclusion process of β‐CD to mixed cationic‐anionic surfactants were calculated by a numerical method based on the surface tension measurements, and it was found that the inclusion process was both enthalpy and entropy favorable.     

Properties and Extraction for [Ni(NH3)6]2+ of ATPS-a Formed by Aqueous Cationic–Anionic Surfactant Mixtures

The properties and extraction for [Ni(NH₃)₆]²⁺ of anionic aqueous two-phase systems (ATPS-a) that formed in mixtures of cetyltrimethylammonium bromide (CTAB) and excess sodium dodecyl sulfate (SDS) aqueous solutions were investigated. The results showed that the properties and extraction effects were strongly affected by the surfactant concentration, the temperature of system, and the mole fraction of surfactants. The increase of temperature induces narrower phase region and larger phase volume ratio. In addition, [Ni(NH₃)₆]²⁺ was extracted into the surfactant-rich phase with higher distribution coefficient when the liquid crystal had the birefringent properties. Moreover, the distribution coefficient can be improved through reducing the concentration of surfactant from 0.15 to 0.05 mol · L^?1 or increasing mole fraction of CTAB from 21.9% to 23.1%. The results showed that ATPS of cationic–anionic surfactants was efficient for [Ni(NH₃)₆]²⁺ extraction with distribution coefficients of 13.5 when the total surfactant concentration was 0.05 mol · L^?1, mole fraction of CTAB was 21%, and temperature was 34°C.     

Synthesis and Characterization of Zirconia Nanocrystallites by Cationic Surfactant and Anionic Surfactant

1 INTRODUCTION Zirconia is a kind of metallic oxide with high mel- ting point. It is highly corrosion-resistant for acid fu- sant and neutral fusant, thus it can be used as refrac- tory material, and it can also be utilized as acid acy- loxy bi-functional catalystic material owing to hav- ing both acid and alkali surface centers[1]. Moreover, zirconia has superior ion-exchange capacity as well as chemical and mechanical stability, therefore, it can also be applied as a catalyst carrier. …     

Synthesis and Characterization of Star-branched Polyisobutylene by Combination of Anionic Polymerization and Cationic Polymerization

The construction of polymer materials with controlled compositions, topologies, and functionalities has been the enduring focus in current research1,2. Among them, star polymers have been extensively studied for a long time, due to their markedly lower so…     

Molecular Exchanging Energy of Anionic／Cationic Surfactants System on the Surface of Solution

In order to study synergism of the mixed surfactants system with molecular exchanging energy ( ε ), the Lennard-Jones formula has been firstly introduced to evaluate the ε of the mixed system, CH3(CH2)nOSO 3^- /CH3(CH2)nN^ (CH3)3, directly from their molecular structure. The comparison of the calculated and the observed results showed that this method is practical.     

Synthesis of Polyvinylacetate‐Sodium Montmorillonite Hybrids by Emulsion Polymerization in the Presence of Anionic Surfactants

The emulsion polymerisation of vinyl acetate (VAc) in presence of sodium dodecylsulphate (SDS) and sodium montmorillonite (NaMMT) is used in order to achieve polymer‐clay hybrids. The influence of the polyvinylacetate (PVAc), SDS, and PVAc‐SDS complex on the NaMMT structure also was investigated. The VAc emulsion polymerization rate exhibits a maximum as the NaMMT concentration increases. The XRD patterns correspond to hybrids with intercalated structure. If a water soluble comonomer, ammonium sulphato ethylmethacrylate (ASEMA) is used for copolymerization with VAc, a exfoliated hybrid structure (from XRD spectra) is obtained. The solid materials were analysed by TGA, FTIR, XRD, SEM, and TEM.     

Adsorption and Micellization Behavior of Cationic Surfactants (Gemini and Conventional)—Amphiphilic Drug Systems

In the present work, the behavior of mixed drug–surfactant systems has been studied by surface tension measurements. The drug used in this work is adiphenine hydrochloride (ADP) and the surfactants are of m-s-m type geminis, i.e., alkanediyl-α,ω-bis(dimethylalkylammonium bromide), with m = (14, 16), s = (4, 5, 6), and conventional alkyltrimethylammonium bromides (CTAB, TTAB). The excess surface concentration (Γ _max ) increases and the minimum head group area at the air/water interface (A _min) decreases with increasing concentration of surfactant in the drug solution. Both the critical micelle concentration (cmc) and ideal cmc (cmc*) values decrease with mole fraction of surfactants. Also, the cmc values are lower than cmc*, indicating attractive interactions are present in the mixed micelles. The mole fractions of surfactant in the micelles $ \left( {X_{1}^{m} } \right) $ and monolayers $ \left( {X_{1}^{\sigma } } \right) $ , as well as the respective interaction parameters ( $ \beta^{m} $ , $ \beta^{\sigma } $ ), indicate that monolayer formation is easier than micelle formation due to the rigid hydrophobic part of the drug.     

Aqueous Two‐Phase System (ATPS) Containing Gemini (12‐3‐12,2Br−) and SDS I: Phase Diagram and Properties of ATPS

Two phases coexist in an aqueous system that contains the two surfactants cationic gemini 12‐3‐12,2Br? and anionic SDS. An aqueous two‐phase system (ATPS) is formed in a narrow region of the ternary phase diagram different from that of traditional aqueous cationic‐anionic surfactant systems. In that region, the molar ratio of gemini to SDS varies with the total concentration of surfactants. ATPS not only has higher stability but also has longer phase separation time for the new systems than that of the traditional system. Furthermore, the optical properties of ATPS are different at different total concentrations. All of these experimental observations can be attributed to the unique properties of gemini surfactant and the synergy between the cationic gemini surfactant and the anionic surfactant SDS.     

Fabrication of ZnO Nanorods in Colloidal Systems Formed by PEO‐PPO‐PEO Block Copolymers

One‐dimensional (1‐D) ZnO nanorods with various sizes were synthesized in colloidal systems formed by PEO‐PPO‐PEO block copolymers. The experimental results revealed that the growth of ZnO nanorods was dependent on the molecular structure of polyether. It was known that L64 (EO₁₃PO₃₀EO₁₃) and F68 (EO₈₀PO₃₀EO₈₀) had the same size PPO block but different content of PEO. We concluded that the size of the ZnO products obtained in F68 was larger due to its longer PEO chain.     

Synthesis of Hydrophobically Modified Poly（acrylic acid） gels and Interaction of the gels with Cationic／Anionic Surfactants

Poly(acrylic acid)(PAA) gel network with only chemical crosslinking and hydorophobically modified PAA(HM-PAA)gels with both chemical and physical crosslinking were synthesized by radical polymerization in tert-butanol,using ethylene glycol dimethacrylate (EGDMA) as crossliker,and 2-(N-ethylperfluorooctanesulfoamido)ethyl methacrylate (FMA),stearyl acrylate (SA) or lauryl acrylate (LA) as Hydrophobic comonomer respectively.The effcet of the fractions and the species of the hydrophobes on swelling properties of HM-PAA gels and the interaction of gels and surfactants were studied.The results showed that the swelling ratio of HM-PAA gels exhibited a sharp decrease with increasing hydrophobic comomomer comcentration,Which Could be sacribed to the formation of strong hydrophobic association among hydrophobic groups.It was proved that two kinds of binding mechanisms of surfactan/gel and different kinds of hydrophobic clusters existed in gels containing both physical and chemical networks.     

Synthesis and Properties of Gemini Cationic Surfactants with Amide Spacers

Four gemini cationic surfactants {N,N‘-di[2-(lauryldimethylamino)acetyl]polymethylenediamine dichloride, LAA-s-LAA, s = 2,3,4,6 } were synthesized by using four bis (a-chloroacetamide)s and N, N-dimethyl-laurylamine, respectively. The molecular structures were characterized by means of IR, ^1H NMR. ^13C NMR and MS, and the behavior of their aqueous solutions was studied. The critical micell concentrations (CMC) of LAA-s-LAA were one order of magnitude lower than that of dodecyltrimethyl ammonium chloride (DTAC). With the change of the length of spacer chain(s), their CMC values change, and CMC reaches the top value at s=4.