Electrochemical modification of vertically aligned carbon nanotube arrays

Electrochemical oxidation and reduction were utilized to modify vertically aligned carbon nanotube (CNT) arrays grown on a porous network of conductive carbon microfibers. Ultrafast and complete CNT opening and purification were achieved through electrochemical oxidation. Highly dispersed platinum nanoparticles were then uniformly and densely deposited as electrocatalysts onto the surface of these CNTs through electrochemical reduction. Using supercritical drying techniques, we demonstrate that the unidirectionally aligned and laterally spaced geometry of the CNT arrays can be fully retained after being subjected to each step of electrochemical modification. The open-tipped CNTs can also be electrochemically detached in full lengths from the supporting substrates and harvested if needed.     

Catalyst-free selective-area growth of vertically aligned zinc oxide nanowires

An effective method for the catalyst-free selective-area growth of single-crystalline zinc oxide nanowires on patterned substrates defined by e-beam lithography and treated by chemical etching with increased surface roughness is reported. The nanowire growth is realized via a surface-roughness-assisted vapor–solid mechanism by thermal evaporation. The nanowires are vertically aligned on sapphire and randomly oriented on silicon substrates.     

Controlled growth of large-area, uniform, vertically aligned arrays of alpha-Fe2O3 nanobelts and nanowires

Vertically aligned iron oxide nanobelt and nanowire arrays have been synthesized on a large-area surface by direct thermal oxidation of iron substrates under the flow of O(2). The effects of reactive gas pressure, composition, and temperature have been systematically studied. It was found that nanobelts (width, tens of nanometers; thickness, a few nanometers) are produced in the low-temperature region (approximately 700 degrees C) whereas cylindrical nanowires tens of nanometers thick are formed at relatively higher temperatures (approximately 800 degrees C). Both nanobelts and nanowires are mostly bicrystallites with a length of tens of micrometers which grow uniquely along the [110] direction. The growth habits of the nanobelts and nanowires in the two temperature regions indicate the role of growth rate anisotropy and surface energy in dictating the ultimate nanomorphologies.     

Controllable assembly of aligned ZnO nanowires/belts arrays

We describe a simple method to assemble ZnO nanowires/belts into highly ordered arrays. ZnCu(2) alloy was used as the Zn source, which reacted with water vapor to generate ZnO nanocrystals. The reaction was performed in a mild way, which facilitated the easy control of the reaction conditions. By simply controlling the water bath temperature and carrier gas flux in our experiments, we obtained ZnO nanowires/belts aligned to form ordered arrays. The highly ordered nature of the ZnO arrays is suggested to be related both with the polarities of the H(2)O molecule and the ZnO (0001) surface. Photoluminescence (PL) microscopy revealed that the comblike structures had waveguide properties, where green light enhancement was observed at the tips of the branches. The light enhancement property reveals their promising applications as light source arrays.     

Self-assembly of vertically aligned gold nanorod arrays on patterned substrates

Nanorods standing at attention! A self-assembly technique based on convective and capillary forces was used for the direct fabrication of standing arrays of gold nanorods on lithographically predefined areas. The hexagonal close-packed structure of gold nanorods creates an ideal substrate for surface-enhanced Raman spectroscopy.     

Modification of vertically aligned carbon nanotube arrays with palladium nanoparticles for electrocatalytic reduction of oxygen

A novel type of palladium nanoparticles-modified multiwalled carbon nanotubes composite-electrode with electrocatalytic activity for oxygen reduction is presented. The nanocomposite was prepared by magnetron sputtering deposition with Pd in Ar atmosphere on MWNTs, which were synthesized on Ta plates by chemical vapor deposition. Both scanning electron microscopy and transmission electron microscopy were employed to observe the surface morphology. The Pd nanoparticles, with diameters around 5 nm, are dispersed at the tips and on the sidewalls of the MWNTs. Voltammetry, amperometry and electrochemical impedance measurements were used to demonstrate the strong electrocatalytic activity of the nanocomposite in acid solution. Compared to the bare MWNT electrode, the PdNPs/MWNT nanocomposite shows a positive shift of the O₂ reduction current at onset potentials from +400 to +500 mV, a concurrent 1.5-fold increase in the O₂ reduction peak current with high stability. The successful preparation of PdNPs/MWNTs nanocomposite by magnetron sputtering deposition opens a new path for an efficient dispersion of promising nanoparticles for fuel cells and O₂ sensors.     

A novel catalyst-free synthesis of vertically aligned silicon nanowire-carbon nanotube heterojunction arrays for high performance electron field emitters

A novel, catalyst-free strategy for the direct synthesis of vertically aligned silicon nanowire-carbon nanotube (SiNW-CNT) heterojunction arrays is presented. Such a heterojunction with the junction area in the nanoscale displays enhanced field emission characteristics at low turn-on field, with a nearly three times increase in the field enhancement factor.     

In-situ growth of vertically aligned nickel cobalt sulfide nanowires on carbon nanotube fibers for high capacitance all-solid-state asymmetric fiber-supercapacitors

Fiber-supercapacitors(FSCs)are promising power sources for miniature portable and wearable electronic devices.However,the development and practical application of these FSCs have been severely hindered by their low volumetric capacitance and narrow operating voltage.In this work,vertically aligned nickel cobalt sulfide(Ni Co_2S_4)nanowires grown on carbon nanotube(CNT)fibers were achieved through an in-situ two-step hydrothermal reaction method.The as-prepared Ni Co_2S_4@CNT fiber electrode exhibits a high volumetric capacitance of 2332 F cm~(-3),benefiting from its superior electric conductivity,large surface area,and rich Faradic redox reaction sites.Furthermore,a Ni Co_2S_4@CNT//VN@CNT(vanadium nitride nanosheets grown on CNT fibers)asymmetric fiber-supercapacitor(AFSC)was successfully fabricated.The device exhibits an operating voltage up to 1.6 V and a high volumetric energy density of 30.64m Wh cm~(-3).The device also possesses outstanding flexibility as evidenced by no obvious performance degradation under various bending angles and maintaining high capacitance after 5000 bending cycles.This work promotes the practical application of flexible wearable energy-storage devices.     

Two-dimensional ordered arrays of aligned lipid tubules on substrates with microfluidic networks

Microfluidic networks is a powerful tool for aligning one-dimensional materials over a large area on solid substrates. Here we show that lipid nano- and microtubules can be assembled into two-dimensional (2-D) parallel arrays with controlled separations by combining fluidic alignment with dewetting, which occurs within microchannels. We also demonstrate that lipid tubules can be bent into a well-defined shape at the entrance of the channels by the capillary force. Atomic force microscopy is used to study the structure and stability of the aligned lipid tubules on substrates. The deposition experiments with silica colloidal particles show that the 2-D parallel-aligned tubules can be used as a template to synthesize silica films with controlled morphologies and patterns on substrates in a single-step process.     

Photocatalytic methane decomposition over vertically aligned transparent TiO2 nanotube arrays

We report here on a study of vertically aligned TiO(2) nanotube arrays grown by the one-step anodic oxidation technique and their photocatalytic performance for methane decomposition. Quantitative activity data as a function of film thickness is obtained.     

Molecular beam-controlled nucleation and growth of vertically aligned single-wall carbon nanotube arrays

The main obstacle to widespread application of single-wall carbon nanotubes is the lack of reproducible synthesis methods of pure material. We describe a new growth method for single-wall carbon nanotubes that uses molecular beams of precursor gases that impinge on a heated substrate coated with a catalyst thin film. In this growth environment the gas and the substrate temperature are decoupled and carbon nanotube growth occurs by surface reactions without contribution from homogeneous gas-phase reactions. This controlled reaction environment revealed that SWCNT growth is a complex multicomponent reaction in which not just C, but also H, and O play a critical role. These experiments identified acetylene as a prolific direct building block for carbon network formation that is an order of magnitude more efficient than other small-molecule precursors. The molecular jet experiments show that with optimal catalyst particle size the incidence rate of acetylene molecules plays a critical role in the formation of single-wall carbon nanotubes and dense vertically aligned arrays in which they are the dominant component. The threshold for vertically aligned growth, the growth rate, the diameter, and the number of walls of the carbon nanotubes are systematically correlated with the acetylene incidence rate and the substrate temperature.     

High-performance supercapacitors based on free-standing SiC@PEDOT nanowires with robust cycling stability

Conductive polymers as one of the candidate materials with pseudocapacitor behavior have inspired wide attentions, because of their high conductivity, fexibility, low cost and excellent processability.However, the intrinsically poor cycling stability induced by the volume change over the doping/dedoping redox process limits their practical applications. Herein, we report the exploration of electrodes with robust cycling capacity for supercapacitors(SCs), which are rationally designed by coating ...     

Electrochemical capacitive properties of CNT fibers spun from vertically aligned CNT arrays

Due to their lightweight, large surface area; excellent electrical conductivity; and mechanical strength, carbon nanotube (CNT) fibers show great potentials in serving as both electrode materials and current collectors in supercapacitors. In this paper, the capacitive properties of both as-spun CNT fibers and electrochemically activated CNT fibers have been investigated using cyclic voltammetry and electrochemical impedance spectroscopy. It is found that the as-spun CNT fibers exhibit a very low specific capacitance of 2.6 F g⁻¹, but electrochemically activated CNT fibers show considerably improved specific capacitance. The electrochemical activation has been realized by cyclic scanning in a wide potential window. Different electrolytes have also been examined to validate the applicability of our carbon materials and the activation mechanism. It is believed that such an activation process can significantly improve the surface wetting of the CNT fibers by electrolyte (aqueous Na₂SO₄ solution). The cycling stability and rate-dependence of the capacitance have been studied, and the results suggest practical applications of CNT fibers in electrochemical supercapacitors.     

Uniform, dense arrays of vertically aligned, large-diameter single-walled carbon nanotubes

Precisely controlled reactive chemical vapor synthesis of highly uniform, dense arrays of vertically aligned single-walled carbon nanotubes (SWCNTs) using tailored trilayered Fe/Al(2)O(3)/SiO(2) catalyst is demonstrated. More than 90% population of thick nanotubes (>3 nm in diameter) can be produced by tailoring the thickness and microstructure of the secondary catalyst supporting SiO(2) layer, which is commonly overlooked. The proposed model based on the atomic force microanalysis suggests that this tailoring leads to uniform and dense arrays of relatively large Fe catalyst nanoparticles on which the thick SWCNTs nucleate, while small nanotubes and amorphous carbon are effectively etched away. Our results resolve a persistent issue of selective (while avoiding multiwalled nanotubes and other carbon nanostructures) synthesis of thick vertically aligned SWCNTs whose easily switchable thickness-dependent electronic properties enable advanced applications in nanoelectronic, energy, drug delivery, and membrane technologies.     

Dendron growth from vertically aligned single-walled carbon nanotube thin layer arrays for photovoltaic devices

Single-walled carbon nanotube arrays attached to conductive transparent electrodes have previously shown promise for use in photovoltaic devices, whilst still retaining light transmission. Here, chemical modification of these thin (<200 nm) arrays with PAMAM-type dendrons has been undertaken to enhance the photoresponse of these devices. The effect of modification on the electrode was measured by differential pulse voltammetry to detect the dendrons, and the effect on the nanotubes was measured by Raman spectroscopy. Solar simulator illumination of the cells was performed to measure the effect of the nanotube modification on the cell power, and determine the optimal modification. Electrochemical impedance spectroscopy was also used to investigate the equivalent electronic circuit elements of the cells. The optimal dendron modification occurred with the second generation (G-2.0), which gave a 70% increase in power over the unmodified nanotube array.     

Facile solution route to vertically aligned, selective growth of ZnO nanostructure arrays

For any future cost-effective applications of inorganic nanostructures, in particular, hybrid photovoltaic cells, it is essential that these inorganic nanomaterials be solution processable and selectively printable. This letter reports the selective growth of single-crystal ZnO nanostructures based on the microcontact printing of an inorganic nanocrystal seeding film. The pattern-transfer quality is dependent on the concentration of the inking solution. Variable yet controllable anisotropic growth of ZnO nanowires has been demonstrated on the transferred patterns of ZnO nanocrystal films. The patterning and growth of these highly ordered arrays of ZnO nanostructures employ a simple soft lithography technique and mild reaction conditions at low temperature and in the absence of harmful organic additives.     

Patterned growth of vertically aligned silicon nanowire arrays for label-free DNA detection using surface-enhanced Raman spectroscopy

Patterning is of paramount importance in many areas of modern science and technology. As a good candidate for novel nanoscale optoelectronics and miniaturized molecule sensors, vertically aligned silicon nanowire (SiNW) with controllable location and orientation is highly desirable. In this study, we developed an effective procedure for the fabrication of vertically aligned SiNW arrays with micro-sized features by using single-step photolithography and silver nanoparticle-induced chemical etching at room temperature. We demonstrated that the vertically aligned SiNW arrays can be used as a platform for label-free DNA detection using surface-enhanced Raman spectroscopy (SERS), where the inherent “fingerprint” SERS spectra allows for the differentiation of closely related biospecies. Since the SiNW array patterns could be modified by simply varying the mask used in the photolithographic processing, it is expected that the methodology can be used to fabricate label-free DNA microarrays and may be applicable to tissue engineering, which aims to create living tissue substitutes from cells seeded onto 3D scaffolds.

Fabrication of nickel hydroxide electrodes with open-ended hexagonal nanotube arrays for high capacitance supercapacitors

A nickel hydroxide electrode with open-ended hexagonal nanotube arrays, prepared by hydrolysis of nickel chloride in the presence of hexagonal ZnO nanorods, shows a very high capacitance of 1328 F g(-1) at a discharge current density of 1 A g(-1) due to the significantly improved ion transport.     

The electrodeposition of high-density,ordered arrays of Bi1-xSbx nanowires

Here we report the synthesis of dense arrays of Bi1-xSbx nanowires with >5 x 1010 nanowires/cm2. The individual wires are crystalline, relatively homogeneous, and highly textured in a 110 direction, with diameters of 40 nm and a composition of x = 12-15 atom % Sb. By tuning the solution concentrations and controlling the growth rate by controlling the potential, the composition, crystallinity, and morphology of the nanowires can be varied.