聚噻吩取代效应的理论研究

用自洽场晶体轨道法（ＳＣＦ ＣＮＤＯ／２－ＣＯ）对聚噻吩的一些一取代物和二取代物的电子结构进行了研究，计算的取代基包括－ＣＨ３，－Ｃ２Ｈ５，－ＯＣＨ３和－ＣＮ。计算结果表明，这些取代基基本没有影响聚噻吩主链的平面结构，除聚－３，４－二甲基噻吩的主链发生了４０°的扭转外，其它衍生物的主链仍处于同一平面。根据各取代高分子的电子特性我们得到结论：给电子基团和吸电子基团的取代教师将使能隙（Ｅｇ）减小，价带     

The mode of binding ACMA-DNA relies on the base-pair nature

A thermodynamic and kinetic study on the mode of binding of 9-amino-6-chloro-2-methoxi-acridine (ACMA) to poly(dA-dT)·poly(dA-dT) and poly(dG-dC)·poly(dG-dC) has been undertaken at pH = 7.0 and I = 0.1 M. The spectrophotometric, kinetic (T-jump), circular dichroism, viscometric and calorimetric information gathered point to formation of a fully intercalated ACMA complex with poly(dA-dT)·poly(dA-dT) and another one only partially intercalated (7%) with poly(dG-dC)·poly(dG-dC). The ACMA affinity with the A-T bases was higher than with the G-C bases. The two polynucleotide sequences give rise to external complexes when the ACMA concentration is raised, namely, the electrostatic complex poly(dA-dT)·poly(dA-dT)-ACMA and the major groove binding complex poly(dG-dC)·poly(dG-dC)-ACMA. A considerable quenching effect of the ACMA fluorescence is observed with poly(dA-dT)·poly(dA-dT), ascribable to face-to-face location in the intercalated A-T-ACMA base-pairs. The even stronger effect observed in the presence of poly(dG-dC)·poly(dG-dC) is related to the guanine residue from on- and off-slot ACMA positions.     

Fluorescence study on dynamics of liquid-crystalline polymers

Fluorescence measurements of various main-chain liquid-crystalline (LC) polyesters, poly[oxybiphenyl-4, 4'-diyloxy(2, 5-dihexadecyloxy)-1, 4-pyromellitoyl] (B-C16), poly[(ethylene terephthalate)-co-(p-oxybenzoate)] (PET40/OBA60), poly(oxybiphenyl-4, 4'-diyloxy-1, 10-decanedioyl) (PB-10), low-molecular-weight LC bis(p-hexyloxyphenyl) terephthalate (PP6), and a lyotropic LCP, poly(sulfo-1, 4-phynelene 3'-nitroterephthalate) (PSPNT), were carried out to investigate their dynamics and intermolecular interaction changes.     

Protein adsorption on polymer-modified silica particle surface

Silicon substrate surface and silica particle surface were modified with five kinds of polymers, poly(2-methoxyethyl methacrylate) (pMEMA), poly(2-hydroxyethyl methacrylate) (pHEMA), poly(acrylamide) (pAAm), poly(methyl methacrylate) (pMMA), and poly(styrene) (pSt), using a combined polymerization of surface-initiated polymerization that gives dense polymer chain layers and atom transfer radical polymerization (ATRP) that yields polymers with a narrow molecular weight distribution. Measurements of water contact angle and polymer chain amount on the modified silicon substrate surface and adsorption amounts of proteins (albumin and fibrinogen) on the modified silica particle surface revealed that the amount of polymer on the modified surface greatly affects the suppression of protein adsorption on the surface.     

Effect of matrix and solvent on the analysis of novel poly(phenylenevinylene) derivatives by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Six novel poly(phenylenevinylene) (PPV) derivatives carrying butoxy or myrtanyl groups, including poly(2-butoxy-m-phenylenevinylene) (Bu-MPV), poly(2,5-dibutoxy-p-phenylenevinylene-alter-p-phenylenevinylene) (Bu-PPPV), poly(2,5-dibutoxy-p-phenylenevinylene-alter-m-phenylenevinylene) (Bu-PMPV), poly(2-myrtanyl-m-phenylenevinylene) (Myr-MPV), poly(2,5-dimyrtanyl-p-phenylenevinylene-alter-p-phenylenevinylene) (Myr-PPPV), and poly(2,5-dimyrtanyl-p-phenylenevinylene-alter-m-phenylenevinylene) (Myr-PMPV), were characterized by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). The repeat unit mass and the end-group structures of each sample were obtained. Distinctly different spectra with different ion series and/or different ion signal intensities were observed for the analytes Bu-MPV, Myr-MPV, Bu-PPPV, Myr-PPPV and Myr-PMPV when different matrices were used, and different ion series were acquired when different solvents were used for Myr-PPPV and Myr-PMPV. The results show that the PPV oligomers with different shapes and/or with different end groups can be selectively desorbed and ionized in MALDI by using different matrices.     

Calorimetric and thermal analysis studies on the binding of phenothiazinium dye thionine with DNA polynucleotides

Binding of the phenothaizinium dye thionine with four sequence specific deoxyribopolynucleotides, poly(dG-dC).poly(dG-dC), poly(dG).poly(dC), poly(dA-dT).poly(dA-dT), and poly(dA).poly(dT) has been investigated by means of thermal helix melting, isothermal titration calorimetry, and differential scanning calorimetry experiments. The binding affinity values evaluated from isothermal titration calorimetry suggests that thionine exhibits the highest binding affinity to poly(dG-dC).poly(dG-dC). The binding to poly(dG-dC).poly(dG-dC), poly(dA-dT).poly(dA-dT), and poly(dG).poly(dC) is exothermic and favoured by negative enthalpy changes while binding to poly(dA).poly(dT) is endothermic and anomalous. The values of heat capacity changes of the interaction are negative and in the range (?0.4 to ?0.5) kJ · K^?1 · mol^?1. The binding is characterized by strong stabilization of the polynucleotides against thermal strand separation. The binding affinity values derived from thermal melting data are in excellent agreement with those obtained from isothermal titration calorimetry data. Insights into the energetic aspects and guanine–cytosine selectivity of the DNA interaction of thionine have been obtained from these studies.     

Chiral separation with dipeptide-terminated polymeric surfactants: the effect of an extra heteroatom on the polar head group

Chiral recognition of two binaphthyl derivatives and three benzodiazepines were studied by use of polymeric surfactants in electrokinetic chromatography. Four specific dipeptide terminated (multichiral) micelle polymers were synthesized for this study. These include poly (sodium-N-undecanoyl-L-alanyl-leucinate)-(poly L-SUAL), poly (sodium-N-undecanoyl-L-valyl-leucinate) (poly L-SUVL), poly (sodium-N-undecanoyl-Lseryl-leucinate) (poly L-SUSL), and poly(sodium-N-undecanoyl-L-threonyl-leucinate) (poly L-SUTL). In addition to the chiral separation study, the physicochemical properties (critical micelle concentration and specific rotation) of each polymer were investigated. The molecular weights of the various dipeptide-terminated micelle polymers were determined using analytical ultracentrifugation. These dipeptide-terminated micelle polymers were designed to study the effect of the extra heteroatom at the polar head group of the micelle polymer (i.e., poly L-SUSL compared to poly L-SUAL and poly L-SUTL compared to poly L-SUVL) on the enantiomeric separation of the binaphthyl derivatives and benzodiazepines. The synergistic effect of three chiral centers (poly L-SUTL) provided improved resolution over that of two chiral centered dipeptide-terminated micelle polymer in the case of (+/-)-temazepam, (+/-)-oxazepam, (+/-)-binaphthol, and (+/-)-binaphthol phosphate. The chiral recognition mechanisms in these cases were additionally controlled by the presence of the extra heteroatom located on the polar head group of the micelle polymers.     

13C nuclear magnetic resonance studies on the stereochemical configurations of 2,4-dimethoxypentane and poly(alkyl vinyl ethers)

¹³C nuclear magnetic resonance (CMR) spectra were obtained for 2,4-dimethoxypentane, which is a model compound of poly(methyl vinyl ether), and the effects of the solvent and temperature on the chemical shifts were investigated. CMR spectra of poly-(alkyl vinyl ethers) were also determined and analyzed. The diad tacticities were obtained from β-methylene carbon resonances of poly(methyl vinyl ether), poly(ethyl vinyl ether), and poly(isobutyl vinyl ether), but not from those of poly(isopropyl vinyl ether) and poly(tert-butyl vinyl ether). The methoxyl carbon resonance of poly(methyl vinyl ether) and the ethoxyl methylene carbon resonance of poly(ethyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively. The α-methine and quaternary carbon resonances of poly(tert-butyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively.     

Miscibility of Halogen-containing Polymethacrylates with Various Poly(alkyl acrylate)s

The miscibility behavior of a series of halogen-containing polymethacrylates with poly(methyl acrylate), poly(ethyl acrylate), poly(n-propyl acrylate) and poly(n-butyl acrylate) was investigated by differential scanning calorimetry and for lower critical solution temperature (LCST) behavior. Poly(chloromethyl methacrylate), poly(1-chloroethyl methacrylate), poly(2-chloroethyl methacrylate), poly(2,2-dichloroethyl methacrylate), poly(2,2,2-trichloroethyl methacrylate), poly(2-fluoroethyl methacrylate) and poly(1,3-difluoroisopropyl methacrylate) are miscible with some of the poly(alkyl acrylate)s. Most of the miscible blends show LCST behavior. However, poly(3-choloropropyl methacrylate), poly(3-fluoropropyl methacrylate), poly(4-fluorobutyl methacrylate), poly(1,1,1,3,3,3-hexafluoroisopropyl methacrylate), poly(2-bromoethyl methacrylate) and poly(2-iodoethyl methacrylate) are immiscible with any of the poly(alkyl acrylate)s studied. © 1997 John Wiley & Sons, Ltd.     

1H NMR spectral studies on the polymerization mechanism of indole and its derivatives

The existence of NH bond according to the hydrogen nuclear magnetic resonance ((1)H NMR) spectra of polyindole and its derivatives, such as poly(5-bromoindole), poly(5-cyanoindole), poly(5-nitroindole), poly(5-methylindole), proved polymerization of high-quality polyindoles, which were electrosynthesized from middle strong Lewis acid boron trifluoride diethyl etherate (BFEE) and its mixed electrolytes with additional diethyl ether, occurred at 2,3-position. The elongation of the conjugation length made the chemical shift of all the protons of polyindoles to lower field in comparison with those of monomers.     

氢化松香与HEMA酯化物自聚与共聚研究

用氢化松香(HR)与甲基丙烯酸-2-羟乙酯(HEMA)进行酯化反应,得到了酯化物(HRH),然后对其进行了在甲苯中的自由基自聚反应、以及与甲基丙烯酸甲酯(MMA)或与苯乙烯(St)的共聚反应,制备了自聚物和共聚物,用IR和核磁共振氢谱(1HNMR)对产物进行了表征,用综合热分析仪表征了产物的热稳定性和玻璃化转变温度.结果表明:成功合成了HRH自聚物(PolyHRH)、以及共聚物[Poly(HRH-co-St)和Poly(HRH-co-MMA)].产物的热稳定性顺序为:HRH>PolyHRH>Poly(HRH-co-St)>Poly(HRH-co-MMA).     

Review on gel polymer electrolytes for lithium batteries

This paper reviews the state-of-art of polymer electrolytes in view of their electrochemical and physical properties for the applications in lithium batteries. This review mainly encompasses on five polymer hosts namely poly(ethylene oxide) (PEO), poly(acrylonitrile) (PAN), poly(methyl methacrylate) (PMMA), poly(vinylidene fluoride) (PVdF) and poly(vinylidene fluoride-hexafluoro propylene) (PVdF-HFP) as electrolytes. Also the ionic conductivity, morphology, porosity and cycling behavior of PVdF-HFP membranes prepared by phase inversion technique with different non-solvents have been presented. The cycling behavior of LiMn₂O₄/polymer electrolyte (PE)/Li cells is also described.     

Roles of head group architecture and side chain length on colorimetric response of polydiacetylene vesicles to temperature, ethanol and pH

In this contribution, we report the relationship between molecular structures of polydiacetylene (PDA) vesicles, fabricated by using three monomers, 10,12-tricosadiynoic acid (TCDA), 10,12-pentacosadiynoic acid (PCDA) and N-(2-aminoethyl)pentacosa-10,12-diynamide (AEPCDA), and their color-transition behaviors. The modification of side chain length and head group of the PDA vesicles strongly affects the colorimetric response to temperature, ethanol and pH. A shorter side chain of poly(TCDA) yields weaker inter- and intra-chain dispersion interactions in the bilayers compared to the system of poly(PCDA), which in turn results in a faster color transition upon exposure to all stimuli. A change of head group in poly(AEPCDA) slightly reduces the transition temperature. Interestingly, the colorimetric response of poly(AEPCDA) vesicles to the addition of ethanol is found to occur in a two-step fashion while the response of poly(PCDA) vesicles takes place in a one-step process. The amount of ethanol required for inducing complete color-transition of poly(AEPCDA) vesicles is also much higher, about 87% v/v. The increase of pH to ~9 and ~10 causes a color-transition of poly(TCDA) and poly(PCDA) vesicles, respectively. The poly(AEPCDA) vesicles, on the other hand, change color upon decreasing pH to ~0. The colorimetric response also occurs in a multi-step fashion. These discrepancies are attributed to the architecture of surface layers of poly(AEPCDA), constituting amine and amide groups separated by ethyl linkers.     

Studies on interpolymer self-organisation behaviour of protoporphyrin IX bound poly(carboxylic acid)s with complimentary polymers by means of fluorescence techniques

Covalently bound protoporphyrin IX was used as a fluorophore to investigate the interpolymer complex formation between the poly(carboxylic acid)s, PMAA/PAA and poly(N-vinyl pyrrolidone), PVP, poly(ethylene oxide), PEO or poly(ethylene glycol), PEG. Absorption and emission spectral properties of protoporphyrin IX bound to PAA, PMAA and PVP have been studied. Protoporphyrin IX in poly(MAA-co-PPIX) was found to be present in the dimer or higher aggregated form at low pH due to the environmental restriction imposed by the polymer whereas in the case of poly(AA-co-PPIX) and poly(VP-co-PPIX), PPIX exists in monomeric form. The fluorescence intensity and lifetime of PPIX bound to poly(carboxylic acid)s increase on complexation through hydrogen bonding with PVP, PEO and PEG due to the displacement of water molecules in the vicinity of the PPIX. Poly(MAA-co-PPIX) shows longer fluorescence lifetime due to the more compact interpolymer complexation as compared to poly(AA-co-PPIX) due to the enhanced hydrophobicity of PMAA. Poly(VP-co-PPIX) shows a decrease in the fluorescence lifetime on complexation with PMAA or PAA due to the hydrophilic and microgel like environment of the fluorophore bound to PVP. The contrasting behaviour of the same polymer adduct with respect to the site of the fluorophore is interpreted to be due to the solvent structure which determines the environment of the fluorophore.     

HPLC analysis of synthetic polymers on short monolithic columns

Ultrashort monolithic columns (disks) were thoroughly studied as efficient stationary phases for precipitation–dissolution chromatography of synthetic polymers. Gradient elution mode was applied in all chromatographic runs. The mixtures of different flexible chain homopolymers, such as polystyrenes, poly(methyl methacrylates), and poly(tert‐butylmethacrylates) were separated according to their molecular weights on both commercial poly(styrene‐co‐divinylbenzene) disks (12 id × 3 mm and 5 × 5 mm) and lab‐made monolithic columns (4.6 id × 50 mm) filled with supports of different hydrophobicity. The experimental conditions were optimized to reach fast and highly efficient separation. It was observed that, similar to the separation of monoliths of other classes of (macro)molecules (proteins, DNA, oligonucleotides), the length of column did not affect the peak resolution. A comparison of the retention properties of the poly(styrene‐co‐divinylbenzene) disk‐shaped monoliths with those based on poly(lauryl methacrylate‐co‐ethylene dimethacrylate), poly(butyl methacrylate‐co‐ethylene dimethacrylate), and poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) supports demonstrated the obvious effect of surface chemistry on the resolution factor. Additionally, the results of the discussed chromatographic mode on the fast determination of the molecular weights of homopolymers used in this study were compared to those established by SEC on columns packed with sorbent beads of a similar nature to the monoliths.     

Comparison of surface confined ATRP and SET‐LRP syntheses for a series of amino (meth)acrylate polymer brushes on silicon substrates

A series of poly(amino (meth)acrylate) brushes, poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA), poly(2‐(diethylamino)ethyl methacrylate) (PDEAEMA), poly(2‐(dimethylamino)ethyl acrylate) (PDMAEA), poly(2‐(tert‐butylamino)ethyl methacrylate) (PTBAEMA), has been synthesized via surface‐confined controlled/living radical polymerizations using surface‐confined initiator from silane self‐assembled monolayers (SAMs) on silicon (Si) wafer substrates. Chemical methods and efficacies for two types of living radical polymerization, atom transfer radical (ATRP) and single electron transfer (SET‐LRP), are described and contrasted for the surface confined polymerization of poly(amino (meth)acrylate)s. Effects of solvent, catalyst/ligand system, and temperature on polymerization success were examined. Chemical compositions after each reaction step were characterized with FTIR spectroscopy, contact angle goniometry, and X‐ray photoelectron spectroscopy while the SAM and polymer brush thicknesses were measured with spectroscopic ellipsometry. For the first time, this study demonstrates successful surface‐confined polymerization of a series of poly(amine (meth)acrylate) brushes from Si‐SAM substrates using a copper metal electron donor catalyst. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6552–6560, 2009     

Effect of micelle structure on the spectral properties of poly(dimethylsilylene)

The absorption and fluorescence spectral features of an intractable poly(silylene), poly(dimethylsilylene) (1), in aqueous micelles--attributable to an elongated transoid backbone conformation encompassed by three micelles--are discussed.     

Kinetics of the addition of electrophilic vinyl reagents on protonated tertiary amines supported by a polymeric chain

Starting from the mechanism of the addition of vinyl methyl ketone to protonated tertiary polyamine, we examined the kinetics of addition of acrylic acid, acrylamide and methyl acrylate to P4VP in the presence of HBr. The reactivities depend on the electrophilic character of the double bond; the kinetics of addition of vinyl methyl ketone to poly(2-methyl-5-vinylpyridine), poly(2-vinylpyridine), poly(2-vinylquinoline) and poly(dimethylaminostyrene) in the presence of HBr depend essentially on the steric hindrance of the tertiary amine.     

Effect of aromatic substitution in aniline on the properties of polyaniline

Substitution in aniline has tremendous effect in the synthesis of poly(substituted anilines) as well as in their properties. In this investigation polyaniline (PANI), poly(m-nitro aniline) (PMNA), poly(m-amino phenol) (PMAP) and poly(o-ethyl aniline) (POEA) were synthesized by oxidative polymerization under identical conditions. Different properties were measured and compared with PANI to find out the presence of electron donating -OH group, electron withdrawing -NO₂ group and less effecting ethyl group on the properties of poly(substituted anilines). It was found that presence of any type of substitution in the benzene ring of aniline increases the solubility of the resulted polymer but reduces the yield, degree of polymerization, thermal stability, electrical and thermal conductivity. The colors, bulk density, particle size, percentage of crystallinity vary considerably depending on the nature of substitution.     

Effects of orientation on dynamic shear behavior of some amorphous polymers from 4.2° to 300°K

The dynamic shear behavior of four highly amorphous polymers in the unstretched and stretched states (draw ratios 3:1 to 6:1) was investigated with a torsion pendulum at temperatures from 4.2°K to 180–300°K and frequencies from 0.4 to 3.2 cps. The polymers studied were polystyrene, poly(vinyl acetate), poly(vinyl propionate), and poly(isobutyl vinyl ether). Previously unreported loss maxima were found at 48°K (1.5 cps) and 149°K (1.3 cps) for poly(vinyl proplonate), at 10°K (1.0 cps) for poly(vinyl acetate) and at 9°K (1.6 cps) for poly(isobutyl vinyl ether). Uniaxial orientation increased the shear storage modulus G, measured with the torsion axis parallel to the stretch direction and caused changes in the loss peaks which depended on the polymer material studied.