Na3V2(PO4)3/C nanofiber bifunction as anode and cathode materials for sodium-ion batteries

Journal of Solid State Electrochemistry - Na3V2(PO4)3/C composite nanofibers are prepared successfully through a coaxial electrospinning technique and subsequent calcination. The diameter of the...     

Research progress on Na3V2(PO4)2F3-based cathode materials for sodium-ion batteries

Sodium-ion batteries (SIBs) have received significant attention in large-scale energy storage due to their low cost and abundant resources. To obtain high-performance SIBs, many intensive studies about electrode materials have been carried out, especially the cathode material. As various types of cathode material for SIBs, a 3D open framework structural Na₃V₂(PO₄)₂F₃ (NVPF) with Na superionic conductor (NASICON) structure is a promising cathode material owing to its high operating potential and high energy density. However, its electrochemical properties are severely limited by the poor electronic conductivity due to the insulated [PO₄] tetrahedral unit. In this review, the challenges and strategies for NVPF are presented, and the synthetic strategy for NVPF is also analyzed in detail. Furthermore, recent developments of modification research to enhance their electrochemical performance are discussed, including designing the crystal structure, adjusting the electrode structure, and optimizing the electrolyte components. Finally, further research and application for future development of NVPF are prospected.     

Sodium vanadium nitridophosphate Na3V(PO3)3N as a high-voltage positive electrode material for Na-ion and Li-ion batteries

We report the preparation and electrochemical properties of Na₃V(PO₃)₃N made by ammonolysis. Na₃V(PO₃)₃N is reversibly oxidized to Na₂V(PO₃)₃N at high voltage (4.0 V vs. Na⁺/Na⁰ and 4.1 V vs. Li⁺/Li⁰) with an unusually small difference in the insertion/extraction voltage between both alkali metal reference electrodes. In both cases, the voltage hysteresis is extremely small (~ 0.035 V vs. sodium and ~ 0.065 V vs. lithium), which suggests facile migration of alkali cations within the structure. Further oxidation to NaV(PO₃)₃N is predicted to occur beyond the voltage stability window of the electrolytes.     

NaV(SO4)2/C,Na3V(SO4)3/C,and K2VO(SO4)2/C: three Li-free vanadium sulfate cathode materials for lithium-ion batteries

Journal of Solid State Electrochemistry - In this study, three Li-free polyanion vanadium sulfates containing Na/K alkali metals were successfully synthesized by a facile solid-state method at...     

Nano-structured Li3V2(PO4)3/carbon composite for high-rate lithium-ion batteries

Nano-structured Li₃V₂(PO₄)₃/carbon composite (Li₃V₂(PO₄)₃/C) has been successfully prepared by incorporating the precursor solution into a highly mesoporous carbon with an expanded pore structure. X-ray diffraction analysis, scanning electron microscopy, and transmission electron microscopy were used to characterize the structure of the composites. Li₃V₂(PO₄)₃ had particle sizes of < 50 nm and was well dispersed in the carbon matrix. When cycled within a voltage range of 3 to 4.3 V, a Li₃V₂(PO₄)₃/C composite delivered a reversible capacity of 122 mA h g^? 1 at a 1C rate and maintained a specific discharge capacity of 83 mA h g^? 1 at a 32C rate. These results demonstrate that cathodes made from a nano-structured Li₃V₂(PO₄)₃ and mesoporous carbon composite material have great potential for use in high-power Li-ion batteries.     

Synthesis and performance of carbon-coated Li3V2(PO4)3 cathode materials for lithium-ion batteries

The carbon-coated monoclinic Li₃V₂(PO₄)₃ (LVP/C) cathode materials can be synthesized by one-step heat treatment from a sucrose-containing precursor. Properties of the prepared composite material were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), pore size distribution and specific surface area analyzer, optical particle size analyzer and electrochemical methods. X-ray diffraction results show that LVP sample is monoclinic structure. The sample presents initial discharge capacity of 127.2 mA h/g (at 0.2 C rate), and exhibits better cycling stability (115.1 mA h/g at 30th cycle at 0.2 C rate) and better rate capability (83.1 mA h/g at 50th cycle under 6 C rate) in the voltage range of 3.0–4.3 V. In the voltage range of 3.0–4.8 V, it exhibits a initial discharge capacity of 169.1 mA h/g and good cycling stability (104.9 mA h/g at 20th cycle at 0.5 C rate).     

Low-temperature behavior of Li3V2(PO4)3/C as cathode material for lithium ion batteries

The electrochemical performance of Li₃V₂(PO₄)₃/C was investigated at various low temperatures in the electrolyte 1.0 mol dm⁻³ LiPF₆/ethyl carbonate (EC)+diethyl carbonate (DEC)+dimethyl carbonate (DMC) (volume ratio 1:1:1). The stable specific discharge capacity is 125.4, 122.6, 119.3, 116.6, 111.4, and 105.7 mAh g⁻¹ at 26, 10, 0, −10, −20, and −30 °C, respectively, in the voltage range of 2.3–4.5 V at 0.2 C rate. When the temperature decreases from −30 to −40 °C, there is a rapid decline in the capacity from 105.7 to 69.5 mAh g⁻¹, implying that there is a nonlinear relationship between the performance and temperature. With temperature decreasing, R _ct (corresponding to charge transfer resistance) increases rapidly, D (the lithium ion diffusion coefficients) decreases sharply, and the performance of electrolyte degenerates obviously, illustrating that the low-temperature electrochemical performance of Li₃V₂(PO₄)₃/C is mainly limited by R _ct, D _Li, and electrolyte.     

Ionothermal synthesis and rate performance studies of nanostructured Li3V2(PO4)3/C composites as cathode materials for lithium-ion batteries

Various structures and morphologies of Li₃V₂(PO₄)₃ precursors are synthesized by a novel ionothermal method using three kinds of imidazolium-based ionic liquids as both reaction mediums and structure-directing agents at ambient pressure. Nanostructured Li₃V₂(PO₄)₃/C cathode materials can be successfully prepared by a subsequent short calcination process. The structures, morphologies, and electrochemical properties are characterized by X-ray diffractometry, thermogravimetry, scanning and transmission electron microscopy, charge–discharge test, cyclic voltammetry, and electrochemical impedance spectroscopy. It shows that three kinds of materials synthesized present different morphologies and particle sizes. The result can be due to imidazolium-based ionic liquids, which combined with different anions play important role in forming the size and morphology of Li₃V₂(PO₄)₃ material. These materials present excellent performance with high rate capacity and cycle stability. Especially, the Li₃V₂(PO₄)₃/C material prepared in 1-ethyl-3-methylimadozolium trifluoromethanesulfonate ([emim][OTf]) can deliver discharge capacities of 127.4, 118.9, 105.5, and 92.8 mAh?g^?1 in the voltage range of 3.0–4.3 V at charge–discharge rate of 0.1, 1, 10, and 20 C after 50 cycles, respectively. The excellent rate performance can be attributed to the uniform nanostructure, which can make the lithium-ion diffusion and electron transfer more easily across the Li₃V₂(PO₄)₃/electrolyte interfaces.     

A robust carbon coating of Na3V2(PO4)3 cathode material for high performance sodium-ion batteries

Na₃V₂(PO₄)₃ is a very prospective sodium-ion batteries (SIBs) electrode material owing to its NASICON structure and high reversible capacity. Conversely, on account of its intrinsic poor electronic conductivity, Na₃V₂(PO₄)₃ electrode materials confront with some significant limitations like poor cycle and rate performance which inhibit their practical applications in the energy fields. Herein, a simple two-step method has been implemented for the successful preparation of carbon-coated Na₃V₂(PO₄)₃ materials. As synthesized sample shows a remarkable electrochemical performance of 124.1 mAh/g at 0.1 C (1 C = 117.6 mA/g), retaining 78.5 mAh/g under a high rate of 200 C and a long cycle-performance (retaining 80.7 mAh/g even after 10000 cycles at 20 C), outperforming the most advanced cathode materials as reported in literatures.     

Synthesis and electrochemical properties of Li3V2(PO4)3/C with one-dimensional (1D) nanorod structure for cathode materials of lithium-ion batteries

A series of Li₃V₂(PO₄)₃/C cathode materials with different morphologies were successfully prepared by controlling temperatures using maleic acid as carbon source via a simple sol–gel reaction method. The Li₃V₂(PO₄)₃/C nanorods synthesized at 700 °C with diameters of about 30–50 nm and lengths of about 800 nm show the highest initial discharge capacity of 179.8 and 154.6 mA h g⁻¹ between 3.0 and 4.8 V at 0.1 and 0.5 C, respectively. Even at a discharge rate of 0.5 C over 50 cycles, the products still can deliver a discharge capacity of 140.2 mA h g⁻¹ in the potential region of 3.0–4.8 V. The excellent electrochemical performance can be attributed to one-dimensional nanorod structure and uniform particle size distribution. All these results indicate that the resulting Li₃V₂(PO₄)₃/C is a very strong candidate to be a cathode in a next-generation Li-ion battery for electric-vehicle applications.     

Li3V2(PO4)3/graphene nanocomposites as cathode material for lithium ion batteries

Li(3)V(2)(PO(4))(3)/graphene nanocomposites have been firstly formed on reduced graphene sheets as cathode material for lithium batteries. The nanocomposites synthesized by the sol-gel process exhibit excellent high-rate and cycling stability performance, owing to the nanoparticles connected with a current collector through the conducting graphene network.     

K3Ga2(PO4)3 and Na3Ga(PO4)2

The structures of tripotassium digallium tris(phosphate), K₃Ga₂(PO₄)₃, and trisodium gallium bis(phosphate), Na₃Ga(PO₄)₂, have different irregular one‐dimensional alkali ion‐containing channels along the a axis of the orthorhombic and triclinic unit cells, respectively. The anionic subsystems consist of vortex‐linked PO₄ tetrahedra and GaO₄ tetrahedra or GaO₅ trigonal bipyramids in the first and second structure, respectively.     

The Synthesis of Porous Na3V2(PO4)3 for Sodium-Ion Storage

Na₃V₂(PO₄)₃ (NVP) has been regarded as a potential cathode material for sodium-ion batteries (SIBs) due to its excellent structural stability and rapid Na⁺ conductivity. However, its electrochemical performances are restricted by the large bulk structure and poor electronic conductivity. The construction of porous NVP materials is a powerful method to improve the electrochemical properties. This concept aims to provide an overview of recent progress of porous NVP materials for SIBs. Herein, the synthetic strategies and formation mechanisms of porous NVP materials as well as the relationship between the porous structures and electrochemical performances of NVP materials are reviewed. Furthermore, the challenges and prospects for the preparation of porous NVP materials in this field are outlined.     

Vibrational analysis of Ag3(PO2NH)3, Na3(PO2NH)3 x H2O, Na3(PO2NH)3 x 4H2O,

FT IR and FT Raman spectra of Ag3(PO2NH), (Compound 1), Na3(PO2NH)3 x H2O (Compound II), Na3(PO2NH)3 x 4H2O (Compound III), [C(NH2)3]3(PO2NH)3 x H2O (Compound IV) and (NH4)4(PO2NH)4 x 4H2O (Compound V) are recorded and analyzed on the basis of the anions, cations and water molecules present in each of them. The PO2NH- anion ring in compound I is distorted due to the influence of Ag+ cation. Wide variation in the hydrogen bond lengths in compound III is indicated by the splitting of the v2 and v3 modes of vibration of water molecules. The NH4 ion in compound V occupies lower site symmetry and exhibits hindered rotation in the lattice. The correlations between the symmetric and asymmetric stretching vibrations of P-N-P bridge and the P-N-P bond angle have also been discussed.     

Wet coordination method to prepare carbon-coated Li3V2(PO4)3 cathode material for lithium ion batteries

A convenient method named wet coordination is used to prepare the sample or carbon-coated Li₃V₂(PO₄)₃ in the furnace with a flowing argon atmosphere at 600 °C for 1 h. The sample is characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM) and energy dispersive analysis of X-rays (EDAX). Galvanostatic charge–discharge between 3.3 and 4.3 V (vs. Li/Li⁺) shows that the sample exhibits a high discharge capacity of 128 mAh g^?1 with a good reversible performance under a current density of 95 mA g^?1. It suggests that carbon-coated Li₃V₂(PO₄)₃ with good electrochemical performance can be obtained via this method, which is suitable for large-scale production.     

Modified Pechini synthesis of Na3Ce(PO4)2 and thermochemistry of its phase transition

Effect of the synthesis conditions of Pechini technique on crystallinity and purity of Na₃Ce(PO₄)₂ compound was investigated. Nano-sized cerium-sodium phosphate obtained when EDTA was used as an additional chelating agent for Ln³⁺. The total enthalpy change of Na₃Ce(PO₄)₂ phase transition was determined as 14.2±0.7 kJ mol⁻¹ for sample synthesized by conventional solid-solid reaction. The phase transition process was confirmed to occur at 1060°C or in temperature range 920–1060°C depending on thermal treatment of powders.     

Effects of phenolic resin on the electrochemical performance of Li3V2(PO4)3/C cathode materials

As a kind of lithium-ion battery cathode material, monoclinic lithium vanadium phosphate/carbon Li₃V₂(PO₄)₃/C was synthesized by adopting phenolic resin as carbon source, both for reducing agent and coating material. The crystal structure and morphology of the samples were characterized through X-ray diffraction (XRD) and scanning electron microscope (SEM). Galvanostatic charge-discharging experiments and electrochemical impedance spectrum (EIS) were utilized to determine the electrochemical insertion properties of the samples. XRD data revealed that phenolic resin does not change the crystal structure of Li₃V₂(PO₄)₃/C. Furthermore, the morphology of grains and the electronic conductivity of Li₃V₂(PO₄)₃/C were improved. Galvanostatic charge-discharging and EIS results showed that the optimal electrochemical properties and the minimum charge-transfer resistance of Li₃V₂(PO₄)₃/C can be reached when added by 5 wt.% of redundant carbon (except the carbon needed to reduce V⁵⁺ to V³⁺). The initial discharge capacity is 128.4 mAh g^?1 at 0.2 C rate and 101.2 mAh g^?1 at 5 C in the voltage range of 3.0～4.3 V.     

可见光响应的Co3(PO4)2/Ag3PO4纳米复合光催化剂的制备及表征

采用简单的化学偏聚法合成出Ag3PO4纳米颗粒、磷酸钴(Co3(PO4)2,CoP)纳米片以及它们两者的纳米复合结构(CoP/Ag3PO4),同时还比较了它们的可见光催化活性.采用场发射扫描电镜(FESEM)、X射线衍射(XRD)、紫外-可见(UV-Vis)吸收光谱以及光致发光谱等手段对其形貌、结构、光学以及可见光催化性能等进行表征.结果表明,CoP/Ag3PO4复合纳米结构的可见光降解甲基橙(MO)的速率和循环稳定性均明显优于其它两种物质.这表明CoP应该起着共催化剂的作用,它能够抑制光生电子与空穴之间的复合,并且提供大量高活性的光生空穴.此外,我们还发现CoP/Ag3PO4降解另一种阳离子型染料——罗丹明B(RhB)的能力则远不如纯Ag3PO4,这可能是与光催化剂的表面性质发生改变有关,造成更低的RhB吸附能力.本文提供了一种廉价制备高效可见光催化剂的新方法.     

可见光响应的CO3(PO4)2/Ag3PO4纳米复合光催化剂的制备及表征

采用简单的化学偏聚法合成出Ag3PO4纳米颗粒、磷酸钴(Co3(PO4)2,CoP)纳米片以及它们两者的纳米复合结构(CoP/Ag3PO4),同时还比较了它们的可见光催化活性.采用场发射扫描电镜(FESEM)、X射线衍射(XRD)、紫外-可见(UV-Vis)吸收光谱以及光致发光谱等手段对其形貌、结构、光学以及可见光催化性能等进行表征.结果表明,CoP/Ag3PO4复合纳米结构的可见光降解甲基橙(MO)的速率和循环稳定性均明显优于其它两种物质.这表明CoP应该起着共催化剂的作用,它能够抑制光生电子与空穴之间的复合,并且提供大量高活性的光生空穴.此外,我们还发现CoP/Ag3PO4降解另一种阳离子型染料——罗丹明B(RhB)的能力则远不如纯Ag3PO4,这可能是与光催化剂的表面性质发生改变有关,造成更低的RhB吸附能力.本文提供了一种廉价制备高效可见光催化剂的新方法.     

A Li3V2(PO4)3/C thin film with high rate capability as a cathode material for lithium-ion batteries

A monoclinic lithium vanadium phosphate (Li₃V₂(PO₄)₃) and carbon composite thin film (LVP/C) is prepared via electrostatic spray deposition. The film is studied with X-ray diffraction, scanning and transmission electron microscopy and galvanostatic cell cycling. The LVP/C film is composed of carbon-coated Li₃V₂(PO₄)₃ nanoparticles (50 nm) that are well distributed in a carbon matrix. In the voltage range of 3.0–4.3 V, it exhibits a reversible capacity of 118 mA h g^?1 and good capacity retention at the current rate of 1 C, while delivers 80 mA h g^?1 at 24 C. These results suggest a practical strategy to develop new cathode materials for high power lithium-ion batteries.