A novel polyacrylonitrile-based porous structure gel polymer electrolyte composited by incorporating polyhedral oligomeric silsesquioxane by phase inversion method

A novel polyhedral oligomeric silsesquioxane (POSS) composite polyacrylonitrile (PAN)-based porous structure gel polymer electrolyte (GPE) is prepared by phase inversion method. The POSS additive filler is firstly obtained in the dehydration condensation reaction of vinyltrimethoxysilane (VTMS) and 3-methacryloxypropyltrimethoxysilane (MPTMS). The composition and structure of synthetic POSS and the prepared POSS composite PAN-based GPEs are investigated. It is found that compared with pure PAN-based GPE, the POSS composite PAN-based GPE with 8 wt.% POSS presents the homogeneous pore distribution and abundant electrolyte uptake (540.4 wt.%), which endows GPE-8% with the excellent comprehensive performances: the highest ionic conductivity of 2.62?×?10^?3 S cm^?1 at room temperature, the higher lithium ion transference number of 0.38, the good compatibility with lithium anode, and the higher electrochemical stability window of 5.7 V (vs. Li/Li⁺). At 0.2 C, the GPE-8%-based lithium ion battery produces a satisfactory discharge capacity of 140 mAh g^?1.

Open image in new window

Graphical abstract ?

     

Polyhedral oligomeric silsesquioxane-modified gel polymer electrolyte based on matrix of poly(methyl methacrylate-maleic anhydride)

Journal of Solid State Electrochemistry - In the present work, the copolymer of poly(methyl methacrylate-maleic anhydride) P(MMA-MAh)-based gel polymer electrolytes (GPEs) with a polyhedral...     

Surface modification of gold nanoparticles with polyhedral oligomeric silsesquioxane and incorporation within polymer matrices

A new approach to achieve polymer‐mediated gold ferromagnetic nanocomposites in a polyhedral oligomeric silsesquioxane (POSS)‐containing random copolymer matrix has been developed. Stable and narrow distributed gold nanoparticles modified by 3‐mercaptopropylisobutyl POSS to form Au‐POSS nanoparticles are prepared by two‐phase liquid‐liquid method. These Au‐POSS nanoparticles form partial particle aggregation by blending with poly(n‐butyl methacrylate) (PnBMA) homopolymer because of poor miscibility between Au‐POSS and PnBMA polymer matrix. The incorporation the POSS moiety into the PnBMA main chain as a random copolymer matrix displays well‐dispersed gold nanoparticles because the POSS‐POSS interaction enhances miscibility between gold nanoparticles and the PnBMA‐POSS copolymer matrix. This gold‐containing nanocomposite exhibits ferromagnetic phenomenon at room temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 811–819, 2009     

Cross-linking of carboxyl-terminated nitrile rubber with polyhedral oligomeric silsesquioxane

Glycidyl polyhedral oligomeric silsesquioxane (POSS) was used as a cross-linking agent to prepare a new organic–inorganic hybrid material from carboxyl-terminated poly(acrylonitrile-co-butadiene) (CTBN). The structure of the reacted material was characterized by Fourier transform infrared spectroscopy. Differential scanning calorimetry (DSC) at different heating rates in the presence and absence of catalyst, triphenyl phosphine (TPP), was conducted to investigate the curing kinetics. The reaction is catalyzed by the addition of TPP, and rate is maximum at higher catalyst concentrations. Different kinetic models were used to analyze the kinetic parameters. The effect of catalyst on curing process was determined by calculating the activation energy (E _a) using Kissinger method. Dependency of E _a with extent of conversion was monitored by different isoconversional methods. The curing mechanism of POSS–CTBN system followed autocatalytic model. Moreover, the predicted curves from the kinetic models fit well with the non-isothermal DSC curve. The E _a of gelation obtained from rheological studies matched with that from DSC study, in league with the Flory’s theory of cross-linking.     

Preparation and properties of polyhedral oligomeric silsesquioxane polymers

Polyhedral oligomeric silsesquioxane (POSS) polymers were synthesized by the dehydrogenative condensation of (HSiO_3/2)₈ with water in the presence of diethylhydroxylamine followed by trimethylsilylation. Coating films were prepared by spin‐coating of the coating solution prepared by the dehydrogenative condensation of POSS. The hardness of the coating films was evaluated using a pencil‐hardness test and was found to increase up to 8H with increases in the curing temperature. Free‐standing film and silica gel powder were prepared by aging the coating solution at room temperature. The silica gel powder was subjected to heat treatment under air atmosphere to show a specific surface area of 440 m² g⁻¹ at 100 °C, which showed a maximum at 400 °C as 550 m² g⁻¹. Copyright © 2011 John Wiley & Sons, Ltd.     

Flame retardant and mechanism of vinyl ester resin modified by octaphenyl polyhedral oligomeric silsesquioxane

Flamability is one of the major issues for utilization of bisphenol A–type vinyl ester resin (VER) polymeric composites in practical applications. The thermal stability and mechanical property of VER composites containing octaphenyl polyhedral oligomeric silsesquioxane (OPS) were investigated and discussed in detail. With increasing the mass ratio of OPS, the residues yield at 800°C and bending strength at break of the VER/OPS composites were enhanced, accompanied with the gradually decreased values of the peak heat release rate, total heat release, and total smoke release due to the formation of dense carbon/silica protective layers that acted as a barrier to heat and mass transfer. In addition, the flame‐retardant mechanisms of condensed phase and gas phase were analyzed by XPS, TGA‐FTIR, and GC‐MS. The results showed that when OPS was incorporated to the resin matrix, the characteristic peaks intensity of the gaseous products was reduced obviously due to some of the characteristic groups still retained in condensed phase. Therefore, the significance of this work is providing an optional method to fabricate flame‐retarding VER composites with excellent mechanical properties.     

The mechanical properties of crystalline cyclopentyl polyhedral oligomeric silsesquioxane

The anisotropic elastic constants of crystalline octacyclopentyl polyhedral oligomeric silsesquioxane (CpPOSS) were determined using molecular dynamics. The force field used for these calculations was shown to model accurately the rhombohedral and triclinic crystal structures of octasilsesquioxane and CpPOSS, respectively, as well as the vibrational frequencies of octasilsesquioxane. The moduli for CpPOSS are anisotropic, with a Reuss-averaged bulk modulus of 7.5 GPa, an isotropic averaged Young's modulus of 11.78 GPa, and an isotropic averaged shear modulus of 4.75 GPa. These isotropic averages or, alternatively, the full anisotropic stiffness tensor of the crystal can be used with micromechanical composite models to calculate the effective elastic properties of polymer nanocomposites that contain crystalline aggregates of CpPOSS.     

Network structures of polyhedral oligomeric silsesquioxane based nanocomposites: a Monte Carlo study

The network structures of polyhedral oligomeric silsesquioxane based nanocomposites are studied by continuous-space Monte Carlo simulations. The nanoporous network contains intercubic pores and mesopores which can be clearly identified in this work. In terms of degree of cross linking and pore size distribution (PSD), effects of linker length, tether rigidity, and number of reactive tethers are examined. It is found that the extent of cross linking as well as the intercubic pore size of the network increases as linker length increases which are consistent with experimental findings. However, the mesopores appear to shift to a smaller radii regime for networks with longer linkers. Networks with rigid tethers contain lots of free linkers, thus, low cross linking density and narrow PSD are observed. On the other hand, reduction of the reactive tethers shows an insignificant effect on the degree of cross linking of the system. The fact that the intercubic pore size increases as the number of reactive tethers decreases causes the nanobuilding blocks to possess larger free volumes and distribute themselves more evenly throughout the system. As a result, it reduces the possibility of forming large mesopores.     

Novel,tadpole-shaped,polyhedral oligomeric silsesquioxane containing sulfonated block copolymer for humidity sensing

Due to the “trade-off” effect between the high water adsorption and low stability under high Relative Humidity of polymer matrix, fabrication of resistive-type polymer-based humidity sensors with a wide impedance response and excellent stability in high relative humidity remains a great challenge. Aim at solving that, a novel polymeric humidity sensing matrix, specifically a tadpole-shaped, polyhedral oligomeric silsesquioxane (POSS) containing block copolymers (BCPs) of POSS-poly(methyl methacrylate)-polystyrene (POSS-PMMA-SPS) were proposed. This novel BCP was synthesized using atom transfer radical polymerization (ATRP) employing a two-step approach, and following post sulfonation, a series of sulfonated BCPs (POSS-PMMA-SPS) with different sulfonation degree was obtained. The subject humidity sensors were produced using different sulfonated BCPs employing a dip-coating technique, and three wide-impedance response humidity sensors were produced. Each of these sensors exhibited an excellent humidity-sensing response of more than 10⁴ within the humidity range from 11% to 95% RH. In particular, the humidity sensor S-6 that had a proper degree of sulfonation presented a relatively fast response (t_90% of 11 s and 80 s in both the water adsorption and desorption processes), and superior repeatability for more than 30 days.     

Miscibility and hydrogen-bonding behavior in organic/inorganic polymer hybrids containing octaphenol polyhedral oligomeric silsesquioxane

In this study, we investigated the miscibility behavior and mechanism of interaction of poly(methyl mechacrylate) (PMMA), poly(vinyl pyrrolidone) PVP, and PMMA- co-PVP blends with octa(phenol)octasilsequioxane (OP-POSS). For the PMMA/OP-POSS binary blend, the value of the association constant ( K A = 29) was smaller than that in the poly(vinyl phenol) (PVPh)/PMMA ( K A = 37.4) and ethyl phenol (EPh)/PMMA ( K A = 101) blend systems, implying that the phenol groups of the OP-POSS units in the PMMA/OP-POSS blends interacted to a lesser degree with the CO groups of PMMA than they did in the other two systems. In addition, the ionic conductivity of a LiClO4/PMMA- co-PVP polymer electrolyte was increased after blending with OP-POSS.     

Synthesis of peptide dendrimers with polyhedral oligomeric silsesquioxane cores via click chemistry

Inorganic polyhedral oligomeric silsesquioxane (POSS) was used as the core for the synthesis of poly(Llysine) peptide dendrimer via copper-catalyzed azide-alkyne click chemistry. The inorganic/organic composite dendrimer was characterized by MS, 1H NMR, FTIR, GPC and DLS.     

Rheological behavior of polypropylene/octavinyl polyhedral oligomeric silsesquioxane composites

The reactive blending composites of isotactic polypropylene (PP)/octavinyl polyhedral oligomeric silsesquioxane (POSS) were prepared in the presence of dicumyl peroxide. Comparison of the rheological behavior of physical and reactive blending composites was made by oscillatory rheological measurements. It was found that the viscosity of physical blending composites drops at lower POSS content (0.5–1 wt %) and thereafter increases with increasing POSS content; that of reactive blending composites increases with increasing POSS content and displays a solid‐like rheological behavior at low frequency region when POSS content is higher than 1 wt %. The deviation of reactive blending composites from the scaling log G′–log G″ of linear polymer in Han plot, upturning at high viscosity in Cole–Cole plot, and from van Gurp–Palmen plot are related to the gelation behavior reactively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 526–533, 2008     

A novel poly-benzoxazinyl functionalized polyhedral oligomeric silsesquioxane and its nanocomposite with polybenzoxazine

The novel poly-benzoxazinyl functionalized polyhedral oligomeric silsesquioxane macromonomer (BZ-POSS), containing 7.6 benzoxazine groups per molecule on average was synthesized from octaaminophenylsilsesquioxane, p-cresol and paraformaldehyde. BZ-POSS was well miscible with bisphenol A-based benzoxazine (BBZ) melt. By ring-opening copolymerization of BBZ and BZ-POSS under condition similar to that used for polymerizing neat BBZ, the transparent and uniform BBZ/BZ-POSS organic-inorganic hybrid nanocomposites were prepared. The nano-scale dispersion of POSS cores in the nanocomposite was verified by powder X-ray diffraction and transmission electron microscopy studies. Dynamic mechanical analyses and thermal gravimetric analysis indicated that thermal stabilities, cross-link densities and the flame retardance of the nanocomposites were increased in comparison with neat PBBZ resin, although only small amounts of inorganic POSS cores were incorporated into the systems. Structural analyses of BZ-POSS and BBZ/BZ-POSS nanocomposites are discussed herein.     

Synthesis,characterization and catalytic application of a new organometallic oligomer based on polyhedral oligomeric silsesquioxane

Although homogeneous catalysts provide high performance and selectivity, the difficulty of separation and recycling of these catalysts has bothered the scientific community worldwide. Therefore, the demand for heterogeneous catalysts that possess the advantages of homogeneous ones, with ease of separation and recyclability remains a topic of major impact. The oligomeric catalyst synthesized in this work was characterized using elemental analysis, Fourier transform infrared, ¹³C NMR, ²⁹Si NMR and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy and Brunauer–Emmett–Teller analysis and compared to its homogeneous counterpart [W(CO)₃Br₂(ATC)] in the epoxidation of 1‐octene, cyclooctene, (S )‐limonene, cis ‐3‐hexen‐1‐ol, trans ‐3‐hexen‐1‐ol and styrene. The results showed that the percentage conversion for the homogeneous species [W(CO)₃Br₂(ATC)] was slightly higher than for the oligomeric catalyst (POSS‐ATC‐[W(CO)₃Br₂]). Furthermore, the selectivity for epoxide of the oligomeric catalyst was greater than that of the homogeneous catalyst by about 25% when (S )‐limonene was used. Great conversions (yields) of products were obtained with a wide range of substrates and the catalyst was recycled many times without any substantial loss of its catalytic activity.     

Surface characteristics of polyhedral oligomeric silsesquioxane modified clay and its application in polymerization of macrocyclic polyester oligomers

Novel porous aminopropyllsooctyl polyhedral oligomeric silsesquioxane (POSS) modified montmorillonite clay complexes (POSS-Mts) with large interlayer distance and specific surface area have been successfully prepared via ion-exchange reaction and followed by freeze-drying treatment. The morphology of the POSS-Mts is highly influenced by the POSS concentration, pH of the suspension and drying procedure, but the interlayer distance of the POSS-Mts does not change much when the POSS concentration is above 0.4 CEC. The POSS-Mts were used as Sn-catalyst supporters to initiate the ring-opening polymerization of cyclic butylene terephthalate oligomers (CBT) for the first time. No diffraction peak was detected by wide-angle X-ray diffraction for the polymerized composites (pCBT/POSS-Mt), even at 10 wt % loading of POSS-Mt. A clay network rather than exfoliation structure was observed unexpectedly in the composites by transmission electron microscopy. The pCBT/POSS-Mt composite with 10 wt % POSS-Mt was further melt-compounded with commercial PBT resin as a master batch. The tensile properties of the resultant PBT/POSS-Mt composites were highly improved as compared to the pristine PBT due to the homogeneous dispersion of POSS-Mt in the PBT matrix.     

Nanocomposites through copolymerization of a polyhedral oligomeric silsesquioxane and methyl methacrylate

The mechanical properties and thermal stability of polymers can be enhanced through the formation of nanocomposites. Nanocomposites consisting of hybrid copolymers of methacrylcyclohexyl polyhedral oligomeric silsesquioxane (POSS‐1) and methyl methacrylate (MMA) with up to 92 wt % (51 mol %) POSS‐1 and with superior thermal properties were synthesized using solution polymerization. The POSS‐1 contents of the copolymers were similar to or slightly higher than those in the feeds, the polydispersity indices were relatively low, and the degree of polymerization decreased with increasing POSS‐1 content. POSS‐1 enhanced the thermal stability, increasing the degradation temperature, reducing the mass loss, and preventing PMMA‐like degradation from propagating along the chain. The mass loss was reduced in a high POSS‐1 content copolymer since the polymerization of POSS‐1 with itself reduced sublimation. Exposure to 450 °C produced cyclohexyl‐POSS‐like remnants in the POSS‐1 monomer and in all the copolymers. The degradation of these remnants, for the copolymers and for the POSS‐1 monomer, yielded 75% SiO₂ and an oxidized carbonaceous residue. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4264–4275, 2007     

Thermal behaviour of a polyhedral oligomeric silsesquioxane with epoxy resin cured by diamines

A new material belongs to the family of polyhedral oligomeric silsesquioxanes, the 1-(3-glycidyl) propoxy-3,5,7,9,11,13,15-isobutylpentacyclo-[9.5.1.1(3,9).1(5,15).1(7,13)]octasiloxane (glycidylisobutyl-POSS) is characterized by differential scanning calorimetry, thermogravimetric analysis and atomic force microscopy. Epoxy systems based on diglycidyl ether of bisphenol A (DGEBA) cured with the diamines, 4,4'-diamine-diphenylmethane (DDM) and 1,4-phenylenediamine (pPDA), were kinetically studied by differential scanning calorimetry in isothermal and dynamic modes. The thermal behaviour of these systems as the glycidylisobutyl-POSS was added, is discussed later. This revised version was published online in July 2006 with corrections to the Cover Date.