A Non‐Enzymatic Hydrogen Peroxide Sensor Based on Gold Nanoparticles/Carbon Nanotube/Self‐Doped Polyaniline Hollow Spheres

In this study, a novel non‐enzymatic hydrogen peroxide (H₂O₂) sensor was fabricated based on gold nanoparticles/carbon nanotube/self‐doped polyaniline (AuNPs/CNTs/SPAN) hollow spheres modified glassy carbon electrode (GCE). SPAN was in‐site polymerized on the surface of SiO₂ template, then AuNPs and CNTs were decorated by electrostatic absorption via poly(diallyldimethylammonium chloride). After the SiO₂ cores were removed, hollow AuNPs/CNTs/SPAN spheres were obtained and characterized by transmission electron microscopy (TEM), field‐emission scanning electron microscopy (FESEM) and Fourier transform infrared spectroscopy (FTIR). The electrochemical catalytic performance of the hollow AuNPs/CNTs/SPAN/GCE for H₂O₂ detection was evaluated by cyclic voltammetry (CV) and chronoamperometry. Using chronoamperometric method at a constant potential of ?0.1 V (vs. SCE), the H₂O₂ sensor displays two linear ranges: one from 5 µM to 0.225 mM with a sensitivity of 499.82 µA mM^?1 cm^?2; another from 0.225 mM to 8.825 mM with a sensitivity of 152.29 µA mM^?1 cm^?2. The detection limit was estimated as 0.4 µM (signal‐to‐noise ratio of 3). The hollow AuNPs/CNTs/SPAN/GCE also demonstrated excellent stability and selectivity against interferences from other electroactive species. The sensor was further applied to determine H₂O₂ in disinfectant real samples.     

Ultra low field emission characteristics of chloride doped polypyrrole films

Field emission characteristics of chloride doped polypyrrole (Cl‐PPy) films have been investigated. For this purpose, freestanding Cl‐PPy films have been synthesized by interfacial polymerization from two different monomer (pyrrole) concentrations (1 and 0.1 M), keeping the monomer to oxidant (FeCl₃) concentration ratio equal to 1. The surface morphology of these Cl‐PPy films, as revealed from scanning electron microscopy, was found to be granular in nature. The average grain size of films prepared using 1 and 0.1 M pyrrole concentrations were ～2.5 and ～1 µm, respectively. The measured threshold field, that is, field required to draw an emission current density of 10 µA/cm², for these two films were 0.27 and 0.15 V/µm, respectively. From these films, a maximum current density of 1 mA/cm² could be drawn at an electric field of 0.42 and 0.29 V/µm, respectively. The field emission current (investigated at a preset value of 1 µA) was found to be very stable up to 3h, suggesting utility of Cl‐PPy films as a novel material for field emission based applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Gold Nanobone/Carbon Nanotube Hybrids for the Efficient Nonenzymatic Detection of H2O2 and Glucose

We report a facile strategy for the synthesis of gold nanobone/carbon nanotube (CNT@GNB) nanoassemblies, which were prepared through hybridization of CNTs and GNBs mediated by a thiolated pyrene derivative. The SEM images confirmed the successful construction of the CNT@GNB nanoassemblies. Screen printed electrodes modified with the CNT@GNB nanoassemblies exhibited decent electrocatalytic activity, large surface‐to‐volume ratios, high electrochemical reversibility, and efficient electron transport properties, thereby enabling stable and sensitive nonenzymatic detection of H₂O₂ and glucose, with detection limits of 0.8 µM and 0.07 mM, respectively. Moreover, no interference was observed at a potential of +0.38 V for the interfering species, such as ascorbic acid and urea, indicating high selectivity toward the glucose detection.     

Electron field emission of iron and cobalt‐doped DLC films fabricated by electrochemical deposition

Using a simple electrochemical depositing process, iron and cobalt‐doped diamond‐like carbon (DLC) films were deposited on Si (100) substrates. The results showed that metallic elements were inhomogeneously doped into highly cross‐linking amorphous carbon matrix, forming the typical nanocrystalline/amorphous nanocomposite structure, and simultaneously the microsturcture of amorphous carbon was changed by the doping of metals. Field emission performance showed that the incorporation of iron and cobalt effectively decreases the threshold field from 13.5 V/µm to 8.0 V/µm and 6.5 V/µm, respectively, and a highest current density of the Co‐DLC film was about 1.2 mA/cm² at the electric field of 23.5 V/µm. Copyright © 2012 John Wiley & Sons, Ltd.     

Fully printed flexible audio system on the basis of low‐voltage polymeric organic field effect transistors with three layer dielectric

Fully mass printed, flexible and truly polymeric organic field effect transistors consisting of a three layer dielectric made of CYTOP (low‐k), PVA (intermediate) and P(VDF‐TrFE‐CTFE)(high‐k) are introduced. Gravure‐, flexo‐and screen printing were selected as highly productive manufacturing technologies. These OFETs work at strongly reduced voltages and show high field effect mobility (µ = 0.2 cm²/Vs) and remarkable good bias stress stability at very high current density (50 µA/mm). Fully printed OFETs are used for the realization of ring oscillators working in the kHz regime at reduced supply voltage (10 V). In combination with printed fully polymeric piezoelectric loudspeakers, this work shows for the first time fully printed flexible audio systems. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1409–1415     

Synthesis of Functionalized MWCNTs Decorated with Copper Nanoparticles and Its Application as a Sensitive Sensor for Amperometric Detection of H2O2

Functionalized‐multiwall carbon nanotubes decorated with redox active copper nanoparticles have been fabricated for sensitive enzyme‐less H₂O₂ detection. The new nanocomposite was characterized by Transmission electron microscopy, energy dispersive X‐ray analysis and cyclic voltammetry. The response of the modified electrode to H₂O₂ was examined using amperometry at ?0.45 V vs. Ag/AgCl in a buffer solution at pH 10.0. The developed sensor displayed linear concentration ranges of 0.5–10.0 and 10.0–10000.0 µmol L^?1 with a detection limit of 0.3 µmol L^?1. The proposed sensor displayed good selectivity for H₂O₂ detection in the presence of common interferences such as ascorbic acid.     

Preparation of an Electrode Modified with an Electropolymerized Film as a Mediator of NADH Oxidation and Its Application in an Ethanol/O2 Biofuel Cell

This paper reports a novel mediator for the oxidation of β‐nicotinamide adenine dinucleotide (NAD⁺/NADH), an electropolymeric film (pAPRu) of [Ru(NH₂‐phen)₃]²⁺. A pAPRu‐modified electrode was prepared via electropolymerization and exhibited catalytic activity toward the electrochemical oxidation of NADH due to the imine moieties of pAPRu. The electrochemical oxidation of ethanol was observed using an alcohol dehydrogenase (ADH)‐immobilized electrode. A compartmentless ethanol/O₂ biofuel cell composed of an ADH anode and a bilirubin oxidase cathode was constructed. The maximum current density and the maximum power density of the biofuel cell were 190 µA cm^?2 and 31 µW cm^?2 (at 0.29 V), respectively.     

V2O2F4(H2O)2·H2O: a new V4+ layer structure related to VOF3

V^IV oxyfluorides are of interest as frustrated magnets. The successful synthesis of two‐dimensionally connected vanadium(IV) oxyfluoride structures generally requires the use of ionic liquids as solvents. During solvothermal synthesis experiments aimed at producing two‐ and three‐dimensional vanadium(IV) selenites with triangular lattices, the title compound, diaquatetra‐μ‐fluorido‐dioxidodivanadium(IV) monohydrate, V₂O₂F₄(H₂O)₂·H₂O, was discovered and features a new infinite V⁴⁺‐containing two‐dimensional layer comprised of fluorine‐bridged corner‐ and edge‐sharing VOF₄(H₂O) octahedral building units. The synthesis was carried out under solvothermal conditions. The V⁴⁺ centre exhibits a typical off‐centring, with a short V=O bond and an elongated trans‐V—F bond. Hydrogen‐bonded water molecules occur between the layers. The structure is related to previously reported vanadium oxyfluoride structures, in particular, the same layer topology is seen in VOF₃.     

Simple Electrodeposition of Dendritic Pd Without Supporting Electrolyte and Its Electrocatalytic Activity Toward Oxygen Reduction and H2O2 Sensing

Metallic palladium (Pd) electrocatalysts for oxygen reduction and hydrogen peroxide (H₂O₂) oxidation/reduction are prepared via electroplating on a gold metal substrate from dilute (5 to 50 mM) aqueous K₂PdCl₄ solution. The best Pd catalyst layer possessing dendritic nanostructures is formed on the Au substrate surface from 50 mM Pd precursor solution (denoted as Pd‐50) without any additional salt, acid or Pd templating chemical species. The Pd‐50 consisted of nanostructured dendrites of polycrystalline Pd metal and micropores within the dendrites which provide high catalyst surface area and further facilitate reactant mass transport to the catalyst surface. The electrocatalytic activity of Pd‐50 proved to be better than that of a commercial Pt (Pt/C) in terms of lower overpotential for the onset and half‐wave potentials and a greater number of electrons (n) transferred. Furthermore, amperometric i–t curves of Pd‐50 for H₂O₂ electrochemical reaction show high sensitivities (822.2 and ?851.9 µA mM^?1 cm^?2) and low detection limits (1.1 and 7.91 µM) based on H₂O₂ oxidation H₂O₂ reduction, respectively, along with a fast response (<1 s).     

Co0.50VOPO4·2H2O

The crystal structure of cobalt vanadophosphate dihydrate {systematic name: poly[diaqua‐μ‐oxido‐μ‐phosphato‐hemicobalt(II)vanadium(II)]}, Co_0.50VOPO₄·2H₂O, shows a three‐dimensional framework assembled from VO₅ square pyramids, PO₄ tetrahedra and Co[O₂(H₂O)₄] octahedra. The Co^II ions have local 4/m symmetry, with the equatorial water molecules in the mirror plane, while the V and apical O atom of the vanadyl group are located on the fourfold rotation axis and the P atoms reside on sites. The PO₄ tetrahedra connect the VO₅ polyhedra to form a planar P–V–O layer. The [Co(H₂O)₄]²⁺ cations link adjacent P–V–O layers via vanadyl O atoms to generate an unprecedented three‐dimensional open framework. Powder diffraction measurements reveal that the framework collapses on removal of the water molecules.     

Über die Schichtstruktur von Cu2(H2O)4[C4H4N2][C6H2(COO)4]·2H2O

The Layered Structure of Cu₂(H₂O)₄[C₄H₄N₂][C₆H₂(COO)₄]·2H₂O Triclinic single crystals of Cu₂(H₂O)₄[C₄H₄N₂][C₆H₂(COO)₄]·2H₂O have been grown in an aqueous silica gel. Space group (Nr. 2), a = 723.94(7) pm, b = 813.38(14) pm, c = 931.0(2) pm, α = 74.24(2)°, β = 79.24(2)°, γ = 65.451(10)°, V = 0.47819(14) nm³, Z = 1. Cu²⁺ is coordinated in a distorted, octahedral manner by two water molecules, three oxygen atoms of the pyromellitate anions and one nitrogen atom of pyrazine (Cu—O 194.1(2)–229.3(3) pm; Cu–N 202.0(2) pm). The connection of Cu²⁺ and [C₆H₂(COO)₄)]^4? yields infinite strands, which are linked by pyrazine molecules to form a two‐dimensional coordination polymer. Thermogravimetric analysis in air showed that the dehydrated compound was stable between 175 and 248 °C. Further heating yielded CuO.     

Synthesis,characterization and in vitro cytotoxicity screening of some triarylbismuth(V) di(N‐salicylidene)amino carboxylates and the crystal structure of (2‐HOC6H4CHNCH2CO2)2Bi(C6H5)3

Four novel triarylbismuth(V) di(N‐salicylidene)amino carboxylates were synthesized. Their structures were confirmed by IR, ¹H NMR, ¹³C NMR and elemental analysis. The crystal structure of (2‐HOC₆H₄CH?NCH₂CO₂)₂BiPh₃ was determined by X‐ray diffraction. The in vitro cytotoxicity of all compounds against three human cancer cells (HL‐60, BGC‐823 and MDA‐MB‐435) at 10 µM are reported. Copyright © 2005 John Wiley & Sons, Ltd.     

Studies on the nuclease activity and interactions of the mixed‐polypyridyl [Ni2(1,3‐tpbd)(diimine)2(H2O)2]4+ complexes with thioredoxin reductase

Three new nickel(II) complexes formulated as [Ni₂(1,3‐tpbd)(diimine)₂(H₂O)₂]⁴⁺ [1,3‐tpbd = N,N,N′,N′‐tetrakis(2‐pyridylmethyl)benzene‐1,3‐diamine, where diimine is an N,N‐donor heterocyclic base like 1,10‐phenanthroline (phen),2,2′‐bipyridine (bpy), 4,5‐diazafluoren‐9‐one (dafo)], have been synthesized and structurally characterized by X‐ray crystallography: [Ni₂(1,3‐tpbd)(phen)₂(H₂O)₂]⁴⁺ (1), [Ni₂(1,3‐tpbd)(bpy)₂(H₂O)₂]⁴⁺(2) and [Ni₂(1,3‐tpbd)(dafo)₂(H₂O)₂]⁴⁺ (3). Single‐crystal diffraction reveals that the metal atoms in the complexes are all in a distorted octahedral geometry and in a trans arrangement around 1,3‐tpbd ligand. The interactions of the three complexes with calf thymus DNA (CT‐DNA) have been investigated by UV absorption, fluorescence spectroscopy, circular dichroism and viscosity. The apparent binding constant (K_app) values are calculated to be 1.91 × 10⁵ m ^?1 for 1, 1.18 × 10⁵ m ^?1 for 2, and 1.35 × 10⁵ m ^?1 for 3, following the order 1 > 3 > 2. The higher DNA binding affinity of 1 is due to the involvement in partial insertion of the phen ring between the DNA base pairs. A decrease in relative viscosities of DNA upon binding to 1–3 is consistent with the DNA binding affinities. These complexes efficiently display oxidative cleavage of supercoiled DNA in the presence of H₂O₂ (250 µ m ), with 3 exhibiting the highest nuclease activity. The rate constants for the conversion of supercoiled to nicked DNA are 5.28 × 10^?5 s^?1 (for 1), 6.67 × 10^?5 s^?1 (for 2) and 1.39 × 10^?4 s^?1 (for 3), also indicating that complex 3 shows higher catalytic activity than 1 and 2. Here the nuclease activity is not readily correlated to binding affinity. The inhibitory effect of complexes 1–3 on thioredoxin reductase has also been examined. The IC₅₀ values are calculated to be 26.54 ± 0.57, 31.03 ± 3.33 and 8.69 ± 2.54 µ m , respectively, showing a more marked inhibitory effect on thioredoxin reductase by complex 3 than the other two complexes. Copyright © 2012 John Wiley & Sons, Ltd.     

In Situ Preparation of a Ti3+ Self‐Doped TiO2 Film with Enhanced Activity as Photoanode by N2H4 Reduction

A new synthetic method to fabricate Ti³⁺‐modified, highly stable TiO₂ photoanodes for H₂O oxidation is reported. With Ti foil as both the conducting substrate and the Ti³⁺/Ti⁴⁺ source, one‐dimensional blue Ti³⁺/TiO₂ crystals were grown by a one‐step hydrothermal reaction. The concentration of Ti³⁺ was further tuned by N₂H₄ reduction, leading to a greater photoelectrocatalytic activity, as evidenced by a high photocurrent density of 0.64 mA cm^?2 at 1.0 V vs RHE under simulated AM 1.5 G illumination. Electron paramagnetic resonance and Mott–Schottky plots reveal that higher charge‐carrier density owing to N₂H₄ reduction contributes to the observed improvement. The generality of this synthesis method was demonstrated by its effectiveness in improving the performance of other types of photoanodes. By integrating the advantages of the 1D TiO₂ architecture with those of Ti³⁺ self‐doping, this work provides a versatile tool toward the fabrication of efficient TiO₂ photoanodes.     

M(H2O)2(4,4′‐bipy)[C6H4(COO)2]·2H2O (M = Mn2+, Co2+) – Zwei isotype Koordinationspolymere mit Schichtstruktur

M(H₂O)₂(4,4′‐bipy)[C₆H₄(COO)₂]·2H₂O (M = Mn²⁺, Co²⁺) – Two Isotypic Coordination Polymers with Layered Structure Monoclinic single crystals of Mn(H₂O)₂(4,4′‐bipy)[C₆H₄(COO)₂]·2H₂O ( 1 ) and Co(H₂O)₂(4,4′‐bipy)[C₆H₄(COO)₂]· 2H₂O ( 2 ) have been prepared in aqueous solution at 80 °C. Space group P2/n (no. 13), Z = 2; 1 : a = 769.20(10), b = 1158.80(10), c = 1075.00(10) pm, β = 92.67(2)°, V = 0.9572(2) nm³; 2 : a = 761.18(9), b = 1135.69(9), c = 1080.89(9) pm, β = 92.276(7)°, V = 0.9337(2) nm³. M²⁺ (M = Mn, Co), which is situated on a twofold crystallographic axis, is coordinated in a moderately distorted octahedral fashion by two water molecules, two oxygen atoms of the phthalate anions and two nitrogen atoms of 4,4′‐biypyridine ( 1 : M–O 219.5(2), 220.1(2) pm, M–N 225.3(2), 227.2(2) pm; 2 : Co–O 212.7(2), 213.7(2) pm, Co–N 213.5(3), 214.9(3) pm). M²⁺ and [C₆H₄(COO)₂)]^2? build up chains, which are linked by 4,4′‐biyridine molecules to yield a two‐dimensional coordination polymer with layers parallel to (001).Thermogravimetric analysis in air of 1 indicated a loss of water of crystallization between 154 and 212 °C and in 2 between 169 and 222 °C.     

Field Emission Properties of Multi-walled Carbon Nanotubes Grown on Silicon Nanoporous Pillar Array

"Multi-walled carbon nanotubes (CNTs) were grown on a silicon nanoporous pillar array (Si-NPA) by thermal chemical vapor deposition. Surface morphologies and microstructure of the resultant were studied by a field emission scanning electron microscope, Raman spectrum, transmission electron microscope, and highresolution transmission electron microscopy. The composition of samples was determined by energy dispersive X-ray spectroscopy (EDS). The results showed that a great deal of CNTs, with diameter in the range of 20-70 nm, incorporated with Si-NPA and a large scale nest array of CNTs/Si-NPA (NACNT/Si-NPA) was formed. EDS analysis showed that the composition of carbon nanotubes was carbon. Field emission measurements showed that a current density of 5 mA/cm2 was obtained at an electric field of 4.26 V/1m, with a turn-on field of 1.3 V/1m. The enhancement factor calculated according to the Fowler-Nordheim theory was ?11,000. This excellent field emission performance is attributed to the unique structure and morphology of NACNT/Si-NPA, especially the formation of a nest-shaped carbon nanotube array. A schematic drawing that illustrates the experimental configuration is given. These results indicate that NACNT/Si-NPA might be an ideal candidate cathode for potential applications in flat panel displays."     

Quantum chemical study of dissociation of H2 on C3H3V organometallic compound

We have studied H₂ adsorption on C₃H₃V organometallic compound using density functional method at B3LYP/LanL2Dz level of theory. It was found that H₂ molecule dissociates and adsorbed in dihydride form on this organometallic compound. Potential energy surface for H₂ dissociation process was obtained and different properties such as HOMO–LUMO gap, dipole moment, interaction energies between different molecules and atoms, vibrational frequencies, and atomic charges during the dissociation process were studied. It was found that the C₃H₃V(H₂) structure is most stable at H? V? H angle of 66.3°. Many‐body analysis was also carried out to determine the two‐body energies, three‐body energies, relaxation energy, and binding energy of the structures for each point on the potential surface. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Komplexe mit substituierten 2,5-Dihydroxy-p-benzochinonen: EAC6(C6H5)2O4 · 4 H2O (EA = Sr2+, Ba2+)

Complexes with Substituted 2,5-Dihydroxy-p-benzochinones: EAC₆(C₆H₅)₂O₄ · 4 H₂O (EA = Sr²⁺, Ba²⁺) Single crystals of the isotypic compounds EAC₆(C₆H₅)₂O₄ · 4 H₂O were grown in aqueous silicagel. EA²⁺ has CN 8. It is surrounded by four water molecules and four oxygen atoms of the bis-chelating polyporate dianions. Thereby folded chains are formed which are interlinked by hydrogen bonds. Thus building up corrugated layers with the phenyl substituents almost perpendicular to the layer plane. The layer stacking provides that they can engage into another.     

Syntheses and crystal structures of [Na(H2O)](C17H13O6SO3)* 2H2O and [NKH2O)6]C17H13O6SO3)2*H2O

Two hydrates of sodium 5,7‐dihydroxy‐6,4′‐dimethoxyisoflavone‐3′‐sulfonate ([Na(H₂O)J(C₁₇H₁₃O₆SO₃)*2H₂O,] 1) and nickel 5,7‐dihydroxy‐6,4′‐dimethoxyisoflavone‐3′‐sulfonate ([Ni(H₂O)₆](C₁₇H₁₃O₆SO₃)₂*4H₂O, 2) were synthesized and characterized by IR, 'H NMR and X‐ray diffraction analyses. The hydrate 1 crystallizes in the mono‐clinic system, space group P2(1) with a=0.8201(9) nm, b=0.8030(8) nm, c= 1.5361(16) nm, β=102.052(12)°, V =0.9893(18) nm³, D,= 1.579 g/cm³, Z=2, μ=0.252 nm^?1, F(000)=488, R=0.0353, wR=0.0873. The hydrate 2 belongs to triclinic system, space group P‐1 with a=0.7411(3) nm, b=0.8333(3) nm, c=1.7448(7) nm, α= 86.361(6)°, β=86.389(5)°, γ= 88.999(3)°, V=1.0731(7) nm³, D,=1.587 g/cm³, Z=1, μ=0.649 m^?1, F(000)= 534. In the structure of 1, the sodium cation is coordinated by six oxygen atom and two adjacent ones are bridged by three oxygen atoms to form an octahedron chain. The C? H…?… hydrogen bonds exist between two isoflavone molecules in the structure of 2. Meanwhile, hydrogen bonds in two compounds, link themselves to assemble two three‐dimensional network structures, respectively.     

Alkaline–Acid Zn–H2O Fuel Cell for the Simultaneous Generation of Hydrogen and Electricity

An alkaline–acid Zn–H₂O fuel cell is proposed for the simultaneous generation of electricity with an open circuit voltage of about 1.25 V and production of H₂ with almost 100 % Faradic efficiency. We demonstrate that, as a result of harvesting energy from both electrochemical neutralization and electrochemical Zn oxidation, the as‐developed hybrid cell can deliver a power density of up to 80 mW cm^?2 and an energy density of 934 Wh kg^?1 and maintain long‐term stability for H₂ production with an output voltage of 1.16 V at a current density of 10 mA cm^?2.