Dielectric relaxation study in electron‐irradiated ferroelectric poly(vinylidene fluoride‐trifluoroethylene) (80/20 mol%) copolymer

The relaxor ferroelectric (RFE) behavior in high‐energy electron‐irradiated poly(vinylidene fluoride‐trifluoroethylene) [P(VDF‐TrFE)] 80/20 mol % copolymer system is characterized over a broad frequency and temperature range. The dielectric properties remarkably vary with the irradiated dose in terms of the change from normal ferroelectric (FE) to RFE phase. During the RFE–paraelectric (PE) transition, the dielectric constants, as a function of temperature, can be described by the Vogel–Fulcher (V–F) relation. It has been found that the relationship between the real and imaginary part of dielectric constant in irradiated copolymer can be well fitted with modified Cole–Cole equation and Debye relaxation equation, exhibiting similar features as inorganic RFEs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2972–2980, 2005     

Thermally stimulated depolarization current in electron‐irradiated poly(vinylidene fluoride‐trifluoroethylene) (56/44 mol %) copolymers

The effect of electron irradiation on poly(vinylidene fluoride‐trifluoroethylene) (56/44 mol %) copolymers was studied with dielectric constant measurements, differential scanning calorimetry (DSC), X‐ray diffraction, thermally stimulated depolarization current (TSDC) spectroscopy, and polarization hysteresis loops. The dielectric relaxation peaks, obeying the Vogel–Fulcher law, indicated that the copolymers were transformed from a normal ferroelectric to a relaxor ferroelectric. The X‐ray and DSC results showed that both the crystalline and polar ordering decreased after irradiation, indicating a partial recovery from trans–gauche bonds to local trans bonds (polar ordering). Moreover, the peak temperature decreased with the irradiation dose in the TSDC spectra; this demonstrated fewer dipoles and crystalline regions in the irradiated copolymer films during the ferroelectric–paraelectric transition and was consistent with polarization hysteresis loop measurements. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1099–1105, 2004     

Modification of the structure and properties of poly(vinylidene fluoride–trifluoroethylene) 56/44 mol % copolymer by a proton‐irradiation treatment

The effects of high‐energy proton irradiation on the structure and properties of 56/44 mol % poly(vinylidene fluoride–trifluoroethylene) copolymer were studied with differential scanning calorimetry (DSC), X‐ray diffraction (XRD), relative permittivity, and polarization hysteresis measurements. Copolymer films prepared by hot compression molding were irradiated with a broad range of proton dosages (10–107 Mrad) at room temperature. The DSC results showed that the ferroelectric transition was strongly affected by the proton dosages. The XRD data indicated the reduction of polar ordering in the copolymer by the proton‐irradiation treatment. From the relative permittivity and polarization behavior, the copolymer film was found to be converted from a normal ferroelectric material to a relaxor ferroelectric material as the proton dosage was increased to 50 Mrad. The electrostrictive coefficient of the 56/44 mol % copolymer was enhanced after irradiation, and the optimized proton dosage for attaining the highest electrostrictive strain response was determined. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2334–2339, 2005     

Influence of the annealing conditions on the polarization and electromechanical response of high‐energy‐electron‐irradiated poly(vinylidene fluoride trifluoroethylene) copolymer

In this study, we investigated the influence of annealing conditions before irradiation on the ferroelectric and electromechanical properties of uniaxially stretched high‐energy‐electron‐irradiated poly(vinylidene fluoride trifluoroethylene) (HEEIP) copolymer (68/32 mol %) films. For films annealed at one fixed temperature before the irradiation (one‐step annealing), the highest crystallinity, which was highly desirable for enhancing the electromechanical response, was obtained only for films annealed between 132 and 136 °C. In addition, annealing over 10 h in this temperature window resulted in a large increase in the crystal lamellar thickness, which was required for reducing the polarization hysteresis to a minimum in the HEEIP samples. For improvements in the mechanical qualities of the uniaxially stretched films, a two‐step annealing procedure was investigated; that is, before the irradiation, the films were first annealed at a lower temperature to release the mechanical stress in the films due to the stretching and then were annealed in the high‐temperature window to raise the crystallinity and crystalline size. The experimental results indicated that this approach could produce uniaxially stretched HEEIP films with much improved mechanical qualities. Furthermore, the uniaxially stretched HEEIP films with this two‐step annealing exhibited the same electromechanical response as or an even higher one than that from the one‐step‐annealed HEEIP films. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 797–806, 2003     

DFT study of ferroelectric properties of the copolymers: Poly(vinylideneflouride‐trifluoroethylene) and poly(vinylidene fluoride‐chlorotrifluoroethylene)

A theoretical study of poly(vinylidene flouride‐trifluoroethylene) and poly(vinylidene fluoride‐chlorotrifluoroethylene, is presented. By density functional theory calculations, some of the properties of these materials have been obtained. Among such properties, the dipolar moment and the energies associated to the structural changes. The B3LYP functional and 6311+G(d,p) bases set were used with Gaussian program. Calculations associated to different conformations were carried out to get insight about the involved phase changes. The energetic, charges, and dipole moment were calculated. The conformations, namely, I = T_p, II = TG_a, and III = TG_p, where T means trans and G means gauche, for the two polymers aforementioned were compared with the poly(vinilydene fluoride) studies previously obtained. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem 110:2411–2417, 2010     

Origin of Piezoelectricity in an Electrospun Poly(vinylidene fluoride‐trifluoroethylene) Nanofiber Web‐Based Nanogenerator and Nano‐Pressure Sensor

A single stage electrospinning process can give rise to preferentially oriented induced dipoles in poly(vinylidene fluoride‐trifluoroethylene) [P(VDF‐TrFE)] nanofibers. The piezoelectricity of as‐electrospun P(VDF‐TrFE) nanofiber webs opens up new possibilities for their use as a flexible nanogenerators and nano‐pressure sensors. In this work, the origin of the piezoelectricity has been spotlighted by randomization of the induced dipoles at the Curie temperature and analyzed by polarized FT‐IR spectroscopic techniques as well as by detecting the piezoelectric signal from a nano‐pressure sensor.

     

Advanced solid‐state nuclear magnetic resonance for polymer science

Today, solid‐state nuclear magnetic resonance (NMR) is one of the most powerful and versatile tools for elucidating the structures and dynamics of molecular, macromolecular, and supramolecular systems. It provides information on molecular and collective phenomena over large length scales and timescales and is particularly suited to handle noncrystalline materials. This report describes how developments in solid‐state NMR were triggered by the possibilities that became available about 30 years ago by neutron scattering and synchrotron radiation. Close analogies between NMR spectroscopy and scattering are pointed out to emphasize that the two approaches nicely complement each other. Specific examples applying the new NMR techniques to amorphous polymers and supramolecular systems are described. The findings are related to the mechanical properties of polymers as well as specific functions such as photoconductivity and proton conductivity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5031–5044, 2004     

Development of oriented structure and properties on drawing of poly(vinylidene fluoride) by solid‐state coextrusion

Gel films of poly(vinylidene fluoride) (PVDF) consisting of α‐form crystals were drawn uniaxially by solid‐state coextrusion to extrusion draw ratios (EDR) up to 9 at an optimum extrusion temperature of 160 °C, about 10°C below the melting temperature (T_m). The development of an oriented structure and mechanical and electrical properties on coextrusion drawing were studied as a function of EDR. Wide‐angle X‐ray diffraction patterns showed that the α crystals in the original gel films were progressively transformed into oriented β‐form crystals with increasing EDR. At the highest EDR of 9 achieved, the drawn product consisted of a highly oriented fibrous morphology with only β crystals even for the draw near the T_m. The dynamic Young's modulus along the draw direction also increased with EDR up to 10.5 GPa at the maximum EDR of 9. The electrical properties of ferroelectricity and piezoelectricity were also markedly enhanced on solid‐state coextrusion. The D–E square hysteresis loop became significantly sharper with EDR, and a remanent polarization P_r of 100 mC/m² and electromechanical coupling factor along the thickness direction k_t of 0.27 were achieved at the maximum EDR of 9. The crystallinity value of 73–80% for the EDR 9 film, estimated from these electrical properties, compares well with that calculated by the ratio of the crystallite size along the chain axis to the meridional small‐angle X‐ray scattering (SAXS) long period, showing the average thickness of the lamellae within the drawn β film. These results, as well as the appearance of a strong SAXS maximum, suggest that the oriented structure and properties of the β‐PVDF are better explained in terms of a crystal/amorphous series arrangement along the draw axis. Further, the mechanical and electrical properties obtained in this work are the highest among those ever reported for a β‐PVDF, and the latter approaches those observed for the vinylidene fluoride and trifluoroethylene copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1371–1380, 2001     

High‐resolution solid‐state NMR study of the domain structure and molecular motion in drawn films of a vinylidene fluoride and trifluoroethylene copolymer with 73 mol % vinylidene fluoride

The heterogeneous higher order structure and molecular motion in a single crystalline film of a vinylidene fluoride (VDF) and trifluoroethylene (TrFE) copolymer with 73 mol % VDF was investigated with the ¹H–¹³C cross‐polarization/magic‐angle spinning NMR technique. A transient oscillation was observed in plots of the ¹³C peak intensity versus the contact time for the CH₂, CHF, and CF₂ groups. On the basis of the extended cross‐relaxation theory of spin diffusion, we determined that the oscillation behavior was caused by the TrFE‐rich segments in the chain and that the crystal consisted of VDF‐rich and TrFE‐rich domains. The former had TrFE‐rich segments in VDF and TrFE fractions of 0.24 and 0.27, respectively, and the latter had VDF‐rich segments in a VDF fraction of 0.49. The spin–lattice relaxation time T_1ρH in the rotating frame for each group was minimal in the three temperature regions of β, α_b, and α_c (↑) on heating and in the two temperature regions of α_1D and α_c (↓) on cooling. The α_c (↑) and α_c (↓) processes depended on the first‐order ferroelectric phase‐transition regions on heating and cooling, respectively. The motional modes for the other processes were confirmed by the T_1ρH minimum behavior of the VDF and TrFE groups in the TrFE‐rich domain and the VDF‐rich segments in the VDF‐rich domain. The β and α_b processes were attributed to the flip–flop motion of the TrFE‐rich segments and the competitive motion of the TrFE‐ and VDF‐rich segments in the ferroelectric phase, respectively. The α_1D process was due to the one‐dimensional diffusion motion of the conformational defects along the chain in the paraelectric phase, accompanied by the trans and gauche transformation of the VDF conformers of ttg⁺tg^? and g⁺tg^?tt. The effect of the competitive motion of the TrFE‐rich segment on the thermal stability of the VDF‐rich segment in the chain near the Curie temperature was examined. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1026–1037, 2002     

Solid‐state 1H → 19F/19F → 1H CP/MAS NMR study of poly(vinylidene fluoride)

Solid‐state ¹H → ¹⁹F and ¹⁹F → ¹H cross‐polarization magic angle spinning (CP/MAS) NMR spectra have been investigated for a semicrystalline fluoropolymer, namely poly(vinylidene fluoride) (PVDF). The ¹H → ¹⁹F CP/MAS spectra can be fitted by five Lorentzian functions, and the amorphous peaks were selectively observed by the DIVAM CP pulse sequences. Solid‐state spin‐lock experiments showed significant differences in T_1ρ^F and T_1ρ^H between the crystalline and amorphous domains, and the effective time constants, T_HF* and T_1ρ*, which were estimated from the ¹H → ¹⁹F CP curves, also clarify the difference in the strengths of dipolar interactions. Heteronuclear dipolar oscillation behaviour is observed in both standard CP and ¹H → ¹⁹F inversion recovery CP (IRCP) experiments. The inverse ¹⁹F → ¹H CP‐MAS and ¹H → ¹⁹F CP‐drain MAS experiments gave complementary information to the standard ¹H → ¹⁹F CP/MAS spectra in a manner reported in our previous papers for other fluoropolymers. The value of N_F/N_H (where N is a spin density) estimated from the CP‐drain curve is within experimental error equal to unity, which is consistent with the chemical structure. Copyright © 2001 John Wiley & Sons, Ltd.     

Synthesis of poly(vinylidene fluoride)‐b‐poly(styrene sulfonate) block copolymers by controlled radical polymerizations

Block copolymers based on poly(vinylidene fluoride), PVDF, and a series of poly(aromatic sulfonate) sequences were synthesized from controlled radical polymerizations (CRPs). According to the aromatic monomers, appropriate techniques of CRP were chosen: either iodine transfer polymerization (ITP) or atom transfer radical polymerization (ATRP) from PVDF‐I macromolecular chain transfer agents (CTAs) or PVDF‐CCl₃ macroinitiator, respectively. These precursors were produced either by ITP of VDF with C₆F₁₃I or by radical telomerization of VDF with chloroform, respectively. Poly(vinylidene fluoride)‐b‐poly(sodium styrene sulfonate), PVDF‐b‐PSSS, block copolymers were produced from both techniques via a direct polymerization of sodium styrene sulfonate (SSS) monomer or an indirect way with the use of styrene sulfonate ethyl ester (SSE) as a protected monomer. Although the reaction led to block copolymers, the kinetics of ITP of SSS showed that PVDF‐I macromolecular CTAs were not totally efficient because a limitation of the CTA consumption (56%) was observed. This was probably explained by both the low activity of the CTA (that contained inefficient PVDF‐CF₂CH₂? I) and a fast propagation rate of the monomer. That behavior was also noted in the ITP of SSE. On the other hand, ATRP of SSS initiated by PVDF‐CCl₃ was more controlled up to 50% of conversion leading to PVDF‐b‐PSSS block copolymer with an average number molar mass of 6000 g·mol^?1. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Enhanced electrical properties of highly oriented poly(vinylidene fluoride) films prepared by solid‐state coextrusion

Oriented poly(vinylidene fluoride) (PVDF) films with β‐form crystals have been commonly prepared by cold drawing of a melt‐quenched film consisting of α‐form crystals. In this study, we have successfully produced highly oriented PVDF thin films (20 µm thick) with β‐crystals and a high crystallinity (55–76%), by solid‐state coextrusion of a gel film to eight times the original length at an established optimum extrusion temperature of 160°C, some 10°C below the melting temperature. The resultant drawn films had a highly oriented (orientation function f_c = 0.993) fibrous structure, showing high mechanical properties of an extensional elastic modulus of 8.3 GPa and tensile strength of 0.84 GPa, along the draw direction. Such highly oriented and crystalline films exhibited excellent ferroelectric and piezoelectric properties. The square hysteresis loop was significantly sharper than that of a conventional sample. The sharp switching transient yielded the remnant polarization P_r of 90 mC/m², and the electromechanical coupling factor k_t was 0.24 at room temperature. These values are about 1.5 times greater than those of a conventional β‐PVDF film. Thus, solid‐state coextrusion near the melting point was found to be a useful technique for the preparation of highly oriented and highly crystalline β‐PVDF films with superior mechanical and electrical properties. The morphology of the extrudate relevant to such properties is discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2549–2556, 1999     

Polymer electrolyte membranes by in situ polymerization of poly(ethylene carbonate‐co‐ethylene oxide) macromonomers in blends with poly(vinylidene fluoride‐co‐hexafluoropropylene)

Salt‐containing membranes based on polymethacrylates having poly(ethylene carbonate‐co‐ethylene oxide) side chains, as well as their blends with poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP), have been studied. Self‐supportive ion conductive membranes were prepared by casting films of methacrylate functional poly(ethylene carbonate‐co‐ethylene oxide) macromonomers containing lithium bis(trifluorosulfonyl)imide (LiTFSI) salt, followed by irradiation with UV‐light to polymerize the methacrylate units in situ. Homogenous electrolyte membranes based on the polymerized macromonomers showed a conductivity of 6.3 × 10^?6 S cm^?1 at 20 °C. The preparation of polymer blends, by the addition of PVDF‐HFP to the electrolytes, was found to greatly improve the mechanical properties. However, the addition led to an increase of the glass transition temperature (T_g) of the ion conductive phase by ～5 °C. The conductivity of the blend membranes was thus lower in relation to the corresponding homogeneous polymer electrolytes, and 2.5 × 10^?6 S cm^?1 was recorded for a membrane containing 10 wt % PVDF‐HFP at 20 °C. Increasing the salt concentration in the blend membranes was found to increase the T_g of the ion conductive component and decrease the propensity for the crystallization of the PVDF‐HFP component. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 79–90, 2007     

Effect of Ionic Liquid Anion Type in the Performance of Solid Polymer Electrolytes Based on Poly(Vinylidene fluoride‐trifluoroethylene)

The effect of different anions within the ionic liquid in the characteristics of solid polymer electrolytes (SPEs) based on P(VDF‐TrFE) has been investigated. 1‐ethyl‐3‐methylimidazolium acetate, [C₂mim][OAc], 1‐ethyl‐3‐methylimidazolium triflate, [C₂mim][(CF₃SO₃)], 1‐ethyl‐3‐methylimidazolium lactate, [C₂mim][Lactate], 1‐ethyl‐3‐methylimidazolium thiocyanate, [C₂mim][SNC] and 1‐ethyl‐3‐methylimidazolium hydrogen sulfate [C₂mim][HSO₄] have been used in SPE prepared by solvent casting. The polymer phase, thermal and electrochemical properties of the SPE have been determined. The thermal and electrical properties of the SPEs strongly depend on the selected IL, as determined by their different interactions with the polymer matrix. The room temperature ionic conductivity increases in the following way for the different anions: [SNC]>[CF₃SO₃)]>[HSO₄]>[Lactate]>[OAc], which is mainly dependent on the viscosity of the ionic liquid.     

Cu(0)/2,6‐bis(imino)pyridines catalyzed single‐electron transfer‐living radical polymerization of methyl methacrylate initiated with poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)

A series of 2,6‐bis(imino)pyridines, as common ligands for late transition metal catalyst in ethylene coordination polymerization, were successfully employed in single‐electron transfer‐living radical polymerization (SET‐LRP) of methyl methacrylate (MMA) by using poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) (P(VDF‐co‐CTFE)) as macroinitiator with low concentration of copper catalyst under relative mild‐reaction conditions. Well‐controlled polymerization features were observed under varied reaction conditions including reaction temperature, catalyst concentration, as well as monomer amount in feed. The typical side reactions including the chain‐transfer reaction and dehydrochlorination reaction happened on P(VDF‐co‐CTFE) in atom‐transfer radical polymerization process were avoided in current system. The relationship between the catalytic activity and the chemical structure of 2,6‐bis(imino)pyridine ligands was investigated by comparing both the electrochemical properties of Cu(II)/2,6‐bis(imino)pyridine and the kinetic results of SET‐LRP of MMA catalyzed with different ligands. The substitute groups onto N‐binding sites with proper steric bulk and electron donating are desirable for both high‐propagation reaction rate and C? Cl bonds activation capability on P(VDF‐co‐CTFE). The catalytic activity of Cu(0)/2,6‐bis(imino)pyridines is comparable with Cu(0)/2,2′‐bipyridine under the consistent reaction conditions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4378–4388     

Greatly Enhanced Energy Density and Patterned Films Induced by Photo Cross‐Linking of Poly(vinylidene fluoride‐chlorotrifluoroethylene)

Greatly enhanced energy density in poly(vinylidene fluoride‐chlorotrifluoroethylene) [P(VDF‐CTFE)] is realized through interface effects induced by a photo cross‐linking method. Being different from nanocomposites with lowered dielectric strength, the cross‐linked P(VDF‐CTFE)s possess a high breakdown field as well as remarkably elevated polarization, both of which contribute to the enhanced energy density as high as 22.5 J · cm⁻³. Moreover, patterned thin films with various shapes and sizes are fabricated by photolithography, which sheds new light on the integration of PVDF‐based electroactive polymers into organic microelectronic devices such as flexible pyroelectric/piezoelectric sensor arrays or non‐volatile ferroelectric memory devices.

     

The grafting of acrylamide onto poly(ε‐caprolactone) and poly(1,5‐dioxepan‐2‐one) using electron beam preirradiation. II. An in vitro degradation study on grafted poly(ε‐caprolactone)

Acrylamide was graft polymerized onto the surface of a biodegradable semicrystalline polyester, poly(ε‐caprolactone). Electron beam irradiation at a dose of 5 Mrad was used to generate initiating species in the polyester. The degradation in vitro at pH 7.4 and 37°C in a phosphate buffer solution was studied for untreated, irradiated and acrylamide‐grafted polymers. In the case of poly(ε‐caprolactone), all materials showed similar behavior in terms of weight loss. No significant decrease in weight was observed up to 40 weeks, after which the loss of weight accelerated. The main differences in degradation behavior were found for the average molecular weights, M̄_n and M̄_w. Virgin poly(ε‐caprolactone) maintained M̄_n and M̄_w up to about 40 weeks, whereas the irradiated and grafted poly(ε‐caprolactone) showed similar continuous declines in M̄_n and M̄_w throughout the degradation period. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1651–1657, 1999     

Synthesis of end‐functionalized AB copolymers. II. Synthesis and characterization of carboxyl‐terminated poly(ethylene glycol)–poly(amino acid) block copolymers

AB block copolymers composed of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(amino acid) with a carboxyl group at the end of PEG were synthesized with α‐carboxylic sodium‐ω‐amino‐PEG as a macroinitiator for the ring‐opening polymerization of N‐carboxy anhydride. Characterizations by ¹H NMR, IR, and gel permeation chromatography were carried out to confirm that the diblock copolymers were formed. In aqueous media this copolymer formed self‐associated polymer micelles that have a carboxyl group on the surface. The carboxyl groups located at the outer shell of the polymeric micelle were expected to combine with ligands to target specific cell populations. The diameter of the polymer micelles was in the range of 30–80 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3527–3536, 2004     

The effect of electron beam irradiation on dynamic shear rheological behavior of a poly (propylene‐co‐ethylene) heterophasic copolymer

In this study the effect of electron beam irradiation on rheological properties of a poly (propylene‐co‐ethylene) heterophasic copolymer is evaluated. Using dynamic viscoelastic measurement in the linear viscoelastic range of deformation, it is observed that the complex viscosity and dynamic modulus of polypropylenes were decreased by increasing the irradiation dose. Polypropylene heterophasic copolymers consist of ethylene propylene rubber phase dispersed in polypropylene homopolymer matrix. The high energy electron beams simultaneously affect both isotactic polypropylene (iPP) matrix and ethylene propylene dispersed phase. The molecular chains of polypropylene homopolymer phase breakdown to smaller species, those are prone to degradation and branching as well. Increase in the melt flow rate behavior and shifting the cross‐over point to higher frequencies and increase in melt strength are due to this phenomenon. At the same time, the ethylene propylene phase of the polypropylene copolymer cross‐links due to irradiation, and a significant effect on the rheological behavior of samples are observed. The mathematical modeling of complex viscosity behavior revealed the conformity of experimental data with modified Carreau equation. Copyright © 2010 John Wiley & Sons, Ltd.