Preparation and properties of novel benzoxazine and polybenzoxazine with maleimide groups

A benzoxazine compound with a maleimide group, 3‐phenyl‐3,4‐dihydro‐2H‐6‐(N‐maleimido)‐1,3‐benzoxazine (HPM‐Ba), was prepared from N‐(4‐hydroxyphenyl)maleimide, formaldehyde, and aniline. The chemical structure of HBM‐Ba was identified by FT‐IR, ¹H‐NMR, and elemental analysis. HPM‐Ba showed a melting point of 52–55 °C and good solubility in common organic solvents. HPM‐Ba showed a two‐stage process of thermal polymerization. The first stage arose from the polymerization of maleimide groups, and the second one was the ring‐opening reaction of benzoxazine groups. Fusible polymaleimides with a Tg of around 100 °C could be obtained by thermally polymerizing HPM‐Ba at 130 °C. Further polymerizing the polymaleimides at 240 °C resulted in a completely cured resin showing a Tg at 204 °C. Good thermal stability and self‐extinguishing behavior was observed with the cured polybenzoxazine resins. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5954–5963, 2004     

Synthesis, curing kinetics and thermal properties of bisphenol-AP-based benzoxazine

A novel bisphenol-AP-aniline-based benzoxazine monomer (B-AP-a) was synthesized from the reaction of 4,4′-(1-phenylethylidene) bisphenol (bisphenol-AP) with formaldehyde and aniline. The chemical structures were identified by FT-IR, ¹H and ¹³C NMR analyses. The polymerization behavior of the monomer and the types of hydrogen bonding species were monitored by differential scanning calorimetry (DSC) and FT-IR. The curing kinetics was studied by isothermal DSC and the isothermal kinetic parameters were determined. The thermal properties of cured benzoxazine were measured by DSC and thermogravimetric analysis (TGA). The bisphenol-AP-aniline-based polybenzoxazine (poly(B-AP-a)) exhibited higher glass transition temperature (T_g) and better thermal stability than corresponding bisphenol A-aniline-based polybenzoxazines (poly(BA-a)). The T_g value of poly(B-AP-a) is 171 °C. The temperatures corresponding to 5% and 10% weight loss is 317 and 347 °C, respectively, and the char yield is 42.2% at 800 °C. The isothermal curing behavior of B-AP-a displayed autocatalysis and diffusion control characteristics. The modified autocatalytic model showed good agreement with experimental results.     

Synthesis and thermal properties of the thermosetting resin based on cyano functionalized benzoxazine

A novel thermosetting resin based on cyano functionalized benzoxazine (BZCN) has been synthesized from 2,6-bis(4-diaminobenzoxy)benzonitrile phenol and formaldehyde by solution reaction. The structure of the monomer is supported by FTIR, ¹H NMR and ¹³C NMR spectra, which have exhibited that the reactive benzoxazine rings and cyano group exist in the molecular structure of BZCN. The curing reactions of BZCN are monitored by the disappearance of the nitrile peak and the tri-substituted benzene ring that is attached with oxazine ring peak at 2231 and 930 cm⁻¹, respectively. The complete cured materials could achieve char yields up to 70% at 800 °C in nitrogen atmosphere, above 64% at 600 °C in air (20% oxygen) environments and the glass transition temperature up to 250 °C. The thermally activated curing polymerization reaction of BZCN follows multiple polymerization mechanisms via the ring-opening polymerization of oxazine rings and the triazine ring-formation of cyano groups, which contribute to the stability of the polymer.     

N-(11-羧基十一烷基)马来酰亚胺及其三聚体的合成

以顺丁烯二酸酐和12-氨基十二酸为原料,硫酸、三乙胺为脱水催化剂,经两步反应合成了N-(11-羧基十一烷基)马来酰亚胺.再在三苯基膦和苯酚作用下,N-(11-羧基十一烷基)马来酰亚胺进一步发生三聚反应合成了相应的马来酰亚胺三聚体.采用红外光谱和核磁共振谱对三聚体的结构进行了表征.     

Bio-based benzoxazine from renewable L-tyrosine: Synthesis,polymerization, and properties

Developing thermosets derived from renewable sources is of great importance. In this work, a fully bio-based benzoxazine monomer, 3,6-bis((3-(furan-2-ylmethyl)-3,4-dihydro-2H-benzo[e][1,3]oxazin-6-yl)methyl)piperazine-2,5-dione (TCDPF), is conveniently synthesized from L-tyrosine cyclic dipeptide (TCDP), furfurylamine and paraformaldehyde. The chemical structure of TCDPF is confirmed by nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy (FT-IR) techniques. The curing behavior of TCDPF is investigated by differential scanning calorimetry and in situ FT-IR techniques. After temperature-programmed curing, the thermomechanical property and thermal stability of the resulting TCDPF polymer (PTCDPF) are evaluated by dynamic mechanical analysis and thermogravimetric analysis techniques, respectively. It is found that PTCDPF have excellent comprehensive performance such as high glass transition temperature (T_g = 322 °C), high thermal degradation temperature (T_5% = 342 °C, T_10% = 395 °C in N₂ atmosphere), and high char yield (CY = 51.3% at 800 °C in N₂ atmosphere). The results demonstrate that L-tyrosine is a promising bio-based raw material for preparing high performance polybenzoxazines.     

Synthesis,characterization, and thermally activated curing of oligosiloxanes containing benzoxazine moieties in the main chain

Oligosiloxanes containing thermally curable benzoxazine units in the main chain have been synthesized. For this purpose, first the diallyl functional monomer is synthesized through the Mannich and ring closing reaction of 4,4′‐isopropylidenediphenol (bisphenol A), formaldehyde and allylamine. Hydrosilylation reaction of the resulting diallylic monomer (B‐ala) with 1,1,3,3‐tetramethyldisiloxane (TMDS) in the presence of Pt catalyst yields the corresponding poly(B‐ala‐tetramethyl disiloxane)s (PBTMDS) with the molecular weights in the range of 1800–4100 Da. The structures of the precursor diallyl monomer and the resulting polymers are confirmed by FT‐IR and ¹H NMR analysis. Curing behavior of both the monomer and polymers has also been studied by Differential Scanning Calorimetry (DSC). Flexible free standing transparent films of the oligosiloxanes are obtained by solvent casting from dichloromethane solution on Teflon plates. The films preserve shape and, to some extent, toughness after thermal curing between 100 and 180 °C. Thermal properties of the cured polymers are also investigated by thermogravimetric analysis (TGA). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 804–811, 2009     

Synthesis and curing of amino‐containing benzoxazine as a novel hardener for diglycidyl ether of bisphenol‐A

Benzoxazines containing various additional functional groups have been extensively reported to improve the properties of polybenzoxazines. In this work, a novel amino‐containing benzoxazine (PDETDA‐NH₂) was conveniently synthesized from diethyltoluenediamine (DETDA), 2‐hydroxybenzaldehyde, and paraformaldehyde and was used as a hardener for diglycidyl ether of bisphenol‐A (DGEBA). The curing behaviors of PDETDA‐NH₂ and PDETDA‐NH₂/DGEBA systems were studied by DSC, FT‐IR, and ¹H NMR. When curing, PDETDA‐NH₂ was firstly polymerized to N,O‐acetal‐type polymer and then rearranged to Mannich‐type polymer at elevated temperature, while the addition reaction between amino and benzoxazine was discouraged because of the steric hindrance of alkyl substituents. During PDETDA‐NH₂/DGEBA curing, it was found that the reactions happened in the order of addition polymerization of amino and epoxide, ring‐opening polymerization of benzoxazine, etherification between phenolic hydroxyl of the polymerized benzoxazine, and epoxide. Compared with DETDA cured DGEBA, PDETDA‐NH₂ cured DGEBA showed higher modulus, higher char yield, and much lower water uptake.     

Energetic analyses of chair and boat conformations of maleimide substituted cyclohexane derivatives

An analysis of the conformational preferences of two maleimide substituted cyclohexane derivatives proposed as scaffolds for HIV-1 fusion inhibitors is presented. Hybrid Low Mode-Monte Carlo (1:1) conformational searches using seven different force fields were performed in combination with the GBSA(water) solvent model. Low energy structures identified in this way were subjected to geometry optimization on the B3LYP/6-31G** surface. Solvent effects were included in the quantum calculation using the self-consistent reaction field model for water. Quantum results indicate that the 1,3,5-maleimide functionalized 1,3,5-methyl cyclohexane is more stable in the boat conformation, whereas 1,3,5-maleimide functionalized cyclohexane adopts the expected chair conformation with equatorial arms. None of the force fields studied was able to predict the unexpected preference for the boat conformation of 1,3,5-maleimide functionalized 1,3,5-methyl cyclohexane. Comparison of low energy and experimental structures was also performed.     

含双螺环三聚磷腈单元的苯并噁嗪树脂的结构和热稳定性

以双螺环取代三聚磷腈基双苯甲酰氯和4-氨基(N-苯基)苯并噁嗪单体为原料合成了一种含双螺环取代三聚磷腈结构单元的苯并噁嗪树脂单体(HCP-5);采用傅立叶变换红外光谱仪(FT-IR)和核磁共振谱仪(1 H NMR,13 C NMR,31P NMR)表征了苯并噁嗪树脂单体的结构,基于FT-IR和示差扫描量热法研究了其固化行为,并利用热重分析和示差热重分析研究了HCP-5树脂单体、均聚物及其与双酚A型苯并噁嗪树脂(Bz)共聚物的热稳定性.结果表明,HCP-5均聚物具有很好的热稳定性和成炭性,其在317℃下的热失重为5%,在800℃下的残炭率为50%,可用于普通苯并噁嗪树脂改性.此外,HCP-5/Bz(1∶1;质量分数)共聚物在332℃下的热失重为5%,在800℃下的残炭率为48%.     

Synthesis,polymerization, and thermal properties of benzoxazine based on bisphenol‐S and allylamine

A bifunctional benzoxazine monomer, 6,6′‐bis(3‐allyl‐3,4‐dihydro‐2H‐benzo[e][1,3]oxazinyl) sulfone (BS‐ala), was synthesized from bisphenol‐S, allylamine and formaldehyde via a solution method. The chemical structure of BS‐ala was confirmed by ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and elemental analysis. The polymerization behavior of BS‐ala was investigated by FTIR, solid‐state ¹³C NMR, and differential scanning calorimetry (DSC). The oxazine ring opening polymerization is prior to the addition polymerization of allyl group, and the exothermic peaks corresponding to the two reactions appear partially overlapped in the DSC curve. The storage modulus of the resultant polybenzoxazine at 25°C is about 3.9 GPa, and the glass transition temperature is 254°C. The 5% and 10% weight loss temperatures of the polybenzoxazine are about 335°C and 361°C in both air and nitrogen, respectively. The char yield is about 58% at 800°C in nitrogen, whereas almost no residue is remained at 700°C in air. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and fluorescent properties of model compounds for conjugated polymer containing maleimide units at the main chain

2,3‐Diaryl substituted maleimides as model compounds of conjugated maleimide polymers [poly(RMI‐alt‐Ar) and poly(RMI‐co‐Ar)] were synthesized from 2,3‐dibromo‐N‐substituted maleimide (DBrRMI) [R= cyclohexyl (DBrCHMI) and n‐hexyl (DBrHMI)] and aryl boronic acid using palladium catalysts. To clarify structures of conjugated polymer containing maleimide units at the main chain, ¹³C NMR spectra of 2‐aryl or 2,3‐diaryl substituted maleimides were compared with those of N‐substituted maleimide polymers. Copolymers obtained with DBrRMI via Suzuki‐Miyaura cross‐coupling polymerizations or Yamamoto coupling polymerizations were dehalogenated structures at the terminal end. This dehalogenation may contribute to the low polymerizability of DBrRMIs. On the other hand, the π‐conjugated compounds showed high solubility in common organic solvents. The N‐substituents of maleimide cannot significantly affect the photoluminescence spectra of 2,3‐diaryl substituted maleimides derivatives. The fluorescence spectra of poly(RMI‐alt‐Ar) and poly(RMI‐co‐Ar) varied with N‐substituents of the maleimide ring. When exposed to ultraviolet light of wavelength 352 nm, a series of 1,4‐phenylene‐ and/or 2,5‐thienylene‐based copolymers containing N‐substituted maleimide derivatives fluoresced in a yellow to blue color. It was found that photoluminescence emissions and electronic state of π‐conjugated maleimide derivatives were controlled by aryl‐ and N‐substituents, and maleimide sequences of copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A novel benzimidazole moiety‐containing benzoxazine: Synthesis,polymerization, and thermal properties

A novel benzoxazine‐containing benzimidazole moiety (P‐PABZ) was synthesized from 2‐(4‐aminophenyl)‐1H‐benzimidazole‐5‐amine and characterized. With the aid of differential scanning calorimetry and in situ Fourier transform infrared, we found the thermal polymerization of P‐PABZ in bulk started around 140 °C and its favored polymerization pathway. Compared to the benzoxazine derived from 4,4′‐diamine diphenyl methane (P‐MDA), P‐PABZ exhibited lower processing temperature, and the corresponding polymers had higher glass transition temperature and enhanced thermal stability. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Poly(urethane‐co‐benzoxazine)s via reaction of phenol terminated urethane prepolymers and benzoxazine monomer and investigation of their properties

In the present work, a new method was developed for the combination of polyurethanes (PUs) and polybenzoxazine (PBz) to obtain novel thermoset poly(urethane‐co‐benzoxazine)s with good thermal, mechanical, and electrical properties as well as low temperature curing profile. Knowing the catalytic effect of compounds possessing free phenolic groups on ring opening polymerization of benzoxazine monomers, preparation of phenol terminated urethane oligomers (PTPU) as the macroinitiator for a benzoxazine monomer (Ba) was considered. Firstly, NCO‐terminated urethane prepolymers were prepared from the reaction of poly(tetramethyleneether glycol), and 2,4‐tolylene diisocyanate, and then end functionalized with bisphenol‐A under proper condition. DSC, DMTA, and gel content measurements were applied to find optimum ring opening polymerization condition (170°C for 1 hr and 200°C for 15 min). Various kinds of thermoset polymers were prepared by the reaction of PTPU at different molecular weights with variable contents of Ba. All of monomeric and polymeric materials were characterized by conventional spectroscopic methods and their thermal, mechanical, viscoelastic, and electrical properties were measured and properties were correlated to their structure. Due to the interesting properties of these new materials, the possibility of using them as electrical insulators with higher service temperature in comparison to common PUs were examined and their potential applicability was confirmed. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of polymers bearing 1,3‐benzoxazine moiety in the side chains from poly(allylamine) and their crosslinking behaviors

A polymer bearing 1,3‐benzoxazine moiety in the side chain was synthesized successfully from poly(allylamine) based on a stepwise strategy consisted of three steps: (1) treatment of poly(allylamine) with salicylaldehyde to convert the amino group in the side chain into the corresponding o‐(iminomethyl)phenol moiety, (2) reduction of the o‐(iminomethyl)phenol to obtain the corresponding o‐(aminomethyl)phenol moiety, and (3) formation of 1,3‐benzoxazine moiety by the reaction of the o‐(aminomethyl)phenol with formaldehyde. The content ratio of benzoxazine moieties and o‐(aminomethyl)phenol moieties in the polymer were tunable by varying amount of formaldehyde. The presence of o‐(aminomethyl)phenol moieties exhibited a significant promoting effect on the crosslinking reaction. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of fluid 1,3‐benzoxazine monomers and their thermally activated curing

Novel mono‐ and difunctional aliphatic oxyalcohol‐based benzoxazines have been synthesized and characterized in detail. Molecular structures of the monomers were investigated by spectral analysis. The obtained benzoxazine monomers exhibit fluidic behavior, which makes them particularly useful for many applications compared to other traditional benzoxazines. Differential scanning calorimetry was used to monitor the thermal crosslinking behavior of synthesized monomers. Mono‐ and bifunctional benzoxazine monomers exhibited low curing exhothermic peak with the onset around 173 and 180 °C, respectively. Relatively, low ring‐opening polymerization temperature was due to the hydroxyl groups present in the structure of the monomers. The hydrogen bonding of hydroxyl groups may cause alignment of the monomers in the liquid state. Thermal stabilty of the polybenzoxazines was studied by thermogravimetric analysis. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Investigation of processing,thermal, and mechanical properties of a new composite matrix‐benzoxazine containing aldehyde group

A new benzoxazine aldehyde group containing monomer 3‐phenyl‐6‐formyl‐3, 4‐dihydro‐2H‐1, 3‐benzoxazine (Ald‐B) was synthesized via the Mannich reaction of formaldehyde, p‐hydroxybenzaldehyde, and aniline. The viscosities and curing behavior of the resins were studied. The results indicated that Ald‐B has an initial viscosity lower than 0.110 Pa s at 90°C and the maximum temperature of the exotherm was at 196°C. Dynamic mechanical analysis (DMA) of the copolymer of Ald‐B and methylenedianiline‐type bis‐benzoxazine (B‐BOZ) showed only one T_g of 251°C and high crosslink density in the matrix. The thermal stability of the copolymer was improved noticeably and the char yield at 800°C is 68.4%. The tensile strength and flexural strength of this resin cast are 72 and 137 MPa, respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

Studies on the thermal polymerization of substituted benzoxazine monomers: Electronic effects

To evaluate the influence of the electronic effects on the polymerization temperature, we looked at several 3‐phenyl‐3,4‐dihydro‐2‐H‐1,3‐benzoxazine monomers with electron‐withdrawing or electron‐donating groups in the 6 and 4′ positions. The monomers were synthesized and characterized using different synthetic methods to achieve the best possible results. The thermal polymerization of these benzoxazine monomers was analyzed by differential scanning calorimetry, and the polymerization behavior and the polymer characteristics were related to the electronic character of the substituent and the polymerization mechanism. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3353–3366, 2008     

Thermal and electrical behavior of hybrid thermosets based on epoxy and maleimide resins cured with p-aminobenzoic acid

Two thermoset systems based on maleimides and diglycidyl ether of bisphenol A (DGEBA) cured with p-aminobenzoic acid were characterized in terms of thermal and electrical behavior. Thermal characterization has been undertaken by means of thermogravimetric analysis in nitrogen atmosphere up to 600°C using simultaneous thermogravimetric/Fourier transform infrared/mass spectrometry (TG/FT-IR/MS) analysis. In the first stage of thermal degradation, the global kinetic parameters [activation energy (E_a) and preexponential factor (log A₁ (s⁻¹))] were calculated using the isoconversional method of Friedman. The energies variation as well as the shape of the differential thermal analysis curves suggests that the thermal decomposition process occurred in multiple stages. The evolved gases analysis was conducted by simultaneous TG/FT-IR/MS coupled techniques. Dielectric relaxation spectroscopy characterization was also made.     

Photovoltaic properties of the polymer solar cells comprising crosslinked maleimide polymers and fullerene‐derivative PCBM

A series of crosslinkable maleimide conjugated polymers with different vinyl group contents as side‐chain crosslinking sites have been synthesized by the Suzuki coupling reaction. Polymer solar cells (PSCs) were fabricated based on an interpenetrating network of the crosslinkable maleimide polymers as the electron donor, and a fullerene derivative, (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM), as the electron acceptor. The crosslinkable maleimide polymers underwent crosslinking reaction at the side‐chain vinyl groups upon the thermal treatment with or without the addition of initiator, azobisisobutyronitrile (AIBN). Better photovoltaic (PV) performances were obtained for the PSCs based on the polymer crosslinking without using initiator, whereas poorer PV performances were observed for the PSCs based on the polymer crosslinking with the AIBN initiator. In addition, higher operational stability was observed for the crosslinked polymer based solar cell as compared to the solar cell based on the un‐crosslinked polymer. The photo‐physical and PV properties of the cross‐linked maleimide polymers/PCBM based PSCs are discussed in detail as the morphology and crosslinking density of the polymers are taken into account. Copyright © 2010 John Wiley & Sons, Ltd.