Highly Sensitive Electrochemical Sensor for Nitric Oxide Using the Self‐Assembled Monolayer of 1,8,15,22‐Tetraaminophthalocyanatocobalt(II) on Glassy Carbon Electrode

Glassy carbon (GC) electrode modified with a self‐assembled monolayer (SAM) of 1,8,15,22‐tetraaminophthalocyanatocobalt(II) (4α‐Co^IITAPc) was used for the selective and highly sensitive determination of nitric oxide (NO). The SAM of 4α‐Co^IITAPc was formed on GC electrode by spontaneous adsorption from DMF containing 1 mM 4α‐Co^IITAPc. The SAM showed two pairs of well‐defined redox peaks corresponding to Co^III/Co^II and Co^IIIPc^?1/Co^IIIPc^?2 in 0.2 M phosphate buffer (PB) solution (pH 2.5). The SAM modified electrode showed excellent electrocatalytic activity towards the oxidation of nitric oxide (NO) by enhancing its oxidation current with 310 mV less positive potential shift when compared to bare GC electrode. In amperometric measurements, the current response for NO oxidation was linearly increased in the concentration range of 3×10^?9 to 30×10^?9 M with a detection limit of 1.4×10^?10 M (S/N=3). The proposed method showed a better recovery for NO in human blood serum samples.     

一种新型氧离子导体：La3GaMo2O12

A new oxide ion conductor,La_3GaMo_2O_(12),with a bulk conductivity of 2.7×10~(-2)S·cm~(-1) at 800 ℃ in air at-mosphere was prepared by the traditional solid-state reaction.The room temperature X-ray diffraction data could beindexed on a monoclinic cell with lattice parameters of a=0.5602(2) nm,b=0.3224(1) nm,c=1.5741(1) nm,β=102.555(0)°,V= 0.2775(2) nm~3 and space group Pc(7).Ac impedance measurements in various atmospheres furthersupport that it is an oxide ion conductor.This material was stable in various atmospheres with oxygen partial pres-sure p(O_2)ranging from 1.0×10~5 to 1.0×10~(-7) Pa at 800 ℃.A reversible polymorphic phase transition occurred atelevated temperatures as confirmed by the differential thermal analysis and dilatometric measurement.     

THE INTERACTION OF 2-AMINO-2-HYDROXYMETHYL-1,3-PROPANEDIOL WITH COBALT(II) AND MANGANESE(II) IONS

Abstract

The stepwise complex formation between 2-amino-2-hydroxymethyl-1,3-propanediol (TRIS) with Co(II) and Mn(II) was studied by potentiometry at constant ionic strength 2.0 M (NaClO₄) and T = (25.0 ± 0.1)°C, from pH measurements. Data of average ligand number (Bjerrum's function) were obtained from such measurements followed by integration to obtain Leden's function, F ₀(L). Graphical treatment and matrix solution of simultaneous equations have shown two overall stability constants of mononuclear stepwise complexes for the Mn(II)/TRIS system (β₁ = (5.04 ± 0.02) M^?1 and β₂ = (5.4 ± 0.5) M^?2) and three for the Co(II)/TRIS system (β₁ = (1.67 ± 0.02) × 10² M^?1, β₂ = (7.01 ± 0.05) × 10³ M^?2 and β₃ = (2.4 ± 0.4) × 10⁴ M^?3). Slow spontaneous oxidation of Co(II) solutions by dissolved oxygen, accelerated by S(IV), occurs in a buffer solution TRIS/HTRIS⁺ 0.010/0.030 M, with a synergistic effect of Mn(II).     

A Polypyrrole‐Imprinted Electrochemical Sensor Based on Nano‐SnO2/Multiwalled Carbon Nanotubes Film Modified Carbon Electrode for the Determination of Oleanolic Acid

A sensitive molecularly imprinted electrochemical sensor with specific recognition ability for oleanolic acid was synthesized by modification of multiwalled carbon nanotubes (MWNTs) decorated with tin oxide nanoparticles (nano‐SnO₂/MWNTs) and polypyrrole‐imprinted polymer on a carbon electrode. The morphology and electrochemical performance of the imprinted sensor were investigated by using scanning electron microscope (SEM), X‐ray diffraction (XRD), cyclic voltammetry (CV), linear sweep voltammetry (LSV) and amperometric i–t curve. The results showed that the imprinted sensor displayed excellent selectivity toward oleanolic acid. A linear relationship between the response currents and oleanolic acid concentrations ranging from 5.0×10^?8 g/L to 2.0×10^?5 g/L was obtained for the imprinted sensor. The limit of detection (LOD) of the imprinted sensor toward oleanolic acid was calculated as 8.6×10^?9 g/L at a signal to noise ratio (S/N) of 3. This imprinted sensor was successfully applied to the determination of oleanolic acid in Acitinidia deliciosa root samples.     

Electrocatalysis of Horseradish Peroxidase Immobilized on Cobalt Nanoparticles Modified ITO Electrode

Abstract

It is the first time that Horseradish peroxidase (HRP) was successively immobilized on the magnetic cobalt nanoparticles modified ITO (indium tin oxide) electrode. Morphologies of electrode surface were featured by the field emission‐scanning electron microscope (FSEM). Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize the modified process of electrode. Direct electrochemistry and electrocatalysis of HRP immobilized on nano‐Co/ITO were investigated. The biosensor exhibited high sensitivity, good stability, and excellent electrocatalytic activity to the reduction of H₂O₂. Under the optimized experimental conditions, a calibration curve over 2.0×10^?9～2.0×10^?8 mol l^?1 and 2.0×10^?7～2.0×10^?6 mol l^?1, with a limit of detection of 1.9×10^?9 mol l^?1 was obtained. The apparent Michaelis‐Menten constant (K _M ^app ) for HRP/nano‐Co/ITO electrode was calculated to be 0.79 mmol l^?1, indicating a higher affinity of HRP attached on the modified electrode.     

Doubly Modified Electrodes for the Selective Determination of Dopamine in the Presence of Interfering Species

In this paper, we describe the double modification of the glassy carbon electrode surface with two polymer layers for the selective determination of dopamine. The first layer was the electropolymerized macrocyclic nickel complex acting as an electrocatalyst for the dopamine oxidation and the second layer the polyurethane benzyl L ‐glutamate (PUBLG) for screening interfering species. Hydrolyzed PUBLG (PU‐C) showed a better screening effect. Thus prepared GC/Ni(II) complex film/PU‐C electrodes exhibited improved selectivity and better performance than unmodified counterparts, with minimum passivation even in the presence of large excess of interferents. Under optimal conditions, these electrodes showed a linear response over a dopamine concentration range of 2.5×10^?7 and 3.0×10^?5 M with a correlation coefficient of 0.999 and detection limit (at S/N=3) of 8.0×10^?8 M. The recoveries of dopamine in the 5‐fold diluted human urine sample were 96.9% for 4 measurements. The rate constant for the dopamine oxidation measured by the rotating disk electrode was found to be 1.1×10^?3 cm s^?1.     

Ionic conduction in LiSCN/dimethylformamide/poly(propylene oxide) system I. Dissociation equilibria of LiSCN

Dissociation equilibria of lithiumthiocyanate (LiSCN) in N,N-dimethylformamide (DMF) solutions of poly (propylene oxide) (PPO) were investigated by using infrared spectroscopy. The stretching bands due to the thiocyanate ions SCN^?1 and the LiSCN ion pair were found at 2058 and 2072 cm^?1, respectively. At high LiSCN concentration C of ca. 20 wt %, another weak band due to the dimer (LiSCN)₂ was observed. From the ratio of the areas of the absorption bands, the dissociation constant K₁ for the equilibrium LiSCN ? Li⁺ + SCN^?1 and that K₂ for (LiSCN)₂ ? 2LiSCN have been determined. With increasing DMF content, K₁ increases from 1 × 10^?4 for bulk PPO to 4.8 × 10^?1 for pure DMF at 299 K. Log K¹ is not linear against inverse of the dielectric constant ? of the medium and decreases with increasing temperature. The enthalpy (ΔH) and entropy (ΔS) changes for the dissociation of LiSCN are both negative. ©1995 John Wiley & Sons, Inc.     

Graphene Oxide as a Platform for Copper Pentacyanonitrosylferrate Nanoparticles and their Behavior in the Electro‐oxidation of N‐Acetylcysteine

This work describes the preparation of graphene oxide by the Modified Hummers Method and the chemical modification of its surface with nanoparticles of copper pentacyanonitrosylferrate(III) (GOCuNP). The materials obtained were characterized by Raman spectroscopy, x‐ray photoelectron spectroscopy and transmission electron microscopy. The GOCuNP was characterized by cyclic voltammetry using a graphite paste electrode that presented electrocatalytic response for N‐acetylcysteine with detection limit of 2.97×10^?5 mol L^?1 at concentration range of 3.00×10^?5 to 6.00×10^?3 mol L^?1 of N‐acetylcysteine. By this way, the bimetallic complex formed is included in the list of materials obtained as potential candidates for the construction of electrochemical sensors for N‐acetylcysteine detection.     

Kinetic model of reversible addition‐fragmentation chain transfer polymerization in microemulsions

A simplified kinetic model for RAFT microemulsion polymerization has been developed to facilitate the investigation of the effects of slow fragmentation of the intermediate macro‐RAFT radical, termination reactions, and diffusion rate of the chain transfer agent to the locus of polymerization on the control of the polymerization and the rate of monomer conversion. This simplified model captures the experimentally observed decrease in the rate of polymerization, and the shift of the rate maximum to conversions less than the 39% conversion predicted by the Morgan model for uncontrolled microemulsion polymerizations. The model shows that the short, but finite, lifetime of the intermediate macro‐RAFT radical (1.3 × 10^?4–1.3 × 10^?2 s) causes the observed rate retardation in RAFT microemulsion polymerizations of butyl acrylate with the chain transfer agent methyl‐2‐(O‐ethylxanthyl)propionate. The calculated magnitude of the fragmentation rate constant (k_f = 4.0 × 10¹–4.0 × 10³ s^?1) is greater than the literature values for bulk RAFT polymerizations that only consider slow fragmentation of the macro‐RAFT radical and not termination (k_f = 10^?2 s^?1). This is consistent with the finding that slow fragmentation promotes biradical termination in RAFT microemulsion polymerizations. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 604–613, 2010     

Evaluation of Thin Film Titanium Nitride Electrodes for Electroanalytical Applications

Titanium nitride is a hard and inert conducting material that has yet not been widely used as electrode material for electroanalytical applications although there are highly developed protocols available to produce well adherent micro and nanostructured electrodes. In this paper the possibilities of using titanium nitride thin films for electroanalytical applications is investigated. Scanning electrochemical microscope (SECM) was used for analysis of the redox kinetics of a selected fast redox couple at thin films of titanium nitride (TiN) in different thicknesses. The investigation was carried out by approaching an amperometric ultramicroelectrode (UME) to the TiN film while the soluble redox couple (ferrocenemethanol/ferrociniummethanol) served as mediator in a SECM configuration. The substrate was biased at a potential so that it rereduces the species being produced at the UME, thus controlling the feedback effect. Normalized current–distance curves were fitted to the theoretical model in order to find the apparent heterogeneous standard rate constant (k°) at the sample. The data are further supported by structural investigation of the TiN films using scanning force microscopy and X‐ray photoelectron spectroscopy. It was found that the kinetics are little influenced by prolonged storage in air. The heterogeneous standard rate constants in 2 mM ferrocenemethanol were (0.73±0.05)×10^?3 cm s^?1 for 20 nm TiN thin layer, (1.5±0.2)×10^?3 cm s^?1 for 100 nm TiN thin layer and (1.3±0.2)×10^?3 cm s^?1 for 300 nm TiN thin layer after prolonged storage in air. Oxidative surface treatment (in order to remove organic adsorbates) decreased the kinetics in agreement with a thicker oxide layer on the material. The results suggest that their direct use for amperometric detection of reversible redox systems in particular at miniaturized configurations may be advantageous.     

Adsorption of toluene-soluble polymers at the toluene–water interface

The adsorption of several toluene-soluble polymers at the toluene–water interface has been investigated by using the duNouy ring method of measuring interfacial tension γT /W . Polystyrene and poly(ethylene-co-vinyl acetate) (11.1 mole-% vinyl acetate) have little affinity for this interface at 29°C, but poly(methyl methacrylate) (PMMA) (M?_n = 420,000) and ethyl cellulose (EC) (M?_n = 50,100; 49.1% ethoxyl) adsorb significantly at concentrations as low as 1.0 × 10^?4 g/100ml. A plot of interfacial tension lowering versus initial logarithm of initial bulk phase polymer concentration is linear from 1.0 × 10^?4 to 1.0 × 10^?1 g/100 ml for EC and 1.0 × 10^?4 to 1.0 × 10^?2 g/100 ml for PMMA. When the PMMA concentration increases to 1.15 × 10^?1 g/100 ml, its adsorption behavior changes markedly. Prolonged time effects occur and adsorption becomes dependent upon dissolved water content of the toluene prior to formation of the toluene/water interface. Such effects are not observed with the other solutions studied. Increasing temperatures have variable effects on values of γT /W for the polymer solutions studied. Experiments with various polymer mixtures indicate that the polymer lowering T /W the most is preferentially adsorbed at the toluene–water interface and rapidly displaces less strongly adsorbed polymers.     

The 4‐(Dimethylamino) benzaldehyde‐4‐ethylthiosemicarbazone as Ionophore for Mercury(II) Solid State Selective Electrode

Hg(II) has formed a soluble complex with 4‐(dimethylamino) benzaldehyde‐4‐ethylthiosemicarbazone (DMABET) in methanol with a molar ratio of mercury(II):DMABET of 1 : 4. The formation constant (K_f) and Gibbs free energy (?G) of the complex showed that the formation of the complex was favorable. The DMABET was investigated as ionophore for Hg(II)‐ion selective electrode (ISE). At optimum pH 1–5 the proposed Hg(II)‐ISE showed an almost Nernstian slope at 27.8±1 mV, with linear regression coefficient, R²=0.995 and a detection limit of 5×10^?6 M. There was no serious interference from silver(I) with selectivity coefficient 5.69×10^?3. The electrode life span was more than 3 months. It has been applied for real water sample analysis and the results were in good agreement with the standard method.     

Molecular Imprinting-Chemiluminescence Sensor for the Determination of Amoxicillin

The amoxicillin-imprinted polymer was synthesized with methacrylic acid (MAA) as a functional monomer and ethylene glycol dimethacrylate (EGDMA) as a cross-linker. The binding characteristic of the imprinted polymer to amoxicillin was evaluated by equilibrium binding experiments. Using the imprinted polymer as recognition material, 3-(3′-nitrophenyl)-5(2′-sulfonylphenylazo)-rhodanine (4NRASP) was synthesized by the authors and was used as chemiluminescence (CL) reagent. A novel chemiluminescence (CL) sensor for the determination of amoxicillin was developed based on the CL reaction of amoxicillin with potassium permanganate in an acidic medium. The sensor displayed excellent selectivity and high sensitivity. The linear response range of the sensor was from 5.0 × 10^?9 to 1.0 × 10^?6 g · mL^?1 (r = 0.9985) and the detection limit was 1.3 × 10^?9 g · mL^?1. The relative standard deviation for the determination of 1.0 × 10^?7 g · mL^?1 amoxicillin solution was 1.7% (n = 11). The sensor was applied to the determination of amoxicillin in urine samples with satisfactory results.     

Flow‐Injection Chemiluminescence Analysis of Cloperastione Hydrochloride

Abstract

A new chemiluminescence (CL) reaction was observed when cloperastine hydrochloride was injected into the reaction mixture after the CL reaction of Ce(IV) and sodium sulfite finished. A new flow injection CL method for the determination of cloperastine hydrochloride was established based on the CL reaction. The relative standard deviation (RSD) for the determination of cloperastine hydrochloride was 1.3% (n=11, c=1.0×10^?6 g/mL). The CL intensity responded linearly to the concentration of cloperastine hydrochloride in the range 2.0×10^?7～2.0×10^?5 g/mL (r=0.9962). The detection limit was 5×10^?8 g/mL cloperastine hydrochloride. The method had been applied to the determination of cloperastine hydrochloride in tablets with satisfactory results.     

Transport of carbonate ions through supported liquid membrane by using Alamine 336 and trioctylphosphine oxide as carriers

Abstract

Transport studies were carried out for carbonate ions through supported liquid membrane (SLMs) by using Alamine 336 and trioctylphosphine oxide (TOPO) as carriers. Experimental variables were investigated, such as concentration of carbonate ion (10^?5 to 4×10^?2 M), carriers (10^?5 to 10^?1 M), and alkali (0.01–0.5); and stirring speed (50–150 rpm) of bulk solutions. The use of combined carriers Alamine 336 and TOPO shows a synergic transport of carbonate ions. The stability of the SLM system in relation to the transport of carbonate ions has been studied. The enrichment of carbonate ions (10^?6 to 4×10^?2 M) from the dilute solution was explored. The different combinations of amines with TOPO show synergic permeability of the carbonate ions through SLM system.     

Thermal Studies of New Lead(II) Coated‐Wire Membrane Electrodes

Five plastic membrane Pb²⁺‐selective electrodes were prepared based on 1,4‐bis(N‐tosyl‐o‐aminophenoxy)butane I , 1,4‐bis(N‐allyl‐N‐tosyl‐o‐aminophenoxy)butane II , 1,4‐bis(N‐benzyl‐N‐tosyl‐o‐aminophenoxy)butane III , 1,4‐bis[N‐(o‐allyloxybenzyl)‐N‐tosyl‐o‐aminophenoxy]butane IV , and 1,4‐bis(N‐octyl‐N‐tosyl‐o‐aminophenoxy)butane V as neutral carriers. The electrodes exhibited nearly Nernstian responses over the concentration ranges, 2.5×10^?4–4.0×10^?2, 2.5×10^?5–4.0×10^?2, 7.9×10^?5–4.0×10^?2, 2.2×10^?5–4.0×10^?2, and 1.9×10^?4–4.0×10^?2 M for electrodes composed with the ionophores I–V , respectively. All electrodes showed pH range of about 4.0 to 11.5 and working temperature range of 22 to 70 °C with isothermal temperature coefficients of 1.19×10^?3, 1.16×10^?3, 1.16×10^?3, 1.00×10^?3 , and 1.32×10^?3 V/°C for electrodes I–V respectively.     

Metathesis cyclopolymerization of substituted 1,6‐heptadiyne and dual conductivity of doped polyacetylene bearing branched triazole pendants

The branched triazole group is synthesized by click chemistry via a controlled approach of slow addition of AB₂ compound to a B₂ core, and used as the substituent for 1,6‐heptadiyne monomer. Metathesis cyclopolymerization of monomer is performed well in dichloromethane without the weakly coordinating additive, indicating that the branched triazole itself can stabilize the living propagating chain, to generate branched triazole pendant‐contained polyacetylene with trans‐double bonds and five‐membered ring repeating units along the conjugated backbone. The LiTFSI doped polyacetylenes display ionic conductivities of 2.5–1.8 × 10^?6 S cm^?1; by further doping with iodine, polyacetylenes show the improved ionic and electronic conductivities of 1.3 × 10^?5 and 2.1 × 10^?7 S cm^?1 at 30 °C, respectively. Therefore, these doped polyacetylenes may act as the new electrolyte materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 485–494     

Preparing of Iridium Oxide Film Modified Microelectrode as an Amperometric Detector in FIA for Determination of Epinephrine

Abstract

Iridium oxide film modified microelectrode with a tip diameter of 25 µm was constructed using anodically grown iridium oxide film. The iridium oxide film, which was formed at the tip of the iridium wire by cyclic voltammetry in dilute sulfuric acid, showed excellent catalytic activity towards the oxidation of epinephrine. The stability and electrochemical properties of iridium oxide film modified microelectrode along with catalytic oxidation of epinephrine was studied. An oxidation peak was observed at 0.28 V. The electron‐transfer number (n) was 2. The iridium oxide film modified microelectrode was used as a detector in flow injection system for determination of epinephrine. Under the optimized conditions, the calibration curve was linear in the concentration range of 1.0×10^?8 to 1.0×10^?5 mol/l for epinephrine, with a detection limit of 1.0×10^?9 mol/l. The iridium oxide film modified microelectrode was used for direct determination of the epinephrine in human serum samples. The flow injection analysis was precise detection method of epinephrine and time saving device.     

On the interaction of hydroperoxide and inhibitor molecules

Decomposition of 1-phenylethyl-hydroperoxide has been studied in the presence of 2,6-di-tert-butyl-4-methyl-phenol inhibitor in ethylbenzene and chlorobenzene both in oxygen and nitrogen. The oxygen consumption and the inhibitor concentrations were measured against the initial inhibitor concentrations. Two methods were applied for the determination of the rate coefficients of the reaction: Its value is about 3 × 10^?4L × mol^?1 × S^?1, at 120°C. However, large experimental errors we deal with, the existence of a reaction yielding radicals, presumably an interaction between hydroperoxide and inhibitor molecules, can be established emphasizing the importance of measurements carried out with various initial concentrations of the inhibitor.     

Development of an Amperometric Enzymatic Biosensor Based on Gold Modified Magnetic Nanoporous Microparticles

Gold modified nanoporous silica based magnetic microparticles have been prepared as support for the immobilization of the enzyme horseradish peroxidase (HRP). The enzyme modified gold microparticles were retained onto the surface of a solid carbon paste electrode with the help of a permanent magnet. The analytical performances of the resulting biosensor were characterized by studying hydroquinone (HQ) and hydrogen peroxide. The former was monitored by the direct electroreduction of the biocatalytically generated quinone. Several experimental parameters influencing the biosensor response were investigated. A linear response to HQ was obtained in the concentration range comprised between 5×10^?7 and 4.5×10^?6 M with a detection limit of 4×10^?7 M. The enzyme electrode provided a linear response to hydrogen peroxide over a concentration range comprised between 5×10^?7?1.3×10^?4 M with a detection limit of 4×10^?7 M. The inhibition of the biosensor response in the presence of thiols e.g. cysteine, captopril, glutathione and Nacystelyn (NAL) has been pointed out.