GaN and GaxIn1−xN Nanoparticles with Tunable Indium Content: Synthesis and Characterization

Semiconducting GaN and Ga_xIn_1?xN nanoparticles (4–10 nm in diameter, depending on the metal ratio) with tunable indium content are prepared through a chemical synthesis (the urea‐glass route). The bandgap of the ternary system depends on its composition, and therefore, the color of the final material can be turned from bright yellow (the color of pure GaN) to blue (the color of pure InN). Transmission electron microscopy (TEM and HRTEM) and scanning electron microscopy (SEM) images confirm the nanoparticle character and homogeneity of the as‐prepared samples. X‐ray diffraction (XRD), electron diffraction (EDX), elemental mapping, and UV/Vis, IR, and Raman spectroscopy investigations are used to confirm the incorporation of indium into the crystal structure of GaN. These nanoparticles, possessing adjusted optical properties, are expected to have potential applications in the fabrication of novel optoelectronic devices.     

Formation of PdNiZn thin film at oil‐water interface: XPS study and application as Suzuki‐Miyaura catalyst

Nanosheet of PdNiZn and nanosphere of PdNiZn/reduced‐graphene oxide (RGO) with sub‐3 nm spheres have been successfully synthesized through a facile oil‐water interfacial strategy. The morphology and composition of the films were determined by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive analysis of X‐ray (EDAX) and elemental mapping. In the present study, we have developed a method to minimize the usage of precious Pd element. Due to the special structure and intermetallic synergies, the PdNiZn and PdNiZn/RGO nanoalloys exhibited enhanced catalytic activity and durability relative to Pd nanoparticles in Suzuki‐Miyaura C‐C cross‐coupling reaction. Compared to classical cross‐coupling reactions, this method has the advantages of a green solvent, short reaction times, low catalyst loading, high yields and reusability of the catalysts.     

Rational Design of Ag/TiO2 Nanosystems by a Combined RF‐Sputtering/Sol‐Gel Approach

The present work is devoted to the preparation of Ag/TiO₂ nanosystems by an original synthetic strategy, based on the radio‐frequency (RF) sputtering of silver particles on titania‐based xerogels prepared by the sol–gel (SG) route. This approach takes advantage of the synergy between the microporous xerogel structure and the infiltration power characterizing RF‐sputtering, whose combination enables the obtainment of a tailored dispersion of Ag‐containing particles into the titania matrix. In addition, the system′s chemico‐physical features can be tuned further through proper ex situ thermal treatments in air at 400 and 600 °C. The synthesized composites are extensively characterized by the joint use of complementary techniques, that is, X‐ray photoelectron and X‐ray excited Auger electron spectroscopies (XPS, XE‐AES), secondary ion mass spectrometry (SIMS), glancing incidence X‐ray diffraction (GIXRD), field emission scanning electron microscopy (FE–SEM), transmission electron microscopy (TEM), electron diffraction (ED), high‐angle annular dark field scanning TEM (HAADF–STEM), energy‐filtered TEM (EF–TEM) and optical absorption spectroscopy. Finally, the photocatalytic performances of selected samples in the decomposition of the azo‐dye Plasmocorinth B are preliminarily investigated. The obtained results highlight the possibility of tailoring the system characteristics over a broad range, directly influencing their eventual functional properties.     

The Effect of Ligand Denticity in Size‐Selective Synthesis of Calix[n]arene‐Stabilized Gold Nanoparticles: A Multitechnique Approach

A series of gold nanoparticles (AuNPs) stabilized by monodentate, bidentate, and tridentate thiolate calix[n]arene ligands 1 – 3 was prepared by using the Brust–Schiffrin two‐phase direct synthesis and characterized with NMR spectroscopy, elemental analysis, transmission electron microscopy (TEM), and X‐ray photoelectron spectroscopy (XPS). The experimental data show that the particular multidentate structure of calix[n]arene derivatives 2 and 3 introduces a control element in the preparation of the gold nanoparticles that allows, in the particular experimental conditions here reported, to obtain very small (≈1 nm) AuNPs. These are the first experimental findings that identify a role of ligand “denticity” in the determination of the nuclearity of nanoparticles.     

Effects of Halogen Bonding in Chemical Activity of Lead(II) Electron Pair: Sonochemical Synthesis,Structural Studies,and Thermal Analysis of Novel Lead(II) Nano Coordination Polymer

The nanoflower lead(II) coordination compound {[Pb(phen)(μ‐CH₃COO)][PF₆]}_n ( 1 ) (phen = 1,10‐phenanthroline) was synthesized by a sonochemical method. The nanostructure was characterized by using scanning electron microscopy (SEM), X‐ray powder diffraction, elemental analysis, and thermal analysis. The single‐crystal X‐ray structure shows that the overall structure of 1 is a 1D coordination polymer. Complex 1 has a bridging acetate pathway. Three halogen bonds observed in the structure and the strong halogen bonding of F–Pb causes chemical activity of the lead electron pair. This is further extended into a 3D supramolecular structure by weak π–π intermolecular interactions. The coordination number of the lead(II) ions is six, resulting in PbN₂O₄. PbO nanoparticles were obtained by the thermolysis of 1 at 180 °C with oleic acid as a surfactant. The morphology and size of the prepared PbO nanoparticles were further observed using scanning electron (SEM) and transmission electron microscopy (TEM), and were analyzed by X‐ray photoelectron spectroscopy (XPS).     

New bis(N‐heterocyclic carbene) palladium complex immobilized on magnetic nanoparticles: as a magnetic reusable catalyst in Suzuki‐Miyaura cross coupling reaction

A new bis(N ‐heterocyclic carbene) (NHC) palladium complex supported on silica coated magnetic nanoparticles (MNPs) was prepared using the reaction of synthesized Pd‐NHC complex with MNPs. The Pd‐NHC complex was prepared using the reaction of a hydroxyl‐functionalized bis‐imidazolium ionic liquid. The Pd‐NHC organometallic complex was used as a heterogeneous recyclable and active catalyst in the Suzuki‐Miyaura reaction and various aryl halides were coupled with arylboronic acids in order to synthesize diverse biaryls in good to excellent yields. The prepared catalyst was characterized by use of some different microscopic and spectroscopic techniques including elemental analysis, FT‐IR spectroscopy, diffuse reflectance UV–Vis spectrophotometery, scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM) and X‐ray diffraction (XRD). The Pd‐NHC catalyst system is a magnetic reusable catalyst and it can be separated from the reaction mixture using an external magnetic field. The catalyst was reusable in the Suzuki‐Miyaura coupling reaction at least for 6 times without significant decreasing in its catalytic activity.     

Allyloxyporphyrin‐Functionalized Multiwalled Carbon Nanotubes: Synthesis by Radical Polymerization and Enhanced Optical‐Limiting Properties

Allyloxyporphyrin‐functionalized multiwalled carbon nanotubes (MWCNT‐TPP) were synthesized by radical polymerization and characterized by FTIR, UV/Vis absorption, and X‐ray photoelectron spectroscopy; elemental analysis; TEM; and thermogravimetric analysis. Z‐scan studies revealed that this nanohybrid exhibits enhanced nonlinear optical (NLO) properties compared to a control sample consisting of a covalently unattached physical blend of MWCNTs and porphyrin, as well as to the separate MWCNTs and porphyrin. At the wavelengths used, the mechanism of enhanced optical limiting likely involves reverse saturable absorption, nonlinear scattering, and photoinduced electron/energy transfer between the MWCNTs and the porphyrin. The role of electron/energy transfer in the NLO performance of MWCNT‐TPP was investigated by Raman and fluorescence spectroscopy.     

Phosphomolybdic acid supported on Schiff base functionalized graphene oxide nanosheets: Preparation,characterization, and first catalytic application in the multi‐component synthesis of tetrahydrobenzo[a]xanthene‐11‐ones

New Schiff base (SB) functionalized graphene oxide (GO) nanosheets containing phosphomolybdic counter‐anion H₂PMo₁₂O₄₀^¯ (H₂PMo) were successfully prepared by grafting of 3‐aminopropyltriethoxysilane (APTS) on GO nanosheets followed by condensation with benzil and finally reaction with phosphomolybdic acid (H₃PMo₁₂O₄₀, denoted as H₃PMo) and characterized using Fourier transform infrared (FT‐IR) spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), particle size distribution, energy‐dispersive X‐ray (EDX) analysis, EDX elemental mapping, and inductively coupled plasma optical emission spectrometry (ICP‐OES). The prepared new nanomaterial, denoted as GO‐SB‐H₂PMo, was shown to be an efficient heterogeneous catalyst in one‐pot, three‐component reaction of β‐naphthol, aldehydes, and dimedone, giving high yields of tetrahydrobenzo[a]xanthene‐11‐ones within short reaction times. The catalyst is readily recovered by simple filtration and can be recycled and reused several times with no significant loss of catalytic activity.     

Synthesis of Au/Al2O3 Nanocatalyst and its Application in the Reduction of p‐Nitrophenol

Gold (Au) nanoparticles supported on alumina (Al₂O₃) were prepared at several pH levels via the deposition‐precipitation (DP) method. The effects of pH at below and above the isoelectric point (IEP) of Al₂O₃ as well as the pH adjustment before and after the addition of the support into the gold chloride solution were investigated. The results revealed the formation of cationic, clusters and metallic Au on alumina. The catalytic activity of these species was tested in the reduction of p‐nitrophenol (p‐NP) using hydrazine as a reductant. The catalytic reaction was monitored spectrophotometerically and the highest rate constant (k‐) achieved based on pseudo first order kinetic model was 12.7 × 10^‐3 s^‐1. Structural and elemental characterizations of the supported gold nanoparticles were carried out using X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy‐dispersive X‐rays (EDX), atomic absorption spectrometry (AAS), and ultraviolet‐visible spectroscopy (UV‐Vis).     

Small Pd nanoparticles supported in large pores of mesocellular foam: an excellent catalyst for racemization of amines

Highly dispersed palladium nanoparticles (1–2 nm) supported in large‐pore mesocellular foam (MCF; 29 nm) were synthesized. The Pd‐nanocatalyst/MCF system was characterized by transmission electron microscopy (TEM), powder X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). The performance of the Pd nanocatalyst obtained was examined for amine racemization. The Pd nanocatalyst showed higher activity and selectivity toward racemization of (S)‐1‐phenylethyl amine than any other amine racemization catalyst reported so far and it could be reused several times. Our data from TEM and XRD suggest a restructuring of the Pd nanocatalyst from amorphous to crystalline and an increase in Pd nanocatalyst size during the racemization reaction. This led to an unexpected increase of activity after the first use. The Pd nanocatalyst obtained can be integrated with other resolving processes of racemic organic compounds to increase the yield of chiral organic products.     

X-ray mapping in electron-beam instruments.

This review traces the development of X-ray mapping from its beginning 50 years ago through current analysis procedures that can reveal otherwise obscure elemental distributions and associations. X-ray mapping or compositional imaging of elemental distributions is one of the major capabilities of electron beam microanalysis because it frees the operator from the necessity of making decisions about which image features contain elements of interest. Elements in unexpected locations, or in unexpected association with other elements, may be found easily without operator bias as to where to locate the electron probe for data collection. X-ray mapping in the SEM or EPMA may be applied to bulk specimens at a spatial resolution of about 1 microm. X-ray mapping of thin specimens in the TEM or STEM may be accomplished at a spatial resolution ranging from 2 to 100 nm, depending on specimen thickness and the microscope. Although mapping has traditionally been considered a qualitative technique, recent developments demonstrate the quantitative capabilities of X-ray mapping techniques. Moreover, the long-desired ability to collect and store an entire spectrum at every pixel is now a reality, and methods for mining these data are rapidly being developed.     

Synthesis and Characterization of Core‐Shell Selenium/Carbon Colloids and Hollow Carbon Capsules

A novel Se/C nanocomposite with core‐shell structures has been prepared through a facile one‐pot microwave‐induced hydrothermal process. The new material consists of a trigonal‐Se (t‐Se) core and an amorphous‐C (a‐C) shell. The Se/C composite can be converted to hollow carbon capsules by thermal treatment. These products were characterized by transmission electron microscopy (TEM), powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), selected area electron diffraction (SAED), energy‐dispersive X‐ray (EDX) spectroscopy, and X‐ray photoelectron spectroscopy (XPS).     

Self‐Assembled Hollow Polyaniline/Au Nanospheres Obtained by a One‐Step Synthesis

Self‐assembled hollow nanosphere composites of polyaniline and Au nanoparticles (PANI‐p‐TSA/Au) were chemically synthesized from solutions containing p‐toluenesulfonic acid (p‐TSA) with the addition of gold chloride trihydrate as the oxidant. The composite materials were characterized by SEM, TEM, and a range of spectroscopic methods. Spectroscopic characterizations confirmed that the polymeric product is a form of doped PANI, while electron diffraction and X‐ray diffraction showed that elemental Au was present in the PANI‐p‐TSA/Au nanocomposites. The room temperature electrical conductivity of the PANI‐p‐TSA/Au nanocomposites was two orders of magnitude greater than a PANI‐p‐TSA obtained in the presence of ammonium persulfate as the oxidant under the same conditions.

     

Ni3S2 Supported on Porous Ball‐milled Silicon,a Highly Selective Electrochemical Sensor for Glucose Determination

In this work, an electrochemical sensor based on Ni₃S₂ nanoparticles supported on porous ball‐milled silicon was fabricated for measuring glucose. At first, the glassy carbon electrode (GCE) surface was modified by Ni₃S₂ nanoparticles supported on a porous ball‐milled silicon substrate. To characterize the modified electrode, N₂ adsorption‐desorption isotherms and BHJ, transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDX), elemental mapping and X‐ray diffraction (XRD) were used. In the following, the effective parameters on the sensor response such as pH, NaOH concentration, catalyst concentration, applied potential, and rotational speed of the electrode were optimized using cyclic voltammetric (CV) and hydrodynamic amperometric methods. Under the optimal conditions, the calibration curve was plotted using the hydrodynamic amperometric method. Three linear regions were obtained from 0.5–134, 134–1246, and 1246–3546 μM, with a detection limit of 0.2 μM for glucose. Finally, the proposed method was used for measuring glucose levels in human blood serums.     

Water‐Soluble Gold Nanoparticles: From Catalytic Selective Nitroarene Reduction in Water to Refractive Index Sensing

Water‐soluble gold nanoparticles (Au NPs) stabilized by a nitrogen‐rich poly(ethylene glycol) (PEG)‐tagged substrate have been prepared by reduction of HAuCl₄ with NaBH₄ in water at room temperature. The morphology and size of the nanoparticles can be controlled by simply varying the gold/stabilizer ratio. The nanoparticles have been fully characterized by TEM, high‐resolution (HR) TEM, electron diffraction (ED), energy‐dispersive X‐ray spectroscopy (EDS), UV/Vis, powder XRD, and elemental analysis. The material is efficient as a recyclable catalyst for the selective reduction of nitroarenes with NaBH₄ to yield the corresponding anilines in water at room temperature. Furthermore, the potential ability of the Au NPs as a refractive index sensor owing to their localized surface plasmon resonance (LSPR) effect has also been assessed.     

Synthesis and Characterization of PE-g-MA／MgAI-LDH Exfoliation Nanocomposite via Solution Intercalation

An organo‐modified MgAl‐layered double hydroxide (OMgAl‐LDH) was successfully exfoliated in the xylene solution of polyethylene‐grafted‐maleic anhydride (PE‐g‐MA) under re‐fluxing condition. A PE‐g‐MA/MgAl‐LDH exfoliation nanocomposite was formed after the precipitation of PE‐g‐MA from the dispersion system. The structure and thermal property of the PE‐g‐MA/MgAl‐LDH exfoliation nanocomposite were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and thermogravimetry analysis (TGA). The disappearance of d₀₀₁ XRD peak of OMgAl‐LDH at 20 = 3.2° suggests that the MgAl hydroxide sheets are exfoliated in the nanocomposite. The TEM image shows that the MgAl hydroxide sheets of less than 70 nm in length or width are exfoliated and dispersed disorderly in PE‐g‐MA matrix. TGA profiles indicate that the PE‐g‐MA/MgAl‐LDH nanocomposite with 5 wt% OMgAl‐LDH loading shows a faster charring process in temperature range from 210 to 390 °C and a greater thermal stability beyond 390 °C than PE‐g‐MA does. The decomposition temperature of the nanocomposite is 25 °C higher than that of PE‐g‐MA as measured at 50% weight loss. The PE‐g‐MA/MgAl‐LDH nanocomposite is promising for application of flame‐retardant polymeric materials.     

Mesoporous silica supported ytterbium as catalyst for synthesis of 1,2‐disubstituted benzimidazoles and 2‐substituted benzimidazoles

The benzimidazole ring is an important pharmacophore in contemporary drug discovery. Thus, effort to identifying new compounds containing benzimidazole scaffolds have gained much attention in recent years. In the present study, MCM‐41 type mesoporous silica with large pore (l‐MSN) supported ytterbium was successfully prepared by wet impregnation method. Among rare earth metal salts, ytterbium triflate has already been widely investigated as a catalyst in organic synthesis but less toxic ytterbium oxide has yet to be explored. Relatively high abundance and low cost of ytterbium with respect to many catalytically active metals (e.g. Pd, Au, Ru, Ir, Pt) offer an opportunity to develop sustainable catalysts for organic conversions. The catalyst has been characterized by various techniques including nitrogen adsorption, FT‐IR, TEM, SEM, EDX technique and elemental mapping. The obtained materials exhibit high surface area and a narrow distribution of mesoporosity. The catalytic performance of the Yb@l–MSNs was tested by synthesis of 1,2‐disubstituted benzimidazoles and 2‐substituted benzimidazoles through the coupling of aldehydes with o‐phenylenediamine. The catalyst resulted in excellent yields in short reaction times and the reaction showed tolerance toward both electron‐donating and electron‐withdrawing functional groups at room temperature. A particularly interesting finding was the solvent selectivity of this reaction; namely, 1,2‐disubstituted benzimidazoles generated as major product in water‐ethanol, while the 2‐substituted benzimidazoles was generated exclusively in non‐polar solvents like toluene.     

Metallogels Derived from Silver Coordination Polymers of C3‐Symmetric Tris(pyridylamide) Tripodal Ligands: Synthesis of Ag Nanoparticles and Catalysis

By applying a recently developed crystal engineering rationale, four C₃ symmetric tris(pyridylamide) ligands namely 1,3,5‐tris(nicotinamidomethyl)‐2,4,6‐triethylbenzene, 1,3,5‐tris(isonicotinamidomethyl)‐2,4,6‐triethylbenzene, 1,3,5‐tris(nicotinamidomethyl)‐2,4,6‐trimethylbenzene, and 1,3,5‐tris(isonicotinamidomethyl)‐2,4,6‐trimethylbenzene, which contain potential hydrogen‐bonding sites, were designed and synthesized for generating Ag^I coordination polymers and coordination‐polymer‐based gels. The coordination polymers thus obtained were characterized by single‐crystal X‐ray diffraction. The silver metallogels were characterized by transmission electron microscopy (TEM) and dynamic rheology. Upon exposure to visible light, these silver metallogels produced silver nanoparticles (AgNPs), which were characterized by TEM, powder X‐ray diffraction, energy dispersive X‐ray and X‐ray photoelectron spectroscopy. These NPs were found to be effectively catalyzed the reduction of 4‐nitrophenolate to 4‐aminophenolate without the use of any exogenous reducing agent.     

Synthesis and ceramic conversion of a new oligomeric precursor to boron nitride

A new polyaminoborazine with good solubility was synthesized by ammonolysis reaction of a mixture of B‐chloroborazine, B‐bischloroborazine, and B‐trichloroborazine under mild condition. The oligomer was easily cured at 250°C. The pyrolytic residue of the cured oligomer was investigated with X‐ray photoelectron spectroscopy (XPS), powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and thermal gravimetric analysis (TGA). The results indicated that crystalline h‐BN with B/N ratio of 1:1.01 is main in the residue pyrolyzed at 1500°C. Copyright © 2010 John Wiley & Sons, Ltd.     

Chain Architecture Dependent 3‐Dimensional Supramolecular Assembly of Rod‐Coil Molecules with a Conjugated Hexa‐p‐phenylene Rod

Summary: We have prepared hexa‐p‐phenylene based rod‐coil molecules with identical coil volume fractions, but different poly(propylene oxide) (PPO) coil architectures (linear versus dibranched), and investigated their self‐assembling behavior in the solid state by small angle X‐ray scattering (SAXS) and transmission electron microscopy (TEM) techniques. Rod‐coil molecules with a linear PPO coil showed a honeycomb‐like lamellar assembly of rod segments with hexagonally arrayed PPO coil perforations. In contrast, the rod‐coil molecules with dibranched PPO coils self‐organized into rod bundles with a body centered tetragonal symmetry surrounded by a PPO coil matrix. These results demonstrate that the steric hindrance at the rod/coil interface arising from coil architectural variation is a dominant parameter governing supramolecular rod assembly in the rod‐coil system.

TEM images and schematic illustrations of the self‐assembled structures of rod‐coil molecules with linear (left) and dibranched (right) PPO coils, respectively.