Study on the nonisothermal crystallization behavior of poly(vinyl alcohol)/attapulgite nanocomposites by DSC analysis

Attapulgite (AT)‐reinforced poly(vinyl alcohol) (PVA) nanocomposite films were prepared by solution‐casting technique. The nonisothermal crystallization behaviors of PVA bulk and PVA/AT nanocomposites have been investigated by differential scanning calorimetry (DSC). It has been found that the uniformly dispersed AT nanorods in the matrix have great influence on the glass transition temperature and crystallization behavior of PVA matrix. The Jeziorny method has been employed to analyze the DSC data. The results show that Jeziorny method could describe this system very well. Comparing with the PVA bulk, PVA/AT nanocomposites have higher crystallinity X_t, shorter semicrystallization time t_1/2, and higher crystallization rate constant Z_c. It can be concluded that AT can be used as an effective nucleating agent and has effects on the growth of crystallites in the crystallization process of PVA matrix. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 534–540, 2006     

碳纳米管改性聚苯硫醚熔纺纤维的结构与性能研究

将多壁碳纳米管(MWCNTs)和聚苯硫醚(PPS)经过熔融挤出后制备成复合材料切片,并采用熔融纺丝法制得碳纳米管改性聚苯硫醚复合纤维.采用扫描电镜(SEM)、拉曼光谱、示差扫描量热分析(DSC)、动态机械分析(DMA)以及力学性能测试等表征手段研究了复合纤维中碳管的分散状态,与基体的界面作用,复合纤维的结晶性能以及力学性能,从而探讨了聚苯硫醚/碳纳米管复合纤维体系的微观结构与宏观性能之间的关系.研究表明,聚苯硫醚分子结构与碳纳米管之间具有的π-π共轭作用使碳管较为均匀的分散在基体中,界面结合较为紧密.同时熔融纺丝过程中的拉伸作用使碳管进一步解缠并使碳管沿纤维拉伸方向取向.另一方面,拉曼光谱显示拉伸作用有效地增强了界面作用,有利于外界应力的传递.碳管的良好分散以及强的界面作用使复合纤维力学性能得到大幅度的提高,当碳管含量达到5 wt%时,复合纤维的模量有了明显的提高,拉伸强度较纯PPS纤维提高了近220%.     

改性海藻酸钠聚集行为对电纺纳米纤维形貌的影响

以过硫酸钾(KPS)为引发剂, 采用双丙酮丙烯酰胺(DAA)对海藻酸钠(SA)进行改性, 制备了海藻酸钠-聚双丙酮丙烯酰胺两亲性共聚物(SA-PDAA). 将SA-PDAA与聚乙烯醇(PVA)复配, 并进行静电纺丝, 制得SA-PDAA/PVA电纺纳米纤维. 通过红外光谱、 差示扫描量热和荧光光谱表征了SA-PDAA的结构和性能, 通过黏度仪、 表面张力仪和电导率仪测试了SA-PDAA纺丝液的物理性能, 用扫描电子显微镜表征了SA-PDAA/PVA电纺纳米纤维的形貌, 考察了SA-PDAA/PVA电纺纳米纤维的释药性能. 结果表明, DAA接枝到SA分子链上, SA-PDAA的临界聚集浓度为0.072 g/L, SA-PDAA具有良好的两亲性, SA-PDAA/PVA电纺纳米纤维具有均一的形貌. 改性后的SA可以有效地减缓药物释放速度, 提高SA-PDAA/PVA电纺纳米纤维的缓释性能.     

聚乙烯醇/纳米纤维素复合膜的渗透汽化性能及结构表征

将聚乙烯醇/纳米纤维素(PVA/NCC)复合膜应用于乙醇-水混合溶液的渗透汽化脱水过程,探讨了纳米纤维素对膜的溶胀性能、机械性能和渗透汽化性能的影响; 利用原子力显微镜(AFM)探测了纳米纤维素的形貌特征; 采用傅里叶变换红外光谱仪(FTIR)、扫描电镜(SEM)、差示扫描量热仪(DSC)和热重分析仪(TGA)对膜结构...     

Thermoplastic polyurethane/silica nanocomposite fibers by electrospinning

Thermoplastic polyurethane/silica nanocomposite fibers with good mechanical properties were prepared by electrospinning, using colloidal silica as the source of silica and dimethyl formamide as the solvent. The fiber morphology was examined by field emission scanning electron microscopy. The average fiber diameter is about 0.8 μm with 0–10 wt % silica, and silica nanoparticles were observed on all fiber surfaces. X‐ray photoelectron spectroscopy analysis of Si in combination with transmission electron microscopy observation suggest that silica nanoparticles have a fairly uniform distribution in the fibers rather than enriching on the fiber surfaces. Tensile tests show that the incorporation of silica nanoparticles can bring about a significant reinforcing effect without decreasing the ductility. The reinforcing effect is further confirmed by dynamic mechanical analysis. The thermoplastic polyurethane/silica composite fiber mats can adsorb gold nanoparticles after further treatment with 3‐aminopropyltriethoxysilane, demonstrating that the composite fibers could be used as functional fibers by using the properties of silica nanoparticles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Preparation and properties of calcium silicate hydrate-poly(vinyl alcohol) nanocomposite materials

Summary A series of calcium silicate hydrate (C-S-H)-polymer nanocomposite (C-S-HPN) materials were prepared by incorporating poly(vinyl alcohol) (PVA) into the inorganic layers of C-S-H during precipitation of quasicrystalline C-S-H from aqueous solution. The as synthesized C-S-HPN materials were characterized by Fourier-transform infrared photoacoustic (FTIRPAS) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy/energy dispersed spectroscopy (SEM/EDS), thermogravimetric analysis (TG), differential thermogravimetry (DTG) and differential scanning calorimetry (DSC). The XRD peaks of C-S-HPN materials suggest the intermediate organizations presenting both intercalation of PVA and exfoliation of C-S-H. The SEM micrographs of C-S-H, PVA and C-S-HPN materials with different PVA contents exhibit the significant differences in their morphologies. Effects of the material compositions on the thermal stability of a series of C-S-HPN materials along with PVA and C-S-H were studied by TG, DTG and DSC. Three significant decomposition temperature ranges were observed in the TG curves of all C-S-HPN materials.     

Structure and compatibility of poly(vinyl alcohol)-silk fibroin (PVA/SA) blend films

The structure and compatibility of poly(vinyl alcohol)-silk fibroin (PVA/SF) blend films were analyzed by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, x-ray diffractometry, and scanning (SEM) and transmission (TEM) electron microscopy. DSC curves of PVA/SF blend films showed a major endothermic peak at 220°C, along with a peak at 280°C. These endotherms were assigned to the thermal decomposition of the ordered PVA elements and to the thermal degradation of silk fibroin, respectively. The PVA/SF blends behaved in a manner intermediate to the pure components, as suggested by both contraction expansion and sample weight retention properties recorded by TMA and TGA measurements. The IR absorption spectra of the blends were identified as purely a composite of the absorption bands characteristic of both PVA and SF pure polymers. The X-ray diffraction patterns of PVA/SF blends showed overlapping spacing due to PVA and SF. A dispersed phase formed by spherical particles of 3–7 μm diameter was observed by SEM and TEM. All these findings suggest that PVA and SF are incompatible. © 1994 John Wiley & Sons, Inc.     

Isothermal crystallization kinetics and mechanical properties of poly(butylene terephthalate)/attapulgite nanocomposites

Poly(butylene terephthalate) (PBT)/attapulgite (AT) nanocomposites were prepared by in situ polymerization. Morphology of the PBT/AT nanocomposites was observed by scanning electron microscope and polarizing optical microscope. Thermogravimetric analyses were used to examine the thermal stability. The melting behaviors, equilibrium melting temperature, isothermal crystallization behavior of pure PBT and PBT/AT nanocomposites were studied by differential scanning calorimetry. The results show that PBT/AT nanocomposites possess higher thermal stability than pure PBT, and AT nanoparticles play a heterogeneous nucleating agent in PBT crystallization that accelerated the crystallization rate. The PBT/AT nanocomposite with higher AT content could retard the transport of polymer chains to the growing crystals compared with that of PBT/AT nanocomposite in lower AT content. According to dynamic mechanical analysis results, the storage modulus of PBT/AT nanocomposites was markedly improved and the addition of AT nanoparticles promotes the crystallization of PBT, which decreases the amorphous area. Meanwhile, the well-dispersed AT nanoparticles also retard the movement of polymer chain segment and increase the proportion of rigid amorphous region.     

Stabilization of electrospun poly(vinyl alcohol) nanofibrous mats in aqueous solutions

<正>The stability ofpoly(vinyl alcohol)(PVA) nanofibrous mats in water media was improved by post-electrospinning treatments.Bifunctional glutaraldehyde(GA) in methanol was used as a crosslinking agent to stabilize PVA nanofiber,but fiber twinning was observed frequently,and the highly porous structure of PVA nanofibrous mats was destroyed when the crosslinked fiber was soaked in water.To overcome this shortcoming,chitosan(CS) was introduced into the PVA spinning solution to prepare PVA/CS composite nanofibers.Their treatment in GA/methanol solution could retain the fiber morphology of PVA/CS nanofibers and porous structure of PVA/CS nanofibrous mats even if they were soaked in aqueous solutions for 1 month.Scanning electron microscopy(SEM),X-ray diffraction(XRD),thermal gravimetric analysis(TGA) and differential scanning calorimetry(DSC) were applied to characterize the physicochemical structure and thermal properties of PVA nanofibers.It was found that the water resistance of PVA nanofibrous mats was enhanced because of the improvement of the degree of crosslinking and crystallinity in the electrospun PVA fibers after soaking in GA/methanol solution.     

Poly(vinyl alcohol)/GO-MMT nanocomposites: Preparation,structure and properties

A facile, efficient and environment friendly method is established to prepare poly(vinyl alcohol)(PVA) based graphene oxide-montmorillonite(GO-MMT) nanocomposites in aqueous media. GO-MMT nanohybrid is obtained by the combination of GO and MMT in water without any reducing or stabilizing agents. The formation of GO-MMT nanohybrid is due to the hydrogen bonding and crosslinking effects. The sodium ions within MMT sheets act as crosslinkers between GO sheets and MMT platelets. The resultant nanocomposites are characterized by means of X-ray diffraction(XRD), scanning electron microscopy(SEM), differential scanning calorimetry(DSC), thermogravimetric analysis(TGA) and mechanical testing. Compared to that of pure PVA, PVA nanocomposites show enhanced thermal stabilities and mechanical properties, which results from strong interfacial adhesion of the nanoadditives in PVA matrix. The further increase in the tensile strength and modulus results from strong interaction between PVA chains and layered GO-MMT as well as good mechanical properties of GO-MMT hybrid, compared to PVA/GO and PVA/MMT nanocompsoites.     

Application of CuO nanoparticles modified with vitamin B1 for the production of poly(vinyl alcohol)/CuO nanocomposite films with enhanced optical,thermal and mechanical properties

In this Investigation, the CuO nanoparticles (NPs) were treated by vitamin B₁ as a biomolecule modifier. The CuO NPs were used as an appropriate filler for fabrication of poly(vinyl alcohol) (PVA) nanocomposites (NCs). Then, NCs with various ratios (3, 5, and 7wt%) of modified CuO were fabricated under ultrasonic irradiation and their properties were compared with pure PVA. Several techniques were used for characterization of NCs. Field emission scanning electron microscopy and transmission electron microscopy analysis indicated that NPs have proper compatibility with the PVA matrix. Thermal gravimetric analysis results confirmed that NCs displayed higher thermal stability than neat PVA. Also, the addition of the NPs into the PVA matrix improved the optical and mechanical behaviors. Finally, the contact angle measurements verified that the hydrophilicity decreased for different ratios of modified NPs loaded in the polymer matrix. Copyright © 2017 John Wiley & Sons, Ltd.     

Preparation and characterization of a nanoscale poly(vinyl alcohol) fiber aggregate produced by an electrospinning method

Nanoscale poly(vinyl alcohol) (PVA) fiber (100–500 nm) aggregates were prepared with an electrospinning technique. Additionally, a chemical crosslinking method was used to crosslink the nanoscale PVA fiber aggregates. Differential scanning calorimetry, wide‐angle X‐ray diffraction, and scanning electron microscopy techniques were employed to characterize the PVA fiber aggregates. The different crosslinking densities of the PVA fiber aggregates were obtained through the control of the weight percentage of glyoxal to PVA. The crosslinking densities due to heat treatment and chemical crosslinking were studied. The influence of heat treatment could be neglected in contrast to chemical crosslinking when the curing temperature was 120 °C. The primary factor that affected the crosslinking density was the volume of the chemical crosslinking agent. The results showed that the properly crosslinked PVA fiber aggregates had better antiwater solubility and mechanical properties than the noncrosslinked PVA fiber aggregates. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1261–1268, 2002     

Development of the morphology and crystalline state due to hybridization of reinforced toughened nylon containing a liquid‐crystalline polymer

A hybrid composite consisting of rubber‐toughened nylon‐6,6, short glass fibers, and a thermotropic liquid‐crystalline polymers (LCP) was investigated by the LCP content being varied. The thermal behavior, morphology, and crystallization behavior due to hybridization were studied by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and wide‐angle X‐ray scattering (WAXS). DSC results indicated that the crystallinity of the glass‐fiber‐reinforced toughened nylon‐6,6 was reduced by LCP addition, particularly 5–10 wt % LCP. DMA data showed that the miscibility between the blended components was maximum at the 5 wt % LCP composition, and the miscibility decreased with increasing LCP content. SEM photomicrographs revealed information consistent with the thermal behavior on miscibility. It was also observed that the 10 wt % LCP composition showed predominantly an amorphous character with FTIR and WAXS. WAXS results indicated that LCP hybridization increased the interplanar spacing of the hydrogen‐bonded sheets of the nylon crystals rather than the spacing between the hydrogen‐bonded chains. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 549–559, 2003     

磷钼酸/聚苯乙烯/聚乙烯醇电纺纤维膜的制备及性能

采用静电纺丝法制备了磷钼酸/聚苯乙烯(PS)/聚乙烯醇(PVA)复合纤维,并将其模压成膜.利用红外光谱(IR)、扫描电子显微镜(SEM)及X射线能谱(EDX)等对复合纤维及其膜的结构与形貌进行表征,并对复合纤维膜的光催化性能、力学性能及在水中稳定性进行测试.结果表明,在复合纤维中磷钼酸的Keggin结构得到保持.PS与PVA质量比为1∶1时,复合纤维形貌最佳,表面光滑,直径较小且分布均匀,复合纤维的直径随着磷钼酸含量的增加而减小.将磷钼酸固载于复合纤维膜上比直接使用具有更高的光催化活性,光照25 min后接近98%的甲基橙降解;复合纤维膜易于回收再利用,5次重复使用后,复合纤维膜没有破损,磷钼酸损失较少,光催化性能无明显下降.复合纤维膜的强度随磷钼酸含量的增加先增大后减小,韧性随PVA含量的增加而增大,随磷钼酸含量的增加而减小.     

Preparation and properties of poly(vinyl alcohol)/exfoliated α-zirconium phosphate nanocomposite films

In this work, poly(vinylalcohol)(PVA)/exfoliated α-zirconium phosphate(e-α-ZrP) nanocomposites of various compositions were created by a solution casting method. The α-ZrP compound was synthesized by refluxing. The characteristic properties of the PVA/e-α-ZrP composite films were examined by thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM) and tensile tests. Tensile tests indicated that with the loading of e-α-ZrP, the tensile strength and the elongation at break were increased by 17.3% and 26.6% compared to neat PVA, respectively. It is noteworthy that optimum film properties were obtained with 0.8 wt% e-α-ZrP, and higher proportions of e-α-ZrP, may be related to the aggregation of e-α-ZrP particles and deterioration of the film properties. On the whole, the nanocomposite PVA/e-α-ZrP systems had mechanical and thermal properties which were superior to that of the neat polymer and its conventionally filled composites.     

Preparation of α-Fe2O3 Nanofiber via Electrospinning Process

A thin PVA/FeCl3 composite fiber was prepared by using sol-gel processing and electrospinning tech niques. A nanofiber of α-Fe2O3 with the diameter of 50-150 nm was obtained via high temperature calcina tion of the PVA/FeCl3 composite fiber. The material was characterized by infra-red(IR) spectroscopy, X-ray diffraction(XRD), and scanning electron microscopy(SEM). The results show that the fiber after the calci nation at 700 ℃ was a pure α-Fe2O3 nanofiber.     

Relationships between nanostructure and thermomechanical properties in poly(vinyl alcohol)/montmorillonite nanocomposite with an entrapped polyelectrolyte

Poly(vinyl alcohol)/montmorillonite (PVA/MOM) hydrogels containing coacervated microparticles of sulfonated polyester (PES) were prepared by direct mixture of the components in water. The system was characterized by using differential scanning calorimetry (DSC), small-angle X-ray scattering (SAXS), and dynamical mechanical analysis (DMA). The influence of PES and MOM on the microstructure of the nanocomposite hydrogels was established. The presence of PES causes a significant change on the crystallinity of PVA. Furthermore, the presence of MOM leads to a hierarchical nanostructure that also contributes to change the crystallinity of PVA. The results of structural investigation are correlated with the mechanical properties of the composites obtained by DMA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2618–2629, 2008     

Cornstarch/Poly(vinyl alcohol) Biocomposite Blend Films: Mechanical Properties,Thermal Behavior,Fire Retardancy,and Antibacterial Activity

In the present study, biocomposite films of starch/poly(vinyl alcohol) (St/PVA) reinforced with delignified Grewia optiva fiber and methyl methacrylate (MMA) grafted fibers were prepared using citric acid as a plasticizer and glutaraldehyde as the cross-linker. The biocomposite films were subjected to evaluation of mechanical properties, biodegradability, and antibacterial properties. The biocomposite films were characterized by using Fourier transform-infrared (FT-IR) spectrophotometry, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA/DTA/DTG). SEM showed good adhesion between St/PVA blend matrix and fibers. The antimicrobial activity of biocomposite films against pathogenic bacteria such as Staphylococcus aureus and Escherichia coli was also explored. The results confirmed that the biocomposite films may be used for food packaging.     

Structure development and physical properties achieved in the drawing and/or annealing of PEN fibers

As‐spun poly(ethylene‐2,6‐naphthalate) (PEN) fibers (i.e., precursors) prepared from high molecular weight polymer were drawn and/or annealed under various conditions. Structure and property variations taking place during the treatment process were followed via wide‐angle X‐ray scattering (WAXS), small‐angle X‐ray scattering, differential scanning calorimetry (DSC), and mechanical testing. Both the WAXS and DSC measurements of the cold‐drawn samples stretched from a low‐speed‐spun amorphous fiber indicate that strain‐induced crystallization can occur at a temperature below the glass‐transition temperature and that the resultant crystal is in the α‐form modification. In contrast, when the same precursor was subjected to constrained annealing, its amorphous characteristics remained unchanged even though the annealing was performed at 200 °C. These results may imply that the application of stretching stress is more important than elevated temperatures in producing α‐form crystallization. The crystalline structure of the hot‐drawn samples depends significantly on the morphology of the precursor fibers. When the precursor was wound at a very low speed and in a predominantly amorphous state, hot drawing induced the formation of crystals that were apparently pure α‐form modification. For the β‐form crystallized precursors wound at higher speeds, a partial crystalline transition from the β form to the α form was observed during the hot drawing. In contrast with the mechanical properties of the as‐spun fibers, those of the hot‐drawn products are not improved remarkably because the draw ratio is extremely limited for most as‐spun fibers in which an oriented crystalline structure has already formed. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1424–1435, 2000     

Chemical modification and characterization of gigaporous polystyrene microspheres as rapid separation of proteins base supports

To overcome the disadvantages of protein denaturation and nonspecific adsorption on poly(styrene‐divinylbenzene) (PS) matrix as chromatographic supports, gigaporous PS microspheres, which we prepared in a previous study, were chemically modified with poly(vinyl alcohol) (PVA) through two‐step reaction. The microspheres were chloroacetylated through Friedel‐Crafts acetylation with chloroacetyl chloride and modified with hydrophilic PVA through Williamson reaction afterward. The modified microspheres were characterized by Fourier transform infrared (FTIR) spectra, X‐ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), mercury porosimetry measurements (MPM), BET nitrogen adsorption measurements, laser scanning confocal microscope (LSCM), and protein adsorption experiments. Results showed that PS microspheres were successfully coated with PVA, while the gigaporous structure could be maintained. Consequently, the hydrophilicity and biocompatibility of modified microspheres was greatly improved and nonspecific adsorption of proteins was significantly decreased. The coatings contained only stable chemical bonds (e.g., C? C, C? O? C) and easily derived hydroxyl moieties. The large pores of gigaporous PS microspheres also facilitated the modification by PVA. After further derivation, the coated gigaporous base supports could apply in various modes of chromatography and have great potentials in high‐speed protein chromatography. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5794–5804, 2008