High‐temperature catalysts for the production of α‐olefins based on iron(II) and iron(III) tridentate bis(imino)pyridine complexes modified by nitrilo group

Series of Fe(II) and Fe(III) tridentate bis(imino)pyridine complexes without nitrilo groups 2–6 and with nitrilo groups 7–13 were synthesized. According to X‐ray analysis, the introduction of nitrilo groups in para‐ and ortho‐positions tends to result in shorter axial Fe? N bonds. Both types of complexes, 2–6 and 9–13 , afforded very productive catalysts for the production of α‐olefins with higher K values and better linearity of Schultz–Flory distribution α‐olefins than the parent methyl substituted Fe(II) complex 1 . Noticeably, the complexes functionalized with a para‐nitrilo group 9–13 tend to make α‐olefins with higher K values of the Schultz–Flory distribution, more ideal distributions, and less of the heavier insoluble fractions of α‐olefins than corresponding nonsymmetrically substituted complexes without para‐nitrilo groups 2–6 . Statistically significant correlations were obtained between % solids of total α‐olefins and the blocked solid angle fraction in the +z hemisphere ( = 51.3%, p = 0.012) and between catalyst productivity and total blocked solid angle fraction ( = 43.5%, p = 0.023). The modest values of show that, while steric effects are significant, they are not the sole factor determining catalyst performance. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 585–611, 2008     

Iron‐based catalysts bearing bis(imido)–pyridine ligands for the polymerization of tert‐butyl acrylate

Iron(II) dichloride complexes bearing a tridentate nitrogen donor ligand were investigated for the homopolymerization of tert‐butyl acrylate after activation with methylaluminoxane. Two new complexes were synthesized, 2,6‐bis[1‐(cyclohexylimido)ethyl]pyridine iron chloride (FeCl₂) and 2,6‐bis[1‐(isopropylimido)ethyl]pyridine FeCl₂, and the single‐crystal X‐ray structure of the latter one was determined. Turnover frequencies of the catalysts during polymerization ranged from 36 to 241 cycles/mol/h. The obtained polymers exhibited weight‐average molecular weights ranging from 24,000 to 438,500 g/mol, and the molar mass distribution varied between 1.8 and 4.3. Activity of the catalytic system and the molar mass of the polymer are influenced by the ligand structure of the complexes as well as other polymerization conditions such as monomer concentration and temperature. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1380–1389, 2003     

Preparation and catalytic properties of bis(imino)pyridine palladium(II) complexes as efficient catalysts for Suzuki cross‐coupling reaction in water

Air‐stable bis(imino)pyridine palladium(II) complexes were synthesized and complex 12 proved to be a highly efficient catalyst for the Suzuki cross‐coupling reaction between aryl bromides and arylboronic acids in air using water as solvent. The coupling reaction proceeded smoothly under mild conditions to provide biaryls in excellent yields and Pd black was not observed. The recycling of the catalysts was also investigated, for up to three cycles, and complex 12 still exhibited good activity. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of temperature on the number of active sites and propagation rate constant at ethylene polymerization over supported bis(imino)pyridine iron catalysts

The inhibition of ethylene polymerization with radioactive carbon monoxide (¹⁴CO) was used to obtain data on the number of active sites (C_P) and propagation rate constant (k_P) at ethylene polymerization in the temperature range of 35–70 °C over supported catalysts LFeCl₂/Al₂O₃, LFeCl₂/SiO₂, and LFeCl₂/MgCl₂ (L: 2,6‐(2,6‐(Me)₂C₆H₃N = CMe)₂C₅H₃N) with activator Al(i‐Bu)₃. The values of effective activation energy (E_eff), activation energy of propagation reaction (E_P), and temperature coefficients of variation of the number of active sites (E_Cp = E_eff ? E_P) were determined. The activation energies of propagation reaction for catalysts LFeCl₂/Al₂O₃, LFeCl₂/SiO₂, and LFeCl₂/MgCl₂ were found to be quite similar (5.2–5.7 kcal/mol). The number of active sites diminished considerably as the polymerization temperature decreased, the E_Cp value being 5.2–6.2 kcal/mol for these catalysts at polymerization in the presence of hydrogen. The reactions of reversible transformations of active centers to the surface hydride species at polymerization in the presence and absence of hydrogen are proposed as the derivation of E_Cp. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6621–6629, 2008     

Bis(imino)pyridine palladium(II) complexes as efficient catalysts for the Suzuki–Miyaura reaction in water

Bis(imino)pyridine palladium(II) complexes 3 and 4 of type [PdCl(L)PF₆] are found to be efficient catalysts for Suzuki–Miyaura reactions of aryl halides and arylboronic acids. The reactions proceed smoothly to generate the corresponding biaryl compounds in moderate to excellent yields. The synthesis of various fluorinated biphenyl derivatives was successfully achieved by the complex 4 catalyzed the Suzuki–Miyaura reaction in the presence of surfactants bearing a long alkyl chain. Copyright © 2009 John Wiley & Sons, Ltd.     

Effects of hydrogen in ethylene polymerization and oligomerization with magnesium chloride‐supported bis(imino)pyridyl iron catalysts

The effects of hydrogen in ethylene polymerization and oligomerization with different bis(imino)pyridyl iron(II) complexes immobilized on supports of type MgCl₂/AlEt_n(OEt)_3–n have been investigated. Hydrogen has a significant activating effect on polymerization catalysts containing relatively bulky bis(imino)pyridyl ligands, but this is not the case in ethylene oligomerization with a catalyst containing relatively little steric bulk in the ligand. It was found that the presence of hydrogen in the latter system led to decreased activity and an overall increase rather than a decrease in product molecular weight, indicating deactivation of active species producing low molecular weight polymer and oligomer. Decreased formation of vinyl‐terminated oligomers in the presence of hydrogen can therefore contribute to the activating effect of hydrogen in ethylene polymerization with immobilized iron catalysts, if it is assumed that hydrogen activation is related to chain transfer after a 2,1‐insertion of a vinyl‐terminated oligomer into the growing polymer chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4054–4061, 2007     

Siloxane‐mediated ethylene oligomerization with iron‐based catalysts: Retarding the polymer formation

This article describes an effective strategy for retarding the simultaneous polymer formation during the ethylene oligomerization with bis(imino)pyridine iron catalysts, by addition of siloxanes as modifiers into such systems. The concurrent effects of a suitable siloxane [e.g., tetraethyl orthosilicate (TEOS), cyclohexylmethyldimethoxysilane (CHMMS), or dicyclopentyldimethoxysilane (DCPMS)] are to increase the activity for the soluble oligomers and dramatically decrease the activity for the insoluble polymers, thus synergistically making a pronounced reduction of the polymer share in the total products. Based on the experimental facts when commercial methylaluminoxane (MAO), trimethylaluminum (TMA)‐depleted MAO, and trialkyl aluminums (e.g., TMA) are applied as co‐catalyst, respectively, the functional mechanism of siloxanes is preliminarily discussed. It is proposed that TMA containing in the commercial MAO makes little contribution to the final product but lowers the activity. And, there may be a close relationship between the anionic MAO cages and the insoluble polymer production. The influence of siloxanes exert on the catalyst systems could be a comprehensive result of the interactions between siloxanes and the catalytic components, through the modulation on both the electronic and steric effects of the active centers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2748–2759     

Ethylene polymerization by sterically and electronically modulated Ni(II) α‐diimine complexes

A series of highly active ethylene polymerization catalysts based on bidendate α‐diimine ligands coordinated to nickel are reported. The ligands are prepared via the condensation of bulky ortho‐substituted anilines bearing remote push–pull substituents with acenaphthenequinone, and the precatalysts are prepared via coordination of these ligands to (DME)NiBr₂ (DME = 1,2‐dimethoxyethane) to form complexes having general formula [ZN = C(An)‐C(An) = NZ]NiBr₂ [Z = (4‐NH₂‐3,5‐C₆H₂R₂)₂CH(4‐C₆H₄Y); An, acenaphthene quinone; R, Me, Et, iPr; Y = H, NO₂, OCH₃]. When activated with methylaluminoxane (MAO) or common alkyl aluminiums such as ethyl aluminium sesquichloride (EAS) all catalysts polymerize ethylene with activities exceeding 10⁷ g‐PE/ mol‐Ni h atm at 30 °C and atmospheric pressure. Among the cocatalysts used EAS records the best activity. Effects of remote substituents on ethylene polymerization activity are also investigated. The change in potential of metal center induced by remote substituents, as evidenced by cyclic voltammetric measurements, influences the polymerization activity. UV–visible spectroscopic data have specified the important role of cocatalyst in the stabilization of nickel‐based active species. A tentative interpretation based on the formation of active and dormant species has been discussed. The resulting polyethylene was characterized by high molecular weight and relatively broad molecular weight distribution, and their microstructure varied with the structure of catalyst and cocatalyst. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1066–1082, 2008     

Syntheses,structures, and luminescent properties of Zn(II) and Cd(II) complexes: 3-D supramolecules based on 2,6-bis(imino)pyridine ligands constructed by hydrogen bonding interactions

Six 5-coordinate 2,6-bis(imino)pyridine metal complexes, [2,6-(ArN=CMe)₂C₅H₃NMCl₂ · nCH₃CN] (Ar = 4-MeC₆H₄, M = Zn, n = 0.5, Zn1, M = Cd, n = 1, Cd1; Ar = 2,6-Et₂C₆H₃, M = Zn, n = 0.5, Zn2, M = Cd, n = 0.5, Cd2; Ar = 2,4,6-Me₃C₆H₂, M = Zn, n = 1, Zn3, M = Cd, n = 1, Cd3), were synthesized in acetonitrile by the reactions of the corresponding bis(imino)pyridines with ZnCl₂ or CdCl₂ · 2.5H₂O, respectively. The structures of Zn1–Zn3 and Cd1–Cd3 were determined by the single-crystal X-ray diffraction. In all complexes, the ligand is tridentate with further coordination by two chlorides, resulting in a distorted trigonal bipyramid. All complexes self-assemble through hydrogen bonding interactions to form a 3-D supramolecular structure. At 298 K in dichloromethane, all complexes have blue luminescent emissions at 405–465 nm, which can be attributed to ligand-centered π* → π transitions. The zinc and cadmium centers play a key role in enhancing fluorescent emission of the ligands.     

Easily available niobium(V) mixed chloro‐alkoxide complexes as catalytic precursors for ethylene polymerization

The dinuclear [NbCl_n(OR)_(5‐n)]₂ (n = 4, R = Et, 1 ; n = 4, R = CH₂Ph, 2 ; n = 3, R = Et, 3 ; n = 2, R = Et, 4 ; n = 2, R = , 5 ), and [Nb(OEt)₅]₂, 6 , and the mononuclear niobium compounds NbCl₄[κ²? OCH₂CH(R′)OR] (R = Me, R′ = H, 7 ; R = Et, R′ = H, 8 ; R = CH₂Cl, R′ = H, 9 ; R = CH₂CH₂OMe, R′ = H, 10 ; R = R′ = Me, 11 ), NbBr₄[κ²? OCH₂CH₂OMe], 12 , and NbCl₃(κ²? OCH₂CH₂OMe)(κ¹? OCH₂CH₂OMe), 13 , were tested in ethylene polymerization. Optimized reaction conditions included the use of D‐MAO as co‐catalyst and chlorobenzene as solvent at 50 °C. Complex 7 , whose X‐Ray structure is described here for the first time, exhibited the highest activity ever reported for a niobium catalyst in alkene polymerization [151 kg_polymer × mol_Nb^?1 × h^?1 × bar^?1]. Compounds 1 , 3‐5 , 8 , 13 showed activities similar to that of 7 . Linear polyethylenes (characterized by FT‐IR, NMR, GPC, and DSC analyses) with a broad polydispersivity were obtained. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Unique catalytic behavior of chromium complexes having halogenated bis(imino)pyridine ligands for ethylene polymerization

Reactions of CrCl₃(thf)₃ with bis(imino)pyridines gave a series of {bis(imino)pyridine}chromium(III) trichloride complexes, {2,6‐(RN?CMe)₂C₅H₃N}CrCl₃ [R = C₆HPr₂‐2,6 ( 1 ), C₆H₃Et₂‐2,6 ( 2 ), C₆H₃Me₂‐2,6 ( 3 ), C₆H₂Me₃‐2,4,6 ( 4 ), C₆H₃Me₂‐3,5 ( 5 ), C₆H₅ ( 6 ), cyclohexyl ( 7 ), 2‐methyl‐1‐naphthyl ( 8 ), C₆H₃F₂‐2,6 ( 9 ), C₆H₃Br₂‐2,6 ( 10 ), C₆F₅ ( 11 )]. Pseudo‐octahedral geometries of 6 , 10 , and 11 were revealed by X‐ray crystallography. The complexes having bulky substituents such as 1 – 4 showed high activity for ethylene polymerization in combination with modified methylaluminoxane (MMAO) to give linear polyethylenes. In sharp contrast, the pentafluorophenyl complex 11 /modified methylaluminoxane system was found to be moderately active for ethylene homopolymerization to give moderately branched polyethylene with only ethyl branches. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3368–3375, 2005     

Addition polymerization of norbornene using bis(β‐ketoamino)nickel(II)/tris(pentafluorophenyl)borane catalytic systems

Norbornene polymerizations proceeded in toluene with bis(β‐ketoamino)nickel(II) {Ni[CH₃C(O)CHC(NR)CH₃]₂ [R = phenyl ( 1 ) or naphthyl ( 2 )]} complexes as the catalyst precursors and the organo‐Lewis compound tris(pentafluorophenyl)borane [B(C₆F₅)₃] as a unique cocatalyst. The polymerization conditions, such as the cocatalyst/catalyst ratio (B/Ni), catalyst concentration, monomer/catalyst ratio (norbornene/Ni), polymerization temperature, and polymerization time, were studied in detail. Both bis(β‐ketoamino)nickel(II)/B(C₆F₅)₃ catalytic systems showed noticeably high conversions and activities. The polymerization activities were up to 3.64 × 10⁷ g of polymer/mol of Ni h for complex 1 /(B(C₆F₅)₃ and 3.80 × 10⁷ g of polymer/mol of Ni h for complex 2 /B(C₆F₅)₃, and very high conversions of 90–95% were maintained; both polymerizations provided high‐molecular‐weight polynorbornenes with molecular weight distributions (weight‐average molecular weight/number‐average molecular weight) of 2.5–3.0. The achieved polynorbornenes were confirmed to be vinyl‐addition and atactic polymers through the analysis of Fourier transform infrared, ¹H NMR, and ¹³C NMR spectra, and the thermogravimetric analysis results showed that the polynorbornenes exhibited good thermal stability (decomposition temperature > 410 °C). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4733–4743, 2007     

Structure and Photosynthetic Mimicking of Bis（2,6—bis（benzimidazol—2—yl）pyridine）manganese（Ⅱ）

Mn(bzimpy)2(1)[bzimpy=2,6-bis(benzimidazol-2-yl)pyridine],a mononuclear manganese(Ⅱ）complex,was synthesized by the reaction of Mn(OOCMe)2 with bzimpy in absolute ethanol.The complex was structurally characterized by elemental analysis,cyclic voltammetry,and X-ray crystallography.In the complex,the manganese-nitrogen distances were different,and the geometry and the metal ion environment showed the distortion.The cyclic voltammetric measurements have been performed to assess its redox characteristics.The presence of oxidation wave at 0.62V and 0.081V vs.SCE or 0.8V and 1.0v vs.NHE suggested that this complex could catalyze the oxidation of water,therefore,simulate the water-oxidizing complex(WOC) of photosystem Ⅱ (PS Ⅱ).The measurements of photoreduction of 2,6-dichlorophenolindophenol (DCPIP),and oxygen evolution in the manganess-depleted and the comples 1-reconstituted PS Ⅱ preparations just support our conjecture.     

Nickel(II) and palladium(II) complexes with α‐dioxime ligands as catalysts for the vinyl polymerization of norbornene in combination with methylaluminoxane,tris(pentafluorophenyl)borane,or triethylaluminum cocatalyst systems

Nickel(II) and palladium(II) complexes with α‐dioxime ligands dimethylglyoxime, diphenylglyoxime, and 1,2‐cyclohexanedionedioxime represent six new precatalysts for the polymerization of norbornene that can be activated with methylaluminoxane (MAO), the organo‐Lewis acid tris(pentafluorophenyl)borane [B(C₆F₅)₃], and triethylaluminum (TEA) AlEt₃. The palladium but not the nickel precatalysts could also be activated by B(C₆F₅)₃ alone, whereas two of the three nickel precatalysts but none of the palladium systems are somewhat active with only TEA as a cocatalyst. It was possible to achieve very high polymerization activities up to 3.2 · 10⁷ g_polymer/mol_metal · h. With the system B(C₆F₅)₃/AlEt₃, the activation process can be formulated as the following two‐step reaction: (1) B(C₆F₅)₃ and TEA lead to an aryl/alkyl group exchange and result in the formation of Al(C₆F₅)_nEt_3?n and B(C₆F₅)_3?nEt_n; and (2) Al(C₆F₅)_nEt_3?n will then react with the precatalysts to form the active species for the polymerization of norbornene. Variation of the B:Al ratio shows that Al(C₆F₅)Et₂ is sufficient for high activation. Gel permeation chromatography indicated that it was possible to control the molar mass of poly(norbornene)s by TEA or 1‐dodecene as chain‐transfer agents; the molar mass can be varied in the number‐average molecular weight range from 2 · 10³ to 9 · 10⁵ g · mol^?1. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3604–3614, 2002     

Vinyl polymerization of norbornene by bis(nitro‐substituted‐salicylaldiminate)nickel(II)/methylaluminoxane catalysts

The polymerization of norbornene has been investigated in the presence of different bis(salicylaldiminate)nickel(II) precursors activated by methylaluminoxane. These systems are highly active in affording nonstereoregular vinyl‐type polynorbornenes (PNBs) with high molecular weights. The productivity of the catalytic systems is strongly enhanced (up to 35,000 kg of PNB/mol of Ni × h) when electron‐withdrawing nitro groups are introduced on the phenol moiety. On the contrary, the presence of bulky alkyl groups on the N‐aryl moiety of the ligand does not substantially affect the activity or characteristics of the resulting PNBs. The catalytic performances are also markedly influenced by the reaction parameters, such as the nature of the solvent, the reaction time, and the monomer/Ni and Al/Ni molar ratios. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1514–1521, 2006     

Crystal Structure and Ethylene Oligomerization Catalytic Activity of {2-Carbethoxy-6-[1-[（2,6-diethylphenyl）imino]ethyl]pyridine}CoCl2

The unsymmetric precursor ethyl 6-acetylpyridine-2-carboxylate （4） was synthesized from 2,6-dimethylpyridine （1）. On the basis of this precursor, a new mono（imino）pyridine ligand （5） and the corresponding Co（Ⅱ） complex {2-carbethoxy-6-[1-[（2,6-diethylphenyl）imino]ethyl]pyridine}CoCl2 （6） were prepared. The crystal structure of complex indicates that the 2-carbethoxy-6-iminopyridine is coordinated to the cobalt as a tridentate ligand using [N, N, O] atoms, and the coordination geometry of the central cobalt is a distorted trigonal bipyramid, with the pyridyl nitrogen atom and the two chlorine atoms forming the equatorial plane. Being applied to the ethylene oligomedzation, this cobalt complex shows catalytic activity of 1.820× 10^4 g/mol-Cooh at 101325 Pa of ethylene at 15.5℃ for 1 h, when 1000 equiv, of methylaluminoxane （MAO） is employed as the cocatalyst.     

Styrene polymerization by ziegler-natta catalysts based on bis(salicylaldiminate)nickel(II) complexes and methyl aluminoxane

The homopolymerization of styrene by using different catalytic systems based on bis(salicylaldiminate)nickel(II) and methylaluminoxane was investigated. In particular, the effect on catalyst activity and polymer characteristics by electron withdrawing groups located on the phenolic moiety was studied. The influence of the bulkiness of the substituents on the N-aldimine ligand was also ascertained. Finally the catalytic performances were investigated as a function of the main reaction parameters, such as temperature, Al/Ni molar ratio and duration.     

Oxidative degradation of the organometallic iron(II) complex [Fe{bis[3‐(pyridin‐2‐yl)‐1H‐imidazol‐1‐yl]methane}(MeCN)(PMe3)](PF6)2: structure of the ligand decomposition product trapped via coordination to iron(II)

Iron is of interest as a catalyst because of its established use in the Haber–Bosch process and because of its high abundance and low toxicity. Nitrogen‐heterocyclic carbenes (NHC) are important ligands in homogeneous catalysis and iron–NHC complexes have attracted increasing attention in recent years but still face problems in terms of stability under oxidative conditions. The structure of the iron(II) complex [1,1′‐bis(pyridin‐2‐yl)‐2,2‐bi(1H‐imidazole)‐κN³][3,3′‐bis(pyridin‐2‐yl‐κN)‐1,1′‐methanediylbi(1H‐imidazol‐2‐yl‐κC²)](trimethylphosphane‐κP)iron(II) bis(hexafluoridophosphate), [Fe(C₁₇H₁₄N₆)(C₁₆H₁₂N₆)(C₃H₉P)](PF₆)₂, features coordination by an organic decomposition product of a tetradentate NHC ligand in an axial position. The decomposition product, a C—C‐coupled biimidazole, is trapped by coordination to still‐intact iron(II) complexes. Insights into the structural features of the organic decomposition products might help to improve the stability of oxidation catalysts under harsh conditions.     

Copolymerization of norbornene and 5‐norbornene‐2‐yl acetate using novel bis(β‐ketonaphthylamino)Ni(II)/B(C6F5)3/AlEt3 catalytic system

Vinyl‐type copolymerization of norbornene (NBE) and 5‐NBE‐2‐yl‐acetate (NBE‐OCOMe) in toluene were investigated using a novel homogeneous catalyst system based on bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃/AlEt₃. The copolymerization behavior as well as the copolymerization conditions, such as the levels of B(C₆F₅)₃ and AlEt₃, temperature, and monomer feed ratios, which influence on the copolymerization were examined. Without combination of AlEt₃, the catalytic bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃ exhibited very high catalyst activity for polymerization of NBE. Combination of AlEt₃ in catalyst system resulted in low conversion for polymerization of NBE. For copolymerization of NBE and NBE‐OCOMe, involvement of AlEt₃ in catalyst is necessary. Slight addition of NBE‐OCOMe in copolymerization of NBE and NBE‐OCOMe gives rise to significant increase of catalyst activity for catalytic system bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃/AlEt₃. Nevertheless, excess increase of the NBE‐OCOMe content in the comonomer feed ratios results in decrease of conversion as well as activity of catalyst. The achieved copolymers were confirmed to be vinyl‐addition copolymers through the analysis of FTIR, ¹H NMR, and ¹³C NMR spectra. ¹³C NMR studies further revealed the composition of the copolymer and the incorporation rate was 7.6–54.1 mol % ester units at a content of 30–90 mol % of the NBE‐OCOMe in the monomer feeds ratios. TGA analysis results showed that the copolymer exhibited good thermal stability (T_d > 410 °C) and failed to observe the glass transitions temperature over 300 °C. The copolymers are confirmed to be noncrystalline by WAXD analysis results and show good solubility in common organic solvents. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3990–4000, 2009     

Preparation of linear α‐olefins to high‐molecular weight polyethylenes using cationic α‐diimine nickel(II) complexes containing chloro‐substituted ligands

A series of α‐diimine nickel(II) complexes containing chloro‐substituted ligands, [(Ar)N?C(C₁₀H₆)C?N(Ar)]NiBr₂ ( 4a , Ar = 2,3‐C₆H₃Cl₂; 4b , Ar = 2,4‐C₆H₃Cl₂; 4c , Ar = 2,5‐C₆H₃Cl₂; 4d , Ar = 2,6‐C₆H₃Cl₂; 4e , Ar = 2,4,6‐C₆H₂Cl₃) and [(Ar)N?C(C₁₀H₆)C?N(Ar)]₂NiBr₂ ( 5a , Ar = 2,3‐C₆H₃Cl₂; 5b , Ar = 2,4‐C₆H₃Cl₂; 5c , Ar = 2,5‐C₆H₃Cl₂), have been synthesized and investigated as precatalysts for ethylene polymerization. In the presence of modified methylaluminoxane (MMAO) as a cocatalyst, these complexes are highly effective catalysts for the oligomerization or polymerization of ethylene under mild conditions. The catalyst activity and the properties of the products were strongly affected by the aryl‐substituents of the ligands used. Depending on the catalyst structure, it is possible to obtain the products ranging from linear α‐olefins to high‐molecular weight polyethylenes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1964–1974, 2006