Supramolecular micellization and pH‐inducible gelation of a hydrophilic block copolymer by block‐specific threading of α‐cyclodextrin

A poly(ethylene glycol)‐b‐poly(L ‐lysine) diblock copolymer (PEG‐b‐PLL) was synthesized. Micellization of this hydrophilic copolymer due to the block‐specific threading of α‐cyclodextrin (α‐CD) molecules onto the polyethylene glycol (PEG) block yielded supramolecular‐structured nanoparticles, which undergoes pH‐inducible gelation in aqueous media. The pH‐inducible gelation of supramolecular micelle in water appeared to be completely reversible upon pH changes. The synergetic effect of selective complexation between PEG block and α‐CD and the pH‐inducible hydrophobic interaction between PLL blocks at pH 10 was believed to be the driving force for the formation of the supramolecular hydrogel. ¹H NMR and wide angle X‐ray diffraction (WAXD) were employed to confirm the inclusion complexation between α‐CD and PEG block. Meanwhile, the morphology of the micellized nanoparticles was investigated by transmission electron microscopy (TEM). The thermal stability of inclusion complexes (ICs) was investigated and the rheologic experiment was conducted to reveal the micelle‐gel transition. Such pH‐induced reversible micelle‐gel transition of the supramolecular aggregates may find applications in several fields, for example as advanced biomedical material possessing stimulus‐responsiveness. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 782–790, 2008     

Supramolecular inclusion complexation of polyhedral oligomeric silsesquioxane capped poly(ε‐caprolactone) with α‐cyclodextrin

Supramolecular inclusion complexes (ICs) involving polyhedral oligomeric silsesquioxane (POSS) capped poly(?‐caprolactone) (PCL) and α‐cyclodextrin (α‐CD) were investigated. POSS‐terminated PCLs with various molecular weights were prepared via the ring‐opening polymerization of ?‐caprolactone (CL) with 3‐hydroxypropylheptaphenyl POSS as an initiator. Because of the presence of the bulky silsesquioxane terminal group, the inclusion complexation between α‐CD and the POSS‐capped PCL was carried out only with a single end of a PCL chain threading inside the cavity of α‐CD, which allowed the evaluation of the effect of the POSS terminal groups on the efficiency of the inclusion complexation. The X‐ray diffraction results indicated that the organic–inorganic ICs had a channel‐type crystalline structure. The stoichiometry of the organic–inorganic ICs was quite dependent on the molecular weights of the POSS‐capped PCLs. With moderate molecular weights of the POSS‐capped PCLs (e.g., M_n =3860 or 9880), the stoichiometry was 1:1 mol/mol (CL unit/α‐CD), which was close to the literature value based on the inclusion complexation of α‐CD with normal linear PCL chains with comparable molecular weights. When the PCL chains were shorter (e.g., for the POSS‐capped PCL of M_n = 1720 or 2490), the efficiency of the inclusion complexation decreased. The decreased efficiency of the inclusion complexation could be attributed to the lower mobility of the bulky POSS group, which restricted the motion of the PCL chain attached to the silsesquioxane cage. This effect was pronounced with the decreasing length of the PCL chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1247–1259, 2007     

Supramolecular end-group separation of linear polymers with different terminals through host–guest interaction

By increasing the hydrophobicity of end group, the complexation rate between α-cyclodextrin (α-CD) and poly(ethylene glycol) (PEG) derivative speeds up greatly. Based on such a huge difference of complexation kinetics, the PEG derivative with palmityloxy terminal (PEG-C16) can be successfully separated from a carboxylic acid end-functionalized analogue (PEG-COOH) by once supramolecular purification. Adding α-CD into the aqueous solution of PEG-C16/PEG-COOH mixture, PEG-C16 is encapsulated into α-CD cavity to form the crystalline inclusion complex in a very short time, while almost all of PEG-COOH molecules are still reserved in the aqueous solution. After dichloromethane extraction, the pure PEG-C16 is obtained. Moreover, the host CD can be recycled. Thus, it is an efficient green way to separate and purify the linear polymers with different terminal functionality.     

Effects of solvent,casting temperature,and guest/host stoichiometries on the properties of shape memory material based on partial α‐CD‐PEG inclusion complex

A series of supramolecular inclusion complex (IC) films were formed by threading α‐cyclodextrin (α‐CD) molecules over poly(ethylene glycol) (PEG), according to the designed ratio of α‐CD/PEG. Because of containing α‐CD‐PEG inclusion crystallites as physical crosslinks and uncovered PEG crystallites as “switch phase”, the resulting supramolecular α‐CD‐PEG partial ICs displayed a shape memory effect. The properties of the materials were investigated by ¹H‐NMR, X‐ray diffraction (XRD), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and swelling measurement. It was found that the casting temperature, solvent, and the ratio of α‐CD‐PEG inclusion/PEG had great influence on the formation and properties of α‐CD‐PEG partial ICs. The modes of complexes on different conditions were proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 951–957, 2010     

Heat‐Induced Supramolecular Organogels Composed of α‐Cyclodextrin and “Jellyfish‐Like” β‐Cyclodextrin–Poly(ε‐caprolactone)

In general, the complexation and gelation behavior between biocompatible poly(ε‐caprolactone) (PCL) derivatives and α‐cyclodextrin (α‐CD) is extensively studied in water, but not in organic solvents. In this article, the complexation and gelation behavior between α‐CD and multi‐arm polymer β‐cyclodextrin‐PCL (β‐CD‐PCL) with a unique “jellyfish‐like” structure are thoroughly investigated in organic solvent N,N‐dimethylformamide and a new heat‐induced organogel is obtained. However, PCL linear polymers cannot form organogels under the same condition. The complexation is characterized by rheological measurements, DSC, XRD, and SEM. The SEM images reveal that the complexes between β‐CD‐PCL and α‐CD present a novel topological helix porous structure which is distinctly different from the lamellar structure formed by PCL linear polymers and α‐CD, suggesting the unique “jellyfish‐like” structure of β‐CD‐PCL is crucial for the formation of the organogels. This research may provide insight into constructing new supramolecular organogels and potential for designing new functional biomaterials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1598–1606     

Construction of different supramolecular polymer systems by combining the host–guest and hydrogen‐bonding interactions

Poly(ethylene glycol) (PEG) can form either the inclusion complex with α‐cyclodextrins (α‐CDs) through host–guest interactions or the interpolymer complex with poly(acrylic acid) (PAA) through hydrogen‐bonding interaction. Mixing α‐CD, PEG, and PAA ternary components in an aqueous solution, the competition between host–guest and hydrogen‐bonding interactions occurs. Increasing feed ratio of α‐CD:EG:AA from 0:1:1 to 0.2:1:1 (molar ratio), various interesting supramolecular polymer systems, such as hydrogen‐bonding complex, dynamic polyrotaxane, crystalline inclusion complex, and thermoresponsive hydrogel, are successively obtained. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1114–1120, 2008     

Injectable supramolecular hybrid hydrogels formed by MWNT‐grafted‐poly(ethylene glycol) and α‐cyclodextrin

Poly(ethylene glycol)‐grafted‐multiwalled carbon nanotube (MWNT‐g‐PEG) was synthesized by a coupling reaction and formed inclusion complexes (ICs) after selective threading of the PEG segment of the MWNT‐g‐PEG through the cavities of α‐cyclodextrins (α‐CDs) units. The polypseudorotaxane structures of the as‐obtained hydrogels were confirmed by ¹H NMR, X‐ray diffraction and DSC analyses. The complexation of the PEG segments with α‐CDs and the hydrophobic interaction between the MWNT resulted in the formation of supramolecular hybrid hydrogels with a strong network. Thermal analysis showed that the thermal stability of the hydrogel was substantially improved by up to 100 °C higher than that of native hydrogel. The resultant hybrid hydrogels were found to be thixotropic and reversible, and could be applied as a promising injectable drug delivery system. The mechanical strength of the hybrid hydrogels was greatly improved in comparison with that of the corresponding native hydrogels. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3145–3151, 2010     

Mechanistic investigations of antimony‐catalyzed polycondensation in the synthesis of poly(ethylene terephthalate)

The chemical aspects of poly(ethylene terephthalate) synthesis via the antimony‐catalyzed polycondensation of hydroxy ethylene terephthalate end groups were studied to elucidate its mechanism. A polycondensation mechanism was proposed in which activation occurs by the formation of a chelate ligand on antimony composed of the hydroxyl end group and alcoholic oxygen of the ester of the same end group. The rate‐determining step of the polycondensation reaction was concluded to be the coordination of a second chain end to antimony. The low activity of antimony at a high concentration of hydroxyl end groups was proposed to result from the competition between hydroxyl end groups and the chelate structure leading to the transition state. The high selectivity of antimony is probably due to its relatively low Lewis acidity. Moreover, antimony was found to stabilize hydroxyl end groups against degradation by preventing their complexation to carbonyl functionalities. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1049‐1059, 2006     

Sol–gel transition behavior of biodegradable three‐arm and four‐arm star‐shaped PLGA–PEG block copolymer aqueous solution

Two types of temperature‐sensitive biodegradable three‐arm and four‐arm star‐shaped poly(DL ‐lactic acid‐co‐glycolic acid‐b‐ethylene glycol) (3‐arm and 4‐arm PLGA–PEG) were successfully synthesized via the coupling reaction of 3‐arm and 4‐arm PLGA and α‐monocarboxyl‐ω‐monomethoxypoly(ethylene glycol) (CMPEG). In dilute aqueous solutions, star PLGA–PEGs showed the temperature‐ and concentration‐dependent formation and aggregation of micelles over specific concentration and specific temperature. With increasing the molecular weight and the relative hydrophobicity of hydrophobic PLGA block, critical micelle temperature (CMT) decreased. Aqueous solution of 4‐arm PLGA–PEG started to form micelles at lower temperature and showed sharper temperature‐dependent growth in micelle size. These results are due to the enhanced hydrophobicity of PLGA block. On the other hand, at high concentration, two types of 3‐arm and 4‐arm PLGA–PEG showed sol–gel–sol transition behavior as the temperature was increased. The 3‐arm and 4‐arm PLGA–PEG showed sol–gel transition at higher polymer concentrations (above 24 wt %) than the PEG–PLGA–PEG triblock copolymer. As the molecular weight and the relative hydrophobicity of PLGA block increased, the critical gel concentration (CGC) decreased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 888–899, 2006     

Investigation of interpolymer complexation in swollen polyelectolyte networks using solid‐state NMR spectroscopy

Copolymer networks of poly(methacrylic acid) (PMAA) and poly(ethylene glycol) (PEG) exhibit large changes in their swelling behavior over a narrow pH range due to the reversible formation/dissociation of interpolymer complexes between the polymer chains. Intepolymer complexation occurs in copolymer gels of PMAA and PEG due to hydrogen bonding between protonated acid groups and the ether groups of the PEG. Because of their nature, these gels have been identified for use as delivery vehicles for macromolecular drugs. In this work, solid‐state, nuclear magnetic resonance nuclear Overhauser enhancement (NOE) experiments were performed to detect the molecular level complexation between PMAA and deuterated PEG in copolymer blends and crosslinked networks. For gels swollen in acidic media at room temperature or at 37 °C, strong enhancements were detected in the ¹³C resonance of the PEG carbons. The NOE was generated due to energy transfer between the rapidly rotating methyl group protons and the deuterated PEG carbons. The presence of the NOE was indicative of close packing of the polymer chains and was evidence of the presence of the intermacromolecular complexes. In basic solutions, no NOE was detected in the PEG, as the complexes were dissociated and the chains were separated in space. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2823–2831, 2000     

Supramolecular aggregations through the inclusion complexation of cyclodextrins and polymers with bulky end groups

Mono‐polyhedral oligomeric sillsesquioxane‐end capped poly(ε‐caprolactone) (mPPCL) can form inclusion complexes (ICs) with α‐ and γ‐cyclodextrins (CDs) but not with β‐CD. These CD ICs have been characterized with X‐ray diffraction, solid‐state ¹³C cross‐polarization/magic‐angle‐spinning NMR spectroscopy, ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy. The poly(ε‐caprolactone) (PCL) chain of mPPCL is included within the channel provided by the CDs to form a columnar, crystalline structure. The PCL/CD ratios determined by ¹H NMR spectroscopy for the ICs with α‐ or γ‐CDs are higher than the stoichiometries because of the steric hindrance of the bulky polyhedral oligomeric silsesquioxane chain end and result in a fraction of the ε‐caprolactone units free from complexation with the CDs. On the basis of these analyses, we propose some possible structures for these CD/mPPCL ICs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 125–135, 2007     

Noncovalent linkage of telechelic oligo(dimethylsiloxanes) via end group attachment of host‐cyclodextrins and guest‐adamantanes or guest‐ferrocenes

In this article, we report the noncovalent linkage of terminal substituted oligo(dimethylsiloxanes) bearing cyclodextrins (CD) as host endgroups and adamantan or ferrocene, respectively, as guest endgroups. Structural characterization was performed by ¹H NMR‐, IR‐, and mass spectroscopy. Electron microscopy studies show significant differences in the surface structure of the individual derivatives. In addition, the ferrocene‐terminated di‐and poly(dimethylsiloxanes) are distinguished by a red‐ox activity and reversibility, which also makes the complexes between the ferrocene‐ and CD functionalized siloxanes switchable via electrochemical stimuli. The evidence for a successful complexation of the end groups, and thus the successful supramolecular formation of the siloxane strands, was even performed by shift of the protons in the ¹H NMR spectra. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2472–2482     

Water-soluble dendrimer–poly(ethylene glycol) starlike conjugates as potential drug carriers

The design and synthesis of a new dendrimer–poly(ethylene glycol) (PEG) conjugate that may be used as a model drug carrier are described. The starting material is a polyether dendrimer with two different types of chain end functionalities. The dendritic assembly is made water soluble through attachment of short PEG chains to the dendrimer via one type of functionality. The remaining chain end functionalities then were used to incorporate model drug molecules of varying polarity into the modified dendrimer. Cholesterol and two amino acid derivatives were selected as model drugs for attachment through their respective hydroxyl, carboxylic acid, and amino functional groups to the dendrimer via carbonate, ester, and carbamate linkages. The resulting water-soluble dendrimer-model drug conjugates were characterized by matrix-assisted laser desorption ionization time of flight (MALDI-TOF) mass spectrometry. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3492–3503, 1999     

Poly(ethylene imine)‐graft‐poly(ethylene oxide) brush‐like copolymers: Preparation,thermal properties,and selective supramolecular inclusion complexation with α‐cyclodextrin

Poly(ethylene imine)‐graft‐poly(ethylene oxide) (PEI‐g‐PEO) copolymers were synthesized via Michael addition reaction between acryl‐terminated poly(ethylene oxide) methyl ether (PEO) and poly(ethylene imine) (PEI). The brush‐like copolymers were characterized by means of Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. It is found that the crystallinity of the PEO side chains in the copolymers remained unaffected by the PEI backbone whereas the crystal structure of PEO side chains was altered to some extent by the PEI backbone. The crystallization behavior of PEO blocks in the copolymers suggests that the bush‐shaped copolymers are microphase‐separated in the molten state. The PEO side chains of the copolymers were selectively complexed with α‐cyclodextrin (α‐CD) to afford hydrophobic side chains (i.e., PEO/α‐CD inclusion complexes). The X‐ray diffraction (XRD) shows that the inclusion complexes (ICs) of the PEO side chains displayed a channel‐type crystalline structure. It is identified that the stoichiometry of the inclusion complexation of the PEI‐g‐PEO with α‐CD is close to that of the control PEO with α‐CD. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2296–2306, 2008     

Synthesis and facile end‐group quantification of functionalized PEG azides

Azido‐functionalized poly(ethylene glycol) (PEG) derivatives are finding ever‐increasing applications in the areas of conjugation chemistry and targeted drug delivery by their judicious incorporation into nanoparticle‐forming polymeric systems. Quantification of azide incorporation into such PEG polymers is essential to their effective use. ¹H Nuclear Magnetic Resonance (NMR) analysis offers the simplest approach; however, the relevant adjacent azide‐bearing methylene protons are often obscured by the PEG manifold signals. This study describes the synthesis of 1,2,3‐triazole adducts from their corresponding PEG azides via a convenient, mild click reaction, which facilitates straightforward NMR‐based quantitative end‐group analysis.This method was found to be compatible with many examples of bifunctional azido PEGs with molecular weights ranging from 2 to 18 kDa bearing a variety of functional groups. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2888–2895     

Noncovalently connected micelles based on a β‐cyclodextrin‐containing polymer and adamantane end‐capped poly(ε‐caprolactone) via host–guest interactions

New random copolymers, poly(N‐vinyl‐2‐pyrrolidone‐co‐mono‐6‐deoxy‐6‐methacrylate ethylamino‐β‐cyclodextrin) (PnvpCD) bearing pendent β‐cyclodextrin (CD) groups were synthesized. PnvpCD formed soluble graft‐like polymer complex with adamantane (AD) end‐capped poly(ε‐caprolactone) (PclAD) in their common solvent N‐methyl‐2‐pyrrolidone driven by the inclusion interactions between the CD and AD groups. The formation of the graft complex has been confirmed by viscometry, dynamic light scattering (DLS), and isothermal titration calorimeter. The graft complex self‐assembled further into noncovalently connected micelles in water, which is a selective solvent for the main chain PnvpCD. Transmission electron microscopy, DLS, and atomic force microscopy have been used to investigate the structure and morphology of the resultant micelles. A unique “multicore” structure of the micelles, in which small PclAD domains scattered within the micelles, was obtained under nonequilibrium conditions in the preparation. However, the micelles prepared in a condition close to equilibrium possess an ordinary core‐shell structure. In both cases, the core and shell are believed to be connected by the AD‐CD inclusion complexation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4267–4278, 2009     

Synthesis and aggregation of poly(valine)‐poly (ethylene glycol) block copolymers

The solubility nature of many medicines presents a challenge for successful delivery of these drugs to the body. Polymeric carriers are potentially viable as vessels for both the protection and transport of these medicinal substances. In an effort to generate polymeric materials for this desired application, A‐B‐A triblock copolymers have been synthesized with a central block composed of hydrophilic poly (ethylene glycol) (PEG) and flanking hydrophobic sequences composed of five valine units terminated with end groups of varying hydrophobicity. These copolymers were constructed by adding amino acids stepwise to the hydrophilic block using solution phase chemistry. The self‐assembly behavior of all polymers was investigated using fluorimetry with a pyrene probe. In general, copolymers with more hydrophobic end groups exhibited lower critical aggregation concentrations (CACs). Fmoc‐terminated copolymers displayed the lowest CAC of 0.032 mg/mL and demonstrated little cytotoxicity when exposed to SW620 colorectal cancer cells. Transmission electron micrographs show the presence of multiple compartments within these spherical assemblies, which may prove useful in encapsulating medicinal substances. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5381–5389, 2008     

Gelation characteristics and applications of poly(ethylene glycol) end capped with hydrophobic biodegradable dipeptides

Poly(ethylene glycol) (PEG) end capped with biodegradable hydrophobic dipeptides shows versatile gelation behavior in a wide range of aqueous and organic solvents. This gelation characteristic is attributed to the aggregation of polymer chains induced by dipeptide end groups. Both PEG molecular weight and molecular structure of end groups control this aggregation by striking a balance between two opposing molecular interactions: solubility of the PEG segment which tends to dissolve the polymer while hydrophobic and intermolecular noncovalent interactions between the end groups induce aggregation. Morphologically, this aggregated structure forms interpenetrating nano sheets with characteristic microstructural features. These gels are biodegradable and possess physicomechanical characteristics suitable for biomedical applications. Furthermore, proteins and hydrophobic model drugs can be encapsulated within the gels from aqueous and organic solvents, respectively, and can be released in a controlled fashion which indicates the applicability of the gels as drug delivery vehicles. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1917–1928     

Dual‐responsive supramolecular inclusion complexes of block copolymer poly(ethylene glycol)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] with α‐cyclodextrin

A new class of temperature and pH dual‐responsive and injectable supramolecular hydrogel was developed, which was formed from block copolymer poly(ethylene glycol)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] (PEG‐b‐PDMAEMA) and α‐cyclodextrin (α‐CD) inclusion complexes (ICs). The PEG‐b‐PDMAEMA diblock copolymers with different ratio of ethylene glycol (EG) to (2‐dimethylamino)ethyl methacrylate (DMAEMA) (102:46 and 102:96, respectively) were prepared by atom transfer radical polymerization (ATRP). ¹H NMR measurement indicated that the ratio of EG unit to α‐CD in the resulted ICs was higher than 2:1. Thermal analysis showed that thermal stability of ICs was improved. The rheology studies showed that the hydrogels were temperature and pH sensitive. Moreover, the hydrogels were thixotropic and reversible. The self‐assembly morphologies of the ICs in different pH and ionic strength environment were studied by transmission electron microscopy. The formed biocompatible micelles have potential applications as biomedical and stimulus‐responsive material. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2143–2153, 2010     

Supramolecular inclusion complexes of star‐shaped poly(ε‐caprolactone) with α‐cyclodextrin

Both star‐shaped poly(ε‐caprolactone) (PCL) having 4 arms (4sPCL) and 6 arms (6sPCL) and linear PCL having 1 arm (LPCL) and 2 arms (2LPCL) were synthesized and then investigated for inclusion complexation with α‐cyclodextrin (α‐CD). The supramolecular inclusion complexes (ICs) were in detail characterized by ¹H NMR, differential scanning calorimetry, thermogravimetric analysis, wide angle X‐ray diffraction, solid‐state carbon nuclear magnetic resonance spectroscopy using cross‐polarization and magic‐angle spinning, and Fourier transform infrared, respectively. The stoichiometry (CL:CD, mol:mol) of all ICs increased with the increasing branch arm of PCL polymers, and it was in the order of α‐CD‐6sPCL1 ICs > α‐CD‐4sPCL ICs > α‐CD‐2LPCL ICs > α‐CD‐LPCL ICs. All analyses indicated that the branch arms of star‐shaped PCL polymers were included into the hydrophobic α‐CD cavities and their original crystalline properties were completely suppressed. Moreover, the ICs of star‐shaped PCL with α‐CD had a channel‐type crystalline structure similar to that formed between the linear PCL and α‐CD. Furthermore, the thermal stability of the free PCL polymers probably controlled that of the guest polymers included in the ICs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4721–4730, 2005