Synthesis and cleavage of core‐labile poly(alkyl methacrylate) star polymers

Core‐cleavable star polymers were synthesized by the coupling of living anionic poly(alkyl methacrylate) arms with either dicumyl alcohol dimethacrylate (DCDMA) or 2,5‐dimethyl‐2,5‐hexanediol dimethacrylate (DHDMA). This synthetic methodology led to the formation of star polymers that exhibited high molecular weights and relatively narrow molecular weight distributions. The labile tertiary alkyl esters in the DCDMA and DHDMA star polymer cores were readily hydrolyzed under acidic conditions. High‐molecular‐weight star polymer cleavage led to well‐defined arm polymers with lower molecular weights. Hydrolysis was confirmed via ¹H NMR spectroscopy and gel permeation chromatography. Thermogravimetric analysis (TGA) of the star polymers demonstrated that the DCDMA and DHDMA star polymer cores also thermally degraded in the absence of acid catalysts at 185 and 220 °C, respectively, and the core‐cleavage temperatures were independent of the arm polymer composition. The difference in the core‐degradation temperatures was attributed to the increased reactivity of the DCDMA‐derived cores. TGA/mass spectrometry detected the evolution of the diene byproduct of the core degradation and confirmed the proposed degradation mechanism. The DCDMA monomer exhibited a higher degradation rate than DHDMA under identical reaction conditions because of the additional resonance stabilization of the liberated byproduct, which made it a more responsive cleavable coupling monomer than DHDMA. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3083–3093, 2003     

Synthesis of fluorine‐containing star‐shaped poly(vinyl ether)s via arm‐linking reactions in living cationic polymerization

Various types of fluorine‐containing star‐shaped poly(vinyl ether)s were successfully synthesized by crosslinking reactions of living polymers based on living cationic polymerization. Star polymers with fluorinated arm chains were prepared by the reaction between a divinyl ether and living poly(vinyl ether)s with fluorine groups (C₄F₉, C₆F₁₃, and C₈F₁₇) at the side chain using cationogen/Et_1.5AlCl_1.5 in a fluorinated solvent (dichloropentafluoropropanes), giving star‐shaped fluorinated polymers in high yields with a relatively narrow molecular weight distribution. The concentration of living polymers for the crosslinking reaction and the molar feed ratio of a bifunctional vinyl ether to living polymers affected the yield and molecular weight of the star polymers. Star polymers with block arms were prepared by a linking reaction of living block copolymers of a fluorinated segment and a nonfluorinated segment. Heteroarm star‐shaped polymers containing two‐ or three‐arm species were synthesized using a mixture of different living polymer species for the reaction with a bifunctional vinyl ether. The obtained polymers underwent temperature‐induced solubility transitions in various organic solvents, and their concentrated solutions underwent sol–gel transitions, based on the solubility transition of a thermoresponsive fluorinated segment. Furthermore, a slight amount of fluorine groups were shown to be effective for physical gelation when those were located at the arm ends of a star polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Precise synthesis of well‐defined dendrimer‐like star‐branched polymers by iterative methodology based on living anionic polymerization

Dendrimer‐like star‐branched polymers recently developed as a new class of hyperbranched polymers, which resemble well‐known dendrimers in branched architecture, but comprise polymer chains between junctions, are reviewed in this highlight article. In particular, we focus on the precise synthesis of various dendrimer‐like star‐branched polymers and block copolymers by the recently developed methodology based on iterative divergent approach using living anionic polymers and 1,1‐bis(3‐tert‐butyldimethylsilyloxymethylphenyl)ethylene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6659–6687, 2006     

Synthesis of low polydispersity polybutadiene and polyethylene stars by convergent living anionic polymerization

Star‐shaped polybutadiene stars were synthesized by a convergent coupling of polybutadienyllithium with 4‐(chlorodimethylsilyl)styrene (CDMSS). CDMSS was added slowly and continuously to the living anionic chains until a stoichiometric equivalent was reached. Gel permeation chromatography‐multi‐angle laser light scattering (GPC‐MALLS) was used to determine the molecular weights and molecular weight distribution of the polybutadiene polymers. The number of arms incorporated into the star depended on the molecular weight of the initial chains and the rate of addition of the CDMSS. Low molecular weight polybutadiene arms (M_n = 640 g/mol) resulted in polybutadiene star polymers with an average of 12.6 arms, while higher molecular weight polybutadiene arms (M_n = 16,000 g/mol) resulted in polybutadiene star polymers with an average of 5.3 arms. The polybutadiene star polymers exhibited high 1,4‐polybutadiene microstructure (88.3–93.1%), and narrow molecular weight distributions (M_w/M_n = 1.11–1.20). Polybutadiene stars were subsequently hydrogenated by two methods, heterogeneous catalysis (catalytic hydrogenation using Pd/CaCO₃) or reaction with p‐toluenesulfonhydrazide (TSH), to transform the polybutadiene stars into polyethylene stars. The hydrogenation of the polybutadiene stars was found to be close to quantitative by ¹H NMR and FTIR spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 828–836, 2006     

Star‐branched polystyrenes by nitroxide living free‐radical polymerization

Star‐branched polystyrenes, with polydispersity indices of 1.15–1.56 and 4–644 equal arms, were synthesized by the reaction of 2,2,6,6‐tetramethylpiperidin‐1‐yloxy (TEMPO)‐capped polystyrene (PS‐T) with divinylbenzene (DVB). The characterization of PS‐T and the final star polymers was carried out by size exclusion chromatography, low‐angle laser light scattering, and viscometry. The degree of branching of the star polymers depended on the DVB/PS‐T ratio and the PS‐T molecular weight. An asymmetric (or miktoarm) star homopolymer of the PS_nPS′_n type was made by the reaction of the PS_n symmetric star, which had n TEMPO molecules on its nucleus and consisted of a multifunctional initiator, with extra styrene. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 320–325, 2001     

Investigation of the influence of the architectures of poly(vinyl pyrrolidone) polymers made via the reversible addition–fragmentation chain transfer/macromolecular design via the interchange of xanthates mechanism on the stabilization of suspension polymerizations

Linear, star, and block copolymers based on poly(vinyl pyrrolidone) (PVP) were synthesized with the macromolecular design via the interchange of xanthates (MADIX) process for use as potential stabilizers in suspension polymerization. The design of the leaving group of the dithioxanthate‐based transfer agent was shown to be key to the successful preparation of well‐defined PVP architectures. A linear correlation of the monomer conversion and molecular weight was found in the synthesis of star polymers, whereas the molecular weight distribution remained narrow (polydispersity index < 1.3). Significant side reactions, which typically broaden the molecular weight distribution when R‐designed MADIX agents are used, were absent. The living behavior of the PVP polymerization was furthermore confirmed via chain extension with vinyl acetate, which resulted in the formation of PVP–PVAc block copolymers [where PVAc is poly(vinyl acetate)]. The prepared polymers were used as stabilizers in suspension polymerization to prepare crosslinked poly(vinyl neodecanoate)/ethylene glycol dimethacrylate microspheres. The ratio of the interfacial tension of the aqueous and monomer phases and the overall viscosity were found to have an effect on the diameter of the particles, with PVP star polymers as stabilizers resulting in smaller particles. A smaller interfacial tension, measured when star polymers and block copolymers were used, resulted in the appearance of smaller particles, probably because of more breakup events of the monomer droplets and the enhanced stabilization of the particle surface area. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4372–4383, 2006     

Jacketed polymers: Controlled synthesis of mesogen‐jacketed polymers and block copolymers

The controlled radical polymerization of mesogen‐jacketed liquid crystalline polymers has triggered great interests in synthesis of complex structures as well as well‐defined linear homopolymers with controlled molecular weight and narrow molecular weight distributions. This review highlights the synthetic strategies of controlled radical polymerization of linear homopolymers, star polymers, superbranched polymers, graft polymers, block copolymers, star block copolymers, and so on. The employed living methods include nitroxide‐mediated radical polymerization and atom transfer radical polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 319–330, 2009     

Amphiphilic diblock star polymer catalysts via atom transfer radical polymerization

Diblock star polymers were synthesized via atom transfer radical polymerization from a palladium porphyrin macroinitiator. The arms of the star polymers had an amphiphilic design, with the central Pd-porphyrin surrounded by a relatively hydrophobic block of poly(butyl acrylate) and terminated by a hydrophilic block of poly(oligoethyleneglycol monomethylether monomethacrylate). The size of both the interior and exterior blocks of the polymer arms were tuned over a wide range of molecular weights with the exterior block used to solubilize the stars in polar media. The star polymers showed enhanced reactivity in the oxidation of 2-furaldehyde relative to a small molecule porphyrin, suggesting that the polymer backbone aids with catalytic turnover. Oxygen diffusion studies indicate that the polymer backbone shields the porphyrin excited state from oxygen quenching. Shielding is independent of molecular weight and polymer composition, but it is not pronounced enough to retard the rate of singlet oxygen generation under preparative photooxidation conditions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4939–4951, 2006     

Facile synthesis of comb,star, and graft polymers via reversible addition–fragmentation chain transfer (RAFT) polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerization has been shown to be a facile means of synthesizing comb, star, and graft polymers of styrene. The precursors required for these reactions were synthesized readily from RAFT‐prepared poly(vinylbenzyl chloride) and poly(styrene‐co‐vinylbenzyl chloride), which gave intrinsically well‐defined star and comb precursors. Substitution of the chlorine atom in the vinylbenzyl chloride moiety with a dithiobenzoate group proceeded readily, with a minor detriment to the molecular weight distribution. The kinetics of the reaction were consistent with a living polymerization mechanism, except that for highly crowded systems, there were deviations from linearity early in the reaction due to steric hindrance and late in the reaction due to chain entanglement and autoacceleration. A crosslinked polymer‐supported RAFT agent was also prepared, and this was used in the preparation of graft polymers with pendant polystyrene chains. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2956–2966, 2002     

Controlled anionic synthesis of star‐shaped polystyrene by the incremental addition of divinylbenzene

Star polystyrenes were synthesized from polystyryllithium with an incremental procedure in which equally divided portions of divinylbenzene (DVB) were added periodically. When the addition of DVB was repeated, the content of the unreacted polystyryllithium dramatically decreased, and complete conversion was readily achieved. In the conventional linking reaction, however, in which all the required amounts of DVB were added at once, there was an incomplete conversion of the arm polymer. The arm number of star polymers also continuously increased upon the subsequent addition of DVB. The incremental‐addition method effectively synthesized star polystyrene, minimizing uncoupled polystyrene and reproducibly controlling the arm number of star polystyrene without the formation of gel polymers. The intrinsic viscosity of star polystyrene was measured to determine the highly branched structure of star polystyrene prepared by incremental or one‐shot addition. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 870–878, 2005     

Versatile and controlled synthesis of resorbable star‐shaped polymers using a spirocyclic tin initiator—Reaction optimization and kinetics

A spirocyclic tin initiator was synthesized from pentaerythritol ethoxylate and dibutyltin oxide and used to polymerize L ‐lactide with dichloromethane, chloroform, toluene, and chlorobenzene as solvents. The reactions were performed at different temperatures and it is concluded that neither the temperature nor the solvent affects the molecular weight or the molecular weight distribution of the star‐shaped polymers. The reaction rate was significantly increased by raising the reaction temperature or choosing a solvent with a low dielectric constant. All polymers showed a molecular‐weight distribution below 1.19 and a molecular‐weight determined by the initial monomer to initiator concentration ([M]₀/[I]). No induction period was seen for the polymerizations. They were all first order in initiator and the degree of aggregation in toluene at 110 °C was found to be 4/5. The glass transition temperature and the melting temperature of the star‐shaped polymers increase with increasing arm length. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 596–605, 2006     

Dendrimer‐star polymer and block copolymer prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization with dendritic chain transfer agent

A new reversible addition‐fragmentation chain transfer (RAFT) agent, dendritic polyester with 16 dithiobenzoate terminal groups, was prepared and used in the RAFT polymerization of styrene (St) to produce star polystyrene (PSt) with a dendrimer core. It was found that this polymerization was of living characters, the molecular weight of the dendrimer‐star polymers could be controlled and the polydispersities were narrow. The dendrimer‐star block copolymers of St and methyl acrylate (MA) were also prepared by the successive RAFT polymerization using the dendrimer‐star PSt as macro chain transfer agent. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6379–6393, 2005     

Arm‐first synthesis of star polymers with polywedge arms using ring‐opening metathesis polymerization and bifunctional crosslinkers

This work presents a two‐step, one‐pot process to make star polymers with polywedge arms. In a one‐pot reaction, after the polywedge arms are synthesized, crosslinker species are added to the reaction, rapidly forming star polymers. Crosslinker species with different degrees of conformational freedom were designed and synthesized and their capacity to generate star polymers was evaluated. Mass conversions up to 92% and stars with up to 17 arms were synthesized with the most rigid crosslinker. The effects of arm molecular weight and molar ratio of crosslinker to arm on mass conversion and arms per star were explored further. Finally, the size‐molecular weight scaling relationship for polywedges with linear and star architectures was compared, corroborating theoretical results regarding star polymers with arms much larger than their core. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 732–740     

Synthesis of star‐shaped polystyrenes via nitroxide‐mediated stable free‐radical polymerization

High molecular weight star‐shaped polystyrenes were prepared via the coupling of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) terminated polystyrene oligomers with divinylbenzene (DVB) in m‐xylene at 138 °C. The optimum ratio of the coupling solvent (m‐xylene) to divinylbenzene was determined to be 9 to 1 based on volume. Linear polystyrene oligomers (M_n = 19,300 g/mol, M_w/M_n = 1.10) were prepared in bulk styrene using benzoyl peroxide in the presence of TEMPO at approximately 130 °C under an inert atmosphere. Coupling of the TEMPO‐terminated oligomers under optimum conditions resulted in a product with a number average molecular weight exceeding 300,000 g/mol (M_w/M_n = 3.03) after 24 h, suggesting the formation of relatively well‐defined star‐shaped polymers. Additionally, the intrinsic viscosities of the star‐shaped products were lower than calculated values for linear analogs of equivalent molecular weight, which further supported the formation of a star‐shaped architecture. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 216–223, 2001     

New stage in living cationic polymerization: An array of effective Lewis acid catalysts and fast living polymerization in seconds

Our recent extensive research on Lewis acid catalysts with a weak base for the cationic polymerization of vinyl ethers led to unprecedented living reaction systems: fast living polymerization within 1–3 s; a wide choice of metal halides containing Al, Sn, Fe, Ti, Zr, Hf, Zn, Ga, In, Si, Ge, and Bi; and heterogeneously catalyzed living polymerization with Fe₂O₃. The use of added bases for the stabilization of the propagating carbocation and the appropriate selection of Lewis acid catalysts were crucial to the success of such new types of living polymerizations. In addition, the base‐stabilized living polymerization allowed the quantitative synthesis of star‐shaped polymers with a narrow molecular weight distribution via polymer‐linking reactions and the precision synthesis and self‐assembly of stimuli‐responsive block copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1801–1813, 2007.     

R‐RAFT approach for the polymerization of N‐isopropylacrylamide with a star poly(ε‐caprolactone) core

Reversible addition‐fragmentation chain transfer (RAFT) polymerization is a more robust and versatile approach than other living free radical polymerization methods, providing a reactive thiocarbonylthio end group. A series of well‐defined star diblock [poly(ε‐caprolactone)‐b‐poly(N‐isopropylacrylamide)]₄ (SPCLNIP) copolymers were synthesized by R‐RAFT polymerization of N‐isopropylacrylamide (NIPAAm) using [PCL‐DDAT]₄ (SPCL‐DDAT) as a star macro‐RAFT agent (DDAT: S‐1‐dodecyl‐S′‐(α, α′‐dimethyl‐α″‐acetic acid) trithiocarbonate). The R‐RAFT polymerization showed a controlled/“living” character, proceeding with pseudo‐first‐order kinetics. All these star polymers with different molecular weights exhibited narrow molecular weight distributions of less than 1.2. The effect of polymerization temperature and molecular weight of the star macro‐RAFT agent on the polymerization kinetics of NIPAAm monomers was also addressed. Hardly any radical–radical coupling by‐products were detected, while linear side products were kept to a minimum by careful control over polymerization conditions. The trithiocarbonate groups were transferred to polymer chain ends by R‐RAFT polymerization, providing potential possibility of further modification by thiocarbonylthio chemistry. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Anionic synthesis of polystyrene and polybutadiene heteroarm star polymers

The use of living linking reactions of poly(styryl)lithium with 1,3-bis(1-phenylvinyl)benzene followed by crossover reactions with styrene or butadiene monomers has been used to prepare four-armed heteroarm, star-branched polymers. Bimodal molecular weight distributions have been observed for crossover reactions with both styrene and butadiene. Addition of THF ([THF]/[Li]=14–32) for crossover to styrene and lithium sec-butoxide for crossover to butadiene produces monomodal molecular weight distributions. Symmetrical, four-armed star polystyrenes have been synthesized; properties have been compared with a corresponding polymer prepared via a silicon tetrachloride linking reaction. Heteroarm, star-branched polymers with two polystyrene arms and two polybutadiene arms with high 1,4-microstructure have been prepared.     

Synthesis of well‐defined miktoarm star polymers of poly(dimethylsiloxane) by the combination of chlorosilane and benzyl chloride linking chemistry

A series of novel four‐arm A₂B₂ and A₂BC and five‐arm A₂B₂C miktoarm star polymers, where A is poly(dimethylsiloxane) (PDMS), B is polystyrene (PS), and C is polyisoprene (PI), were successfully synthesized by the combination of chlorosilane and benzyl chloride linking chemistry. This new and general methodology is based on the linking reaction of in‐chain benzyl chloride functionalized poly(dimethylsiloxane) (icBnCl–PDMS) with the in‐chain diphenylalkyl (icD) living centers of PS‐DLi‐PS, PS‐DLi‐PI, or (PS)₂‐DLi‐PI. icBnCl–PDMS was synthesized by the selective reaction of lithium PDMS enolate (PDMSOLi) with the chlorosilane groups of dichloro[2‐(chloromethylphenyl)ethyl]methylsilane, leaving the benzyl chloride group intact. The icD living polymers, characterized by the low basicity of DLi to avoid side reactions with PDMS, were prepared by the reaction of the corresponding living chains with the appropriate chloro/bromo derivatives of diphenylethylene, followed by a reaction with BuLi or the living polymer. The combined molecular characterization results of size exclusion chromatography, ¹H NMR, and right‐angle laser light scattering revealed a high degree of structural and compositional homogeneity in all miktoarm stars prepared. The power of this general approach was demonstrated by the synthesis of a morphologically interesting complex miktoarm star polymer composed of two triblock terpolymer (PS‐b‐PI‐b‐PDMS) and two diblock copolymer (PS‐b‐PI) arms. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6587–6599, 2006     

Stereoregular uniform polymers

Progress in stereospecific living polymerizations of methacrylate monomers and the concept and realization of “uniform polymers” and “uniform polymer architectures” are described, with particular emphasis on the fusion of polymer synthesis and characterization and their interactive stimulation, which are inevitable not only for the formation of polymers with highly controlled structures but also for the development of polymer characterization, thereby bringing about the spiral progress of both fields. First, three types of stereospecific living polymerizations are described, including formation of 100% isotactic poly(methyl methacrylate) (PMMA), 98% syndiotactic PMMA, and 96% heterotactic PMMA. Supercritical fluid chromatography (SFC) has proven useful for isolating uniform polymers from these stereoregular PMMAs with narrow molecular weight distributions. Living nature of these stereospecific polymerizations is further utilized for the synthesis of end‐functionalized stereoregular polymers, which are separated into uniform end‐functionalized polymers and used to construct more elaborated uniform polymer architectures such as stereoblock, star, and comb polymers. The uniform polymers have proven quite useful for the studies on the relationship between structures and properties such as glass transition temperature, melting temperature, and solution viscosity. In addition to this, stereoregular uniform polymers are particularly important to understand stereocomplex formation between isotactic and syndiotactic uniform PMMAs. On‐line GPC/NMR measurement at 750 MHz and −15°C in acetone/acetone‐d₆ allowed definitive determination of the compositions of the complexed species and noncomplexed species separately, but not in average. Also interesting is the stereocomplex formation of uniform stereoblock PMMA, where intramolecular complexation in addition to an intermolecular complexation was distinctively observed by GPC analysis in acetone. Uniform star and comb PMMAs were also prepared and found useful to discuss the effect of branching on the solution viscosity. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 245–260, 1999     

Thermolyzable polymer networks and star polymers containing a novel,compact, degradable acylal‐based dimethacrylate cross‐linker: Synthesis,characterization, and thermolysis

A compact, cleavable acylal dimethacrylate cross‐linker, 1,1‐ethylenediol dimethacrylate (EDDMA), was synthesized from the anhydrous iron(III) chloride‐catalyzed reaction between methacrylic anhydride and acetaldehyde. The ability of EDDMA to act as cross‐linker was demonstrated by using it for the preparation of one neat cross‐linker network, four star polymers of methyl methacrylate (MMA), and four randomly cross‐linked MMA polymer networks using group transfer polymerization (GTP). For comparison, the corresponding polymer structures based on the commercially available ethylene glycol dimethacrylate (EGDMA) cross‐linker (isomer of EDDMA) were also prepared via GTP. The number of arms of the EDDMA‐based star polymers was lower than that of the corresponding EGDMA polymers, whereas the degrees of swelling in tetrahydrofuran of the EDDMA‐based MMA networks were higher than those of their EGDMA‐based counterparts. Although none of the EDDMA‐containing polymers could be cleanly hydrolyzed under basic or acidic conditions, they could be thermolyzed at 200 °C within 1 day giving lower molecular weight products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5811–5823, 2007