Effects of surfactant micelles on viscosity and conductivity of poly(ethylene glycol) solutions

The neutral polymer-micelle interaction is investigated for various surfactants by viscometry and electrical conductometry. In order to exclude the well-known necklace scenario, we consider aqueous solutions of low molecular weight poly(ethylene glycol) (2-20)x10(3), whose radial size is comparable to or smaller than micelles. The single-tail surfactants consist of anionic, cationic, and nonionic head groups. It is found that the viscosity of the polymer solution may be increased several times by micelles if weak attraction between a polymer segment and a surfactant exists, epsilon相似文献   

聚合物对非离子十二烷基聚氧乙烯聚氧丙烯醚浊点的影响

测定了水溶性高分子聚乙二醇(PEC1000、PEG2000、PEG6000)和聚乙烯吡咯烷酮(PVP-K30、PVP-K90)对三种非离子表面活性剂十二烷基聚氧乙烯聚氧丙烯醚C12H25O(EO)m(PO)nH(LS36,m=3,n=6;LS5,m=4,n=5;LS54,m=5,n=4)浊点的影响.结果表明,聚乙二醇(PEG)可使三种表面活性剂水溶液浊点降低;而聚乙烯吡咯烷酮(PVP)随其浓度增加,表面活性剂溶液浊点先升高然后又下降;浊点下降程度与聚合物浓度和分子量有关.     

Surfactant--polymer aggregates formed by sodium dodecyl sulfate, poly(N-vinyl-2-pyrrolidone), and poly(ethylene glycol)

The interaction of sodium dodecyl sulfate (SDS) in aqueous solution with poly(N-vinyl-2-pyrrolidone) (M(w) = 55,000 g/mol) in the presence of poly(ethylene glycol) (M(w) = 8000 g/mol) is investigated by electrical conductivity, zeta potential measurements, viscosity measurements, fluorescence spectroscopy, and small-angle X-ray scattering (SAXS). The results indicate that SDS-polymer interaction occurs at low surfactant concentration, and its critical aggregation concentration is fairly dependent on polymer composition. The polymer-supported micelles have average aggregation numbers dependent on surfactant concentration, are highly dissociated when compared with aqueous SDS micelles, and have zeta potentials that increase linearly with the fraction of PVP at constant SDS concentration. The analysis of the SAXS measurements indicated that the PVP/PEG/SDS system forms surface-charged aggregates of a cylindrical shape with an anisometry (length to cross-section dimension ratio) of about 3.0.     

Interaction of sodium dodecyl sulfate with methacrylate-PEG comb copolymers

A series of sodium methacrylate and poly(ethylene glycol) (PEG) comb copolymers (MAA/PEG) with approximate PEG chain lengths of 7, 11, and 22 ethylene oxide units were synthesized by free radical polymerization. Their weight-average molecular mass was found to be approximately 66 000. A commercial sample of a PEG comb polymer with an acrylic backbone was also used in the studies (Sokalan HP 80). The interaction of the MAA/PEG comb polymers and pure sodium methacrylate (SPMA) with sodium dodecyl sulfate (SDS) was studied by ESR spectroscopy using 5-doxyl stearic acid (5-DSA) spin probe and by conductivity measurements. Surfactant aggregation in water occurred at SDS concentrations lower than the surfactant critical micelle concentration (cmc) and depended on the polymer concentration. The observations have been attributed to changes in the effective ionic strength of the systems due to the polymer itself, and it has been concluded that there is no interaction between the MAA/PEG comb copolymers or SPMA and SDS. This has been confirmed by the fact that the decrease in surfactant aggregation concentration is similar in magnitude to the decrease observed on adding NaCl when counterion ion condensation effects are taken into account. It is apparent that the electrostatic repulsions between the surfactant molecules and the methacrylate backbone of the MAA/PEG comb copolymers inhibit association of SDS with the PEG side chains.     

聚合物PVP与表面活性剂AOT相互作用的介观模拟

用耗散颗粒动力学模拟(DPD)方法研究了聚乙烯吡咯烷酮(PVP)与2-乙基己基琥珀酸酯磺酸钠(AOT)之间的相互作用.在三维模拟格子中,聚合物链均方末端距〈r²〉随着表面活性剂浓度的增加呈现一种首先减小,接着增加,然后又减小的趋势.构型和结构分析表明,AOT的加入能够引起聚合物链的二面角分布发生改变,这意味着AOT与PVP产生了相互作用.同时表面活性剂/聚合物体系的聚集形态也可以在DPD三维模拟格子中直观显现出来.     

Effect of ethanol on the interaction between poly(vinylpyrrolidone) and sodium dodecyl sulfate

The effect of ethanol on the interaction between the anionic surfactant sodium dodecyl sulfate (SDS) and the nonionic polymer poly(vinylpyrrolidone) (PVP) has been investigated using a range of techniques including surface tension, fluorescence, electron paramagnetic resonance (EPR), small-angle neutron scattering (SANS), and viscosity. Surface tension and fluorescence studies show that the critical micelle concentration (cmc) of the surfactant decreases to a minimum value around 15 wt % ethanol; that is, it follows the cosurfactant effect. However, in the presence of PVP, the onset of the interaction, denoted cmc(1), between the surfactant and the polymer is considerably less dependent on ethanol concentration. The saturation point, cmc(2), however, reflects the behavior of the cmc in that it decreases upon addition of ethanol. This results in a decrease in the amount of surfactant bound to the polymer [C(bound) = cmc(2) - cmc] at saturation. The viscosity of simple PVP solutions depends on ethanol concentration, but since SANS studies show that ethanol has no effect on the polymer conformation, the changes observed in the viscosity reflect the viscosity of the background solvent. There are significant increases in bulk viscosity when the surfactant is added, and these have been correlated with the polymer conformation extracted from an analysis of the SANS data and with the amount of polymer adsorbed at the micelle surface. Competition between ethanol and PVP to occupy the surfactant headgroup region exists; at low ethanol concentration, the PVP displaces the ethanol and the PVP/SDS complex resembles that formed in the absence of the ethanol. At higher ethanol contents, the polymer does not bind to the ethanol-rich micelle surface.     

Fluorometric and isothermal titration calorimetric studies on binding interaction of a telechelic polymer with sodium alkyl sulfates of varying chain length

Steady-state fluorescence measurements and isothermal titration calorimetric experiments have been performed to study the interaction between a telechelic polymer, pyrene-end-capped poly(ethylene oxide) (PYPY), and sodium alkyl sulfate surfactants having decyl, dodecyl, and tetradecyl hydrocarbon tails. Fluorometric results suggest polymer-surfactant interaction in the very low range of polymer concentrations. The relative variation in the excimer to monomer pyrene emission intensities with varying surfactant concentration reveals that initial addition of surfactant favors intramolecular preassociation until the surfactant molecules start binding with the ethylene oxide (EO) chain. With the growing number of surfactant aggregates along the EO chain, the association becomes hindered due to the polyelectrolyte effect. The results from microcalorimetric titrations in the low concentration range of PYPY solution (approximately 10(-6) M) with alkyl sulfates suggest two kinds of surfactant-polymer interactions, one with the polymer hydrophobic end groups and the other with the ethylene oxide backbone. The overall polymer-surfactant interaction starts at a much lower surfactant concentration for the hydrophobically modified polymers compared to that in the case of unsubstituted poly(ethylene oxide) homopolymer. From the experiments critical aggregation concentration values and the second critical concentration where free micelles start forming have been determined. An endeavor has been made to unveil the mechanism underlying the corresponding associations of the surfactants with the polymer.     

Critical aggregation concentration in mixed solutions of anionic polyelectrolytes and cationic surfactants

We have examined the polymer/surfactant interaction in mixed aqueous solutions of cationic surfactants and anionic polyelectrolytes combining various techniques: tensiometry, potentiometry with surfactant-selective electrodes, and viscosimetry. We have investigated the role of varying polymer charge density, polymer concentration, surfactant chain length, polymer backbone rigidity, and molecular weight on the critical aggregation concentration (Cac) of mixed polymer/surfactant systems. The Cac of these systems, estimated from tensiometry and potentiometry, is found to be in close agreement. Different Cac variations with polymer charge density and surfactant chain length were observed with polymers having persistence lengths either smaller or larger than surfactant micelle size, which might reflect a different type of molecular organization in the polymer/surfactant complexes. The surfactant concentration at which the viscosity starts to decrease sharply is different from the Cac and probably reflects the polymer chain shrinkage due to surfactant binding.     

Velocity‐correlation analysis in polymer–solvent mixtures

The subject of this article is the combined interpretation of intradiffusion and mutual‐diffusion data for polymer–solvent mixtures in terms of integrals over velocity self‐correlation functions and velocity cross‐correlation functions. The combination of mutual‐diffusion, intradiffusion, and activity data allows the evaluation of velocity‐correlation coefficients (VCCs) and distinct‐diffusion coefficients in systems containing one monodisperse solute. This study is the first attempt to extend these approaches to polymers that are polydisperse solutes. Because of the polydispersity, this correlation analysis may become critical for polymers. Its application to polydisperse samples requires the reduction of intradiffusion and mutual‐diffusion coefficients to the same average. After such a reduction, the VCCs and distinct‐diffusion coefficients are evaluated for a homologous series of poly(ethylene glycol)s (PEGs). Attractive PEG–PEG interactions depend on the chain length and concentration of PEG. In this analysis, network formation in PEG–water systems appears to be a smooth process. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 43–51, 2002     

Effect of water-soluble polymers, polyethylene glycol and poly(vinylpyrrolidone), on the gelation of aqueous micellar solutions of Pluronic copolymer F127

The micellization of F127 (E(98)P(67)E(98)) in dilute aqueous solutions of polyethylene glycol (PEG6000 and PEG35000) and poly(vinylpyrrolidone) (PVP K30 and PVP K90) is studied. The average hydrodynamic radius (r(h,app)) obtained from the dynamic light scattering technique increased with increase in PEG concentration but decreased on addition of PVP, results which are consistent with interaction of the micelles with PEG and the formation of micelles clusters, but no such interaction occurs with PVP. Tube inversion was used to determine the onset of gelation. The critical concentration of F127 for gelation increased on addition of PEG and of PVP K30 but decreased on addition of PVP K90. Small-angle X-ray scattering (SAXS) was used to show that the 30 wt% F127 gel structure (fcc) was independent of polymer type and concentration, as was the d-spacing and so the micelle hard-sphere radius. The maximum elastic modulus (G(max)(')) of 30 wt% F127 decreased from its value for water alone as PEG was added, but was little changed by adding PVP. These results are consistent with the packed-micelles in the 30 wt% F127 gel being effectively isolated from the polymer solution on the microscale while, especially for the PEG, being mixed on the macroscale.     

Interactions between metal chlorides and poly(vinyl pyrrolidone) in concentrated solutionsand solid‐state films

The rheological behavior of poly(vinyl pyrrolidone) (PVP)/N,N‐dimethylformamide (DMF) solutions containing metal chlorides (LiCl, CaCl₂, and CoCl₂) were investigated, and the results showed that the nature of the metal ions and their concentration had an obvious effect on the steady‐state rheological behavior of PVP–DMF solutions with different molecular weights. The apparent viscosity of the PVP–DMF solutions increased with an increasing metal‐ion concentration, and the viscosity increment was dependent on the metal‐ion variety_. For a CaCl₂‐containing PVP–DMF solution, for example, the critical shear rate at the onset of shear thinning became smaller with increasing CaCl₂ concentration. It was believed that multiple interactions among metal ions, carbonyl groups of PVP, and amide groups in DMF determined the solution properties of these complex fluids; therefore, ¹³C NMR spectroscopy was used to detect the interactions in systems of PVP–CaCl₂–DMF and PVP–LiCl–DMF solutions. NMR data showed that there were obvious interactions between the metal ions and the carbonyl groups of the PVP segments in the DMF solutions. Furthermore, IR spectra of the PVP/metal chloride composites demonstrated that the interaction between the metal ions and carbonyl groups in the PVP unit occurred and that the PVP chain underwent conformational variations with the metal‐ion concentration. DSC results indicated that the glass transition temperatures of the PVP/metal chloride composites increased with the addition of metal ions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1589–1598, 2007     

Microcalorimetric evidence of hydrophobic interactions between hydrophobically modified cationic polysaccharides and surfactants of the same charge

We synthesized and characterized a series of new polymers-hydrophobically modified cationic polysaccharides-based on dextran having pendant N-(2-hydroxypropyl)-N,N-dimethyl-N-alkylammonium chloride groups randomly distributed along the polymer backbone. These polymers are good candidates for studying the hydrophobic effect on polymer/surfactant association. In previous papers we reported their interactions with oppositely charged surfactants. For further insight into the relative importance of the hydrophobic interaction in the association process now we studied the thermodynamics of the interaction of these hydrophobically modified polymers with surfactants of the same charge (DMRX/CnTAC) by isothermal titration calorimetry (ITC). In order to try to discriminate the solution behavior of these polymer/surfactant systems, we analyzed separately the interaction of unmodified dextran with ionic surfactants and the interactions between the corresponding cationic surfactants. The interaction enthalpies for DMRX/CnTAC systems were derived from a proposed thermodynamic model with equations that describe the polymer-surfactant interactions. The thermodynamic parameters for the DMRX/CnTAC aggregation process as well as surfactant micellization in the presence of the polymer were also calculated. From all the results we were able to ascertain the effect on the interactions of changing the alkyl chain length of the polyelectrolyte pendant groups or the surfactant. The importance of the polymer aggregation state on the mechanism of interaction was also addressed.     

MICELLIZATION STUDIES OF DODECYL BENZENESULFONIC ACID AND ITS INTERACTION WITH POLYVINYLPYRROLIDONE

Dodecyl benzenesulfonic acid (DBSA) surfactant was used in the present study to find the effect of concentration on its electrical conductance in solution from 293-323K above and below the critical micelle concentration (CMC). The micellization parameters i.e. degree of counter ion binding (β), aggregation number (n) and number of counter ion micelle(m) were measured. The interaction of DBSA with polyvinylpyrrolidone (PVP) was also studied at 293K throughconductance and surface tension measure ments. A number of important parameters i.e. critical aggregation concentration (CAC), Gibb‘s free energy (△G) and binding ratio (R) were determined and the effect of NaCl on the CAC and polymer saturation point (PSP) was also investigated.     

Interactions of short-chain surfactants with a nonionic polymer

Aqueous solutions containing poly(vinylpyrrolidone) (PVP) and sodium caprylate (SCAP) or tetraethylammonium perfluorooctanesulfonate have been investigated as a function of the surfactant content, the added polymer, temperature and ionic strength. According to experimental evidence, significant interactions have been observed in both systems, with the occurrence of both critical association and micelle formation thresholds. Volumetric, viscometric, ionic conductivity and surface tension methods have been used to quantify the interactions between surfactants and the polymer in ternary systems containing PVP and SCAP or the polymer and the fluorinated surfactant. In both cases, the width of the interaction region is proportional to the PVP content in the mixture. Temperature and ionic strength have a relevant effect on the width of the interaction region, which decreases on increasing the temperature. Binding onto PVP and micelle formation were analyzed in terms of a mass-action model. In this way, the observed behavior was rationalized and information on the thermodynamics of such mixtures was given. Received: 28 February 2001 Accepted: 5 June 2001     

Specific interactions and phase behavior of ternary poly(2‐vinylpyridine)/poly(N‐vinyl‐2‐pyrrolidone)/bisphenol A blends

Hydrogen‐bonding interactions between bisphenol A (BPA) and two proton‐accepting polymers, poly(2‐vinylpyridine) (P2VPy) and poly(N‐vinyl‐2‐pyrrolidone) (PVP), were examined by Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). The Flory–Huggins interaction‐energy densities of BPA/P2VPy and BPA/PVP blends were determined by the melting point depression method. The interaction parameters for both BPA/P2VPy and BPA/PVP blend systems were negative, demonstrating the miscibility of BPA with P2VPy as well as PVP. The miscibility of ternary BPA/P2VPy/PVP blends was examined by DSC, optical observation, and solid‐state nuclear magnetic resonance spectroscopy. The experimental phase behavior of the ternary blend system agreed with the spinodal phase‐separation boundary calculated using the determined interaction‐energy densities. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1125–1134, 2002     

Sol–gel transition behavior of biodegradable three‐arm and four‐arm star‐shaped PLGA–PEG block copolymer aqueous solution

Two types of temperature‐sensitive biodegradable three‐arm and four‐arm star‐shaped poly(DL ‐lactic acid‐co‐glycolic acid‐b‐ethylene glycol) (3‐arm and 4‐arm PLGA–PEG) were successfully synthesized via the coupling reaction of 3‐arm and 4‐arm PLGA and α‐monocarboxyl‐ω‐monomethoxypoly(ethylene glycol) (CMPEG). In dilute aqueous solutions, star PLGA–PEGs showed the temperature‐ and concentration‐dependent formation and aggregation of micelles over specific concentration and specific temperature. With increasing the molecular weight and the relative hydrophobicity of hydrophobic PLGA block, critical micelle temperature (CMT) decreased. Aqueous solution of 4‐arm PLGA–PEG started to form micelles at lower temperature and showed sharper temperature‐dependent growth in micelle size. These results are due to the enhanced hydrophobicity of PLGA block. On the other hand, at high concentration, two types of 3‐arm and 4‐arm PLGA–PEG showed sol–gel–sol transition behavior as the temperature was increased. The 3‐arm and 4‐arm PLGA–PEG showed sol–gel transition at higher polymer concentrations (above 24 wt %) than the PEG–PLGA–PEG triblock copolymer. As the molecular weight and the relative hydrophobicity of PLGA block increased, the critical gel concentration (CGC) decreased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 888–899, 2006     

Amphiphilic fluorous random copolymer self‐assembly for encapsulation of a fluorinated agrochemical

Amphiphilic self‐folding random copolymers exhibit different solution behaviors depending on the identity of the hydrophobic/hydrophilic units. Herein, it is demonstrated that changing the hydrophilic unit from poly(ethylene glycol) to the sugar trehalose causes increased discrepancy in the polarity difference with a fluorinated hydrophobic segment and changes the aggregation state of the polymer in water. The PEG‐fluorinated and trehalose/PEG‐fluorinated amphiphilic random copolymers were the most efficient at encapsulating a fluorinated agrochemical. The small‐molecule agrochemical exerts a strong influence on the self‐assembly of the polymers, demonstrating that fluorous interactions result in not only intramolecular self‐folding behavior but also intermolecular polymer association to form well‐defined nanoparticles. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 352–359     

Mixed adsorption of poly(vinylpyrrolidone) and sodium dodecylbenzenesulfonate on kaolinite

The mixed adsorption of the nonionic polymer poly(vinylpyrrolidone) (PVP) and the anionic surfactant sodium dodecylbenzenesulfonate (SDBS) on kaolinite has been studied. Both components adsorb from their mixture onto the clay mineral. The overall adsorption process is sensitive to the pH, the electrolyte concentration, and the amounts of polymer and surfactant. Interpretation of the experimental data addresses also the patchwise heterogeneous nature of the clay surface. In the absence of PVP, SDBS adsorbs on kaolinite by electrostatic and hydrophobic interactions. However, when PVP is present, surfactant adsorption at 10(-2) M NaCl is mainly driven by charge compensation of the edges. The adsorption of PVP from the mixture shows similar behavior under different conditions. Three regions can be distinguished based on the changing charge of polymer-surfactant complexes in solutions with increasing SDBS concentration. At low surfactant content, PVP adsorbs by hydrogen bonding and hydrophobic interactions, whereas electrostatic interactions dominate at higher surfactant concentrations. Over the entire surfactant concentration range, polymer-surfactant aggregates are present at the edges. The composition of these surface complexes differs from that in solution and is controlled by the surface charge.     

Rheological and microcalorimetric studies of a model alkali‐soluble associative polymer (HASE) in nonionic surfactant solutions

Rheological experiments were carried out on a 1 wt % hydrophobically modified alkali‐soluble emulsion (HASE) solutions at pH ∼ 9 in the presence of nonionic polyoxyethylene ether type surfactant (C₁₂EO₂₃). The low shear viscosity and dynamic moduli increases at c > cmc until they reach a maximum at a critical concentration, c^m of approximately 1 mM (∼17 times the cmc of free surfactant) and then decrease. The dominant mechanism at cmc < c < c^m is an increase in the number of intermolecular hydrophobic junctions and a strengthening of the overall associative network structure. Above c^m, the disruption of the associative network causes a reduction in the number of junctions and strength of the overall network structure. The influence of C₁₂EO₂₃ on HASE before cmc could not be detected macroscopically by the rheological technique. However, isothermal titration calorimetry enables the determination of complex binding of surfactant to the polymer. Isothermal titration of C₁₂EO₂₃ into 0.1 wt % HASE indicates that the C₁₂EO₂₃ aggregation in water and 0.1 wt % HASE polymer solutions is entropically driven. A reduction in the critical aggregation concentration (cac) confirms the existence of polymer–surfactant interactions. The hydrophobic micellar junctions cause a decrease in the ΔH and ΔS of aggregation of the nonionic surfactant. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2019–2032, 2000     

The Influences of Polymers and Temperature on the Foam Properties of 3‐Dodecylalkoxyl‐2‐hydroxylpropyl Trimethylammonium Chloride

The foam performances of 3‐dodecoxy‐2‐hydroxypropyl trimethylammonium chloride (C₁₂TAC) have been determined in the existence of different relative amount of polymer. The experimental results show that the foaming ability of the mixture systems of the C₁₂TAC/PEG and C₁₂TAC/PVP is stronger than that of the surfactant solutions in the absence of polymer, and with the increase of relative amount of polymer both foaming efficiency and foam stability of the surfactant solutions are evidently enhanced. For the aqueous solution of the surfactant, effect of temperature on foaming properties has also been examined. The results show that both the foaming ability and stability of the foams of the surfactant solutions are highest (or strongest) at 30°C.