Cationic polymerization of isobutyl vinyl ether coinitiated with heteropolyacid or its salts in aqueous medium

The suspension cationic polymerization of isobutyl vinyl ether (IBVE) in aqueous medium could be achieved by using H₃PW₁₂O₄₀, AlPW₁₂O₄₀, FePW₁₂O₄₀, K₃PW₁₂O₄₀, or Na₃PW₁₂O₄₀ as efficient water‐tolerant coinitiators in the presence of HCl. The addition reaction of IBVE with H₂O occurred to form IBVE–H₂O adduct and then subsequent decomposition immediately took place or turned to acetaldehyde diisobutyl acetal (A) in the presence of AlPW₁₂O₄₀, and ( A ) decomposed rapidly to form 2‐isobutanol ( B ) and acetaldehyde ( C ). Cationic polymerization of IBVE in aqueous medium was promoted greatly with increasing HCl concentration and proceeded extremely rapidly to get high polymer yield even at low concentration of AlPW₁₂O₄₀ of 0.3 mM. A sufficient amount of HCl was needed to decrease the hydrolysis of initiator IBVE–HCl and to accelerate the polymerization in aqueous medium simultaneously. The yield and molecular weight of poly(IBVE) increased with increasing concentrations of HCl and AlPW₁₂O₄₀ or with decreasing temperature. The isotactic‐rich poly(IBVE)s with m diad of around 60%, having M_n of 1200–4500 g mol^?1 and monomodal molecular weight distribution could be obtained via cationic polymerization of IBVE in aqueous medium. This is the first example of cationic polymerization of IBVE in aqueous medium coinitiated by heteropolyacid and its salts. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Cationic polymerization behavior of isobutyl vinyl ether with arenesulfonates as non‐salt‐type latent thermal initiators

Substituted and unsubstituted benzenesulfonic acid cyclohexyl esters (1–7) were synthesized, and their possibility as latent thermal initiators in the cationic polymerization of isobutyl vinyl ether (IBVE) was examined to develop novel non‐salt type latent cationic initiators. Thermal decomposition of cyclohexyl p‐nitrobenzenesulfonate (2) in C₆D₆ at 80°C proceeded to exclusively afford cyclohexene as well as p‐nitrobenzenesulfonic acid. Cationic polymerization of IBVE with 1 mol % of an arenesulfonate (1–6) in bulk was carried out at 40–100°C for 12 h. No polymerization took place below 50°C, while the consumption of IBVE depending on both the polymerization temperature and the structure of the arenesulfonates was observed above 60°C. The obtained polyIBVEs showed bimodal GPC curves in several cases, revealing the intervention of two independent propagation species in the polymerization. The cationic polymerization of IBVE with cyclohexyl 2,4,6‐triisopropylbenzenesulfonate (7) at 80°C confirmed the acceleration effect of bulkiness on the polymerization rate. It was concluded that the polymerization was largely dependent on both electronic and steric factors of the aryl groups of the initiators which were directly related to the stability of the sulfonate anions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 293–301, 1999     

Anionic polymerization of methyl methacrylate initiated with late transition‐metal halides/organolithium/triisobutylaluminum systems

Anionic polymerization of methyl methacrylate (MMA) initiated with late transition‐metal halides [manganese chloride (MnCl₂), iron dichloride (FeCl₂), iron trichloride (FeCl₃), cobalt chloride (CoCl₂), or nickel bromide (NiBr₂)]/organolithium [nButyllithium (nBuLi) or phenyllithium (PhLi)]/triisobutylaluminum (iBu₃Al) systems is described. Except for the system with NiBr₂, the polymerizations of MMA afforded narrow molecular weight distribution poly(methyl methacrylate)s (PMMAs) with high molecular weights in quantitative yields at 0 °C in toluene. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) analyses of the PMMAs obtained by the systems with FeCl₂, FeCl₃, and CoCl₂ revealed that the polymers had hydrogen (H) at both chain ends. Accordingly, the reaction of the transition‐metal halides with the organolithium in the presence of iBu₃Al should result in the formation of transition‐metal hydride [M‐H]^? species, which was nucleophilic enough to initiate the MMA polymerization. Because the presence of a six‐membered cyclic structure resulting from backbiting was confirmed from the MALDI‐TOF MS analyses of the PMMA obtained with the metal halide (FeCl₂, FeCl₃, or CoCl₂)/organolithium systems in the absence of iBu₃Al, the introduction of H at the ω‐chain end indicated that iBu₃Al should prevent the backbiting. However, the MnCl₂/nBuLi/iBu₃Al initiating system gave PMMAs bearing H at the α chain end and six‐membered cyclic structure at the ω chain end. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1962–1977, 2003     

Living carbocationic polymerization of isobutyl vinyl ether and the synthesis of poly[isobutylene-b-(isobutyl vinyl ether)]

The MeCH(O-i-Bu)Cl/TiCl₄/MeCONMe₂ initiating system was found to induce the rapid living carbocationic polymerization (LC^⊕Pzn) of isobutyl vinyl ether (IBuVE) at ?100°C. Degradation by dealcoholation which usually accompanies the polymerization of alkyl vinyl ethers by strong Lewis acids is “frozen out” at this low temperature and poly(isobutyl vinyl ether)s (PIBuVEs) with theoretical molecular weights up to ca. 40,000 g/mol (calculated from the initiator/monomer input) and narrow molecular weight distributions (M?_w/M?_n ≤ 1.2) are readily obtained. According to ¹³C-NMR spectroscopy, PIBuVEs prepared by living polymerization at ?100°C are not stereoregular. The MeCH(O-i-Bu)Cl/TiCl₄ combination induces the rapid LC^⊕Pzn of IBuVE even in the absence of N,N-dimethylacetamide (DMA). The addition of the common ion salt, n-Bu₄NCl to the latter system retards the polymerization and meaningful kinetic information can be obtained. The kinetic findings have been explained in terms of TiCl₄. IBuVE and TiCl₄ · IBuVE and TiCl₄ · PIBuVE complexes. The HCl (formal initiator)/TiCl₄/DMA combination is the first initiating system that can be regarded to induce the LC^⊕Pzn of both isobutylene (IB) and IBuVE. Polyisobutylene (PIB)–PIBuVE diblocks were prepared by sequential monomer addition in “one pot” by the 2-chloro-2,4,4-trimethylpentane (TMP-Cl)/TiCl₄/DMA initiating system. Crossover efficiencies are, however, below 35% because the PIB^⊕ + IBuVE → PIB-b-PIBuVE^⊕ crossover is slow. © 1993 John Wiley & Sons, Inc.     

Matrix‐assisted laser desorption ionization time of flight mass spectrometry analysis of living cationic polymerization of vinyl ethers. I. Optimization of measurement conditions for poly(isobutyl vinyl ether)

Matrix‐assisted laser desorption ionization time of flight mass spectrometry (MALDI‐TOF‐MS) was utilized for the analysis of polymers obtained by the living cationic polymerization of isobutyl vinyl ether (IBVE) with the HCl‐VE adduct/SnCl₄/n‐Bu₄NCl initiating system in CH₂Cl₂ at −78 °C. Under optimized analysis conditions, well‐resolved spectra were obtained for samples with number‐average molecular weights of ≤10⁴ with the use of 1,8‐dihydroxy‐9(10H)‐anthracenone (dithranol) as a matrix and sodium trifluoroacetate as an added salt. The MS spectra showed only one series of peaks separated exactly by the mass of the IBVE. The observed mass of each peak was in good agreement with the theoretical one, which possesses one initiator fragment at the α end and one methoxy group originated from quenching with methanol at the ω end. Thus, detailed end group analysis is possible for poly(VE). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4023–4031, 2000     

Living cationic polymerization of 2‐adamantyl vinyl ether

Living cationic polymerization of 2‐adamantyl vinyl ether (2‐vinyloxytricyclo[3.3.1.1]^3,7decane; 2‐AdVE) was achieved with the CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride/ethyl acetate [CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5/CH₃COOEt] initiating system in toluene at 0 °C. The number‐average molecular weights (M_n's) of the obtained poly(2‐AdVE)s increased in direct proportion to monomer conversion and produced the polymers with narrow molecular weight distributions (MWDs) (M_w/M_n = ～1.1). When a second monomer feed was added to the almost polymerized reaction mixture, the added monomer was completely consumed and the M_n's of the polymers showed a direct increase against conversion of the added monomer. Block and statistical copolymerization of 2‐AdVE with n‐butyl vinyl ether (CH₂?CH? O? CH₂ CH₂CH₂CH₃; NBVE) were possible via living process based on the same initiating system to give the corresponding copolymers with narrow MWDs. Grass transition temperature (T_g) and thermal decomposition temperature (T_d) of the poly(2‐AdVE) (e.g., M_n = 22,000, M_w/M_n = 1.17) were 178 and 323 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1629–1637, 2008     

Living cationic polymerization of isobutyl vinyl ether using a variety of metal oxides as heterogeneous catalysts: Robust,reusable, and environmentally benign initiating systems

Cationic polymerization of isobutyl vinyl ether (IBVE) was examined using a variety of metal oxides in conjunction with IBVE–HCl adduct as a cationogen in toluene at 0 °C. Iron oxides (α‐Fe₂O₃, γ‐Fe₂O₃, and Fe₃O₄) induced living polymerization in the presence of an added base, ethyl acetate or 1,4‐dioxane, to give polymers with very narrow molecular weight distributions (MWDs). Conversely, with other metal oxides such as Ga₂O₃, In₂O₃, ZnO, Co₃O₄, and Bi₂O₃, polymers with bimodal MWDs, including long‐lived species along with uncontrolled higher molecular weight portions, were produced in the presence of an added base. A small amount of nBu₄NCl or 2,6‐di‐tert‐butylpyridine (DTBP) suppressed the uncontrolled portion to induce controlled reactions with Ga₂O₃, In₂O₃, and ZnO. The roles of these reagents are discussed in terms of the nature of the active sites of the catalyst surface and the polymerization mechanisms. In addition, the reusability of the catalyst, the effect of stirring before and during polymerization, and the estimation of the number of active sites are also described. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 916–926, 2010     

Living cationic polymerization of an azide‐containing vinyl ether toward addressable functionalization of polymers

We first achieved the living cationic polymerization of azide‐containing monomer, 2‐azidoethyl vinyl ether (AzVE), with SnCl₄ as a catalyst (activator) in conjunction with the HCl adduct of a vinyl ether [H‐CH₂CH(OR)‐Cl; R ? CH₂CH₂Cl, CH₂CH(CH₃)₂]. Despite the potentially poisoning azide group, the produced polymers possessed controlled molecular weights and fairly narrow distributions (M_w/M_n ～ 1.2) and gave block polymers with 2‐chloroethyl vinyl ether. The pendent azide groups are easily converted into various functional groups via mild and selective reactions, such as the Staudinger reduction and copper‐catalyzed azide‐alkyne 1,3‐cycloaddition (CuAAC; a “click” reaction). These reactions led to quantitative pendent functionalization into primary amine (? NH₂), hydroxy (? OH), and carboxyl (? COOH) groups, at room temperature and without any acidic or basic treatment. Thus, poly(AzVE) is a versatile precursor for a wide variety of functional vinyl ether polymers with well‐defined structures and molecular weights. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1449–1455, 2010     

Living cationic polymerization of α‐methyl vinyl ethers using SnCl4

Cationic polymerization of α‐methyl vinyl ethers was examined using an IBEA‐Et_1.5AlCl_1.5/SnCl₄ initiating system in toluene in the presence of ethyl acetate at 0 ～ ?78 °C. 2‐Ethylhexyl 2‐propenyl ether (EHPE) had a higher reactivity, compared to corresponding vinyl ethers. But the resulting polymers had low molecular weights at 0 or ?50 °C. In contrast, the polymerization of EHPE at ?78 °C almost quantitatively proceeded, and the number‐average molecular weight (M_n) of the obtained polymers increased in direct proportion to the EHPE conversion with quite narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ≤ 1.05). In monomer‐addition experiments, the M_n of the polymers shifted higher with low polydispersity as the polymerization proceeded, indicative of living polymerization. In the polymerization of methyl 2‐propenyl ether (MPE), the living‐like propagation also occurred under the reaction conditions similar to those for EHPE, but the elimination of the pendant methoxy groups was observed. The introduction of a more stable terminal group, quenched with sodium diethyl malonate, suppressed this decomposition, and the living polymerization proceeded. The glass transition temperature of the obtained poly(MPE) was 34 °C, which is much higher than that of the corresponding poly(vinyl ether). This poly(MPE) had solubility characteristics that differed from those of poly(vinyl ethers). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2202–2211, 2008     

Tetradentate schiff base ligand/MCln initiating systems for the controlled cationic polymerization of isobutyl vinyl ether: Effects of the ligand framework

We investigated the cationic polymerization of vinyl ethers using metal complex catalysts with salen and salphen ligands. Metal complexes were generated in situ from the reaction of a ligand and a metal chloride. The choice of a ligand and a central metal was crucial for tuning the catalyst function such as catalytic activity and controllability of the polymerization. Among metal chlorides employed, ZrCl₄ was the most efficient for controlled polymerization. Cationic polymerization of isobutyl vinyl ether (IBVE) proceeded using the salen and salphen‐type ligand/ZrCl₄ initiating systems, yielding polymers with predetermined molecular weights and narrow molecular weight distributions. Importantly, the structural effects of the complex catalysts were responsible for the polymerization behavior. For example, the polymerization using the salen‐type ligand/ZrCl₄ system was much slower than that using the salphen‐type ligand/ZrCl₄ system. In addition, the polymerization of IBVE using the salen‐type ligand/FeCl₃ system proceeded in a controlled manner, which was in contrast to uncontrolled polymerization using the salphen‐type ligand/FeCl₃ system. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 989–996     

Synthesis of fluorine‐containing star‐shaped poly(vinyl ether)s via arm‐linking reactions in living cationic polymerization

Various types of fluorine‐containing star‐shaped poly(vinyl ether)s were successfully synthesized by crosslinking reactions of living polymers based on living cationic polymerization. Star polymers with fluorinated arm chains were prepared by the reaction between a divinyl ether and living poly(vinyl ether)s with fluorine groups (C₄F₉, C₆F₁₃, and C₈F₁₇) at the side chain using cationogen/Et_1.5AlCl_1.5 in a fluorinated solvent (dichloropentafluoropropanes), giving star‐shaped fluorinated polymers in high yields with a relatively narrow molecular weight distribution. The concentration of living polymers for the crosslinking reaction and the molar feed ratio of a bifunctional vinyl ether to living polymers affected the yield and molecular weight of the star polymers. Star polymers with block arms were prepared by a linking reaction of living block copolymers of a fluorinated segment and a nonfluorinated segment. Heteroarm star‐shaped polymers containing two‐ or three‐arm species were synthesized using a mixture of different living polymer species for the reaction with a bifunctional vinyl ether. The obtained polymers underwent temperature‐induced solubility transitions in various organic solvents, and their concentrated solutions underwent sol–gel transitions, based on the solubility transition of a thermoresponsive fluorinated segment. Furthermore, a slight amount of fluorine groups were shown to be effective for physical gelation when those were located at the arm ends of a star polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cationic polymerization of vinyl ethers with alkyl or ionic side groups in ionic liquids

Controlled cationic polymerization of isobutyl vinyl ether was demonstrated to proceed in an ionic liquid (IL), 1‐butyl‐3‐octylimidazolium bis(trifluoromethanesulfonyl)imide, using a 1‐(isobutoxy)ethyl acetate/TiCl₄ initiating system, ethyl acetate as an added base, and 2,6‐di‐tert‐butylpyridine as a proton trap reagent. Judicious choices of metal halide catalysts, counteranions of ILs, and additives were essential for controlling the polymerization. The polymerization proceeded much faster in the IL than in CH₂Cl₂, indicating an increased population of ionic active species in the IL due to the high polarity. Polymers with a relatively narrow molecular weight distribution were obtained in the IL with a bis(trifluoromethanesulfonyl)imide ( ) anion even in the absence of an added base, which suggested possible interactions of the counteranion of the IL with the growing carbocations. Moreover, the direct cationic polymerization of a vinyl ether with pendant imidazolium salts, 1‐(2‐vinyloxyethyl)‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide, proceeded in a homogeneous state in 1‐methyl‐3‐octylimidazolium bis(trifluoromethanesulfonyl)imide. The solubilities of the obtained polymers were readily tuned by counteranion exchange. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1774–1784     

MALDI‐TOF‐MS analysis of living cationic polymerization of vinyl ethers. III. Polymerization with SnCl4 and TiCl4 in the absence of additives

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analysis revealed that the precision control (or the living nature) of the cationic polymerization of vinyl ethers with SnCl₄ or TiCl₄ critically depends on the Lewis acid concentration and temperature. Specifically, at an extremely low Lewis acid concentration, for example, the polymerization with the HCl–vinyl ether adduct (an initiator) is living at ?78 °C in CH₂Cl₂ solvent, whereas side reactions occurred at a higher concentration of SnCl₄ or at a higher temperature, ?15 °C. This was more pronounced with SnCl₄ than with TiCl₄, which was due to a stronger Lewis acidity of SnCl₄ as suggested by NMR analysis of the model reactions. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1258–1267, 2001     

MALDI‐TOF‐MS analysis of living cationic polymerization of vinyl ethers. II. Living nature of growing end and side reactions

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analysis revealed that the HCl–vinyl ether adduct/SnCl₄/n‐Bu₄NCl initiating system induced living cationic polymerization of isobutyl vinyl ether in CH₂Cl₂ at ?78 °C, that is, the well‐resolved spectra demonstrated that the produced polymers consist of only one series of polymers carrying one initiator fragment at the α end and one methoxy group originated from quenching with methanol at the ω end. The polymer molecular weight as well as the terminal structure were unchanged even when the reaction mixtures were kept unquenched at ?78 °C for an interval of more than five times longer than the reaction period after complete consumption of monomer, which indicates the long lifetime of the living end even under such starved conditions. In contrast, the polymers obtained at a higher temperature, ?15 °C, showed an additional minor series of polymers formed via proton initiation, originating from adventitious water. Under the starved conditions, other side reactions occurred to generate minor series of polymers with an aldehyde ω end or a diisobutyl acetal ω end. Rather surprisingly, however, unsaturated C?C end groups were not detected, which means the absence of β‐proton elimination under these conditions. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1249–1257, 2001