Development of catalyst‐transfer condensation polymerization. Synthesis of π‐conjugated polymers with controlled molecular weight and low polydispersity

We describe the development of chain‐growth condensation polymerization for the synthesis of well‐defined π‐conjugated polymers via a new polymerization mechanism, catalyst‐transfer polymerization. We first studied the condensation polymerization of Grignard‐type hexylthiophene monomer with a Ni catalyst as a part of our research on chain‐growth condensation polymerization, and found that this polymerization also proceeded in a chain‐growth polymerization manner. However, the polymerization mechanism involving the Ni catalyst was different from that of previous chain‐growth condensation polymerizations based on substituent effects; the Ni catalyst catalyzed the coupling reaction of the monomer with the polymer, followed by the transfer of Ni(0) to the terminal C? Br bond of the elongated molecule. This catalyst‐transfer condensation polymerization is generally applicable for the synthesis of polythiophene with an etheric side chain and poly(p‐pheneylene), as well as for the synthesis of polyfluorene via the Pd‐catalyzed Suzuki–Miyaura coupling reaction. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 753–765, 2008     

Investigation of catalyst‐transfer condensation polymerization for the synthesis of n‐type π‐conjugated polymer,poly(2‐dioxaalkylpyridine‐3,6‐diyl)

Kumada‐Tamao coupling polymerization of 6‐bromo‐3‐chloromagnesio‐2‐(3‐(2‐methoxyethoxy)propyl)pyridine 1 with a Ni catalyst and Suzuki‐Miyaura coupling polymerization of boronic ester monomer 2 , which has the same substituted pyridine structure, with ^tBu₃PPd(o‐tolyl)Br were investigated for the synthesis of a well‐defined n‐type π‐conjugated polymer. We first carried out a model reaction of 2,5‐dibromopyridine with 0.5 equivalent of phenylmagnesium chloride in the presence of Ni(dppp)Cl₂ and then observed exclusive formation of 2,5‐diphenylpyridine, indicating that successive coupling reaction took place via intramolecular transfer of Ni(0) catalyst on the pyridine ring. Then, we examined the Kumada‐Tamao polymerization of 1 and found that it proceeded homogeneously to afford soluble, regioregular head‐to‐tail poly(pyridine‐2,5‐diyl), poly(3‐(2‐(2‐(methoxyethoxy)propyl)pyridine) (PMEPPy). However, the molecular weight distribution of the polymers obtained with several Ni and Pd catalysts was very broad, and the matrix‐assisted laser desorption ionization time‐of‐flight mass spectra showed that the polymer had Br/Br and Br/H end groups, implying that the catalyst‐transfer polymerization is accompanied with disproportionation. Suzuki‐Miyaura polymerization of 2 with ^tBu₃PPd(o‐tolyl)Br also afforded PMEPPy with a broad molecular weight distribution, and the tolyl/tolyl‐ended polymer was a major product, again indicating the occurrence of disproportionation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Room temperature suzuki cross‐coupling polymerizations of aryl dihalides and aryldiboronic acid/acid esters with t‐Bu3P‐coordinated 2‐phenylaniline‐based palladacycle complex as the precatalyst

Room temperature Suzuki cross‐coupling polymerization of aryl dibromides/diiodides with aryldiboronic acids/acid esters with t‐Bu₃P‐coordinated 2‐phenylaniline‐based palladacycle complex, [2′‐(amino‐kN)[1,1′‐biphenyl]‐2‐yl‐kC]chloro(tri‐t‐butylphosphine)palladium, as a general precatalyst is described. Such room temperature Suzuki cross‐coupling polymerization is achieved by employing six equivalents or more of the base and affords polymers within an hour, with the yields and the molecular weights in general comparable to or higher than reported results that required higher reaction temperature and/or longer polymerization time. Our study provides a general catalyst system for the room temperature Suzuki cross‐coupling polymerization of aryl dibromides/diiodides with aryldiboronic acids/acid esters and paves the road for the investigation of employing other monodentate ligand‐coordinated palladacycle complexes including other electron‐rich monophosphine‐coordinated ones for room temperature cross‐coupling polymerizations. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1606–1611     

Fabrication of a nanohybrid of conjugated polymer nanoparticles and graphene oxide for biosensing of trypsin

Conjugated polymers containing triphenylamine group are synthesized via Suzuki coupling polymerization. Fluorescent‐conjugated polymer nanoparticles (CPN) are prepared by reprecipitation method using the newly synthesized conjugated polymer. CPN can be encapsulated with polyarginine by electrostatic interaction. The CPN modified with polyarginine exhibit excellent interaction with graphene oxide (GO) which is chemically modified with hydrophilic groups that possesses negative charge, which, in turn, induces the quenching of the fluorescence of CPN upon formation of CPN–GO nanohybrid. Upon exposure to trypsin, the quenched fluorescence is recovered by release of CPN from the nanohybrid, because trypsin cleaves the polyarginine linkage, resulting in weakening of interaction between CPN and GO. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1898–1904     

New conjugated polymers comprising ortho‐phenylazonaphthols: Synthesis and chromogenic behaviors

A new series of poly(ortho‐phenylazonaphthol) derivatives linked with a phenylene or fluorene repeat unit was synthesized using the Suzuki cross‐coupling reaction and characterized. The synthesized polymers can be categorized by their structures, with a free hydroxyl group and with a t‐Boc‐blocked hydroxyl group, which exhibited completely different UV‐vis absorption properties according to the allowed or forbidden tautomerism. In both cases, a pronounced color change to deep violet (bathochromic shift) was induced upon exposure to fluoride anion, presumably because of electron transfer between the hydroxyl group and the fluoride anion. Interestingly, the chromogenic pattern could be produced directly by UV irradiation through a photomask on the flexible nanofiber web electrospun from poly(methyl methacrylate) blended with t‐Boc‐protected Polymer 8 and photoinduced acid generator. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4430–4440, 2007     

Synthesis of chromo‐ and fluorogenic poly(ortho‐diaminophenylene) chemosensors for fluoride anion

Two new poly(ortho‐diaminophenylene) derivatives containing fluorene and/or quinoxaline moieties per repeat unit in the main chain were synthesized via Suzuki coupling reaction followed by reduction process. The synthesized polymers were characterized and explored as colorimetric and fluorometric anion‐sensing materials. The polymers in dilute tetrahydrofuran (THF) solution emitted green light (about 530 nm) in their precursor benzothiadiazole forms and blue to green light (477–523 nm) in their reduced forms. The color of polymer solution was dramatically altered upon addition of fluoride anion without noticeable absorption change in UV–vis spectrum. The fluorescence was ratiometrically quenched with a linear relationship between fluorescence intensity and fluoride anion concentration implying static quenching mechanism could be applied judging from the maintenance of constant fluorescence lifetime with variable fluoride anion concentration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1546–1556, 2007     

Synthesis and characterization of a helical step‐ladder polyarylene

A helical step‐ladder polyarylene incorporating chiral (R)‐2,2′‐dioctoxy‐1,1′‐binaphthyl units was synthesized for the first time. The first step involved the preparation of a precursor poly(arylene ketone) via a palladium‐mediated Suzuki‐type cross‐coupling reaction with the aid of microwave heating. Two polymer‐analog reaction steps, the reduction of the keto groups to tertiary alcohol functionalities and subsequent intramolecular Friedel–Crafts cyclization, gave a step‐ladder polymer ( 6 ) in good yields with reasonable mean average molecular weights greater than 13,000. The regioselective cyclization pattern in the α position of the naphthalene core was confirmed by a comparison of the NMR data of the polymer with those of the corresponding model ladder oligomers, 12 and 13 , and also a single‐crystal structure of 13 . The optical spectra of the oligomers and polymers indicated that there was little electronic interaction across the binaphthyl units. The circular dichroism spectrum of 6 exhibited a strong bisignate Cotton effect in the π–π* absorption region of the planar chromophores, which reflected the strong exciton coupling within the helical polymer chain. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5533–5545, 2006     

Triphenylamine‐based fluorescent conjugated copolymers with pendant terpyridyl ligands as chemosensors for metal ions

Two well‐defined triphenylamine‐based fluorescent conjugated copolymers with pendant terpyridyl ligands were synthesized through Suzuki coupling polymerization and were further characterized by ¹H‐NMR, ¹³C‐NMR, gel permeation chromatography, Infrared, and UV‐vis spectra. Polymer P‐1 , terpyridine‐bearing poly(triphenylamine‐alt‐fluorene) with a high fluorescence quantum yield (62%) shows much higher sensitivities toward Fe³⁺, Ni²⁺, and Cu²⁺ as compared with the other metal ions investigated. Especially, Fe³⁺ can lead to an almost complete fluorescence quenching of polymer P‐1 . Whereas, the analogous polymer P‐2 , in which N‐ethylcarbazole repeat units replace the fluorene units in P‐1 , shows a very poor selectivity. It demonstrates that polymers with a same receptor may show different sensitivity to analytes owing to their different type of backbones. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1310–1316, 2010     

Quenching of metal‐catalyzed living radical polymerization with silyl enol ethers

Various silyl enol ethers were employed as quenchers for the living radical polymerization of methyl methacrylate with the R Cl/RuCl₂(PPh₃)₃/Al(Oi–Pr)₃ initiating system. The most effective quencher was a silyl enol ether with an electron‐donating phenyl group conjugated with its double bond [CH₂C(OSiMe₃)(4‐MeOPh) ( 2a )] that afforded a halogen‐free polymer with a ketone terminal at a high end functionality [F̄_n ∼ 1]. Such silyl compounds reacted with the growing radical generated from the dormant chloride terminal and the ruthenium complex to give the ketone terminal via the release of the silyl group along with the chlorine that originated from the dormant terminal. In contrast, less conjugated silyl enol ethers such as CH₂C(OSiMe₃)Me were less effective in quenching the polymerization. The reactivity of the silyl compounds to the poly(methyl methacrylate) radical can be explained by the reactivity of their double bonds, namely, the monomer reactivity ratios of their model vinyl monomers without the silyloxyl groups. The lifetime of the living polymer terminal was also estimated by the quenching reaction mediated with 2a . © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4735–4748, 2000     

Photopolymerization reactions initiated by a visible light photoinitiating system: Cyanine dye/borate salt/1,3,5‐triazine

New three‐component photoinitiating systems consisting of a cyanine dye, borate salt, and a 1,3,5‐triazine derivative were investigated by measuring their photoinitiation activities and through fluorescence quenching experiments. Polymerization kinetic studies based on the microcalorimetric method revealed a significant increase in polymerization rate when the concentration of n‐butyltriphenylborate salt or the 1,3,5‐triazine derivative were increased. The photo‐induced electron transfer process between electron donor and electron acceptor was studied by means of fluorescence quenching and SrEt change of the fluorescence intensity. The experiments performed documented that an increase of the n‐butyltriphenylborate salt concentration dramatically increases the rate of dye fluorescence quenching, whereas the increasing of the 1,3,5‐triazine derivative concentration slows down the consumption of the dye. We conclude that the primary photochemical reaction involves an electron transfer from the n‐butyltriphenylborate anion to the excited singlet state of the dye, followed by the reaction of the 1,3,5‐triazine derivative with the resulting dye radical to regenerate the original dye. This reaction simultaneously produces a triazinyl radical anion derived from the 1,3,5‐triazine, which undergoes the carbon‐halogen bond cleavage yielding radicals active in initiation of a free radical polymerization chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3626–3636, 2007     

Controlled polymerization of methacrylates at ambient temperature using trithiocarbonate chain transfer agents via SET‐RAFT–cyclohexyl methacrylate: A model study

Controlled radical polymerization of cyclohexyl methacrylate (CHMA), at ambient temperature, using various chain transfer agents (CTAs) is successfully demonstrated via single electron transfer‐radical addition fragmentation chain transfer (SET‐RAFT). Well‐controlled polymerization with narrow molecular weight distribution (M_w/M_n) < 1.25 was achieved. The polymerization rate followed first‐order kinetics with respect to monomer conversion, and the molecular weight of the polymer increased linearly up to high conversion. A novel, fluorescein‐based initiator, a novel fluorescent CTA and two other CTAs comprising of butane thiol trithiocarbonate with cyano (CTA 1) and carboxylic acid (CTA 3) as the end group were synthesized and characterized. The polymerization is observed to be uncontrolled under SET and less controlled under atom transfer radical polymerization (ATRP) condition. CTA 2 and 3 produces better control in propagation compared with CTA 1, which may be attributed to the presence of R group that undergoes ready fragmentation to radicals, at ambient temperature. The poly(cyclohexyl methacrylate) [P(CHMA)] prepared through ATRP have higher fluorescence intensity compared with those from SET‐RAFT, which may be attributed to the quenching of fluorescence by the trithiocarbonate and the long hydrocarbon chain. It is observed that block copolymers P(CHMA‐b‐t‐BMA) produced from P(CHMA) macroinitiators synthesized via SET‐RAFT result in lower polydispersity index in comparison with those synthesized via ATRP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of Poly(Arylene Alkenylene)s by Pd‐Catalyzed Three‐Component Coupling Polycondensation of Diiodoarenes,Non‐Conjugated Dienes,and Nucleophiles that Involves Chain Walking Isomerization

The Pd‐catalyzed three‐component coupling polycondensation of diiodoarenes, nonconjugated dienes, and carbonucleophiles afforded poly(arylene alkenylene)s with moderate molecular weight in good yield. The reaction involves Mizoroki‐Heck coupling, olefin migration via chain walking, and addition of the carbonucleophile to the resulting π‐allylpalladium species. The polymerization with a slight excess of nucleophile with respect to diiodoarene also proceeded to give the polymer without significant decrease in molecular weight in spite of the nonstoichiometric mixture of the monomers. The Pd‐catalyzed three‐component coupling polycondensation of diiodoarenes, nonconjugated dienes, and diimide also proceeded. The base used in the reaction is critical for yield and molecular weight of the product. The reaction using NaHCO₃ afforded the product with low solubility, which can be explained by the high molecular weight of the polymer and/or the strong interaction of the electron donating dimethoxyphenylene groups and electron accepting diimide groups in the polymer. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2535–2542     

Facile synthesis of well‐defined pH‐liable Schiff‐base‐type photosensitive polymers via visible‐light‐activated ambient temperature RAFT polymerization

Inspired by the structure character and photosensitive molecular mechanism of natural rhodopsin or bacteriorhodopsin, a novel pH‐liable photosensitive polymer whose chromophores directly bind with Schiff base linkages was designed. Accordingly, 2‐((3‐phenylallylidene)amino)ethyl methacrylate (PAAEMA), 2‐((3‐(4‐fluorophenyl)allylidene)amino)ethyl methacrylate (FPAAEMA), and 2‐((3‐(4‐methoxyphenyl)allylidene)amino)ethyl methacrylate (MPAAEMA) monomers were synthesized. These monomers were polymerized upon irradiating with mild visible light at ambient temperature. The results indicate that Schiff base linkages of these monomers are stable under such mild polymerizing conditions, and the weak absorption of dithioester functionalities in the visible wave range leads to a rapid and well‐controlled RAFT polymerization. The polymerization rate slows down but initialization period significantly shortens on increasing the feed molar ratio of monomer. The pendant electron‐withdrawing‐group‐substituted chromophore improves the reactivity of monomer, but electron‐donating‐group‐substituted chromophore significantly inactivates monomer. Glycidyl methacrylate (GMA) may well incorporate in this polymer via RAFT random copolymerization of PAAEMA and GMA monomers due to the comparable reactivity ratios of this monomer pair. PolyMPAAEMA exhibits reversible fluorescence emitting or quenching upon deprotonating or protonating the Schiff base linkages. This fluorescence behavior may be of interest in the fabrication of pH‐responsive photosensors, light modulators, or actuators. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6668–6681, 2009     

Thienoisoindigo‐based small molecules and narrow bandgap polymers synthesized via C–H direct arylation coupling

Thienoisoindigo (TIIG) has emerged as an attractive building block for high‐performance organic optoelectronic devices. Here we report the first synthesis of a series of π‐conjugated TIIG‐based small molecules and alternating copolymers via direct C–H arylation, which enables the efficient synthesis without use of flammable and toxic orgametallic reagents in fewer steps compared Suzuki and Stille coupling. The direct arylation coupling between TIIG and two respective mono‐bromo aryl reactants clearly shows that the α‐H is more reactive than the β‐H in the thiophene unit of TIIG. The high regioselectivity of TIIG monomer warrants the successful synthesis of high‐quality alternating copolymers with minimal structural defects. PTIIG‐BT polymer synthesized via direct arylation polymerization (DAP) showed comparable molecular weight and hole mobility than the same polymer previously synthesized via Suzuki coupling. Moreover, the two new polymers (PTIIG‐TF and PTIIG‐2FBT) synthesized via DAP showed hole mobility up to 10^?3 cm² V^?1 s^?1 in FET devices fabricated and tested under ambient conditions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2015–2031     

Synthesis and characterization of soluble low‐bandgap oligothiophene‐[all]‐S,S‐dioxides‐based conjugated oligomers and polymers

The synthesis and characterization of a new family of soluble oligothiophene‐S,S‐dioxides and their use as building blocks to form polythiophene‐S,S‐dioxides via microwave‐assisted Stille coupling polymerization are described. Incorporation of the sulfone group into the polythiophene backbone leads to narrowing of the polymer bandgap, and while the energies of both Frontier orbitals in polythiophene‐S,S‐dioxide are lower with respect to polythiophenes, this tendency is considerably stronger for the lowest unoccupied molecular orbital than for the highest occupied molecular orbital, resulting in greater electron‐accepting ability. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of methyl‐substituted azobenzene–carbazole conjugated copolymers with photoinduced structural changes

Azobenzene switches its structure instantaneously by reversible trans‐to‐cis and cis‐to‐trans photoisomerization with light irradiations. Dynamic change in polymer structure is expected via introducing an azobenzene unit into the main chain. In this study, a set of methyl‐substituted azobenzene–carbazole conjugated copolymers is synthesized by the Suzuki–Miyaura coupling method. Introduction of methyl substituents to the azobenzene unit of the monomer, and polymerization in a high‐boiling solvent improve the molecular weight of the polymer. Decrease of effective conjugation length due to the twisted structure of the main chain allows progress of photoisomerization. The microstructure of the polymer was determined with grazing incidence X‐ray diffraction (GIXD) measurements using synchrotron radiation. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1756–1764     

Modulating the Properties of Azulene‐containing Polymers Through Functionalization at the 2‐Position of Azulene

Poly(2‐arylazulene‐alt‐fluorene) and poly(2‐arylazulene‐alt‐thiophene) are synthesized via Suzuki and Stille cross‐coupling polymerization, respectively, using 1,3‐dibromo‐2‐arylazulenes as monomers, which are prepared by a novel directed C?H activation method of 2‐carboxylic azulene and subsequent bromination reaction. Our study shows that functionalization at the 2‐position of azulene monomers influences polymer properties. For instance, different from electron‐withdrawing groups that discourage the protonation of azulene, electron‐donating aryl groups, however, enhances the sensitivity of response to acid. Protonation of the polymers leads to significant shifts in absorption spectra accompanying with obvious color changes from green to brown in majority cases because of the formation of poly(azulenium cation). The electrochromic properties of polymers are examined, exhibiting that nature of aryl group at the 2‐position of azulene influences the stability of their electrochromic devices.     

Synthesis and reaction of β‐hydroxyaspartic acid‐based polymethacrylate

O‐Methacryloyl‐N‐(tert‐butoxycarbonyl)‐β‐hydroxyaspartic acid dimethyl ester was synthesized by methyl esterification of β‐hydroxyaspartic acid, followed by protection of the amino group with the tert‐butoxycarbonyl group and then the reaction of the hydroxyl group with methacryloyl chloride. The monomer efficiently underwent radical polymerization to afford the corresponding polymer with a number‐average molecular weight of 42,000 in good yields. The alkaline hydrolysis of the polymer occurred not only at the methyl ester but also at the ester moiety between the main and side chains of the polymer. The methyl ester‐free polymer gradually released β‐hydroxyaspartic acid moiety in a phosphate buffer solution with pH = 7.3 and 7.8. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2782–2788, 2002     

Synthesis of molecular‐weight‐controlled polyfluorene with boronate at one end

We investigated the synthesis of polyfluorene with a pinacol boronate (PinB) moiety at one end and with controlled molecular weight by means of Suzuki–Miyaura coupling polymerization of pinacol (7‐bromo‐9,9‐dioctyl‐9H‐fluoren‐2‐yl)boronate ( 1 ) with a palladium(0) precatalyst in the presence of pinacol 4‐trifluoromethylphenylboronate ( 2 ) as a chain terminator and CsF/18‐crown‐6 as a base. When we used AmPhos Pd G2, which has a propensity for intramolecular catalyst transfer on a π‐electron face, polyfluorene with the PinB moiety at one end and PhCF₃ (derived from 2 ) at the other end was obtained, and the molecular weight increased in proportion to the feed ratio of [ 1 ]₀/[catalyst]₀, though the molecular weight distribution was broad. Since the molecular weight also linearly increased with respect to the conversion of 1 until the middle stage of polymerization, the polymerization appears to involve chain‐growth polymerization through intramolecular catalyst transfer from the Pd catalyst inserted into the C? Br bond of 1 . The broad molecular weight distribution might be mainly due to slow initiation and slow termination with 2 , rather than polymer–polymer coupling. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2498–2504     

Synthesis and characterization of poly(fluorene‐co‐alt‐phenylene) containing 1,3,4‐oxadiazole dendritic pendants

A series of poly(fluorene‐co‐alt‐phenylene)s containing various generations of dendritic oxadiazole (OXD) pendent wedges were synthesized by the Suzuki polycondensation of OXD‐functionalized 1,4‐dibromophenylene with 9,9‐dihexylfluorene‐2,7‐diboronic ester. The obtained polymers possessed excellent solubility in common solvents and good thermal stability. Photophysical studies showed that the dendronized polymers appended with higher generations of OXD dendrons exhibited enhanced photoluminescence efficiencies and narrower values of the full width at half‐maximum. This was attributed to the shielding effect induced by the bulky dendritic OXD side chains, which prevented self‐quenching and suppressed the formation of aggregates/excimers. The energy transfer from the OXD dendrons to the polymer backbones was very efficient when excitation of the peripheral OXD dendrons resulted mainly in the polymer backbone emission alone. In particular, the photoluminescence emission intensities by the sensitized excitations of OXD dendrons in solid films of the polymers were all stronger than those by the direct excitations of their polymer conjugated backbones. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6765–6774, 2006