Collapse and swelling of poly(N‐isopropylacrylamide‐co‐sodium acrylate) copolymer brushes grafted on a flat SiO2 surface

Poly(N‐isopropylacrylamide‐co‐sodium acrylate) copolymer brushes grafted on SiO₂‐coated quartz crystal surface were prepared with a surface‐immobilized initiator. The collapse and swelling of the thermally sensitive copolymer brushes in water were studied with quartz crystal microbalance in situ. The frequency and dissipation changes with the temperature increasing in the range 20–38 °C indicate that the brushes undergo a continuous collapse transition. Our results show that the copolymer brushes collapse to a state where the brushes were prepared. A hysteresis was observed in the cooling process. Fourier transform infrared (FTIR) results revealed that the formation of some additional hydrogen bonds within the copolymer chains at their collapsed state is responsible for the hysteresis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 770–778, 2006     

Growth of polystyrene films via gas‐phase polymerization with [Pd(CH3CN)4][BF4]2 thin film catalyst

The heterogeneous catalytic polymerization of styrene vapor with a tetrakis(acetonitrile)palladium(II) tetrafluoroborate, [Pd(CH₃CN)₄][BF₄]₂, thin film has been demonstrated. The catalyst is deposited by nebulization of dilute solutions onto a quartz crystal microbalance (QCM) and then exposed to styrene vapor in controlled environments. The use of QCM allows in situ monitoring of catalyst deposition and polymer growth kinetics. The polymerization process appears to involve the entire catalyst film rather than polymerization only at the catalyst film surface. The styrene vapor polymerization occurs rapidly after a short induction time needed for monomer dissolution and catalyst activation. The narrow molecular weight distribution of the produced polymer suggests that the deposited film acts as a single site catalyst. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1930–1934, 2005     

Use of the quartz crystal microbalance for kinetic studies of thermal decomposition of solids

A quartz crystal microbalance has been proposed for studies on the temperature dependence of the linear rate of a reaction interface advance in topochemical reactions of the thermal decomposition of solids. A quartz crystal microbalance has been used in investigations of the CuSO₄ · 5H₂O dehydration. The data agree fairly well with those available in the literature. Advantages and disadvantages of the method proposed are discussed.     

Electrochemical polymerization of aniline in the SDS/n‐C5H11OH/H2SO4(aq) lyotropic liquid crystal

Electrochemical polymerization of aniline was performed by the method of ultramicroelectrode cyclic voltammetry in the lamellar liquid crystal and hexagonal liquid crystal of SDS/n‐C₅H₁₁OH/H₂SO₄(aq) system. The results indicate that the electrochemical polymerization of aniline can be catalyzed by the SDS/n‐C₅H₁₁OH/H₂SO₄(aq) lyotropic liquid crystal. The polymerization potential of aniline is smaller in the lyotropic liquid crystal system than that in the 0.10 mol L?1 sulfuric acid solution. The catalytic efficiency and polymerization rate of aniline increase with the n‐pentanol content, but decrease with the increase of the SDS content or [PhNH₂/H₂SO₄(aq)] content. Moreover, the catalytic efficiency of the lamellar liquid crystal exceeds that of the hexagonal liquid crystal in the SDS/n‐C₅H₁₁OH/H₂SO₄(aq) system. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2388–2394, 2006     

GaPO4 high temperature crystal microbalance demonstration up to 720°C

Quartz-homeotypic gallium (ortho-) phosphate, GaPO₄, is of special interest for resonator applications asking for temperature compensated cuts with higher electro-mechanical coupling than quartz and operational temperatures up to 970°C. The crystal microbalance technique, well known for quartz (QCM) which can be used only at moderate temperatures, can now be extended to much higher temperatures using GaPO₄ crystals, benefiting from all three advantages mentioned above. Two different experiments were done to demonstrate the advantages of a crystal microbalance based on GaPO₄. First, the GaPO₄ resonator was used for film thickness determination and compared with a commercial QCM. This experiment demonstrated that the measuring range can be extended by using GaPO₄ resonators instead of quartz. The second experiment demonstrates the possibility for thermogravimetric analysis up to 720°C by using a new concept for resonator mounting.This revised version was published online in November 2005 with corrections to the Cover Date.     

Fluorous solvent‐soluble imaging materials containing anthracene moieties

Highly fluorinated photoresist polymers that can undergo photodimerization reactions were designed using an anthracene‐based monomer. Through the random radical copolymerizations of 6‐(anthracen‐9‐yl)hexyl methacrylate ( AHMA ) and semiperfluorodecyl methacrylate ( FDMA ) with four different compositions, polymers with M_n = 20,000–27,000 (M_w/M_n = 2.0–2.9) were prepared in benzotrifluoride. The polymers, in particular fluorous solvent‐soluble imaging material‐2 ( FSIM‐2 ), showed sufficient solubility in fluorous solvents, including hydrofluoroethers, but were rendered insoluble by UV exposure (365 nm). This photochemical solubility change was evaluated quantitatively by a quartz crystal microbalance technique, along with tracing the chemical reaction by UV–vis spectroscopy. Finally, FSIM‐2 and fluorous solvents were applied to the photolithographic patterning of organic light‐emitting diode pixels. In the patterning protocol involving the lift‐off of resist films in fluorous solvents, FSIM‐2 was recognized as a promising photoreactive material when compared with a reference polymer P(FDMA‐MAMA) , which necessitates acidolysis reactions for lithographic imaging. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1252–1259     

Synthesis and properties of amphiphilic and biodegradable poly(ε‐caprolactone‐co‐glycidol) copolymers

We have synthesized poly(ε‐caprolactone‐co‐tert‐butyl glycidyl ether) (CL‐co‐BGE) statistical copolymers using 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis [tris(dimethylamino)phophoranylidenamino]‐2Λ5,4Λ5‐catenadi(phosphazene) (t‐BuP₄) as the catalyst. The hydrolysis of the resulting polymers yields amphiphilic poly(ε‐caprolactone‐co‐glycidol) (CL‐co‐GD) copolymers. By use of the quartz crystal microbalance with dissipation (QCM‐D), we have investigated the enzymatic degradation of the copolymers. It is shown that the degradation rate increases with the content of hydrophilic (GD) units. (3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide) (MTT) assay experiments demonstrate that the CL‐co‐GD copolymers have low cytotoxicity. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 846–853     

QCM-DNA biosensor based on plasma modified PT/TiO2 nanocomposites

A quartz crystal microbalance DNA biosensor based on plasma prepared polythiophene /titanium dioxide (PT/TiO₂) nanocomposite was developed for the detection of genetically modified organisms (GMOs). DNA hybridization was studied by quartz crystal microbalance (QCM) and cyclic voltammetry (CV) measurements. Single stranded DNA probes were immobilized on the PT/TiO₂ coated quartz crystal electrode and the hybridization between the immobilized probe and the target complementary sequence in solution was monitored. The developed QCM-DNA biosensor represented promising results for a real-time, label-free, direct detection of DNA samples for the screening of genetically modified organisms.     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

Validation of quartz crystal rheometry in the megahertz frequency regime

The utility of the quartz crystal microbalance (QCM) as a high‐frequency rheometer operating at 15 MHz was demonstrated. High‐frequency data obtained from a series of rubbery materials were compared with results obtained from traditional dynamic mechanical analysis (DMA) at much lower frequencies. The high‐frequency data enable meaningful shift factors to be obtained at temperatures much further above glass‐transition temperature (T _g) than would otherwise be possible, giving a more complete picture of the temperature dependence of the viscoelastic properties. The QCM can also be used to quantify mass uptake and changes in viscoelastic properties during sample oxidation. The viscoelastic response spanning the full range of behaviors from the rubber to glassy regimes was found to fit well with a six‐element model consisting of three power‐law springpot elements. One of these elements is particularly sensitive to the behavior in the transition regime where the phase angle is maximized. The value of this quantity is obtained from the maximum phase angle, which can be obtained from a temperature sweep at fixed frequency, proving a means for more detailed frequency‐dependent rheometric information to be obtained from a fixed‐frequency measurement at a range of temperatures. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1246–1254     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures

The sorption of carbon dioxide in poly(lactic acid) (PLA) was studied by quartz crystal microbalance at high pressures. To address the effect of the D isomer present in the polymer on the gas sorption, measurements were performed in PLA with two different L:D contents, 80:20 and 98:2. New data for the solubility of carbon dioxide in PLA 80:20 and PLA 98:2 over a temperature range from 303.2 to 323.2 K and up to 5 MPa are presented. The results obtained were correlated with the dual‐mode sorption model and the Flory‐Huggins equation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1010–1019, 2006     

Crystal growth rate in ultrathin films of poly(ethylene oxide)

Many dynamical properties of polymers, including segmental relaxation and chain diffusion, exhibit anomalies in thin‐film samples. We extend the studies of thin‐film dynamics to the case of semicrystalline polymers and present a study of the crystal growth rate for thin films of poly(ethylene oxide). We used optical microscopy and quartz crystal microbalance techniques to characterize the kinetics of crystallization for films with thicknesses from 40 to 1000 nm for a range of temperatures near the melting point. A remarkable slowing down of the crystal growth is observed at all temperatures studied for films with a thickness of less than ～100 nm. The results can be used to suggest reductions of the mobility of chains at the crystal/amorphous interface. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2615–2621, 2001     

Protecting‐group‐free synthesis of glycopolymers bearing thioglycosides via one‐pot monomer synthesis from free saccharides

Polyacrylamides having pendant thioglycosides were successfully synthesized from thioglycosidic monomers that were readily prepared by one‐pot method without any protection of the hydroxy groups on the starting free saccharides. The glycomonomers were synthesized by the direct synthesis of thioglycosides using 2‐chloro‐1,3‐dimethylimidazolinium chloride and 4‐aminobenzentiol, and the following acrylamidation. They were co‐polymerized with acrylamide into glycopolymers by reversible addition‐fragmentation chain transfer polymerization using a trithiocarbonate derivative as a chain transfer agent. The gold nanoparticles and gold‐coated quartz crystal microbalance sensor immobilized with the thiol‐terminated glycopolymers exhibited high affinity for the corresponding lectins due to multivalent interaction between saccharides and protein in aqueous solution. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3513–3520     

Errors induced in quartz crystal mass uptake measurements by nongravimetric effects: Considerations beyond the EerNisse caution

We report frequency changes in AT‐cut quartz crystals for glassy polymers subsequent to temperature and carbon dioxide pressure changes. Anomalous frequency shifts are observed for the crystal subsequent to such changes. Since, the Sauerbrey equation has been applied routinely for mass uptake measurements in glassy polymers, using the quartz crystal microbalance fitted with AT‐cut quartz crystals, it is important that nongravimetric effects that impact the frequency change be well understood. In the present work, we provide a quantitative analysis of the breakdown of the Sauerbrey equation for viscoelastic materials by using the Johannsmann (Macromol Chem Phys 1999, 200, 501) treatment of the response of AT‐cut crystals. Clearly, there exist significant errors in mass uptake measurements for materials deposited on AT‐cut quartz crystals when precautions pertaining to film thickness and viscoelastic compliance are ignored. We show that while the early caution of EerNisse on stress effects in AT‐cut quartz crystals can be important in mass uptake measurements, for polymers, the major source of error arises from viscoelastic effects in the coating. We conclude that mass uptake measurements for films of compliant materials and polymers above their glass transition cannot be performed with accuracy, using AT‐cut quartz crystals if the results are not corrected for frequency shifts due to viscoelastic effects of the overlayer unless the films are extremely thin, that is, less than 100 nm. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 801–814, 2006     

Piezoelectric Detection of Ricin and Affinity-Purified Goat Anti-ricin Antibody

Abstract

Detection of ricin, in a piezoelectric quartz crystal microbalance format, can be accomplished with the use of capture antibody techniques. These techniques allow for the specific attachment of ricin to immobilized capture antibodies on the quartz crystal transducer area. A reversed format can also be used to detect antibody in solution. In this case, the antigen is immobilized and antibody attaches specifically, thus increasing the overall mass and decreasing the resonant frequency. In this report we describe detection of both ricin and anti-ricin antibody using immunological piezoelectric quartz crystal microbalance techniques.

     

Glassy polymer‐sorption phenomena measured with a quartz crystal microbalance technique

The quartz crystal microbalance (QCM) method is applied to the measurement of CO₂ sorption in glassy poly(ethylene terephthalate) (PET), poly(methyl methacrylate), and polysulfone. Polymer thin films in the thickness range of 350–550 nm are prepared by spin‐casting onto the quartz crystal devices. Sorption isotherms at temperatures below the glass transition are analyzed with the dual‐mode sorption model. As‐cast, quenched, and slow‐cooled thermal‐conditioning protocols yield consistent trends in the sorption level, namely, as‐cast > quenched > slow‐cooled. The sorption levels and model results for the quenched‐conditioned samples measured with QCM compare favorably with those reported from the pressure‐decay and gravimetric methods on thick films. With extended analysis of PET, the QCM technique is also useful for the exploration of the temperature dependence associated with gas sorption in glassy polymer systems. Measured heats of sorption and the collapse of the Langmuir component near the PET glass‐transition temperature agree with those reported previously. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2109–2118, 2003     

Biotin functionalized poly(sulfonic acid)s for bioconjugation: In situ binding monitoring by QCM‐D

We describe the synthesis of biotin end functionalized poly(sulfonic acid)s via living radical polymerization (LRP) for conjugation to Avidin. Quartz crystal microbalance (QCM‐D) and competitive binding studies were used to confirm this conjugation. A biotin initiator for copper‐mediated LRP was used to provide acrylamide and methacrylate based polymers with the functional end group. This investigation revealed that 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid was not a suitable monomer in its acid form but was successfully used in its sodium salt form. A second monomer, 3‐sulfopropylmethacrylate as the potassium salt was also studied and both monomers produced polymers with polydispersities <1.3 and 1.4, respectively. Evolution of molecular weight with respect to time indicated that the polymerization of the acrylamide polymer is controlled. Quartz crystal microbalance with dissipation monitoring was used to confirm that the biotinylated polymers were able to bind to Avidin in situ. The gold surface of a quartz crystal was chemically modified resulting in a stable monolayer of Avidin; the biotinylated polymers were passed over the functionalized surface and their grafting ability was examined. A competitive binding evaluation was undertaken with 2‐(4‐hydroxyphenylazo)benzoic acid (HABA) dye to provide visual verification of conjugation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Cyclic voltammetric generation and electrochemical quartz crystal microbalance characterization of passive layer of nickel in a weakly acid medium

The electrochemical quartz crystal microbalance results show that nickel electrodissolution and nickel passivation occur simultaneously. Besides, the anodic transferred charge decreases and the passive layer thickness increases with the number of successive voltammetric cycles. Mass balances across the metal/passive layer/solution have been done from the instantaneous F(dm/dQ) function. A dynamic process for generation of an inner NiO and a Ni(OH)₂ outer passive layers is suggested.     

Determination of E. coli by a Graphene Oxide-Modified Quartz Crystal Microbalance

A biosensor for the determination of Escherichia coli using graphene oxide on the crystal (gold) surface was fabricated by the drop cast method. The E. coli sensing characteristics of the biosensor, such as a change in frequency, were examined by exposing the graphene oxide-coated crystal to various functionalization steps at room temperature. Graphene oxide was functionalized by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride–N-hydroxysuccinimide to covalently conjugate β-galactosidase antibodies to recognize microorganisms that produce this material. Frequency changes in the quartz crystal microbalance are dependent on the absorbed/desorbed masses of the analytes on the functional surface of the crystal. In addition, various characterization techniques were optimized for the morphological elemental analysis of the nanocoating that included field emission scanning electron microscopy, scanning electron microscopy, and electron diffraction spectroscopy. This surface was used in a quartz crystal microbalance nanoplatform for the rapid, sensitive, and label-free detection of E. coli. Under optimal conditions, the frequency of quartz crystal microbalance biosensor was directly proportional to the concentration of antigen with a dynamic range from 0.5?mg?mL^?1 to 5?ng?mL^?1 and a minimum detection limit of 5?ng?mL^?1, and a sensitivity of 0.037?Hz?g?ml^?1?cm^?1. These results show that the graphene oxide-coated crystal had excellent performance for E. coli. This research reports a simple, inexpensive, and effective highly stable biosensor using graphene oxide as the sensing medium.     

The electrocatalytic reactions of adenine, guanine, H2O, H2O2, N2H4, and l -cysteine catalyzed by poly(Ni(4-TMPyP)) film-modified electrodes

Electrochemical preparation of poly(nickel tetrakis(N-methyl-4-pyridyl)porphyrin) tetratosylate (poly-Ni(4-TMPyP)) produces stable and electrochemically active films in strong and weak basic aqueous solutions. These films were produced on glassy carbon and gold electrodes. The electrochemical quartz crystal microbalance and cyclic voltammetry were used to study the in situ growth of poly(Ni(4-TMPyP)) films. The electrochemical properties of poly(Ni(4-TMPyP)) films indicate that the redox process was confined in to the immobilized film. The electrochemical quartz crystal microbalance results showed an ion exchange reaction for the redox couple. The polymer films showed one new redox couple when transferred to strong and weak basic aqueous solutions and the formal potential was found to be pH dependent. The electrocatalytic oxidation of H₂O by a nickel tetrakis(N-methyl-4-pyridyl)porphyrin film-modified electrode was also performed. The mechanism of oxygen evolution was determined by cyclic voltammetry, chronoamperometry and rotating ring disc electrode methods. The oxygen evolution was determined by a bicatalyst system using hemoglobin, and iron tetrakis (N-methyl-2-pyridyl)porphyrin as catalyst to detect the oxygen by electrocatalytic reduction. The electrocatalytic oxidations of adenine, guanine, H₂O₂, N₂H₄, NH₂OH, and l-cysteine by the film-modified electrode obtained from water-soluble nickel porphyrin were also investigated.