首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
《Electroanalysis》2003,15(21):1667-1676
Electrochemical techniques and lateral friction microscopy (LFM) are exploited to characterize the deposition of gold metal particles onto the 3‐dimensional (3‐D) polypyrrole (PPy) film deposited on 2‐dimensional (2‐D) highly oriented pyrolytic graphite (HOPG) substrate surface in an aqueous solution involving 0.01 M pyrrole and 0.1 M LiClO4? 3H2O. Cyclic voltammetry is utilized to find the gold deposition potential onto the PPy film from 0.001 M KAu(CN)2/KOH solution. The gold deposition potential is found to be in the range of ?1.2 V to ?1.4 V. Chronoamperometry is used to find out the nucleation and growth mechanism of gold metal particles onto PPy film. When the PPy film is thin, the mechanism follows the 3‐D instantaneous and moved towards 3‐D progressive as the film thickness increases. Considering the high resistance of thick PPy film and insulating and compact nature of the film at more cathodic potentials, it is suggested that the gold nuclei are formed first on the HOPG substrate surface, move to the PPy film surface and then distributed inside the PPy matrix. Since the friction of gold and the PPy film is different, the LFM is found to be an effective tool to see the distribution of gold particles in the domain boundaries of the PPy film.  相似文献   

2.
In this work, an electrochemical DNA biosensor, based on a dual signal amplified strategy by employing a polyaniline film and gold nanoparticles as a sensor platform and enzyme‐linked as a label, for sensitive detection is presented. Firstly, polyaniline film and gold nanoparticles were progressively grown on graphite screen‐printed electrode surface via electropolymerization and electrochemical deposition, respectively. The sensor was characterized by scanning electron microscopy (SEM), cyclic voltammetry and impedance measurements. The polyaniline‐gold nanocomposite modified electrodes were firstly modified with a mixed monolayer of a 17‐mer thiol‐tethered DNA probe and a spacer thiol, 6‐mercapto‐1‐hexanol (MCH). An enzyme‐amplified detection scheme, based on the coupling of a streptavidin‐alkaline phosphatase conjugate and biotinylated target sequences was then applied. The enzyme catalyzed the hydrolysis of the electroinactive α‐naphthyl phosphate to α‐naphthol; this product is electroactive and has been detected by means of differential pulse voltammetry. In this way, the sensor coupled the unique electrical properties of polyaniline and gold nanoparticles (high surface area, fast heterogeneous electron transfer, chemical stability, and ease of miniaturisation) and enzymatic amplification. A linear response was obtained over a concentration range (0.2–10 nM). A detection limit of 0.1 nM was achieved.  相似文献   

3.
Glutathione‐decorated 5 nm gold nanoparticles (AuNPs) and oppositely charged poly(allylamine hydrochloride) (PAH) were assembled into {PAH/AuNP}n films fabricated layer‐by‐layer (LbL) on pyrolytic graphite (PG) electrodes. These AuNP/polyion films utilized the AuNPs as electron hopping relays to achieve direct electron transfer between underlying electrodes and redox proteins on the outer film surface across unprecedented distances >100 nm for the first time. As film thickness increased, voltammetric peak currents for surface myoglobin (Mb) on these films decreased but the electron transfer rate was relatively constant, consistent with a AuNP‐mediated electron hopping mechanism.  相似文献   

4.
Molecular dynamics simulations are performed on the atomic origin of the growth process of graphite‐like carbon film on silicon substrate. The microstructure, mass density, and internal stress of as‐deposited films are investigated systematically. A strong energy dependence of microstructure and stress is revealed by varying the impact energy of the incident atoms (in the range 1–120 eV). As the impact energy is increased, the film internal stress converts from tensile stress to compressive stress, which is in agreement with the experimental results, and the bonding of C‐Si in the film is also increased for more substrate atoms are sputtered into the grown film. At the incident energy 40 eV, a densification of the deposited material is observed and the properties such as density, sp3 fraction, and compressive stress all reach their maximums. In addition, the effect of impact energy on the surface roughness is also studied. The surface morphology of the film exhibits different characteristics with different incident energy. When the energy is low (<40 eV), the surface roughness is reduced with the increasing of incident energy, and it reaches the minimum at 50 eV. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

5.
Research on the supramolecular self‐assembly behavior at interfaces is of great importance to improving the performance of nanodevices that are based on optical functional materials. In this Minireview, several photoinduced isomerization and polymerization reactions in self‐assembled organic monolayers on surfaces are discussed. Typical organic molecules contain azobenzene, alkynyl, or olefins groups. The feature surface base is a highly oriented pyrolytic graphite (HOPG) surface or a gold surface. Scanning tunneling microscopy (STM) is used as a strong tool to characterize new species’ structures before and after illumination.  相似文献   

6.
Silver nanocrystals, self-organized in compact hexagonal networks, on gold and graphite exhibit anisotropic optical properties. From polarized electron photoemission spectroscopy, a two-photon mechanism is demonstrated and an enhancement due to the surface plasmon resonance (SPR) of the nanocrystal film is observed. Two SPR peaks appear, due to dipolar interactions and induced by the self-organization of silver nanocrystals. This property is used to probe the substrate effect on the plasmon resonance. Its damping is related to particle–substrate interactions.  相似文献   

7.
1,3-Butadiyne was epitaxially polymerized on the graphite basal plane by chemical vapor deposition to form a homogeneous thin film. The film thickness varied from 100 to 3000 Å depending on the polymerization condition. The films on the graphite showed a variety of interference colors such as blue, purple, or gold depending on the film thickness. Raman spectra revealed that the polymerized film was mainly composed of ? C?C? bonds. Electron diffraction pattern and the ESCA spectrum of the film were quite similar to those of graphite, suggesting that butadiyne was polymerized in an epitaxial manner.  相似文献   

8.
The choice of solvent is quite important to obtain good protecting surface film on graphite negative electrodes in rechargeable lithium batteries. A subtle difference of the molecular structure of solvent greatly affects the easiness of surface film formation. In order to understand the solvent effects and to elucidate the mechanism of surface film formation, morphology changes of the basal plane of highly oriented pyrolytic graphite were studied using electrochemical scanning tunneling microscopy (EC‐STM). In this article, our recent results of EC‐STM observation in different solvent systems are reviewed.  相似文献   

9.
The activation characteristics and the effects of current densities on the formation of a separate LiCoO2 and graphite electrode were investigated and the behavior also was compared with that of the full LiCoO2/graphite batteries using various electrochemical techniques. The results showed that the formation current densities obviously influenced the electrochemical impedance spectrum of Li/graphite, LiCoO2/Li, and LiCoO2/graphite cells. The electrolyte was reduced on the surface of graphite anode between 2.5 and 3.6 V to form a preliminary solid electrolyte interphase (SEI) film of anode during the formation of the LiCoO2/graphite batteries. The electrolyte was oxidized from 3.95 V vs Li+/Li on the surface of LiCoO2 to form a SEI film of cathode. A highly conducting SEI film could be formed gradually on the surface of graphite anode, whereas the SEI film of LiCoO2 cathode had high resistance. The LiCoO2 cathode could be activated completely at the first cycle, while the activation of the graphite anode needed several cycles. The columbic efficiency of the first cycle increased, but that of the second decreased with the increase in the formation current of LiCoO2/graphite batteries. The formation current influenced the cycling performance of batteries, especially the high-temperature cycling performance. Therefore, the batteries should be activated with proper current densities to ensure an excellent formation of SEI film on the anode surface.  相似文献   

10.
The preparation of gas diffusion electrodes and their use in an amperometric enzyme biosensor for the direct detection of a gaseous analyte is described. The gas diffusion electrodes are prepared by covering a PTFE membrane (thickness 250 μm, pore size 2 μm, porosity 35%) with gold, platinum, or a graphite/PTFE mixture. Gold and platinum are deposited by e‐beam sputtering, whereas the graphite/PTFE layer is prepared by vacuum filtration of a respective aqueous suspension. These gas diffusion electrodes are exemplarily implemented as working electrodes in an amperometric biosensor for gaseous formaldehyde containing NAD‐dependent formaldehyde dehydrogenase from P. putida [EC. 1.2.1.46] as enzyme and 1,2‐naphthoquinone‐4‐sulfonic acid as electrochemical mediator. The resulting sensors are compared with regard to background current, signal noise, linear range, sensitivity, and detection limit. In this respect, sensors with gold or graphite/PTFE covered membranes outclass ones with platinum for this particular analyte and sensor configuration.  相似文献   

11.
Conductive films of gold were assembled on flexible polymer substrates such as Kapton and polyethylene using a solution-based process. The polymer substrates were modified by using argon plasma and subsequent coupling of silanes with amino- or mercapto- terminal groups. These modified surfaces were examined by X-ray photoelectron spectroscopy and contact angle measurements. Colloidal gold was assembled onto the silane-modified surface from solution. The gold particles are attached to the surface by covalent interactions with the thiol or amine group. Formation of a conductive film is achieved by increasing the coverage of gold by using a "seeding" method to increase the size of the attached gold particles. Field emission scanning electron microscopy was used to follow the growth of the film. The surface resistance of the films, measured using a four-point probe, was about 1 Omega/sq.  相似文献   

12.
We investigate the formation and distribution of the solid electrolyte interface (SEI) layer on a graphite anode with two additives [vinylethylene carbonate (VEC) and vinylene carbonate (VC)] in a formation process using XPS, field emission AES, and extreme high‐resolution SEM (XHR‐SEM) techniques, and we studied what factors play an important role in determining the formation of the SEI layer. The VEC‐derived SEI behaviors (morphology, thickness, compound, and balance over electrode position) on a graphite anode largely depend on the elevated temperature. The VC‐derived SEI layer is mostly formed in the initial charging step, showing simple growth (formation) behavior. It is suggested that the properties of the additives are important for SEI bonding configurations at the nanoscale film surface, and to achieve the stable SEI layer, there appears to be an effective formation process for the additive properties. This research highlights the challenges of developing a stable SEI layer with additives in the formation process for electric vehicle batteries and would make a contribution to the understanding of how formation conditions affect an SEI layer with respect to additive properties. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

13.
Poly‐aniline (PAn) film can be oxidized by contacting oxygen in an electron‐transfer reaction and its redox state, for instance the open circuit potential and the dielectric constant, is quantitatively related to oxygen concentration. This feature may contribute to an improved application of dissolved oxygen (DO) detection with the combined optical and electrochemical sensor. In this paper, PAn is used as a sensing surface to detect DO by the combination sensor composed of electrochemistry and total internal reflection imaging ellipsometry (EC‐TIRIE). Results demonstrate that both optical and electrical signals show a logarithmic correlation with DO concentration (0–20 ppm). Compared with the results obtained only with the gold surface, both the optical and electrical signals of the EC‐TIRIE sensor for DO detection are amplified with the PAn modified gold surface.  相似文献   

14.
Two cystine-bearing 1,3-bridged calix[4]arenes were used as the coatings of the quartz crystal microbalance (QCM) with gold electrodes. The two calix[4]arene derivatives were self-assembled onto the gold electrode surface by the covalent attachment between the di-sulfur and gold. The compound of cystine-bearing bi-phenylalanine 1,3-bridged calix[4]arene (CPC) with longer alkyl chain had better self-assembled capacity onto the fresh surfaces of gold electrode than that of cystine-bearing 1,3-bridged calix[4]arene (CC) with comparably shorter alkyl chain.The modified QCM sensors were used to recognize the butylamine isomers in gas. The results showed that the QCM coated with both compounds had preferential affinity to n-butylamine, then i-butylamine, t-butylamine in the range of low concentrations, indicating that in the recognition process, the steric hindrance effect played an important role when forming complex with guest molecules. When the concentrations of the analytes were increased, the polarity and the magnetism of the butylamine became determinative factors. The reversibility was improved greatly and the equilibrium time was much shorter on the self-assembled film than on the film obtained by dropping coating.  相似文献   

15.
The aim of the present paper is to characterize a cross‐linked horse heart cytochrome c (HHC) film on cysteamine‐modified gold electrodes. The HHC film was deposited using 1‐ethyl‐3‐(3‐dimethylaminopropyl)‐carbodiimide (EDC) as a coupling agent. Attenuated total reflection infrared (ATR‐IR) spectroscopic analyses were performed to characterize the newly formed surface on a qualitative and conformational level. The film thickness was measured using a noncontact optical surface profiler, while quantitative data and information on the heterogeneity of the film were obtained by means of synchrotron radiation X‐ray micro fluorescence (SR micro‐XRF). Results indicate that, in addition to electrochemical studies, spectroscopic analysis methods are essential to gain insight in the effect of immobilization strategies on protein conformations. The latter is of relevance in the development and optimization of biosensors. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

16.
Facile synthesis of multi‐branched gold nanostructures by using the tetrabutyl ammonium bromide (TBAB) as a capping agent is described. The reaction is carried out in a one‐step process at mild temperature. Gold nanostructures with more than six sharp branches ranging from 70 to 130 nm in length are synthesized in high yield. It is proposed that the relative weak adsorption capacity of TBAB leads to the incompletely covered gold surface and the growth of nanoparticles occurs on the uncovered gold surface, and therefore short branches appear consequently. Then positively charged TBAB layers on the gold surfaces prevent the branches from aggregating with each other which stimulates the branch growth. The prepared branched gold nanoparticles show efficient surface‐enhanced Raman scattering (SERS) properties. Low temperature (4°C) is unfavorable to the formation of multi‐branched gold nanostructures, and only thin small irregular plate‐like nanoparticles are produced. The addition of SDS in TBAB aqueous solution results in forming SDS micelles at much lower concentration of SDS (0.4 mmol/L) as compared to that in pure water, and short branched gold nanoparticles are obtained in the SDS‐TBAB system.  相似文献   

17.
The unique physico-chemical properties of gold nanoparticles portrayed in their chemical stability, the size-dependent electrochemistry, and the unusual optical properties make them suitable modifiers of various surfaces used in the fields of optical devices, electronics, and biosensors. In this work we present two different methods to obtain metallic gold nanoparticles at a liquid–liquid interface, and to control their growth by adjusting the experimental conditions. Decamethylferrocene (DMFC), used as an oxidizable compound dissolved in an organic solvent that is spread as a thin film on the surface of graphite electrode, serves as a redox partner to exchange electrons across the liquid–liquid interface with the other redox counter-partner [AuCl4]? present in the conjoined water phase. The interfacial electron transfer between the DMFC and the [AuCl4]? ions leads to deposition of metallic gold nanoparticles at the liquid–liquid interface. The structure and features of the deposited Au nanoparticles were studied by means of microscopic and voltammetric techniques. The morphology of the Au deposit depends on the concentration ratio of redox partners and both electrode and liquid–liquid interfacial potential differences. Depending on whether the Au deposit was obtained by ex situ (at open circuit potential) or by “in situ” (by cycling of the electrode potential) approach, we observed quite different effects to the ion transfer reactions probed by the thin-film electrode set-up. The possible reasons for the different behavior of the Au nanoparticles are discussed in terms of the structure and the properties of the obtained Au deposit. In separate experiments, we have demonstrated catalytic effects of the Au nanoparticles towards enhancing the electron transfer between DMFC and two aqueous redox substrates, hexacyanoferrate and hydrogen peroxide.  相似文献   

18.
Time of flight secondary ion mass spectrometry (ToF‐SIMS) has been used to determine the extent of surface modification of highly ordered pyrolytic graphite (HOPG) samples that were exposed to radio‐frequency methane and hydrogen plasmas. The ToF‐SIMS measurements were examined with the multivariate method of principal component analysis (PCA), to maximise the amount of spectral information retained in the analysis. This revealed that the plasma (methane or hydrogen plasma) modified HOPG exhibited greater hydrogen content than the pristine HOPG. The hydrogen content trends observed from the ToF‐SIMS studies were also observed in elastic recoil detection analysis measurements. The application of the ToF‐SIMS PCA method also showed that small hydrocarbon fragments were sputtered from the hydrogen‐plasma‐treated sample, characteristic of the formation of a plasma‐damaged surface, whereas the methane‐plasma‐treated surface sputtered larger hydrocarbon fragments, which implies the growth of a polymer‐like coating. Scanning tunnelling microscopy measurements of the modified surfaces showed surface features that are attributable to either etching or film growth after exposure to the hydrogen or methane plasma. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

19.
Compared to bulk gold, highly reactive mesoporous gold film deposits are prepared on a boron‐doped diamond electrode surface. An electroaggregation process causing 5 nm diameter gold nanoparticles to deposit cathodically from aqueous solution is implemented to control the amount of mesoporous gold at the electrode surface. The resulting electrode surface is characterized by electron microscopy and by cyclic voltammetry.  相似文献   

20.
The initial growth stage of C(60) thin film on graphite substrate has been investigated by scanning tunneling microscopy in ultrahigh vacuum at room temperature. The C(60) layer grows in a quasi-layer-by-layer mode and forms round, monolayer high islands on the graphite surface. The islands are confined by terraces on the graphite surface and the mobility of C(60) fullerenes across steps is low in all layers. The second and all subsequent layers adopt a fractal-dendritic shape, which was confirmed by calculating the fractal dimension (D=1.74 prior to island coalescence) and is in agreement with a diffusion limited aggregation. The profound differences between the growth of C(60) layers on graphite (first layer) and on C(60) surfaces (second and higher layers) are caused by the restriction of the C(60) mobility on the highly corrugated fullerene surfaces. The orientation of the fractal islands follows the hexagonal symmetry of the densely packed (111) surface of the fullerene lattice, which introduces a bias in the direction of molecule movement. The differences in surface topography on the nanoscale determine the mode of film growth in this van der Waals bonded system.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号