Novel porous polyurethane films

Polyurethane films treated in a two-stage process with aqueous bromine and ammonia solutions underwent significant modifications in crystalline and surface structure as well as in mechanical and physical properties. Bromine was sorbed on the film, and formed several charge transfer complexes with the soft and hard segments of the polyurethane as well as bridges between adjacent chains. In the second stage, ammonia reacted with the sorbed bromine producing gaseous nitrogen and ammonium bromide. The expansion of the gas resulted in a repacking of the polymeric chains and the formation of a porous structure. The bromine concentrations used and the times of contact between the films and the bromine were 0.02–0.06 normal and 1–10 min, respectively. The contact angle of the films decreased, depending on treatment conditions, from 73 to 20. The water vapor permeability increased three-fold. The treatment appeared to bring about a crystallization in the hard as well as in the soft segments of the PU as shown by differential scanning calorimetry measurements. Possible applications of the treated films for wound dressing are discussed. © 1998 John Wiley & Sons, Ltd.     

Study of phase separation in polyurethane using paramagnetic labels. Effect of soft segment molecular weight,structure, and thermal history

The morphology of segmented polyurethane (PU) elastomers was studied by means of ESR at various temperatures ranging from 100K-450K. The PU's were based on 4,4'-diphenylmethane diisocyanate (MDI), poly (oxytetramethylene) glycols (PTMO) and hydroxyl-terminated random compolymers of tetrahydrofuran and 3-methyl-tetrahydrofuran (THF/Me-THF). Purified 1,4-butanediol (BD) was used as a chain extender. The nitroxide probe, 4-hydroxy-2-2',6-6'-tetramethylpiperidine-1-oxyl (TEMPOL), was used to label the polyurethanes by reaction with an NCO group of MDI. Analysis of the electron spin resonance (ESR) spectra suggested that the label situates at heterogeneous sites, which means that a two-phase domain is present. The morphologies at 300K and 400K were compared. It was found from ESR spectra that polyurethanes made from soft segments having higher MW exhibited greater phase separation at 300K than their corresponding elastomers made from lower MW soft segments. However, at 400K the more isotropic ESR spectra for the PUs containing higher MW soft segments suggested that the PUs were more mobile than their analogs having lower MW soft segments. The introduction of 3-methyl side groups decreased the phase mixing at 400K due to steric hindrance.     

Waterborne trifunctionalsilane‐terminated polyurethane nanocomposite with silane‐modified clay

Trifunctional organosilane‐modified clay was synthesized and used to prepare waterborne trifunctionalsilane‐terminated polyurethane (WSPU)/clay nanocomposite dispersions in this study. Qualitative evidence of the presence of chemically attached silane molecules on clay were confirmed by Fourier transform infrared spectroscopy. The grafted amount and the grafting yield were determined by thermogravimetric analysis and the obtained results were in good agreement with the cation exchange capacity of pristine clay. X‐ray diffraction and transmission electron microscopy examinations indicated that the clay platelets are mostly intercalated or partially exfoliated in the SPU matrix with a d‐spacing of ～2.50 nm. Clay does not influence the location and peak broadness of the glass transition temperature of soft segment as well as hard segment domains in the WSPU/clay films. WSPU/clay dispersion with higher clay content exhibits a marginal increase in the average particle size, but silane modified clay has a pronounced effect compared with Cloisite 20A‐based nanocomposites. In addition, the incorporation of organophilic clay can also enhance the thermal resistance and tensile properties of WSPUs dramatically through the reinforcing effect. The improvement in water and xylene resistance of the silane modified clay nanocomposites proved that trifunctional organosilane can be used as effective modifiers for clays. Storage stability results confirmed that the prepared nanocomposite dispersions were stable. This method provides an efficient way to incorporate silane modified clay in SPU matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2747–2761, 2007     

Effect of soft segment length on properties of fluorinated polyurethanes

The effects of soft segment length on the variations in morphology, surface composition, and hydrophilicity have been studied in fluorinated polyurethanes (FPUs) and correlated with their preliminary blood compatibility as evidenced by in vitro platelet adhesion experiments. The fluorinated polyurethanes were obtained using hexamethylene diisocyanate (HDI) and chain extender of 2,2,3,3-tetrafluoro-1,4-butanediol (TF) as the hard segment as well as various soft segments—polytetramethyl oxides (PTMO) with molecular weights of 650, 1000, 1400, and 2000. The increased phase separation in hard-segment domains with lengthening soft segment was observed by FT-IR, which is believed to result in enhanced strength of hydrogen bonds and good hard-segment order arrangement. Thin-film XRD results indicate at least three lateral distances existing between adjacent hard segments in the crystallized hard segment. Their distribution depends strongly on the length of soft segment. Lengthening soft segment promotes the formation of dense arrangement of crystallized hard segments. Compared with the effect of phase separation, surface composition was found to exert a major influence on the preliminary blood compatibility of fluorinated polyurethanes. Increasing fluorine content by decreasing soft segment length promotes reduction in platelet adhesion and activation on polyurethane surfaces.     

Influence of varying hard segments on the properties of chemically crosslinked moisture‐cured polyurethane‐urea

Polyurethane prepolymers are widely used in the reactive hot melt adhesives and moisture‐cured coatings. The chemically crosslinked moisture‐cured formulation based on PEG‐1000 and isophorone diisocyanate was prepared with NCO/OH ratio of 1.6:1.0. Trimethylol propane was used as a crosslinking agent. The excess isocyanate of the prepolymer was chain extended in the ratio of 2:1 (NCO/OH) with different aliphatic diols, and 4:1 with different aromatic diamines. The polymer network maturation during moisture cure was followed by dynamic mechanical thermal analyzer (DMTA) instrument. The thermal and dynamic mechanical properties of the crosslinked polymers were evaluated using thermogravimetric analysis, differential scanning calorimetric analysis and DMTA. Surface properties were evaluated through angle‐resolved X‐ray photoelectron spectroscopy. The present article discusses the physical properties of moisture‐cured polyurethane‐urea (MCPU) containing chemical crosslinks in the hard segment. The complete moisture‐cured polymers showed amorous results toward room temperature modulus, tensile strength, hardness, thermal stability, and transparency. The surface properties showed the enrichment of soft segments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 102–118, 2006     

Investigations of morphology of moisture‐cured silicone–urethanes

Results of studies on synthesis and properties of siloxane–urethane prepolymers as well as on selected properties of moisture‐cured silicone–urethanes have already been published. In this paper, some results of investigations of the effect of chemical structure of such silicone–urethane polymers on their phase seggregation investigated using mainly (TEM) transmission electron microscopy and small‐angle x‐ray scattering (SAXS) techniques are presented. It was found in TEM studies that in silicone‐urethanes obtained by moisture‐curing of NCO‐terminated prepolymers prepared from siloxane oligomer diols (SOD) and isophoronediisocyanate (IPDI), two factors determine the morphology of samples: length of siloxane chain and NCO/OH ratio. SAXS investigations showed that these silicone–urethanes had a lamellar structure. It was found that the long period of this structure changed from 4 to 9 nanometers as the siloxane chain length increased nine times. The increase of the long period correlated with the decrease of Young's modulus of the corresponding samples. TEM investigations of silicone–urethanes obtained by moisture‐curing of NCO‐terminated prepolymers prepared from the blends of SOD and polyoxypropylenediol (PPG) revealed complex morphology which depended on the SOD/PPG ratio. Copyright © 2000 John Wiley & Sons, Ltd.     

IR spectra studies of core‐shell type waterborne polyacrylate‐polyurethane microemulsions

The hydrogen bonds in films of the polyurethane and the core‐shell type polyacrylate‐polyurethane microemulsions have been studied by FTIR spectroscopy in the regions of  NH absorption and CO absorption. The effects on hydrogen bonds of the composition, the core‐shell ratio were revealed. At the same time, the relationship between the hydrogen bonds and the crosslinked structures (Type A and Type B) was discovered. The shifts of the  NH and CO stretching bands to higher frequencies and the shift of  NH bending bands to lower frequencies, with the increase of acetone CO number in the core, mean that the hydrogen bonds between the soft and hard segments, and those in the short‐range order in the hard segment phase, are broken. The dipole/dipole interaction which is supposed to exist between the acetone CO groups in the core and the urethane CO in the shell can change the hydrogen bond distribution in the shell, and at the same time, lead to hydrogen bonds between acetone CO in the core and the urethane  NH in the shell. Type A and B crosslinked structure between the core and the shell located at the interface of the core and the shell can confine the acetone CO within the crosslinking network, and Type B crosslinked structure also decreases the acetone CO numbers. These weaken the dipole/dipole interaction between the acetone CO and the urethane CO, and lead to the decrease of the effect of the acetone CO groups on the hydrogen bond distribution in the shell. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2642–2650, 1999     

Investigation on the stress behavior of cellulose acetate and the development of highly moisture‐resistant optical films for display devices

An optical film with high optical anisotropy was prepared by the stretching of a cellulose acetate film and the consequential orienting of a retardation‐enhancing additive. The change in retardation in response to moisture absorption was explored and it was found that the degree of the retardation variation is strongly related to the stretching temperature. Stress generated by the stretching and its relaxation was systematically investigated to elucidate the effect of stretching temperature on the irreversible change in retardation upon moisture absorption. The results show that the magnitude of releasable stress plays an important role in controlling changes in optical properties. In addition, the difference in the deformation behavior between glassy and rubbery states should be taken into account in the development of a moisture‐resistant optical film. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1470–1478     

Poly(propylene glycol)‐based ammonium ionenes as segmented ion‐containing block copolymers

The synthesis and characterization of series of segmented poly(propylene glycol) (PPG)‐based ammonium ionenes is described. Bromine end‐capped oligomers were successfully synthesized using the reaction of 6‐bromohexanoyl chloride with 1000, 2000, and 4000 g/mol PPGs. ¹H NMR spectroscopy, titration studies, and matrix‐assisted laser desorption ionization‐time of flight (MALDI‐TOF) mass spectrometry revealed the difunctionality of the oligomers. First, a series of PPG‐based ammonium ionenes was synthesized from bromine end‐capped PPG oligomers and N,N,N′,N′‐tetramethyl‐1,6‐hexanediamine. For this series, a single glass transition temperature (T_g) of approximately ?66 °C was observed through differential scanning calorimetry (DSC); dynamic mechanical analysis (DMA) showed the onset of flow ranged from 20 to 80 °C. In addition, a series of PPG‐based ammonium ionenes containing 1,12‐dibromododecane was synthesized to increase the aliphatic hard segment (HS) content and enhance the mechanical properties of the resulting materials. For these, two T_g's were observed using DMA; DMA also showed the onset of flow of ionenes containing higher HS content (33 wt %) occurred in the range of 100–140 °C. Tensile analysis for these ionenes demonstrated an average tensile strength at break ranging from 0.2 to 2.4 MPa. Small angle X‐ray scattering (SAXS) profiles for these ionenes showed that Bragg distances increase linearly with the molecular weight of PPG soft segment. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4159–4167, 2010     

Water vapor permeability of shape memory polyurethane with amorphous reversible phase

Shape memory thermoplastic polyurethanes (TPUs), based on amorphous soft segment from the reaction of hexamethylene diisocyanate and 1,2‐butane diol, and the crystalline hard segment from 4,4′‐methylenediphenyl diisocyanate and 1,6‐hexanediol, were modified by hydrophilic segments, diol‐terminated poly(ethylene oxide) or dimethylol propionic acid (DMPA). Differential scanning calorimetry, dynamic mechanical testing, tensile testing, and the measurement of shape memory effect, water swell, and water vapor permeability were carried out to examine these TPUs. The hydrophilic segment increased the hysterisis in shape memory effect by reducing the crystallinity of the hard segment. The neutralized DMPA unit enhanced the sensitivity of the thermoresponsive water vapor permeability (WVP) by amplifying the increase of WVP at the temperature range above the glass transition temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3009–3017, 2000     

Water transport properties of thermoplastic polyurethane films

Two linear segmented polyurethanes, based on poly(oxyethylene) (POE) as a soft segment and 4,4′‐diphenylmethane diisocyanate and 1,4‐butanediol as hard segments and differing in their soft segment length, have been studied from a water vapor transport point of view. For both polyurethanes, the water sorption is governed by a Fickian process, and the thermoplastic polyurethane with the longer POE segments displays the higher water diffusion rate. The water sorption isotherms are Brunauer Emmet Teller (BET) type III for both thermoplastic polyurethanes, and the water uptakes are directly related to the polymer POE content. The Flory–Huggins theory cannot correctly describe the sorption isotherms. More sophisticated approaches (Koningsveld–Kleinjtens or Guggenheim‐Anderson‐de Boer (GAB) models) are needed to fit the experimental water uptakes. The positive deviation from Henry's law and the decrease in the apparent diffusion coefficient observed at a high activity have been particularly studied. In this activity range, an isotherm analysis based on the cluster integral of Zimm and Lundberg suggests some clustering phenomenon, which seems consistent with the diffusion coefficient variation. In agreement with the sorption results, the water permeability coefficients are small at low activities, and they increase greatly with the relative pressure of water. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 473–492, 2004     

Effects of hard‐segment polymers on CO2/N2 gas‐separation properties of poly(ethylene oxide)‐segmented copolymers

Poly(ethylene oxide)‐segmented polyurethanes (PEO‐PUs) and polyamides (PEO‐PAs) were prepared, and their morphology and CO₂/N₂ separation properties were investigated in comparison with those of PEO‐segmented polyimides (PEO‐PIs). The contents of the hard and soft segments in the soft and hard domains, W_HS and W_SH, respectively, were estimated from glass‐transition temperatures with the Fox equation. The phase separation of the PEO domains depended on the kind of hard‐segment polymer; that is, W_HS was in the order PU > PA ≫ PI for a PEO block length (n) of 45–52. The larger W_HS of PUs and PAs was due to hydrogen bonding between the oxygen of PEO and the NH group of urethane or amide. The CO₂/N₂ separation properties depended on the kind of hard‐segment polymer. Compared with PEO‐PIs, PEO‐PUs and PEO‐PA had much smaller CO₂ permeabilities because of much smaller CO₂ diffusion coefficients and somewhat smaller CO₂ solubilities. PEO‐PUs also had a somewhat smaller permselectivity because of a smaller solubility selectivity. This was due to the larger W_HS of PEO‐PUs and PEO‐PAs, that is, a greater contamination of PEO domains with hard urethane and amide units. For PEO‐PIs, with a decrease in n to 23 and 9, W_HS became large and CO₂ permeability decreased significantly, but the permselectivity was still at a high level of more than 50 at 35 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1707–1715, 2000     

Study on the moisture absorption of zwitterionic copolymers for moisture‐sensitive shape memory applications

This study develops a new type of moisture‐sensitive shape memory polymer based on zwitterionic copolymers synthesized with acrylic acid (AA) and 3‐Dimethyl (methacryloyloxyethyl) ammonium propane sulfonate (DMAPS). The moisture absorption properties of zwitterionic copolymers are particularly investigated in this paper. The results demonstrate that the DMAPS/AA copolymers possess a sulfobetaine structure and form a two‐phase separation structure. The zwitterionic copolymers show both good hydrophilic properties and moisture absorption properties. Both AA and DMAPS segments influence the hydrophilic properties and moisture absorption of the composite copolymer. The moisture absorption process is well modeled by Fick's second law in its initial stage. The moisture absorption is mainly determined by immersion conditions and the given materials' structure. Moisture absorption speed and saturated moisture absorption both increase with an increase in DMAPS content as well as the immersion temperature. The increased moisture absorption rate and higher saturated moisture absorption results from the higher activation energy of diffusion. The DMAPS/AA copolymers demonstrate adequate moisture‐sensitive shape memory effects. Stain recovery is faster in the zwitterionic copolymers containing higher DMAPS content, whereas the final shape recovery decreases with an increase of DMAPS content. Finally, it is proposed that not only good moisture absorption units are required but also physical crosslinks should be improved for moisture‐sensitive shape memory polymers. Copyright © 2017 John Wiley & Sons, Ltd.     

Synthesis and characterization of novel segmented polyurethane/clay nanocomposite via poly(ε-caprolactone)/clay

A novel segmented polyurethane/clay (PU/clay) nanocomposite based on poly(caprolactone), diphenylmethane diisocyanate, butanediol, and poly(caprolactone)/clay prepolymer was synthesized as evidenced by FTIR and X-ray diffraction studies. Poly(caprolactone)/clay (PCL/clay) prepolymer was first synthesized in a nanocomposite form as confirmed by X-ray diffraction. X-ray diffraction study showed that PU/clay contained crystalline structure due to the presence of PCL/clay. In mechanical properties, about 1.4% PCL/clay in PU/clay resulted in a large increase in the elongation of PU/clay. However, when the amount of PCL/clay was 4.2%, the elongation of PU/clay was reduced drastically. This behavior indicated that PU/clay can be transformed from an elastomer to a thermoplastic material as the amount of PCL/clay in PU/clay increased. Additionally, the lap shear stress of PU/clay was at least three times that of neat PU as a result of the PCL/clay component. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2225–2233, 1999     

High performance bio-based polyurethane elastomers: Effect of different soft and hard segments

In this work, a series of high performance bio-based polyurethanes(bio-PUs) were synthesized from polylactide(PLA)-based diols, different diisocyanates(TDI, MDI, HDI, IPDI) and chain extender 1,4-butanediol, in which different soft and hard segments are used to adjust their transition temperatures and mechanical properties. Poly(lactide-co-caprolactone)copolymer diols(co-PLAols) instead of PLA diols as the soft segment improved the thermal stability and mechanical properties of the synthesized bio-PUs. Among them, MDI-based bio-PUs have the highest T_g(43.8 °C), tensile strength(23.5 MPa) and modulus(380.8 MPa), while HDI-based bio-PUs have the lowest T_g(21.4 °C) and highest elongation at break(580%). Especially, the bio-PUs synthesized from co-PLAols and MDI demonstrate better mechanical properties,closed to petroleum-based commodities. Furthermore, the obtained bio-PUs display good shape memory properties at body temperature and cytocompatibility. Therefore, these bio-PUs are promising for applications in biomedical fields.     

A study of fluorescent‐dye polyurethane ionomer 1

The reaction of toluene diisocyanate with 4‐hydroxycoumarin or 7‐hydroxycoumarin or dicumarol and other additives to form the structure of fluorescent‐dye polyurethane ionomer, which has been successfully synthesized at our laboratary, is demonstrated by Fourier transform infrared spectra. The fluorescence study of coumarins present in N,N‐dimethyl acetamide indicates that these coumarins form aggregations and exhibit fluorescence at around 304 nm. The experimental results show that the surface tension of 4‐hydroxycoumarin or 7‐hydroxycoumarin in N,N‐dimethylacetamide appears to decrease with increasing concentration of 4‐hydroxycoumarin or 7‐hydroxycoumarin. On the other hand, the surface tension of dicumarol in N,N‐dimethylacetamide increases with increasing concentration of dicumarol, indicating that increased hydrophilic groups of dicumarol adsorbed at the surface of N,N‐dimethylacetamide become even more ordered. For fluorescent‐dye polyurethane ionomer in aqueous solution, the number average particle sizes are seen to increase with an increase of coumarin concentration. Since the intermolecular interaction between hydrophilic groups of fluorescent‐dye polyurethane ionomer molecules themselves may become strong, therefore, the free volume of these ionomer molecules are considered to be increased significantly. This may be why the number average particle size becomes large. For self‐cured films made by fluorescent‐dye polyurethane ionomer, the tensile strength is seen to increase with increasing concentration of coumarin, as a result of increased crosslinking resulting from increased hydrophilic groups of coumarins attached to the backbone of the ionomer molecules. The elongation of self‐cured film made by dicumarol‐based polyurethane iomomer, on the other hand, decreases with increasing concentration of dicumarol. Copyright © 2000 John Wiley & Sons, Ltd.     

聚氨酯软质塑料的合成工艺

聚氨酯(polyurethane)是主链上含有重复氨基甲酸酯基团聚合物的总称,由聚二异氰酸酯或多异氰酸酯与多羟基化合物加聚而得。其合成工艺投资大,耗电多,浪费大。本文的合成路线则较合理地解决这些问题。     

Effect of nanotube functionalization on the properties of single‐walled carbon nanotube/polyurethane composites

A commercially available aliphatic thermoplastic polyurethane formulated with a methylene bis(cyclohexyl) diisocyanate hard segment and a poly(tetramethylene oxide) soft segment and chain‐extended with 1,4‐butanediol was dissolved in dimethylformamide and mixed with dispersed single‐walled carbon nanotubes. The properties of composites made with unfunctionalized nanotubes were compared with the properties of composites made with nanotubes functionalized to contain hydroxyl groups. Functionalization almost eliminated the conductivity of the tubes according to the conductivity of the composites above the percolation threshold. In most cases, functionalized and unfunctionalized tubes yielded composites with statistically identical mechanical properties. However, composites made with functionalized tubes did have a slightly higher modulus in the rubbery plateau region at higher nanotube fractions. Small‐angle X‐ray scattering patterns indicated that the dispersion reached a plateau in the unfunctionalized composites that was consistent with the plateau in the rubbery plateau region. The room‐temperature modulus and tensile strength increase was proportionally higher than almost all increases seen previously in thermoplastic polyurethanes; however, the increase was still an order of magnitude below what has been reported for the best nanotube–polymer systems. Nanotube addition increased the hard‐segment glass transition temperature slightly, whereas the soft‐segment glass transition was so diffuse that no conclusions could be drawn. Unfunctionalized tubes suppressed the crystallization of the hard segment; whereas functionalized tubes had no effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 490–501, 2007     

One‐step preparation of polyurethane dispersions by miniemulsion polyaddition

The application of the miniemulsion process to synthesize polyurethane dispersions with diameters of about 200 nm in a one‐step procedure, free of molecular weight restrictions, is described. With IR and NMR spectroscopy, it is shown that the reaction of the diisocyanate with the diol is the main reaction, whereas the reaction with water is only a side reaction. Differential scanning calorimetry measurements and transmission electron microscopy are used to characterize both polymer and latex properties. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2520–2524, 2001     

Study on siloxane‐modified polyurethane dispersions from various polydimethylsiloxanes

In this work, various polydimethylsiloxanes (PDMS) are incorporated with isophorone diisocyanate (IPDI), 2,2‐bis(hydroxymethyl)propionic acid (DMPA), and poly(tetramethylene oxide) (PTMO) by the prepolymer process to synthesize a series of siloxane‐modified polyurethane dispersions (PUDs) with 35 wt % solid content, viscosities of 20–100 cps, and particle sizes of 40–130 nm. Hydrophobic PDMS was introduced into the PU chain either based on random distribution or through the block segment arrangement. We also establish the composition‐property relationship of PDMS‐PUD, which includes PDMS's type and molecular weight and PDMS‐PUD film's contact angle and mechanical property. The tensile strength of PDMS‐PUD film is decreased with increasing amount of PDMS. Scanning electron microscopy for chemical element analysis indicated that PDMS migrated to the surface much more easily in the block arrangement than in the random distribution. Also, some PDMS‐PUD films show a peau‐like surface, so their PUDs are considered promising to be used in processes for textiles. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3482–3490, 2005