Thermal behaviors of poly(ethylene terephthalate)/SiO2 nanocomposites prepared by cryomilling

The thermal behaviors of poly (ethylene terephthalate) (PET)/SiO₂ nanocomposites prepared by cryomilling were studied, by comparing with the cryomilled PET and the raw PET. Cryomilling induced amorphization of crystalline PET matrix and the decrease of PET molecular weight. Cryomilled PET/SiO₂ nanocomposites have two abnormal phenomena in the DSC 1st heating thermogram due to the stored energy induced by cryomilling. During DSC cooling process, the dispersed nanometer SiO₂ particles play a role of nucleating agent in PET matrix, and the hot crystallization ability of PET/SiO₂ nanocomposites improves a lot. Besides, the heat stability of cryomilled PET/SiO₂ nanocomposites improves more much during reheating. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1351–1356, 2006     

Structural changes in poly(ethylene terephthalate) induced by cryomilling and ambimilling

Poly(ethylene terephthalate) (PET) has been subjected to high energy ball milling at two different temperatures (cryogenic temperature and ambient temperature). The morphological and crystal structural evolutions of milled powders are characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X‐ray diffraction measurement. The particle size and distribution of milled powders are measured by laser diffraction particle size analyzer (LDPSA). The results indicate that the mechanisms of refining and amorphization are remarkably different between cryomilling (mechanical milling under cryogenic temperature) and ambimilling (mechanical milling under ambient temperature). The cryomilled particles are agglomerated morphology, while the ambimilled particles are cold‐welded morphology. Cryomilling induced crystalline PET translates to general amorphous, however, ambimilling induced crystalline PET transforms to oriented amorphous. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 986–993, 2006     

Solid mechanochemical preparation of core‐shell SiO2 particles and their improvement on the mechanical properties of PVC composites

In this article, a solid mechanochemical route to prepare core‐shell structured particles was introduced. X‐ray photoelectron spectrum, transmission electron microscope and dissolving experimental results indicated the formation of [(inorganic particle)/(elastomer)] core‐shell structured particles. The thermal stable experiments showed that untreated SiO₂ can cause dehydrochlorination of poly(vinyl chloride) (PVC) and discoloration of PVC/SiO₂ composites and the formation of core‐shell structured SiO₂ particles will improve the thermal stability of PVC/SiO₂ composites. The mechanical properties and rheological results showed that the formation of core‐shell structured SiO₂ particles can both improve the mechanical and processing properties of PVC/SiO₂ composite. ACR in PVC/(SiO₂‐PMMA‐ACR) composites acted not only as toughener for PVC matrix but also as cushion breaker if the content of ACR is enough. Meanwhile compared with other SiO₂ particles the formation of core‐shell structured SiO₂ particles can decrease the apparent viscosity, increase the critical shear rate and improve the appearance of extrudes of PVC/SiO₂ composites. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 938–948, 2008     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

Preparation of SiO2/PMMA composite particles via conventional emulsion polymerization

A series of SiO₂/PMMA composite particles with different morphologies were prepared by conventional emulsion polymerization by the aid of acid–base interaction between the silanol groups of unmodified silica particles and the amino groups of 4‐vinylpyridine. In this approach, no surface treatment for nanosilica particles was required. The morphologies of composite particles, for example, multicore–shell, raspberry‐like, and conventional core–shell, could be controlled by modulating emulsifier content, monomer/silica ratio, silica size, and monomer feed method. The possible particle formation mechanisms were discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3807–3816, 2006     

Synthesis and characterization of polyaniline/silicon dioxide composites and preparation of conductive films

The focus of this study was to synthesize the inherently conductive polymer polyaniline using an optimized process to prepare polyaniline/silicon dioxide (PANI/SiO₂) composites by in situ polymerization and ex situ solution mixing. PANI and PANI/SiO₂ composite films were prepared by drop‐by‐drop and spin coating methods. The electrical conductivities of HCl doped PANI film and PANI/SiO₂ composite films were measured according to the standard four‐point‐probe technique. The composite films exhibited an increase in electrical conductivity over neat PANI. PANI and PANI/SiO₂ composites were also investigated by spectroscopic methods including UV‐Vis, FT‐IR, and Photoluminescence. UV‐Vis and FT‐IR studies showed that SiO₂ particles affect the quinoid units along the polymer backbone and indicate strong interactions between the SiO₂ particles and the quinoidal sites of PANI (doping effect). The photoluminescence properties of PANI and PANI/SiO₂ composites were studied and the PANI/SiO₂ composites showed increased intensity as compared to neat PANI. The increase of conductivity of PANI/SiO₂ composite may be partially due to the doping or impurity effect of SiO₂ where the silicon dioxides compete with chloride ions. The morphology of particles and films were examined by a scanning electron microscope (SEM). SEM measurements indicated that the SiO₂ were well dispersed and isolated in composite films. Copyright © 2009 John Wiley & Sons, Ltd.     

Polyaniline/iron nanocomposites prepared by cryomilling

The polyaniline/iron nanocomposites with both conducting and magnetic properties have been prepared by cryomilling (high‐energy ball milling under cryogenic temperature), in which the average size of iron grains attains 20 nm. Enhanced coercivity of 206 Oe and decreased conductivity of 0.1 S cm^?1 at room temperature have been obtained for the nanocomposites containing 10% volume fraction of iron in polyaniline after cryomilling for 20 h. The high value of the coercivity could be considered due to the presence of a fraction of single‐domain particles in the nanocomposites. The low value of the conductivity could be considered due to the dedoping of conducting polyaniline with the cryomilling time. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3157–3164, 2006     

A generalized technique for the encapsulation of nano‐sized NiO particles by styrene‐2‐hydroxyethyl methacrylate copolymer

Encapsulation of nickel oxide (NiO) particles is of great interest to the researchers as such modification produces remarkable improvement in properties and versatility in application potential. In this investigation, nanosized NiO particles were first prepared by calcination of nickel hydroxide precursor obtained using a simple liquid‐phase process. The produced NiO particles were stabilized with oleic acid and then treated with tetraethylorthosilicate to produce NiO/SiO₂ composite seed particles. Finally tri‐layered inorganic/organic composite particles were prepared by seeded copolymerization of styrene and 2‐hydroxyethyl methacrylate (HEMA) in the presence of NiO/SiO₂ composite seed particles. The produced composite particles named as NiO/SiO₂/P(S‐HEMA) were colloidally stable, and the obtained particles were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy and thermogravimetric analyses. Copyright © 2015 John Wiley & Sons, Ltd.     

Crystal growth in alumina/poly(ethylene terephthalate) nanocomposite films

The crystal growth and morphology in 150‐nm‐thick PET nanocomposite thin films with alumina (Al₂O₃) nanoparticle fillers (38 nm size) were investigated for nanoparticle loadings from 0 to 5 wt %. Transmission electron microscopy of the films showed that at 1 wt % Al₂O₃, the nanoparticles were well dispersed in the film and the average size was close to the reported 38 nm. Above 2 wt % Al₂O₃, the nanoparticles started to agglomerate. The crystal growth and morphological evolution in the PET nanocomposite films kept at an isothermal temperature of 217 °C were monitored as a function of the holding time using in situ atomic force microscopy. It was found that the crystal nucleation and growth of PET was strongly dependent on the dispersed particles in the films. At 1 wt % Al₂O₃, the overall crystal growth rate of PET lamellae was slower than that of the PET homopolymer films. Above 2 wt % Al₂O₃, the crystal growth rate increased with nanoparticle loading because of heterogeneous nucleation. In addition, in these PET nanocomposite thin films, the Al₂O₃ nanoparticles induced preferentially oriented edge‐on lamellae with respect to the surface, which was not the case in unfilled PET as determined by grazing‐incidence X‐ray diffraction. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 747–757, 2007     

Morphology,crystalline structure,and properties of poly(vinylidene fluoride)/silica hybrid composites

Poly(vinylidene fluoride)/silica (PVDF/SiO₂) hybrid composite films were prepared via sol–gel reactions from mixtures of PVDF and tetraethoxysilane in dimethylacetamide. Their morphology, crystalline structure, and thermal, mechanical, and electrical properties were examined. For morphology measurements, scanning electron microscopy and optical microscopy were applied. X‐ray diffraction and infrared analyses showed that the crystalline structure of PVDF was not changed much by the addition of SiO₂, indicating that there was no interaction between PVDF and SiO₂. With increasing SiO₂ content, the melting temperature rarely changed, the degree of crystallinity and the dielectric constant decreased, and the decomposition temperature slightly increased. A PVDF/SiO₂ hybrid composite film with 5 wt % SiO₂ exhibited balanced mechanical properties without a severe change in the crystalline structure of PVDF, whereas for the hybrid composites with higher SiO₂ contents (>10 wt %), the mechanical properties were reduced, and the spherulite texture of PVDF was significantly disrupted by the presence of SiO₂ particles. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 19–30, 2002     

Synthesis and properties of silica/polystyrene/polyaniline conductive composite particles

In this study, silica/polystyrene/polyaniline (SiO₂/PS/PANI) conductive composite particles were synthesized by four sequential reactions. The nanosized SiO₂ particles were synthesized from tetraethoxysilane (TEOS) by a sol–gel process with water as the solvent medium, followed by a surface modification with triethoxyvinylsilane; then the surface modified SiO₂ particles were used as seeds to synthesize SiO₂/PS composite particles with soapless seeded emulsion polymerization. Finally, the SiO₂/PS particles were used as seeds to synthesize the SiO₂/PS/PANI conductive composite particles. The sol–gel process of SiO₂, the effect of surface modification, and several other factors that influenced polymerization of styrene in the soapless seeded emulsion polymerization will be discussed. Either potassium persulfate (KPS) or 2,2′‐azobis(isobutyramidine) dihydrochloride (AIBA) was used as the initiator to synthesize the uniform SiO₂/PS particles successfully, and the cross‐section morphology of the SiO₂/PS particles was found to be of a core–shell structure, with SiO₂ as the core, and PS as the shell. The SiO₂/PS particles were well dispersed in many organic solvents. In the following step to synthesize SiO₂/PS/PANI conductive composite particles, sodium dodecyl sulfate (SDS) played an important role, specifically, to absorb aniline onto the surfaces of the SiO₂/PS particles to carry out the polymerization of aniline over the entire surface of the particles. The conductivity of the SiO₂/PS/PANI composite particles approached that of semiconductive materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 342–354, 2005     

Synthesis and properties of bismaleimide‐modified novolak resin/silsesquioxane nanocomposites

Bismaleimide‐modified novolak resin/silsesquioxane (BMI‐PN/SiO_3/2) nanocomposites were prepared by the sol–gel process. The reactions in the sol–gel synthesis were characterized by Fourier transform infrared spectroscopy. It was found by field emission scanning electron microscopy and atomic force microscopy studies that the particle size of the dispersed phase was about 100 nm, and there existed particle aggregates. The proportion of bismaleimide in the BMI‐PN/SiO_3/2 nanocomposites showed an important effect on the thermal properties of the composites, as demonstrated by thermogravimetric analysis and dynamical mechanical analysis. Major improvements in the glass‐transition temperature and the heat resistance of the material were achieved by the introduction of the nanosized SiO_3/2 inorganic phase, and the modulus at high temperatures was improved too. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2599–2606, 2003     

Preparation and properties of Nafion/SiO2 composite membrane derived via in situ sol–gel reaction: size controlling and size effects of SiO2 nano‐particles

A novel technique in controlling the size of SiO₂ nano‐particles in the preparation of Nafion/SiO₂ composite membranes via in situ sol–gel method, as well as the effects of nano‐particle size on membrane properties and cell performance, is reported in this paper. Nafion/SiO₂ composite membranes containing SiO₂ nano‐particles with four different diameters (5 ± 0.5, 7 ± 0.5, 10 ± 1, and 15 ± 2 nm) are fabricated by altering the reactant concentrations during in situ sol–gel reaction. Sequentially, size effects of SiO₂ nano‐particles on membrane properties and cell performance are investigated by SEM/EDAX, TEM, TGA, mechanical tensile, and single cell tests, etc. The results suggest that 10 nm is a critical diameter for SiO₂ incorporated into Nafion matrix, exhibiting desirable physico‐chemical properties for operation at elevated temperature and low humidity. At 110°C and 59% RH, the output voltage of the cell equipped with Nafion/SiO₂ (10 nm) obtains an output voltage of 0.625 V at 600 mA/cm², which is 50 mV higher than that of unmodified Nafion. Copyright © 2010 John Wiley & Sons, Ltd.     

Structural and nanomechanical properties of sol–gel prepared (K,Na)NbO3 thin films

Perovskite (K, Na)NbO₃ (KNN) thin films (~100 nm) were prepared by sol–gel/spin coating process on Pt/SiO₂/Si substrates and annealed at 650 °C. The structural properties of KNN films were confirmed by X‐ray diffraction analysis (XRD), Raman spectroscopy and scanning electron, transmission electron and atomic force microscopy (SEM, TEM and AFM) analysis. Pure perovskite phase of K_0.65Na_0.35NbO₃ in nonstoichiometric composition with monoclinic symmetry in film was revealed. Uniform homogeneous microstructure of KNN film with the roughness (~6.9 nm) contained spherical particles (~50–90 nm). Nanoindentation technique was used to characterize the mechanical properties of KNN films. Elastic modulus and hardness of Pt, SiO₂ and KNN thin films were calculated from their composite values of KNN/Pt/SiO₂/Si film/substrate system. The modulus and hardness of KNN film (71 and 4.5 GPa) were lower in comparison with SiO₂ (100 and 7.5 GPa). Pt film (~30 nm) did not influence the composite modulus, but had effect on hardness of KNN film. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation of magnetically doped multilayered functional silica particles via surface modification with organic polymer

Magnetically modified functional particles are emerging as one of the most promising candidate in numerous multidisciplinary applications. In this research, a simple process has been developed to prepare magnetically modified aminated silica (SiO₂) particles. Herein, submicron‐sized SiO₂ particles were modified with poly(methylmethacrylate‐methacrylic acid) by seeded polymerization without any stabilizer. The carboxyl groups localized near the particles surface were then covalently linked with ethylene diamine to prepare aminated composite particles. Iron ions were then precipitated on the surface of aminated composite particles to obtain magnetically doped functional SiO₂ particles. The preparation of such particles was confirmed by scanning electron microscopy, Fourier transform infrared, ¹H NMR, X‐ray photoelectron spectroscopy and thermogravemetric analyses. Relative measurement of adsorption study of different biomolecules suggested that magnetically doped functional silica particles are comparatively hydrophobic. Copyright © 2012 John Wiley & Sons, Ltd.     

Mesoporous silica particles grafted with poly(ethyleneoxide‐block‐N‐vinylcaprolactam)

Mesoporous silica particles were grafted with thermoresponsive poly(ethyleneoxide‐b‐N‐vinylcaprolactam), PEO‐b‐PVCL. N‐vinylcaprolactam was first polymerized on particle surfaces using surface initiated atom transfer radical polymerization (SI‐ATRP) and then, the poly(ethyleneoxide) blocks were attached to the PVCL chain ends with click chemistry. The sizes, thermoresponsiviness, and colloidal stability of SiO₂‐PVCL and SiO₂‐PVCL‐b‐PEO particles and their aqueous dispersions were studied by scanning electron microscopy, turbidimetry, dynamic light scattering, zeta sizer, and microcalorimetry. The phase separation temperature of the PEO‐b‐PVCL grafted particles did not considerably differ from that of the SiO₂‐PVCL particles. The zeta potential of the grafted particles was close to zero at room temperature but decreased strongly upon heating. The decrease is related to the collapse of the PVCL blocks and correspondingly, the exposure of the silica surface toward the aqueous phase. The colloidal stability of the particles could be enhanced by adding PEO blocks to the chain ends of the PVCL grafts. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5012–5020     

SiO2/PE/ Bi2S3核壳结构纳米颗粒的合成与性能(英)

以多层电解质作为微型反应器，制备了SiO₂/ Polyelectrolyte(PE) / Bi₂S₃核壳纳米粒子。XRD结果表明Bi₂S₃颗粒属于正交晶系。由透射电镜和场发射扫描电镜照片可知，在直径为640 nm左右的SiO₂表面覆盖了厚度35 nm的Bi₂S₃壳层。红外光谱分析结果表明硅烷网络在结构上发生了变化(SiO₂表面的硅烷醇键沉积在Bi₂S₃的表面)。SiO₂核和SiO₂ / PE / Bi₂S₃的紫外-可见吸收光谱显示在900 nm存在典型吸收边。     

Synthesis of SiO2/poly(styrene‐co‐butyl acrylate) nanocomposite microspheres via miniemulsion polymerization

A series of SiO₂/poly(styrene‐co‐butyl acrylate) nanocomposite microspheres with various morphologies (e.g., multicore–shell, normal core–shell, and raspberry‐like) were synthesized via miniemulsion polymerization. The results showed that the morphology of the composite latex particles was strongly influenced by the presence or absence of the soft monomer (butyl acrylate), the particle sizes of the silica, and the emulsifier concentrations. The incorporation of the soft monomer helped in forming the multicore–shell structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3202–3209, 2006     

Electrorheological properties of carbon nanotube/polyelectrolyte self‐assembled polystyrene particles by layer‐by‐layer assembly

Sulfonated polystyrene (PS) particles were prepared by the sulfonation of PS microspheres with H₂SO₄. Then, composite particles were synthesized by layer‐by‐layer (LbL) self‐assembly with funtionalized multiwall carbon nanotubes (fMCNTs) and polyelectrolytes on sulfonated PS particles. The amount of fMCNTs on PS particles was adjusted by controlling the number of fMCNT layers by LbL self‐assembly. Composite particles were characterized by ζ‐potential analysis, scanning electron microscopy, and thermal analysis. The electrorheological (ER) properties of composite particles in insulating oil was investigated with varying the number of fMCNT layers under controlled electric fields. It was observed that the number of fMCNT layers was a critical factor to determine the ER properties of composite particles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1058–1065, 2008     

Structure–tribological property relationship of nanoparticles and short carbon fibers reinforced PEEK hybrid composites

In a previous work, the roles of low‐loading, that is, 1 vol %, nano‐SiO₂ particles on the tribological behavior of short carbon fibers (SCFs)/polytetrafluoroethylene (PTFE)/graphite filled polyetheretherketone (PEEK) were studied. In the present work, the effects of nanoparticle content, varying from 1 to 4 vol %, on the structure and the tribological performance of the composite was investigated. The polished cross sections of the composites were inspected using a scanning electron microscope (SEM). The incorporated nanoparticles significantly reduce the friction coefficients of the composite. With low pressure‐sliding velocity (pv) factors, nanoparticle agglomerates seem to exert an abrasive effect on SCF, and thereby lead to high wear rates. Under such conditions, an increase in nanoparticle content decreases the wear resistance. With high pv factors, the nanoparticles remarkably improve the wear resistance of the composite and the nanoparticle contents do not play an important role on the wear resistance. The worn surfaces, transfer films and wear debris of the composites were analyzed. The tribological mechanisms were discussed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 801–811, 2010