Propylene polymerization by C1‐symmetric {ONNO′}‐type salan zirconium complexes

The activities of C₁‐symmetric dibenzyl zirconium complexes of Salan ligands that bear a halo‐substituted phenolate ring and an alkyl‐substituted phenolate ring in propylene polymerization with methylaluminoxane as cocatalyst were studied. These {ONNO′}ZrBn₂‐type catalysts exhibited moderate‐to‐high activities and yielded polypropylene of low molecular weight. The degree of tacticity was found to depend on the steric bulk of the substituents on both phenolate rings and ranged from practically atactic to substantially isotactic (74–78% [mmmm] for polymerizations at room temperature by Lig⁵ZrBn₂). Hemi‐isotactic polypropylene was not obtained, despite the diastereotopicity of the two positions. The pattern of stereo errors was consistent with the enantiomorphic site control of propylene insertion typically observed for C₂‐symmetric catalysts and implied a facile site‐averaging mechanism. A regular 1,2‐insertion and a β‐H transfer to an incoming monomer correspond to the main propagation and termination processes, respectively. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Controlled Radical Polymerization Mediated by Amine–Bis(phenolate) Iron(III) Complexes

Tetradentate amine–bis(phenolate) iron(III) halide complexes containing chloro substituents on the aromatic ring are extremely efficient catalysts for controlled radical polymerization. Molecular weights are in good agreement with theoretical values and polydispersity indexes (PDIs) are as low as 1.11 for styrene and methyl methacrylate polymerizations. Complexes containing alkyl substituents on the aromatic ring are less efficient. Kinetic data reveal activity for styrene polymerization among the fastest reported to date and initial studies implicate a multimechanism system. Despite the highly colored polymerization media, simple work‐up procedures yield pure white polymers.     

Titanium and zirconium complexes containing modified TREN ligands for the polymerization of 1‐alkenes—A comparative study

The titanium and zirconium complexes in C₃ and C_s symmetric forms synthesized from corresponding aminotriols in combination with MAO polymerized 1‐hexene in a controlled manner. When the polymerization temperature was lowered, they gave high molecular weight monodisperse polyhexene with narrow polydispersities indicating quazi‐living systems. The isotactic polyhexene obtained from C₃ titanium catalyst has the molecular weight of around 46,500 with PDI of 1.3 and the hemi‐isotactic polymer from C_s titanium catalyst has the molecular weight of around 617,000 with PDI of 1.3. The analogues zirconium complexes upon activation with MAO polymerize hexene to give polyhexene having molecular weight of 53,000 (C₃) and 626,000 (pseudo‐C_s) with PDI ranging from 1.2 to 1.4. The MIX‐titanium catalyst prepared from the 50:50 mixture of aminotriols was also able to polymerize 1‐hexene and the GPC traces of the polyhexene suggests that even though the catalyst was formed from the mixture of aminotriols, the C₃ and C_s symmetry of the catalysts retain its originality avoiding the formation of aggregates or polymeric forms. When one of the arms of aminotriol was methylated yield C₂ and meso aminodiol ligands and their corresponding titanium and zirconium complexes gave higher molecular weight polyhexenes with lower PDI (C₂‐Zr‐M_n: 260,000; PDI: 1.05–1.10; mesoZr‐M_n: 220,000; PDI: 1.05–1.10) possibly suggesting that these systems are close to living systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5470–5479, 2007     

Reactivity of styrene and substituted styrenes in the presence of a homogeneous isospecific titanium catalyst

The isospecific polymerization of several para‐substituted styrenes was performed in the presence of the catalyst dichloro[1,4‐dithiabutanediyl‐2,2′‐bis(4,6‐di‐tert‐butyl‐phenoxy)]titanium activated by methylaluminoxane. All the polymers were highly regioregular and isotactic with narrow molecular weight distributions. The presence of electron‐donating substituents on the aromatic ring had a positive effect on the catalyst activity, whereas electron‐withdrawing substituents affected the polymerization activity negatively. Binary copolymerizations of the various substituted styrenes showed an inversion of the reactivity with respect to that observed in the homopolymerization. These results suggested that the last monomer unit of the polymer chain coordinated to the metal center, influencing the reactivity of the catalyst with respect to the incoming monomer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1486–1491, 2006     

Dramatic electronic effect of fluoro substituents on the olefin polymerization activity of mono β‐diiminato titanium complexes

A series of new mono β‐diiminato titanium complexes [(N(Ar)C(CH₃))₂ CH]TiCl₃ ( 3a : Ar = 2.6‐F₂C₆H₃; 3b : Ar = C₆F₅; 3c : Ar = 2.6‐Me₂C₆H₃) have been synthesized and characterized. The crystal structure of 3a revealed that the β‐diiminato ligand in our complex is more close to the η²‐coordination mode with little delocalization of the double bonds, which is different from the strong delocalization in the ligands of η⁵‐coordinated (Tolnacnac)TiCl₃ and η²‐coordinated (Dipnacnac)ZrCl₃. The significant electronic effects of fluoro‐substituents on the olefin polymerization activity of mono β‐diiminato titanium complexes were found. Titanium complexes with fluorine‐containing β‐diiminato ligands, on activation with MMAO, are extremely active catalysts for polymerization of ethylene. The activity of copolymerization of ethylene and 1‐hexene is higher than homopolymerization of ethylene and increases with the increase of 1‐hexene concentrations, which show the positive “comonomer effect.” The molar percentage of 1‐hexene incorporation and polymer microstructures can also be modulated by the initial comonomer concentrations. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 211–217, 2008     

Olefin polymerization by cyclopentadienyltris(dimethylamido)titanium(IV) complexes

Several titanium(IV) complexes of the type Cp′Ti(NMe₂)₃ [Cp′ = cyclopentadienyl ( 1 ), (dimethylaminoethyl)cyclopentadienyl ( 2 ), indenyl ( 3 ), and pentamethylcyclopentadienyl ( 4 )] were prepared, and their catalytic properties in the polymerization of α‐olefins were examined. Complexes 1 and 2 catalyzed the polymerization of ethylene in the presence of methylaluminoxane with a much higher activity than 3 or 4 . Complexes 3 and 4 polymerized ethylene with an activity similar to that of CpTiCl₃ ( 6 ). The preactivation of 2 , 3 , or 4 with trimethylaluminum (TMA) resulted in an increase in ethylene polymerization activities. Also, 1 and 2 were successfully used as ethylene/1‐hexene copolymerization catalysts, producing polymers with various amounts of 1‐hexene incorporation, depending on the amount of 1‐hexene in the feed mixture. Complex 1 likewise effectively polymerized styrene with a higher activity and higher syndiospecificity than the other three catalysts. Complexes 3 and 4 polymerized styrene with low syndiospecificity, whereas 2 produced only atactic polystyrene. The preactivation of 3 or 4 with TMA resulted in an increase in styrene polymerization activities and increased the syndiotacticity percentage of the polymers produced. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 313–319, 2001     

Ethylene/α‐olefin copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Copolymerizations of ethylene with α‐olefins (i.e., 1‐hexene, 1‐octene, allylbenzene, and 4‐phenyl‐1‐butene) using the bis(β‐enaminoketonato) titanium complexes [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ ( 1a : R₁ = CF₃, R₂ = CH₃; 1b : R₁ = Ph, R₂ = CF₃; and 1c : R₁ = t‐Bu, R₂ = CF₃), activated with modified methylaluminoxane as a cocatalyst, have been investigated. The catalyst activity, comonomer incorporation, and molecular weight, and molecular weight distribution of the polymers produced can be controlled over a wide range by the variation of the catalyst structure, α‐olefin, and reaction parameters such as the comonomer feed concentration. The substituents R₁ and R₂ of the ligands affect considerably both the catalyst activity and comonomer incorporation. Precatalyst 1a exhibits high catalytic activity and produces high‐molecular‐weight copolymers with high α‐olefin insertion. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6323–6330, 2005     

Electron transfer mechanism in olefin polymerization

Polymerization of olefins mediated by transition metal derivatives (Ziegler–Natta polymerization) is one of the most scientifically and industrially important processes of molecular conversion. Electron transfer mechanism could play a significant role in both heterogeneous and homogeneous catalysts. The catalytic activity strongly depends on the presence of two metallocene ligands attached to the transition metal (more commonly zirconium) which grants the valence form of zirconium in complexes of the type Cp₂ZrX₂(X=Cl or CH₃) followed by the formation of the (Cp₂ZrX)⁺ cation under the effect of a Lewis acid. On the other hand, Ti complexes with only one metallocene ligand give the syndiospecific polymerization of styrene, where the phenyl group appears to act as electron donor for the transition metal. The remarkable electronic effect of the metallocene groups in determining catalytic activity is demonstrated by the study of substituted metallocene ligands as well as other ligands around the metal. These effects cannot be, however, completely separated from steric effects which seem to be responsible for the impressive and versatile stereochemical control determined by symmetry properties of the transition metal complex.     

Tripodal imidazole containing ligands for copper catalyzed ATRP

Tripodal imidazole containing ligands, bis((2‐pyridyl)methyl)(1‐methylimidazole‐2‐yl)methyl)amine (BPIA) and bis(1‐methylimidazole‐2‐yl)methyl)((2‐pyridyl)methyl)amine (BIPA), were synthesized and used for copper catalyzed atom transfer radical polymerization (ATRP) of n‐butyl acrylate (nBA). The molecular weights of poly(n‐butyl acrylate) (PnBA) catalyzed by CuBr/BPIA and CuBr/BIPA complexes increased linearly with nBA conversions and they were close to theoretical values with low polydispersities. ATRP equilibrium rate constant (K_ATRP) measurements showed that bothCuBr/BPIA and CuBr/BIPA complexes had high K_ATRP values, similar to that of CuBr/tri(2‐pyridylmethyl)amine (TPMA), which is one of the ATRP most active ligands. Activators regenerated by electron transfer (ARGET) ATRP of nBA with CuBr₂/BPIA and CuBr₂/BIPA complexes were also conducted and polymerization reached high nBA conversions, resulting in PnBA with low polydispersities. This suggests that the copper complexes with BPIA and BIPA were sufficiently stable and active to conduct ATRP when catalyst concentration was low. ARGET ATRP to form high molecular weight PnBA with CuBr₂/BPIA and CuBr₂/BIPA complexes was also successful. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2015–2024, 2008     

Ethylene polymerization with FI complexes having novel phenoxy‐imine ligands: Effect of metal type and complex immobilization

A series of bis(phenoxy‐imine) vanadium and zirconium complexes with different types of R³ substituents at the nitrogen atom, where R³ = phenyl, naphthyl, or anthryl, was synthesized and investigated in ethylene polymerization. Moreover, the catalytic performance was verified for three supported catalysts, which had been obtained by immobilization of bis[N‐(salicylidene)‐1‐naphthylaminato]M(IV) dichloride complexes (M = V, Zr, or Ti) on the magnesium carrier MgCl₂(THF)₂/Et₂AlCl. Catalytic performance of both supported and homogeneous catalysts was verified in conjunction with methylaluminoxane (MAO) or with alkylaluminium compounds (Et_nAlCl_3?n, n = 1–3). The activity of FI vanadium and zirconium complexes was observed to decline for the growing size of R³, whereas the average molecular weight (MW) of the polymers was growing for larger substituent. Moreover, vanadium complexes exhibited the highest activity with EtAlCl₂, whereas zirconium ones showed the best activity with MAO. All immobilized systems were most active in conjunction with MAO, and their activities were higher than those for their homogeneous counterparts, and they gave polymers with higher average MWs. That effect was in particular evident for the titanium catalyst. The vanadium complex 3 was also a good precursor for ethylene/1‐octene copolymerization; however, its immobilization reduced its potential for incorporation of a comonomer into a polyethylene chain. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Bis(β‐ketoamino)copper(II)/methylaluminoxane systems for homo‐ and copolymerizations of methyl acrylate and 1‐hexene

Two bis(β‐ketoamino)copper [ArNC(CH₃)CHC(CH₃)O]₂Cu ( 1 , Ar = 2,6‐dimethylphenyl; 2 , Ar = 2,6‐diisopropylphenyl) complexes were synthesized and characterized. Homo‐ and copolymerizations of methyl acrylate (MA) and 1‐hexene with bis(β‐ketoamino)copper(II) complexes activated with methylaluminoxane (MAO) were investigated in detail. MA was polymerized in high conversion (>72%) to produce the syndio‐rich atactic poly(methyl acrylate), but 1‐hexene was not polymerized with copper complexes/MAO. Copolymerizations of MA and 1‐hexene with 1 , 2 /MAO produced acrylate‐enriched copolymers (MA > 80%) with isolated hexenes in the backbone. The calculation of reactivity ratios showed that r(MA) is 8.47 and r(hexene) is near to 0 determined by a Fineman‐Ross method. The polymerization mechanism was discussed, and an insertion‐triggered radical mechanism was also proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1113–1121, 2010     

TREN versus Me6‐TREN as ligands in SET‐LRP of methyl acrylate

The commercially available tris(2‐aminoethyl)amine (TREN) was used as ligand to mediate the single‐electron transfer‐living radical polymerization (SET‐LRP) of methyl acrylate in dimethyl sulfoxide initiated with the bifunctional initiator bis(2‐bromopropionyl)ethane and catalyzed by both nonactivated and activated Cu(0) wire. A comparative study between TREN and tris(2‐dimethylaminoethyl)amine (Me₆‐TREN) ligand, that is more commonly used in SET‐LRP, demonstrated that TREN provided a slower polymerization but the chain‐ends functionality of the resulting bifunctional poly(methyl acrylate) was near quantitative and comparable to that obtained when Me₆‐TREN was used as a ligand. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012.     

Diamine bis(phenolate) and pendant amine bis(phenolate) ligands: catalytic activity for the room temperature palladium‐catalyzed Suzuki–Miyaura coupling reaction

A series of amine bis(phenolate) ligands bearing aryl substituents of varying steric bulk are reported and characterized using single‐crystal X‐ray diffraction, NMR spectroscopy and high‐resolution mass spectrometry experiments. Palladium complexes derived in situ from these ligands are evaluated as catalysts for the Suzuki–Miyaura coupling of phenylboronic acid and aryl bromides. High conversions are observed for these reactions in methanol solvent at low catalyst loadings (0.01 mol%), short reaction times (30 min) and mild temperatures (30°C). Conversion is observed for a range of substrates, and is found to depend on the nature of the external base and solvent employed. These findings demonstrate the utility of catalysts derived from late transition metal complexes of amine bis(phenolate) ligands, particularly those bearing bulky cumyl substituents. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and characterization of a silyl substituted bis(indenyl) zirconium dichloride and comparison of its olefin polymerization behavior to a siloxy substituted analogue

The synthesis and characterization of rac‐[ethylenebis(1‐(tert‐butyldimethylsilyl)‐3‐indenyl)]zirconium dichloride ( 3 ) is reported. The silyl substituted 3 /MAO was compared to its siloxy substituted analogue ( 4 ) in ethylene homo‐ and in ethylene‐1‐hexene copolymerizations to elucidate the effect of the heteroatom on polymerization performance. The influence of monomer and cocatalyst concentration and the polymerization temperature was investigated. The oxygen between the indenyl ligand and the bulky tert‐butyldimethylsilyl group in the siloxy substituted 4 /MAO was found to have a positive influence on polymerization activity and copolymerization performance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 127–133, 2001     

Synthesis and characterization of bis(indenyl) zirconium aryloxide derivatives and their use in α‐olefin polymerization

A series of new bis(indenyl) zirconium diaryloxides of general formula Ind₂Zr(OL)₂ (L = C₆H₅, 2 ; C₆F₅, 3 ; 2,6‐Me₂C₆H₃, 4; 2,4,6‐Me₃C₆H₂, 5 ; 4‐^tBuC₆H₄, 6 ) were synthesized by a metathesis reaction of Ind₂ZrCl₂ ( 1 ) with the appropriate thallium aryloxide salt, TlOL. The complexes 1–6 were characterized by ¹H and ¹³C NMR techniques. They were also examined as catalysts for ethene and 1‐hexene polymerization with methylalumoxane as co‐catalyst, and a trend of the polymerization activity as a function of aryloxide ligands was observed. An interpretation of this trend, considering both the electronic and steric effects of the substituents on the aryloxide rings, was proposed. Copyright © 2001 John Wiley & Sons, Ltd.     

Kinetic features of ethylene polymerization over supported catalysts [2,6‐bis(imino)pyridyl iron dichloride/magnesium dichloride] with AlR3 as an activator

The effects of polymerization temperature, polymerization time, ethylene and hydrogen concentration, and effect of comonomers (hexene‐1, propylene) on the activity of supported catalyst of composition LFeCl₂/MgCl₂‐Al(i‐Bu)₃ (L = 2,6‐bis[1‐(2,6‐dimethylphenylimino)ethyl] pyridyl) and polymer characteristics (molecular weight (MW), molecular‐weight distribution (MWD), molecular structure) have been studied. Effective activation energy of ethylene polymerization over LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a value typical of supported Ziegler–Natta catalysts (11.9 kcal/mol). The polymerization reaction is of the first order with respect to monomer at the ethylene concentration >0.2 mol/L. Addition of small amounts of hydrogen (9–17%) significantly increases the activity; however, further increase in hydrogen concentration decreases the activity. The IRS and DSC analysis of PE indicates that catalyst LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a very low copolymerizing ability toward propylene and hexene‐1. MW and MWD of PE produced over these catalysts depend on the polymerization time, ethylene and hexene‐1 concentration. The activation effect of hydrogen and other kinetic features of ethylene polymerization over supported catalysts based on the Fe (II) complexes are discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5057–5066, 2007     

Highly Stereocontrolled Ring‐Opening Polymerization of Racemic Alkyl β‐Malolactonates Mediated by Yttrium [Amino‐alkoxy‐bis(phenolate)] Complexes

Yttrium [amino‐alkoxy‐bis(phenolate)]amido complexes have been used for the ring‐opening polymerization (ROP) of racemic alkyl β‐malolactonates (4‐alkoxycarbonyl‐2‐oxetanones, rac‐MLA^Rs) bearing an allyl (All), benzyl (Bz) or methyl (Me) lateral ester function. The nature of the ortho‐substituent on the phenolate rings in the metal ancillary dictated the stereocontrol of the ROP, and consequently the syndiotactic enrichment of the resulting polyesters. ROP promoted by catalysts with halogen (Cl, Br)‐disubstituted ligands allowed the first reported synthesis of highly syndiotactic PMLA^Rs (P_r ≥ 0.95); conversely, catalysts bearing bulky alkyl and aryl ortho‐substituted ligands proved largely ineffective. All polymers have been characterized by ¹H and ¹³C{¹H} NMR spectroscopy, MALDI‐ToF mass spectrometry and DSC analyses. Statistical and thermal analyses enabled the rationalization of the chain‐end control mechanism. Whereas the stereocontrol of the polymerization obeyed a Markov first‐order (Mk1) model for the ROP of rac‐MLA^Bz and rac‐MLA^All, the ROP of rac‐MLA^Me led to a chain end‐control of Markov second‐order type (Mk2). DFT computations suggest that the high stereocontrol ability featured by catalysts bearing Cl‐ and Br‐substituted ligands does not likely originate from halogen bonding between the halogen substituent and the growing polyester chain.     

Titanium tetrachloride supported on atom transfer radical polymerized poly(methyl acrylate‐co‐1‐octene) as catalyst for ethylene polymerization

Ethylene polymerizations were performed using catalyst based on titanium tetrachloride (TiCl₄) supported on synthesized poly(methyl acrylate‐co‐1‐octene) (PMO). Three catalysts were synthesized by varying TiCl₄/PMO weight ratio in chlorobenzene resulting in incorporation of titanium in different percentage as determined by UV‐vis spectroscopy. The coordination of titanium with the copolymer matrix was confirmed by FTIR studies. The catalysts morphology as observed by SEM was found to be round shaped with even distributions of titanium and chlorine on the surface of catalyst. Their performance was evaluated for atmospheric polymerization of ethylene in n‐hexane using triethylaluminum as cocatalyst. Catalyst with titanium incorporation corresponding to 2.8 wt % showed maximum activity. Polyethylenes obtained were characterized for melting temperature, molecular weight, morphology and microstructure. The polymeric support utilized for TiCl₄ was synthesized using activators regenerated by electron transfer (ARGET) Atom Transfer Radical Polymerization (ATRP) of methyl acrylate (MA) and 1‐octene (Oct) with Cu(0)/CuBr₂/tris(2‐(dimethylamino)ethyl)amine (Me₆TREN) as catalyst and ethyl 2‐bromoisobutyrate (EBriB) as initiator at 80 °C. The copolymer poly(methyl acrylate‐1‐octene; PMO) obtained showed monomodal curve in Gel Permeation Chromatography (GPC) with polydispersity of 1.37 and copolymer composition (¹H NMR; F_MA) of 0.75. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7299–7309, 2008     

Ethene homopolymerization and copolymerization with 1‐hexene for all methyl‐substituted (RnC5H5−n)2ZrCL2/MAO catalytic systems: Effects of split methyl substitution

Ethene homopolymerization and copolymerization with 1‐hexene were catalyzed by methyl‐substituted cyclopentadienyl (Cp) zirconium dichlorides, (R_n C₅H_5−n)₂ZrCl₂ (R_n = H, Me, 1,2‐Me₂, 1,3‐Me₂, 1,2,3‐Me₃, 1,2,4‐Me₃, Me₄, or Me₅), and methylaluminoxane. The polymers were characterized with Fourier transform infrared, nuclear magnetic resonance, gel permeation chromatography, and differential scanning calorimetry techniques. Generally, an increasing number of methyl substituents on the Cp ligand results in lower 1‐hexene incorporation in the copolymer. The two catalysts with split methyl substitution (R_n = 1,3‐Me₂ and R_n = 1,2,4‐Me₃) show a higher comonomer response than their disubstituted and trisubstituted counterparts (R_n = 1,2‐Me₂ and R_n = 1,2,3‐Me₃). They even incorporate more 1‐hexene than R_n = H and R_n = Me. These findings are qualitatively in agreement with the results of a theoretical study based on density functional calculations. The presence of comonomer does not influence the termination reactions after the insertion of ethene. There is more frequent termination after each hexene insertion with increasing comonomer incorporation except for the two catalysts with split methyl substituents. The termination probability per inserted comonomer is highest for the less substituted catalysts. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3161–3172, 2000     

Olefin Polymerization Catalyzed by Double‐Decker Dipalladium Complexes: Low Branched Poly(α‐Olefin)s by Selective Insertion of the Monomer Molecule

Dipalladium complexes of a cyclic bis(diimine) ligand with a double‐decker structure catalyze polymerization of ethylene and α‐olefins and copolymerization of ethylene with 1‐hexene. The polymerization of 1‐hexene yields a polymer that is mainly composed of the hexamethylene unit formed by 2,1‐insertion of the monomer into the palladium–carbon bond, followed by chain‐walking (6,1‐insertion). The polymerization of 4‐methyl‐1‐pentene proceeds by 2,1‐insertion with a selectivity of 92–97 %, and affords the polymer with methyl and 2‐methylhexyl branches. 2,1‐Insertion occurs selectively in all of the polymerization reactions of α‐olefins catalyzed by the dipalladium complexes. Ethylene polymerization with the catalyst at 100 °C lasts over 24 h, whereas the monopalladium–diimine catalyst loses its activity within 8 h at 60 °C. Polyethylene obtained by the dipalladium catalyst is less‐branched and has a higher molecular weight compared to that of the monopalladium catalyst under the same conditions. Copolymerization of ethylene with 1‐hexene affords solid products with melting points and molecular weights that vary depending on the polymerization time, suggesting formation of a block and/or gradient copolymer.