Fluorous mixture synthesis of two libraries with hydantoin-, and benzodiazepinedione-fused heterocyclic scaffolds

Diversity-oriented synthesis (DOS) and fluorous mixture synthesis (FMS) are two aspects of combinatorial chemistry. DOS generates library scaffolds with skeletal, substitution, and stereochemistry variations, whereas FMS is a highly efficient tool for library production. The combination of these two aspects in solution-phase synthesis of two novel heterocyclic compound libraries is presented in this paper. Mixtures of different fluorous amino acids undergo [3 + 2] cycloadditions followed by postcondensation reactions. The mixtures are then demixed by fluorous HPLC. Fluorous tags are removed by cyclization to afford hydantoin- and benzodiazepinedione-fused heterocyclic compounds as individual, pure, and structurally defined molecules. The application of MS-directed HPLC purification and parallel four-channel LC/MS analysis further increases the efficiency of FMS.     

Synthesis of all 16 stereoisomers of pinesaw fly sex pheromones--tools and tactics for solving problems in fluorous mixture synthesis

[Reaction: see text]. The application of fluorous mixture synthesis (FMS) for accessing natural products and their stereoisomers was validated by the total synthesis of all 16 stereoisomers of the pine sawfly sex pheromone. Four fluorous p-methoxybenzyl groups were used as tags, and a "4-mix-4-split" approach was employed in a divergent synthesis. This paper presents the details of the FMS of pine sawfly sex pheromones with an emphasis on identification and solving of problems encountered when working with fluorous mixtures.     

Fluorous mixture synthesis of stereoisomer libraries: total syntheses of (+)-murisolin and fifteen diastereoisomers

The synthesis of a stereoisomer library of 16 murisolins in individual pure form by fluorous mixture synthesis is reported. Four stereoisomeric precursors are tagged with different fluorous tags, and the resulting mixture is taken through the synthesis with four splits and late stage demixing and detagging to give all 16 products. These products exhibit only six different sets of NMR spectra, but all can be differentiated by chiral HPLC. The structure of murisolin is confirmed, but the structures of murisolin A and 16,19-cis-murisolin may never be known with certainty because insufficient data were collected on natural samples to differentiate each of them from one other isomer.     

Solution-phase preparation of a 560-compound library of individual pure mappicine analogues by fluorous mixture synthesis

Solution-phase mixture synthesis has efficiency advantages and favorable reaction kinetics. Applications of this technique, however, have been discouraged by the difficulty in obtaining individual, pure final products by using conventional separation and identification processes. Introduced here is a new strategy for mixture synthesis that addresses the separation and identification problems. Members of a series of organic substrates are paired with a series of fluorous tags of different chain lengths. The tagged starting materials are then mixed and taken through a multistep reaction process. Fluorous chromatography is used to demix the tagged product mixtures on the basis of the fluorine content of the tags to provide the individual pure components of the mixture, which are detagged to release the final products. The utility of fluorous mixture synthesis is demonstrated by the preparation of a 560-membered library of analogues of the natural product mappicine. A seven-component mixture is carried through a four-step mixture synthesis (two one-pot and two parallel steps) to incorporate two additional points of diversity onto the tetracyclic core. Methods for analysis and purification of the intermediates are established for the quality control of the mixture synthesis.     

Synthesis and spectroscopic properties of finite Ph2N-containing oligo(arylenevinylene) derivatives that emit blue to red fluorescence

[structure: see text] A series of oligo(phenylenevinylene) (OPV) derivatives with finite conjugation units were prepared in short steps from few building blocks. The central and terminal aryl groups of these OPV dyes contain cyano and Ph(2)N substituents, respectively, which affect color of fluorescence. The wavelength ranges from 472 nm (blue) to 614 nm (red) depending on the position of the cyano group.     

Combinatorial synthesis of oligo(phenylene ethynylene)s

The combinatorial synthesis of oligo(phenylene ethynylene) tetramers, both in solution and on solid support, is described. These products are of interest for molecular electronics applications. An iterative sequence, coupling of aryl halides to alkynes under Sonogashira conditions, was used. Five monomers functionalized with electron-donating or electron-withdrawing groups were synthesized, and used to generate a library of 25 trimers in a solution-phase based process. A library of 24 tetramers was prepared by subsequent protodesilylation and coupling with the alligator clip 4-iodo-1-thioacetylbenzene. The solution-phase based sequence was successfully adapted to a higher yielding directed split-and-pool solid-phase process, with average yields of 78–86% for each step over seven steps. A triazene linker group was used to attach the starting monomer to the polymer beads. At the completion of the solid-phase-based process, traceless cleavage of trimers from the resin was achieved by sonication of the resin in 10% HCl/THF solution. The released products were then poised for the final step in the sequence, attachment of the alligator clip.     

Separation of "light fluorous" reagents and catalysts by fluorous solid-phase extraction: synthesis and study of a family of triarylphosphines bearing linear and branched fluorous tags

Practical syntheses of new triarylphosphines bearing both linear and branched fluorous tags (Rf) are reported. The phosphines have one, two, or all three aryl rings bearing fluorous tags: (Ph)(3)(-)(n)()P(C(6)H(4)(CH(2))(m)()Rf)(n)(). Fluorous-organic partition coefficients have been measured and the retention properties of both the phosphines and the derived phosphine oxides on fluorous reverse phase silica have been studied. While applications relying on liquid-liquid extractive separations of these phosphines may be limited to those bearing three fluorous chains, the technique of solid phase extraction should be broadly applicable to phosphines, phosphine oxides, and derived metal complexes. A parallel platinum-catalyzed allylation of aldehydes with fluorous allyl stannanes illustrates the usefulness of the new fluorous ligands in small-scale synthesis.     

Recyclable benzyl-type fluorous tags: Preparation and application in oligosaccharide synthesis

We herein described the design, synthesis and application of two recyclable benzyl-type fluorous tags with double fluorous chains. The benzyl-type fluorous tags were prepared in 3 steps from a commercially available fluorous alcohol. The glycosylation of the benzyl-type tags with imidate donors proceeded smoothly to provide the corresponding fluorous-tagged carbohydrates in good to excellent yields, which were readily purified by fluorous solid-phase extraction(FSPE). Efficient removal of the tags from tagtethered carbohydrates were conducted under the common catalytic hydrogenation condition and the initial benzyl-type fluorous tags could be regenerated [5_TD$IF]via a 2-step simple procedure in 69%–93% yields.The utility of the new benzyl-fluorous tag was demonstrated [7_TD$IF]via the FSPE-assisted synthesis of oligosaccharides Gb3.     

A condition variation study for radioiodination via triazene intermediates

Pyrrolidyl triazenes prepared by interception of the diazonium transient in the Sandmeyer reaction of amines can serve as useful intermediates in the iodination and radioiodination of aryl rings. Decomposition of such triazenes in the presence of iodide is acid-catalyzed and is sensitive to choice of solvent, acid, and triazene structure. A condition variation study by HPLC of four different solvent systems and two non-nucleophilic acids was carried out on the¹²³I iodination of the triazenes of p-nitroaniline, p-anisidine and p-toluidine. This method has proven useful in radiolabeling of two pharmaceutical analogs which were not amenable to labeling through the classic Sandmeyer method.     

Fluorous mixture synthesis of 4-alkylidene cyclopentenones via a rhodium-catalyzed [2+2+1] cycloaddition of alkynyl allenes

Fluorous mixture synthesis was used to prepare a library of 4-alkylidene cyclopentenones starting from a mixture of four alpha-amino acid derivatives tagged with different fluorous benzyl carbamates ((F)CBz) of varying fluorine content. The amino acids were converted to the corresponding propargyl esters and then subjected to an ester-enolate Claisen rearrangement to give a mixture of allenic amino esters. The allenes were then split four ways and propargylated with different propargyl bromides to give four mixtures of alkynyl allenes. The 4-alkylidene cyclopentenones were formed by a formal [2+2+1] cycloaddition of the alkynyl allenes using catalytic [Rh(CO)2Cl]2 under CO atmosphere. Demixing by fluorous preparative HPLC, removal of the fluorous benzyl carbamates, and then exposure to HCl/ether gave the hydrochloride salts of 16 compounds as diastereomeric mixtures in 69-99% purity. Thus, after just 26 chemical steps, a library of 16 cyclopentenones was prepared by using fluorous mixture synthesis. By comparison, the same library would have required 112 steps if each compound were made individually by parallel synthesis.     

A Comparative Study of the Modification of Gold and Glassy Carbon Surfaces with Mixed Layers of In Situ Generated Aryl Diazonium Compounds

In situ generated aryl diazonium cations were synthesized in the electrochemical cell by reaction of the corresponding amines with NaNO₂ in aqueous HCl. This paper reports a study of the formation of mixed layers from in situ generated aryl diazonium cations. Firstly, glassy carbon (GC) and gold electrode surfaces were modified with five single in situ generated aryl diazonium salts to obtain their corresponding reductive potential followed by the modification of GC and gold surfaces with eight binary mixed layers of in situ generated aryl diazonium salts. The difference between GC and gold surfaces in terms of in situ formation of two‐component aryl diazonium salt films was compared. The behavior of the mixed layers formed from in situ generated aryl diazonium salts relative to diazonium salts that were pre‐synthesized prior to surface modification was also investigated. Cyclic voltammetry and X‐ray photoelectron spectroscopy were used to characterize the resulting modified GC and gold surfaces. It is found that for some aryl diazonium salts the potential at which reductive adsorption is achieved on gold and GC surfaces is significantly different. For the eight sets of binary mixed layers, the species with more anodic potential are more difficult to attach to the both GC and gold surfaces. The behavior of the mixed layers formed from in situ generated aryl diazonium salts and the pre‐synthesized diazonium salts is similar; which emphasizes the advantage of the in situ approach without any apparent difference in behavior to the presynthesized diazonium salts.     

Time-of-flight secondary ion mass spectroscopy characterization of the covalent bonding between a carbon surface and aryl groups

Grafting of aryl layers derived from aryl diazonium salts onto glassy carbon electrodes is observed by time-of-flight secondary ion mass spectroscopy (ToF-SIMS). The grafting occurs spontaneously when a glassy carbon plate is immersed into a solution of aryl diazonium salt and can be enhanced by biasing the carbon plate at a potential a little more negative than the diazonium salt reduction. C-C and C-O covalent bonding are believed to be responsible for the strong attachment of these layers onto the carbon substrate. Fragments containing aryl dimers, trimers, or tetramers are also observed. A mechanism is proposed to account for the formation of these polymeric chains.     

Synthesis of Functionalized o‐, m‐, and p‐Terphenyl Derivatives by Consecutive Cross‐Coupling Reactions of Triazene‐Substituted Arylboronic Esters

Triazene‐substituted arylboronic esters were prepared readily from the corresponding aryl magnesium derivatives and shown to function as a new class of donor–acceptor‐substituted coupling reagents. The selective functionalization of these aromatic derivatives led to a wide variety of terphenyl derivatives in which the original bifunctional unit (often further substituted with another functional group) formed the central aromatic ring. The functionalized terphenyl derivatives were formed in two efficient cross‐coupling steps from the triazene‐substituted boronic esters: Suzuki cross‐coupling with an aryl halide was followed by BF₃?OEt₂‐induced palladium‐catalyzed coupling of the diazonium salt generated in situ from the triazene with an arylboronic acid.     

Structure assignment of lagunapyrone B by fluorous mixture synthesis of four candidate stereoisomers

Techniques of fluorous mixture synthesis have been used to make four candidate stereoisomers for the natural product lagunapyrone B. A quasiracemic mixture of vinyl iodides whose component configurations at C19-21 were encoded by fluorous silyl groups was fused to a central fragment by a Negishi coupling. A separate quasiracemic mixture of pyrone fragments whose component configurations at C6,7 were also encoded by fluorous silyl groups was synthesized and demixed. Stille coupling of the resulting pure quasienantiomers with the quasiracemic mixture provided two quasi-diastereomeric samples, which were demixed and detagged to provide all four lagunapyrone B stereoisomers. Lagunapyrone was assigned the 6R,7S,19S,20S,21R configuration by comparison of optical rotations.     

Towards oligosaccharide library synthesis by fluorous mixture method

The synthesis of an oligosaccharide library by a fluorous tag method is reported here. Several acceptors and donors were mixed and glycosylated. The reaction mixture was purified by chromatography over fluorous HPLC to provide disaccharides in order of increasing fluorine content of the tag. This method could be applied to oligosaccharide libraries consisting of two sets of structural isomers.     

A convenient method for the preparation of fluorous tin derivatives for the fluorous labeling strategy

A convenient method for the preparation of fluorous aryl stannanes was developed as a means of expanding the general utility of the fluorous labeling strategy (FLS). Following the synthesis of a novel fluorous distannane, a palladium-catalyzed cross-coupling reaction was used to prepare the target compounds from aryl halides. The scope of the reaction was investigated by preparing a small library of model compounds where the reaction yields were similar to those reported for the analogous procedures employing hexamethyl- or hexabutyldistannanes. The utility of the reported methodology was demonstrated through the successful synthesis of fluorous precursors to two established molecular imaging and therapy agents (FIAU, IUdR). These were radiolabeled with iodine-125 and the desired products isolated in high yield and effective specific activity.     

Solid-phase synthesis of monocyclic beta-lactam derivatives

Liquid-phase studies concerning the solid-phase synthesis of monocyclic beta-lactams via the ester-enolate imine condensation route have been conducted utilizing triazene esters 1 and 2 as model compounds. Esters were attached to benzylamine resin 6 by a triazene linker employing the respective diazonium salts. Immobilized ester-enolates 8 and 10 were reacted with various imines and imine precursors to give polymer-bound beta-lactams 14 and 17 in different substitution patterns. Traceless cleavage from the triazene linker yields the desired beta-lactams 16 and 19.     

The Electrochemical Grafting of a Mixture of Substituted Phenyl Groups at a Glassy Carbon Electrode Surface

Two‐component substituted aryl groups are simultaneously grafted onto the surface of a glassy carbon electrode by electrochemical reduction of a binary mixture of two aryl diazonium salts in acetonitrile. The electrochemical deposition is achieved potentiostatically and two different mixtures with four different ratios of diazonium salts are used. The binary mixtures comprise: 1) 4‐nitrophenyl diazonium and 4‐bromophenyl diazonium cations and 2) 4‐bromophenyl diazonium and N,N‐diethylaniline diazonium cations. The chemical composition of the two component films is determined by cyclic voltammetry in an electrolyte inert for electroactive groups such as nitrophenyl and bromophenyl. X‐ray photoelectron spectroscopy is also used to evaluate the surface concentration of each grafted substituted phenyl group. The surface concentration of the substituted phenyl group for which the corresponding diazonium cation is the most easily reduced is higher than its concentration in the mixture of the deposition solution. The usefulness of binary films is also discussed.     

Solution-phase parallel synthesis with oligoethylene glycol sorting tags. Preparation of all four stereoisomers of the hydroxybutenolide fragment of murisolin and related acetogenins

The principles of the oligoethylene glycol (OEG) mixture synthesis are illustrated with the synthesis of all four possible stereoisomers of a hydroxybutenolide fragment common to murisolin and many other acetogenins. Modified dimethoxybenzyl groups with varying numbers of OEG units (-CH2CH2O-) are used to protect alcohols and serve as codes for configurations at two stereocenters. The encoded isomers are carried through several steps in a sequence of mixing prior to the reaction and then demixing during the separation to give individual pure products. A new tagging scheme is introduced in which a stereocenter bearing a hydroxy group is given two different tags. These initially redundant tags then serve to encode the configuration of another (untagged) stereocenter by appropriate pairwise reactions of the tagged precursors. The experimental features (reaction, analysis, separation, and characterization) of OEG mixture synthesis are detailed and are compared to and contrasted with those of fluorous mixture synthesis.     

Synthesis and Characterization of Pentafluorophenyl‐Substituted Perylenebis(dicarboximides)

A series of 1,7‐bis(perfluorophenyl)substituted perylenebis(dicarboximides) were synthesized by Cu‐mediated Ullmann coupling of bromopentafluorobenzene with 1,7‐dibromoperylenebis(dicarboximides) (Scheme). The photophysical and electrochemical properties of these dyes were investigated with regard to their potential use as building blocks in organic photovoltaics (OPV) or organic field‐effect transistors (OFET).