血红蛋白模拟过氧化物酶催化反应体系的极谱分析

用极谱分析法研究了血红蛋白催化H2O2氧化邻苯二胺(OPD)的反应体系.血红蛋白具有类似过氧化物酶的功能,它能够催化OPD-H2O2的反应生成一种具有电化学活性的产物,该产物在滴汞电极上-0.64V(vs.SCE)产生一个峰形良好的极谱还原峰.优化了血红蛋白的催化反应条件和催化反应产物的极谱测定条件 在最佳条件下,该体系可用于血红蛋白含量的测定,线性范围为2.0×10-9～2.0×10-7mol/L,检测限为1.0×10-9mol/L;也可用于痕量H2O2的测定,线性范围为1.0×10-6～2.0×10-4mol/L,检测限为1.0×10-6mol/L.     

Hydrogen Peroxide Sensor Based on Hemoglobin Immobilized on Glassy Carbon Electrode with SiO2 Nanoparticles/Chitosan Film as Immobilization Matrix

Abstract

A novel amperometric sensor of hydrogen peroxide was constructed. Hemoglobin (Hb) was successfully immobilized on nanometer‐sized SiO₂, which was supported by chitosan. Chitosan was acted as dispersant. The determination of hydrogen peroxide was performed in the presence of an electron mediator hydroquinone. Hb immobilized on the SiO₂/chitosan composite film displayed excellent electrocatalytical activity to the reduction of H₂O₂. The linear range of detection towards H₂O₂ was from 6.25×10^?7 to 1.63×10^?4mol/L with a detection limit of 1.8×10^?7mol/L (S/N=3). The apparent Michaelis‐Menten constant (K ^app _M) was found to be 0.75mmol/L.     

Stopped-flow spectrophotometric determination of hydrogen peroxide with hemoglobin as catalyst

A rapid and sensitive method was proposed for the determination of hydrogen peroxide based on the catalytic effect of hemoglobin using o-phenylenediamine as the substrate. Stopped-flow spectrophotometric method was used to study the kinetic behavior of the oxidation reaction. The catalytic effectiveness of hemoglobin was compared with other four kinds of catalysts. The initial rate of the formation of the reaction product 2,3-diaminophenazine at the wavelength of 425 nm was monitored, permitting a detection limit of 9.2x10(-9) mol/l H(2)O(2). A linear calibration graph was obtained over the H(2)O(2) concentration range 5.0x10(-8)-3.5x10(-6) mol/l, and the relative standard deviation at a H(2)O(2) concentration of 5.0x10(-7) mol/l was 2.08%. Satisfied results were obtained in the determination of H(2)O(2) in real samples by this method.     

Determination of oxytetracycline in urine and human serum by differential pulse polarography

Summary A differential pulse polarographic method for the determination of oxytetracycline in urine and human serum in acid media (HClO₄ of pH 2) is proposed. The effects of the amount of sample taken and the concentration of HClO₄ present were investigated. The detection limit was 5.5×10^–6 mol/l. The standard deviation of the determination of 5.5×10^–5 mol/l of oxytetracycline in 2 ml of urine was 1.7×10^–6 mol/l and that of the determination of 5.5×10^–5 mol/l of oxytetracycline in 2 ml of human serum was 1.9×10^–6 mol/l.

---

Bestimmung von Oxytetracyclin in Urin und Humanserum durch Differential-Pulspolarography

     

Catalytic Kinetic Determination of Trace Amounts of Iron(III) With Polarographic Detection

Abstract

This method is based on the catalytic effect of Fe³⁺ on the oxidation reaction between Acid Chrome Blue K and potassium bromate in sulfuric acid medium at 100deg;C, and in 0.08 mol/L NH₄OH - 0.01 mol/L (NH₄)₂ SO₄ supporting electrolyte, Acid Chrome Blue K exhibits a sensitive polarographic wave at -0.55V vs. SCE, and change of concentration is traced by a polarographic detection technique. The linear range of Fe³⁺ is 10–100ng/mL. This new catalytic method has been applied to the determination of iron in natural water and food with satisfactory results.     

A hydrogen peroxide biosensor based on Langmuir-Blodgett technique: Direct electron transfer of hemoglobin in octadecylamine layer

The present paper describes the modification of hemoglobin (Hb)-octadecylamine (ODA) Langmuir-Blodgett (LB) film on a gold electrode surface to develop a novel electrochemical biosensor for the detection of hydrogen peroxide. Atomic force microscopy (AFM) image of Hb-ODA LB film indicated Hb molecules existed in ODA layer in a well-ordered and compact form. The immobilized Hb displayed a couple of stable and well-defined redox peaks with an electron transfer rate constant of 4.58 ± 0.95 s⁻¹ and a formal potential of −185 mV (versus Ag/AgCl) in phosphate buffer (1.0 mM, pH 5.0) contain 0.1 M KCl at a scan rate of 200 mV s⁻¹, characteristic of Hb heme Fe(III)/Fe(II) redox couple. The formal potential of Hb heme Fe(III)/Fe(II) redox couple in ODA film shifted linearly between pH 5 and 8 with a slope of −23.8 mV pH⁻¹, suggesting that proton took part in electrochemical reaction. The ODA could accelerate the electron transfer between Hb and the electrode. This modified electrode showed an electrochemical activity to the reduction of hydrogen peroxide (H₂O₂) without the aid of any electron mediator.     

Polarographic study of a benzodiazepinooxazole: Oxazolam

Summary The polarographic behaviour of 10-chloro-2,3, 7,11b-tetrahydro-2-methyl-11b-phenyloxazolo-[3,2-d][1,4]-benzodiazepin-6(5H)-one (Oxazolam) was studied in the pH range 1–12. The reduction processes of Oxazolam and its hydrolysis product are irreversible and their currents are predominantly diffusion-controlled. The linear relationship between current and Oxazolam concentration in sulphuric acid medium permits its polarographic determination up to 6.08×10^–5 mol/l. The detection limit was 1.52×10^–7 mol/l (50 ppb). The reproducibility of the method in terms of relative standard deviation was 1.74% and 1.85% for ten determinations at 1.48×10^–5 mol/l and 1.37×10^–6 mol/l levels, respectively. The method developed was applied to the determination of the compound in its formulations, Hializan-10 mg, obtaining errors lower than 2%.

---

Polarographische Untersuchung eines Benzodiazepinoxazols: Oxazolam

     

Determination of hemoglobin in plasma and serum by linear-sweep polarography

A new method for the determination of hemoglobin (Hb) is described. It is based on the amplification of the Hb enzyme-catalyzed reaction between O-phenyldiamine (OPD) and H₂O₂ and polarographic measurement of the enzyme-generated product 2,2′-diaminoazobenzene (DAA). A linear calibration plot has been obtained within the range of 1∼20 μg/ml (r = 0.987) Hb. The assay is performed on the microtitre plate to avoid the influence of serum protein and to obtain good reproducibility. The method is practical, reliable and convenient, and has been applied to determine Hb in plasma and serum. Received: 13 November 1995 / Accepted: 26 January 1996     

Voltammetric method for the determination of H2O2 in rainwater

Summary Presented below is an electrochemical method for the determination of hydrogen peroxide levels in the atmospheric liquid water. The hydrogen peroxide concentration is determined by a voltammetric method involving a rotating disk electrode. The oxidation limiting current at +0.4 V/SCE is proportional to the concentration of hydrogen peroxide found in 1 mol/l KNO₃ containing a phosphate buffer, pH 7.5. An analytical blank is prepared in situ by addition of catalase enzyme to avoid interferences. The detection limit obtained is 5×10^–9 mol/l.     

KMnO4-OP Chemiluminescence system for FIA determination of hydrogen peroxide

A fast and simple KMnO₄-OP chemiluminescence system for flow-injection analysis of hydrogen peroxide is described. When a mixture of sample and OP is injected into acidic KMnO₄, solution in a flow-cell, strong chemiluminescence occurs. The response is linear to the concentration of hydrogen peroxide in the range of 1.0 × 10^–8 to 6.0 × 10^–5 mol/l with 0.1 mol/l permanganate, and the upper limit of linear response could be extended to 6 × 10^–3 mol/l by increasing the permanganate concentration. The relative standard deviation of the method is between 1.6 and 2.3%. The detection limit is 6.0 × 10^–9 mol/l. This method is suitable for automatic and continuous analysis and has been successfully tested for determination of hydrogen peroxide in rain water. The chemiluminescence intensity was found to be remarkably enhanced in the presence of the OP micellar system.     

Captopril Modified Silver Electrode and Its Application to the Electroanalysis of Hemoglobin

Abstract

Captopril, 1-[(2S)-3-mercapto-2-methyl-1-oxopropyl]-L-Proline, can be deposited onto a silver electrode by a covalent bonding method to give a long-lived and stable chemically modified electrode(CME). Since the CME is prepared with a reaction between captopril and the substrate silver, the CME being prepared by this method is very stable. Furthermore, Hemoglobin(Hb) exhibits excellent voltammetric response at the modified electrode. Differential pulse voltammetric(DPV) measurements of the protein with this CME reveal the existence of a linear relationship between the anodic peak current and the concentration of Hb in the range of 2×10^?6 ～ 5×10^?5 mol/L. The detection limit is 8×10^?7 mol/L and the relative standard deviation of results is 5% for 6 successive determinations at 2×10_-5 mol/L. The determination of Hb for a real example is carried out.     

Spectrofluorimetric determination of both hydrogen peroxide and -O-O-H in polyethylene glycols (PEGs) using 2-hydroxy-1-naphthaldehyde thiosemicarbazon (HNT) as the substrate for horseradish peroxidase (HRP)

2-Hydroxy-1-naphthaldehyde thiosemicarbazon (HNT) had been synthesized and used as a new kind of substrate for horseradish peroxidase (HRP) in spectrofluorimetric determination of hydrogen peroxide (H(2)O(2)). The oxidation reaction of HNT with H(2)O(2) under the catalysis of HRP was studied in detail. The possible reaction mechanism was discussed. Under optimum experimental conditions, the oxidized product of HNT had excitation and emission maxima at 260 and 450 nm, respectively. The linear range of this method was 1.30 x 10(-9)-1.25 x 10(-5) mol l(-1) with a detection limit of 3.89 x 10(-10) mol l(-1). The effect of interferences, surfactants and organic solvents on the determination of H(2)O(2) had been investigated. A study to prove the existence of -O-O-H in PEGs was carried out. The proposed method was successfully applied to the determination of -O-O-H in polyethylene glycols.     

Application ofo-Hydroxyphenylfluorone as a Fluorogenic Indicator to the Determination of Hydrogen Peroxide and Oxidase Substrates Based on the Catalytic Effect of Hemin

A highly sensitive fluorescence quenching method has been developed for selective determination of hydrogen peroxide based on the catalytic effect of hemin on theo-hydroxyphenylfluorone (a new fluorogenic substrate) and hydrogen peroxide system. Under optimum conditions, the calibration graph was linear over the range 0–1.0 × 10⁻⁶mol/liter hydrogen peroxide, with a limit of detection of 8.0 × 10⁻⁹mol/liter in a 10-min reaction period. It can easily be incorporated into the determination of biochemical substances that produce hydrogen peroxide under catalytic oxidation by their oxidase. This possibility has been tested for the determination of glucose in human sera as an example.     

Polarographic study of a benzodiazepinooxazole: Cloxazolam

Summary The polarographic behaviour of 10-chloro-11b-(2-chlorophenyl)-2,3,7,11b-tetrahydrooxazolo[3,2-d][1,4]-benzodiazipine-6(5H)-one (cloxazolam) was studied in the pH range 1–12. Cloxazolam suffers a hydrolysis process, which can be followed by polarography. The reduction processes of cloxazolam and its hydrolysis product are irreversible and their currents are diffusion-controlled. Two polarographic methods have been developed upon the basis of the reduction of both the protonated iminium form (pH 1.45, measurement time: 10 min) and the benzophenone produced in the hydrolysis process (pH 11.75, measurement time: 15 min). The relationship between reduction peak current and concentration is linear up to at least 5.72×10^–5 mol/l for both methods. A higher sensitivity was obtained for the method based on the benzophenone reduction (detection limit 5.72×10^–8 mol/l; 20 ppb). The methods developed were applied to the determination of cloxazolam in its pharmaceutical formulations (Betavel, 1 mg). The method in alkaline medium was the most adequate for the determination of the compound in tablets, with errors lower than 1%.

---

Polarographische Untersuchung eines Benzodiazepinoxazols: Cloxazolam

     

Porphyrin hybrid complex ([2Fe-2S]2TPPS) as a catalyst for determination of hydrogen peroxide.

A new promising mimetic enzyme, a [2Fe-2S] cluster-porphyrin hybrid complex ([2Fe-2S]2TPPS), has been synthesized and applied to the determination of hydrogen peroxide. Under the optimum condition, the calibration graph has a linear range of 8.0 x 10(-8) - 1.0 x 10(6) mol/l H2O2 with a detection limit (3sigma, N = 9) of 5.3 x 10(-9) mol/l.     

Kinetic Spectrophotometric Determination of Hydrazine with Neutral Red-Nitrite System

 A new kinetic spectrophotometric method for the determination of hydrazine is described. The method is based on the inhibitory effect of hydrazine on the reaction of neutral red with nitrite in acidic media and 28 °C. A product from the reaction of neutral red with nitrite was used to monitor the reaction spectrophotometrically at 352 nm. Hydrazine can be determined in the range 4.7×10⁻⁶∼3.1×10⁻⁵mol/L with a detection limit of 3.1×10⁻⁶mol/L. The method was applied to the determination of hydrazine in water samples. Received July 23, 1999. Revision January 10, 2000.     

Spectrofluorimetric determination of hydrogen peroxide based on the catalytic effect of peroxidase-like manganese tetrakis(sulphophenyl) porphyrin on the oxidation of homovanillic acid

Traces of hydrogen peroxide (8.5 × 10^?8–2.5 × 10^?6 mol/l) and, indirectly, glucose (3–44 × 10^?6 mol/l) can be determined by the fluorescence reaction between homovanillic acid and hydrogen peroxide. Mn-TPPS₄ is found to have very similar catalytic properties to horse peroxidase.     

Determination of hemoglobin at a novel NH2/ITO ion implantation modified electrode

A novel electrode was prepared by implanting NH₂ ⁺ into an ITO film (NH₂/ITO). Gold nanoparticles were deposited on the surface of NH₂/ITO electrode. The NH₂/ITO and Au/NH₂/ITO electrodes were used to determine hemoglobin (Hb) immobilized on the electrodes surfaces. The relationship of the reductive peak current value of Hb among different electrodes was: Hb/ITO:Hb/Au/ITO:Hb/NH₂/ITO:Hb/Au/NH₂/ITO=1:1.5:2:4. The linkage between the –NH₂ implanted into ITO film and the –COOH of Hb was recognized to be the reason for the increase of active Hb coverage on NH₂/ITO electrode compared with the ITO electrode. Increase of active Hb coverage on Au/NH₂/ITO compared with Au/ITO was attributed to the different amount of gold nanoparticles deposited. The determination of Hb at an Au/NH₂/ITO electrode was optimized. Calibration curve was obtained over the range of 1.0 × 10⁻⁸ – 1.0 × 10⁻⁶ mol · L⁻¹ with a detection limit of 1.0 × 10⁻⁸ mol · L⁻¹. Results showed that the novel NH₂/ITO and Au/NH₂/ITO electrodes exhibited good stability, reproducibility besides better electrochemical performance. Correspondence: Jing Bo Hu, Department of Chemistry, Beijing Normal University, Beijing 100875, China     

Immobilization and Bioelectrochemistry of Hemoglobin Based on Carrageenan and Room Temperature Ionic Liquid Composite Film

A novel biopolymer/room‐temperature ionic liquid composite film based on carrageenan, room temperature ionic liquid (IL) [1‐butyl‐3‐methylimidazolium tetra?uoroborate ([BMIM]BF₄)] was explored for immobilization of hemoglobin (Hb) and construction of biosensor. Direct electrochemistry and electrocatalytic behaviors of Hb entrapped in the IL‐carrageenan composite ?lm on the surface of glassy carbon electrode (GCE) were investigated. UV‐vis spectroscopy demonstrated that Hb in the IL‐carrageenan composite ?lm could retain its native secondary structure. A pair of well‐de?ned redox peaks of Hb was obtained at the Hb‐IL‐carrageenan composite ?lm modi?ed electrode through direct electron transfer between the protein and the underlying electrode. The heterogeneous electron transfer rate constant (k_s) was 2.02 s^?1, indicating great facilitation of the electron transfer between Hb and IL‐carrageenan composite film modi?ed electrode. The modi?ed electrode showed excellent electrocatalytic activity toward reduction of hydrogen peroxide with a linear range of 5.0×10^?6 to 1.5×10^?4 mol/L and the detection limit was 2.12×10^?7 mol/L (S/N=3). The apparent Michaelis‐Menten constant K_M^app for hydrogen peroxide was estimated to be 0.02 mmol/L, indicating that the biosensor possessed high af?nity to hydrogen peroxide. In addition, the proposed biosensor showed good reproducibility and stability.     

Determination of Lysine in Nutrition Sample by Adsorption Voltammetry

Abstract

Lysine can be determined by adsorptive voltammetry after derivatization with acetaldehyde in 1.3 x 10^?2mol/ L borax-NaOH buffer solution (containing 4 x 10^?3mol/ L of CH₃CHO at pH10). The Schiff's base product of the derivation can be adsorbed on a hanging mercury electrode and reduced with peak potential of about -1.33v (vs.SCE) after 120s pre-concentration time. The derivative peak height is linearly proportional to the concentration for lysine in the range 6.0 x 10^?7-1.0 x 10^?5mol/ L. The detection limit is 4.0 x 10^?7mol/ L. Using this method, we have directly determined lysine in nutrition samples without any pre-separation step.