Luminescence properties of transparent ceramics Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Yb

We present the results of studying the luminescence properties of transparent ceramics Y₃Al₅O₁₂:Yb obtained by the vacuum sintering and nanocrystalline technology. In the course of research, we measured the luminescence and luminescence excitation spectra, as well as the temperature and kinetic behavior of luminescence. Our results are analyzed in comparison with the characteristics of corresponding single crystals. We revealed that processes of generation and relaxation of electronic excitations that occur in ceramics, in particular, in the charge transfer state, are similar to processes occurring in crystals. The behavior of two charge-transfer luminescence bands at 340 and 490 nm is studied. In the range 300–600 nm, we revealed a broad emission band of radiation of other type, which is also observed in spectra of undoped ceramics. This broad band is attributed to F⁺ centers. Emission and excitation spectra of charge transfer luminescence at a maximum of the temperature dependence of 100 K are measured for the first time. We found that, upon excitation in the charge transfer band, luminescence in ceramics is more intense than in single crystals with similar concentrations of Yb and has a higher quenching temperature.     

Investigation of luminescence spectra of the Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> and Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Ce single-crystal films

The luminescence spectra of single-crystal films and bulk crystals of yttrium-aluminum garnet Y₃Al₅O₁₂ and Ce³⁺-activated Y₃Al₅O₁₂ were investigated. It was shown that the room-temperature luminescence intensity of the Ce³⁺-free single-crystal Y₃Al₅O₁₂ film was considerably lower than that of the bulk crystals, while the luminescence intensity of the Ce³⁺ ions in the Y₃Al₅O₁₂:Ce films was considerably higher than that one for the corresponding bulk crystal.     

Kinetic characteristics of subterahertz phonons in optically transparent Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> ceramics with twinning elements in their structure

The relationship between the kinetic characteristics of subterahertz thermal phonons and the structural features of grains and grain boundaries in optically transparent yttrium aluminum garnet (YAG) ceramics is investigated. The effect of plastic deformation on the formation of the structure of cubic oxide ceramics is analyzed. It is shown that the main mechanism of plastic deformation responsible for the formation of natural crystallographic boundaries in samples is the twinning effect.     

Femtosecond laser written stress-induced Nd:Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> (Nd:YAG) channel waveguide laser

Single tracks and pairs of tracks were written into undoped and Nd-doped YAG crystals using a commercial femtosecond laser system delivering pulses with pulse duration of 140 fs and pulse energies up to 10 μJ. The pulses were focused by a 50× microscope objective below the surface of the crystals. Due to the elasto-optical effect, stress-induced birefringence was observed in domains surrounding the single tracks and between the pairs of tracks. Waveguiding was demonstrated in certain channels in these domains. To investigate the underlying guiding mechanism highly selective chemical etching of the modified material was performed with etching rates up to 5 μm/h. Pumped at 808 nm, laser operation at a wavelength of 1064 nm was achieved. The maximum output power was 25.5 mW at 261 mW of launched pump power with a slope efficiency of 23%.     

Spectral characteristics of a Yb-doped Y<Subscript>2</Subscript>O<Subscript>3</Subscript> ceramic laser

We report the experimental observation of random wavelength emission and intensity-dependent central-wavelength shift in a diode-pumped Yb³⁺-doped Y₂O₃ ceramic laser. We show experimentally that, like conventional lasers, the emission of the laser has fixed well-defined transverse modes; however, its instantaneous emission wavelengths change randomly with time. The central wavelength of the laser emission also shifts with the intracavity light intensity. A model was developed to describe the spectral behavior of Yb³⁺-doped lasers. We show that the observed random wavelength emission and central lasing wavelength shift of the laser could be well explained based on the strong reabsorption of light in the gain medium. PACS 42.55.Rz; 42.60.Mi; 42.55.Xi     

Laser performance of holmium-doped Lu<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> and (Lu,Y)<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> crystals pumped by Tm:fiber laser

Optical properties of Ho³⁺-doped Lu₃Al₅O₁₂ and (Lu,Y)₃Al₅O₁₂ crystals were investigated and compared. Substitution of Y for Lu in the host garnet Lu₃Al₅O₁₂ results in broad absorption and emission spectra, and improvements in the laser behavior of Ho³⁺. Pumped by Tm:fiber laser, a maximum output power of 5.02 and 5.73 W of Ho-doped Lu₃Al₅O₁₂ and (Lu,Y)₃Al₅O₁₂ have been obtained, respectively. The center lasing wavelength are 2124.5 and 2123.0 nm for Lu₃Al₅O₁₂ and (Lu,Y)₃Al₅O₁₂, respectively.     

Identification of luminescence bands of Nd<Superscript>3+</Superscript> ions in yttrium aluminates Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> and YAlO<Subscript>3</Subscript>

The pulsed cathodoluminescence spectra of yttrium aluminum garnet and perovskite activated by neodymium are investigated at room temperature in the wavelength range 250–750 nm. The luminescence bands are identified, and all of them are assigned to Nd³⁺ transitions, including those from the doublet levels.     

Synthesis and characterization of mono-dispersed Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Er<Superscript>3+</Superscript>-coated SiO<Subscript>2</Subscript> nanoparticles by co-precipitation process

In this paper, a facile co-precipitation process for preparing mono-dispersed core–shell structure nanoparticles is reported. The 110 nm SiO₂ cores coated with an yttrium aluminum garnet (Y₃Al₅O₁₂) layer doped with Er³⁺ were synthesized and the influence of the concentration ratio of [urea]/[metal ions] on the final product was investigated. The structure and morphology of samples were characterized by the X-ray powder diffraction, Fourier transform IR spectroscopy and transmission electron microscopy, respectively. The results indicate that a layer of well-crystallized garnet Y₃Al₅O₁₂:Er³⁺ were successfully coated on the silica particles with the thickness of 20 nm. The near infrared and upconversion luminescent spectra of the SiO₂@Y₃Al₅O₁₂:Er³⁺ powders further confirm that a Y₃Al₅O₁₂:Er³⁺ coating layer has formed on the surface of silica spherical particles.     

Al<Subscript>2</Subscript>O<Subscript>3</Subscript> plasma production during pulsed laser deposition

A Nd:YAG laser operating in second harmonic (532 nm), 3 ns pulse duration, 150 mJ pulse energy, and 10 Hz repetition rate, is employed to irradiate Al₂O₃ target placed in high vacuum. The produced plasma is investigated by an ion collector used in time-of-flight configuration and by a mass quadrupole spectrometer, in order to determine the equivalent plasma temperature and the atomic and molecular composition. Pulsed laser deposition technique has been used to produce thin films on different substrates placed close to the target. Different surface analyses, such as energy dispersive X-ray fluorescence (EDXRF), X-ray photoelectron spectroscopy (XPS) and surface profilometry are employed to characterize the produced films. Measurements of ablation yield, plasma equivalent temperature, acceleration voltage and characterization of grown thin films are presented and discussed.     

Various types of photoactive behavior of the Y<Subscript>3</Subscript>Fe<Subscript>5</Subscript>O<Subscript>12</Subscript> ferrimagnetic insulator

The photomagnetic behavior of single-crystal yttrium iron garnet Y₃Fe₅O₁₂ doped with iridium, substituting the cation of iron in the octahedron, is investigated upon illumination at room temperature. It is shown that the photomagnetic properties of Y₃Fe_4.97Ir_0.03O₁₂ samples are to a large degree related to the impurity distortion of the sublattice of iron atoms in octahedral coordination, rather than solely to the possible presence of Fe⁴⁺ cations, which are inactive at room temperature and may even be lacking in single crystals doped with iridium. It is concluded that the photoinduced change in the magnetic parameters of this material is determined by the location of impurity cations and increased surface imperfection of the material. The reasons for the different photoactive behavior of this promising material for spintronics, that is, a singlecrystal yttrium iron garnet, are summarized.     

Magnetic collapse in yttrium iron garnet Y<Subscript>3</Subscript>Fe<Subscript>5</Subscript>O<Subscript>12</Subscript> at high pressure

The effect of high pressures up to 70 GPa on single-and polycrystalline samples of yttrium iron garnet Y₃⁵⁷Fe₅O₁₂ is studied by Mössbauer absorption spectroscopy (for the ⁵⁷Fe nucleus) in a diamond-anvil cell. It is found that the hyperfine magnetic field H_hf at ⁵⁷Fe nuclei vanishes abruptly at a pressure of 48 ± 2 GPa, which indicates the transition of the crystal from the ferrimagnetic state to nonmagnetic one. The magnetic transition is irreversible. When the pressure decreases, the magnetic state is not recovered and the garnet remains nonmagnetic until zero pressure. The behavior of the quadrupole splitting and isomer shift shows that, simultaneously with the magnetic transition, irreversible electron and possibly spin transitions occur with changes in the local crystalline structure. The mechanisms of the magnetic collapse are discussed.     

Diode-pumped Yb:Y<Subscript>2</Subscript>SiO<Subscript>5</Subscript>-LiB<Subscript>3</Subscript>O<Subscript>5</Subscript> cyan laser at 501.7 nm

We describe the output performances of the 928 nm ⁴ F _3/2 → ⁴ I _9/2 transition in Nd:CLNGG under diode-laser pumping. An end-pumped Nd:CLNGG crystal yielded 1.3 W of continuous-wave output power for 17.8 W of absorbed pump power. The slope efficiency with respect to the absorbed pump power was 11.2%. Furthermore, with 17.8 W of diode pump power and the frequency-doubling crystal LiB₃O₅ (LBO), a maximum output power of 260 mW in the blue spectral range at 464 nm has been achieved. The blue output power stability over 4 h is better than 3.2%.     

The influence of the specific surface of grains on the luminescence properties of Nd<Superscript>3+</Superscript>-doped Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> nanopowders

Nd³⁺:Y₃Al₅O₁₂ (Nd:YAG) powders were prepared by the Pechini method in the temperature range of 800 to 1400 °C. The pure garnet phase of the obtained materials was confirmed by XRD studies. The size of the grains was controlled by the annealing temperature of the samples. Their morphologies were investigated by TEM and porosity measurements (BET). The effect of annealing temperature on the morphology and luminescence properties of Nd:YAG nanocrystallites was studied, and the results were compared to the properties of a Nd:YAG single crystal. A significant enhancement of the ⁴F_3/2→⁴I_9/2/⁴F_3/2→⁴I_11/2 intensity ratio with decreasing grain size was observed. It was found that the decay times of the Nd³⁺ luminescence depends on the specific surface and is significantly longer for well crystallized nanocrystalline grains than for single crystals having the same concentration of Nd³⁺ ions. The role of crystallinity and specific surface on the radiative processes is analyzed. PACS 78.55.-m; 78.20.Ci; 78.67.Bf; 78.68.+m     

Temperature effect on the elastic properties of yttrium garnet ferrite Y<Subscript>3</Subscript>Fe<Subscript>5</Subscript>O<Subscript>12</Subscript>

The Young’s moduli along the [100] and [110] crystallographic directions and the shear modulus along the [100] direction in a high-purity yttrium garnet ferrite single crystal are measured in the temperature range from 20 to 600°C. All the independent elastic constants are calculated for this temperature range. The behavior of the elastic moduli and elastic anisotropy factor is analyzed in the vicinity of the critical temperature of the magnetic phase transition.     

NMR spectrum in a Mn<Subscript>3</Subscript>Al<Subscript>2</Subscript>Ge<Subscript>3</Subscript>O<Subscript>12</Subscript> noncollinear antiferromagnet

The dependence of the NMR frequencies on the external magnetic field in a Mn₃Al₂Ge₃O₁₂ non-collinear 12-sublattice antiferromgnet is calculated using the exchange approximation for the spin dynamics.     

Zeeman effect and stark splitting of the electronic states of the rare-earth ion in the paramagnetic terbium garnets Tb<Subscript>3</Subscript>Ga<Subscript>5</Subscript>O<Subscript>12</Subscript> and Tb<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>

The Zeeman effect in the ⁷ F ₆ → ⁵ D ₄ absorption band of the Tb³⁺ ion in the paramagnetic garnets Tb₃Ga₅O₁₂ and Tb₃Al₅O₁₂ was studied. The field dependences of the Zeeman splitting of some absorption lines are found to exhibit unusual behavior: as the magnetic field increases, the band splitting decreases rather than increases. Symmetry analysis relates these lines to 4f → 4f electron transitions of the doublet-quasi-doublet or quasi-doublet-doublet type, for which the field dependences of the splitting differ radically from the well-known field dependences of the Zeeman splitting for quasi-doublet-quasi-doublet or quasi-doublet-singlet transitions in a longitudinal magnetic field.     

Revelation of the microstructure of oxide FeAl/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocomposite

The structural transformations at different stages of the preparation of oxide FeAl/Al₂O₃ nanocomposite by mechanosynthesis with the use of a preliminarily activated FeAl precursor are studied by means of transmission electron microscopy, X-ray diffraction and Mössbauer spectroscopy.