Blood compatibility of thermoplastic polyurethane membrane immobilized with water-soluble chitosan/dextran sulfate

Water-soluble chitosan (WSC)/dextran sulfate (DS) was immobilized onto the surface of thermoplastic polyurethane (TPU) membrane after ozone-induced graft polymerization of poly(acrylic acid) (PAA). The surface was characterized with contact angle measurement and X-ray photoelectron spectroscopy (XPS). The adsorption of human plasma fibrinogen (HPF) followed the Langmuir adsorption isotherm. The results showed that the surface density of peroxides generated and poly(acrylic acid) (PAA) grafted reached the maximum value at 20 min of ozone treatment. It was found that the WSC- and DS-immobilized amount increased with pH and the molecular weight of WSC. The membrane/water interfacial free energy increased with PAA-grafting and WSC/DS-immobilization, indicating the increasing wettability of TPU membrane. The adsorption of HPF on TPU-WSC/DS membranes could be effectively curtailed and exhibited unfavorable adsorption. Moreover, WSC/DS immobilization could effectively reduce platelet adhesion and prolong the blood coagulation time, thereby membrane improving blood compatibility of TPU membrane. In addition, the in vitro cytotoxicity test of PEC modification was non-cytotoxic according to much low growth inhibition of L929 fibroblasts. Furthermore, TPU-WSC/DS membranes exhibited higher cell viability than native TPU membrane.     

In-vitro hemocompatibility evaluation of a thermoplastic polyurethane membrane with surface-immobilized water-soluble chitosan and heparin

The surface of a thermoplastic polyurethane (TPU) membrane was treated with low temperature plasma (LTP) and was then grafted with poly(acrylic acid) (PAA), followed by the grafting of water-soluble chitosan (WSC) and heparin (HEP). The surface was characterized with static contact-angle and X-ray photoelectron spectroscopy (XPS). The results showed that the surface densities of peroxides and PAA reached a maximum when treated with LTP for 90 s. A higher pH of the reacting solution led to higher graft densities of WSC and HEP. After WSC and HEP grafting, the hydrophilicity of the TPU membrane was increased. The adsorption of proteins on HEP-grafted TPU membranes was effectively curtailed. In addition, HEP grafting also reduced platelet adhesion, elevated thrombin inactivation, and prolonged the blood coagulation time. According to the L929 fibroblast cell growth inhibition index, the HEP-grafted TPU membranes exhibited non-cytotoxicity. Overall results demonstrated that the HEP immobilization could not only improve the hydrophilicity but also the hemocompatibility of the TPU membrane, while maintaining the ascendant biocompatibility.     

Surface modification of poly(tetramethylene adipate-co-terephthalate) membrane via layer-by-layer assembly of chitosan and dextran sulfate polyelectrolyte multiplayer

The improvement of hydrophilicity and hemocompatibility of poly(tetramethylene adipate-co-terephthalate) (PTAT) membrane was developed via polyelectrolyte multilayers (PEMs) immobilization. The polysaccharide PEMs included chitosan (CS, as a positive-charged and antibacterial agent) and dextran sulfate (DS, as a negative-charged and anti-adhesive agent) were successfully prepared using the aminolyzed PTAT membrane in a layer-by-layer (LBL) self-assembly manner. The obtained results showed that the contact angle of as-modified PTAT membranes reached to the steady value after four bilayers of coating, hence suggesting that the full coverage was achieved. It could be found that the PTAT–PEMs membranes with DS as the outmost layer could resist the platelet adhesion and human plasma fibrinogen (HPF) adsorption, thereby prolonging effectively the blood coagulation times. According to L929 fibroblast cell growth inhibition index, the as-prepared PTAT membranes exhibited non-cytotoxic. Overall results demonstrated that such an easy, valid and shape-independent processing should be potential for surface modification of PTAT membrane in the application of hemodialysis devices.     

In vitro biocompatibility of three‐dimensional chitosan scaffolds immobilized with chondroitin‐6‐sulfate

Cellular‐compatible scaffolds were prepared using a three‐dimensional micro‐porous chitosan (CS) non‐woven fabric immobilized by glutaraldehyde (GA), followed by the immobilization of chondroitin‐6‐sulfate (ChS). To characterize the immobilizing process, tensile analysis, and scanning electron microscopy (SEM) were performed. The cell seeding efficiency and proliferation test were evaluated using L929 fibroblasts. The chitosan scaffolds showed high water vapor transmission rate and antibacterial activity. In addition, ChS‐immobilized scaffolds exhibited higher cell seeding efficiency and fibroblasts proliferation. These results demonstrated that the CS non‐woven fabrics grafted with GA and immobilized with ChS could be an appropriate candidate for wound healing and artificial scaffolds in the clinical applications. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface Modification of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Membrane by Combining Surface Aminolysis Treatment with Collagen Immobilization

Amino groups were introduced onto a poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) surface by applying 1,6-hexanediamine treatment. The effects of aminolysis time and 1,6-hexanediamine concentration on hydrophilicity of the treated PHBV were investigated using contact angle measurement. The occurrence of the aminolysis and the introduction of NH₂ groups were verified by X-ray photoelectron spectroscopy (XPS) and ninhydrin method. By use of the NH₂ groups as active sites, collagen was further immobilized on the aminolyzed PHBV (NH₂-PHBV) membrane via a cross-linking agent, glutaraldehyde. The increase of nitrogen content and further decrease of water contact angle after immobilization of collagen suggested that the surfaces became more hydrophilic. Mouse bone marrow stromal cells (BMSc) cultured on untreated PHBV and treated PHBV films were evaluated by cell attachment, cell proliferation, and morphological observation under scanning electron microscope (SEM). The order of cytocompatibility is Coll-PHBV > NH₂-PHBV > PHBV, indicating coll-PHBV was a promising material in future tissue-engineering application.     

Surface immobilization of chondroitin 6-sulfate/heparin multilayer on stainless steel for developing drug-eluting coronary stents

A thin layer of gold was sputtered onto SUS316L stainless steel (SS) sheet. After thiolizing the Au layer with dimercaptosuccinic acid (DMSA), layers of chondroitin 6-sulfate (ChS) and heparin (HEP) were alternatively immobilized on the Au-treated SS. The resulting stent would be both anti-atherogenic and anti-thrombogenic. After repeating one to five cycles, one to five layers of polyelectrolyte complex (PEC) of ChS/HEP were successfully fabricated. A model drug, sirolimus, was loaded in the ChS/HEP layers. The SS-ChS-HEP surface was examined by X-ray photoelectron spectroscopy (XPS), contact angle, and atomic force microscopy (AFM) measurement. Biological tests including hemocompatibility, drug release pattern, and the inhibition of smooth muscle cell proliferation were also performed. The results show that the multilayer of ChS/HEP exhibits longer blood clotting time than pure SS substrates. Therefore, this biopolymer multilayer can avoid thrombosis on the stainless. The releasing rate of sirolimus can be controlled through the number of ChS/HEP PEC layers. With a five-layer coating, sirolimus can be released continuously for more than 20 days. Furthermore, the multilayer ChS/HEP loaded with sirolimus can suppress specifically to the growth of smooth muscle cells to avoid restenosis. This suggests that the PEC multilayer of ChS/HEP modified-SS could be applied in making drug-eluting stents.     

聚丙烯酸/聚丙烯酰胺水溶液复合特性的研究

通过酸度、电导率、粘度、接触角的测定,研究了聚丙烯酸 (PAA) /聚丙烯酰胺 (PAM) 水溶液复合物及复合物膜的结构和性能。结果表明,酸度、温度、浓度和复合比影响PAA/PAM的复合水溶液中大分子链的构象和流体力学体积,适度的氢键作用可以形成均相的复合溶液。经过热处理和未经热处理的聚合物膜表现出了不同的亲水性能。     

Functional membranes prepared by layer‐by‐layer assembly and its metal ions adsorption property

PVDF/(PEI‐C/PAA)_n functional membranes were prepared by layer‐by‐layer (LbL) assembly, and their heavy metal ions adsorption capability was investigated. The changes in the chemical compositions of membrane surfaces were determined by X‐ray photoelectron spectroscopy (XPS). XPS results show that the surface of the PVDF membrane can be alternatively functionalized by PEI‐C and PAA. The membrane surface hydrophilicity was evaluated through water contact angle measurement. Contact angle results show that the surface hydrophilicity of the membrane surface depends on the outermost deposited layer. Morphological changes of membrane surfaces were observed by scanning electron microscopy (SEM). The water fluxes for these membranes were elevated after modification. The performances of the PVDF/(PEI‐C/PAA)_n membranes on the adsorption of copper ions (Cu²⁺) from aqueous solutions were investigated by inductively coupled plasma (ICP). The results indicate that the PVDF/(PEI‐C/PAA)_n functional membranes show high copper ions adsorption ability. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of Highly Hydrophilic Polyaniline Nanowires and Sub‐Micro/Nanostructured Dendrites on Poly(propylene) Film Surfaces

Summary: Polyaniline (PANI) nanowires and sub‐micro/nanostructured dendrites are synthesized and immobilized on PP‐g‐PAA film surfaces via routine oxidative polymerization of aniline under different conditions, where grafting poly(acrylic acid) (PAA) served as a template and dopant, and SDS as a surfactant. The immobilized PANI enhances the surface hydrophilicity of the poly(propylene) (PP) films, and a superhydrophilic surface is obtained in this way. The mechanism of forming different morphologies of PANI and of correspondingly obtaining a superhydrophilic surface are briefly discussed.

FESEM image shows the PANI sub‐micro/nanostructured dendrites immobilized on the surfaces of PP films. The modified surface is highly hydrophilic with a water contact angle of 3°.     

Temperature‐sensitive chitosan membranes as a substrate for cell adhesion and cell sheet detachment

A series of temperature‐sensitive poly(CSA‐co‐NIPAAm) membranes that were suitable for cell culture and confluent cell sheets detachment were prepared. The membranes with thermo‐responsive surface properties were synthesized by the copolymerization of acrylic acid‐derivatized chitosan (CSA) and N‐isopropylacrylamide (NIPAAm) in aqueous solution. Characterization of the membranes were carried out by means of the Fourier transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), and water contact‐angle (WCA) measurements. The adhesion and detachment of mouse fibroblast (L929) cells on these membranes have been investigated. The study showed that poly(CSA‐co‐NIPAAm) membranes could not only enhance fibroblasts attachment but also harvest confluent cell sheets by simply lowering the temperature. Furthermore, the detached cells retained high viability and could proliferate again after transferred to a new culture surface. Copyright © 2011 John Wiley & Sons, Ltd.     

Structure and pH‐sensitive properties of poly (vinylidene fluoride) membrane changed by blending poly (acrylic acid) microgels

pH‐sensitive poly (vinylidene fluoride) (PVDF)/poly (acrylic acid) (PAA) microgels membranes are prepared by phase inversion of the N, N‐dimethylformamide solution containing PAA microgels and PVDF in aqueous solution. The composition and structure of the blend membrane are investigated by Fourier transform infrared spectra, X‐ray photoelectron spectroscopy measurements, thermo gravimetric analysis, field‐emission scanning electron microscope and atomic force microscope. The results indicate the surface and cross section of the blend membranes have a porous structure with PAA microgels immobilized inside the pore and on the membrane surface. The blend PVDF membranes exhibit pH‐sensitive water flux, with the most drastic change in permeability observed between pH 3.7 and 6.3. The blend membranes are fouled by bovine serum albumin, and their antifouling property is enhanced by increasing PAA microgels, mainly derived from the improved hydrophilic property. Copyright © 2013 John Wiley & Sons, Ltd.     

Antibacterial activity and cytocompatibility of chitosan-N-hydroxy-2,3-propyl-N methyl-N,N-diallylammonium methyl sulfate

A water-soluble quaternary ammonium salt of chitosan, chitosan-N-hydroxy-2,3-propyl-N-methyl-N,N-diallylammonium methyl sulfate (MDAACS), was synthesized by reacting chitosan with methyl diallyl ammonium salt (MDAA). The results of water contact angle and swelling ratio showed that the membrane of MDAACS was more hydrophilic than chitosan. The antibacterial activities of MDAACS against Staphylococcus aureus and Klebsiella pneumoniae were evaluated with the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). The results showed that the antibacterial activity of MDAACS was higher than that of chitosan. The cytocompatibility was evaluated in vitro with L929 fibroblast proliferation based on MTT colorimetric assay. The results showed that cell growth was much higher on MDAACS than on chitosan.     

Surface modification of glass beads with poly(acrylic acid)

Non‐porous P₂ glass beads were etched with sodium hydroxide to increase the number of silanol groups that could be used to modify the surface. The etched glass beads were then functionalized with 3‐aminopropyltriethoxysilane (APS) and/or glycidoxypropyltrimethoxysilane (GPS). The surface of the glass beads were further modified with poly(acrylic acid) (PAA) by reacting the carboxyl groups on PAA with the amino groups of the pregrafted APS. The chemical modifications were characterized by FT‐IR spectroscopy, particle size analyzer and tensiometry for contact angle and porosity measurements. Five different molecular weight PAA polymers ranging from 2000 to 3,000,000 were grafted with less than expected increase of grafted PAA with molecular weight. The amount of APS and PAA on the surface was determined from thermogravimetric analysis and elemental analysis data. The surface properties of the surface modified glass beads were determined by measuring water and hexane penetration rate and contact angle. The surface morphology was examined by scanning electron microscopy. Copyright © 2006 John Wiley & Sons, Ltd.     

Antibacterial photocatalytic self‐cleaning poly(vinylidene fluoride) membrane for dye wastewater treatment

Membrane technology has been successfully applied for the removal of dyes from wastewater in the textile industry. A novel poly(vinylidene fluoride) (PVDF) membrane was prepared via blending with different dosages of Ag‐TiO₂‐APTES composite for dyeing waste water treatment in our study. And the effect of Ag‐TiO₂‐APTES blended into the PVDF membrane was discussed, including the rejection rate of methylene blue (MB) dye, membrane morphology, surface hydrophilicity, antibacterial activity, and a certain photocatalytic self‐cleaning performance. X‐ray diffraction and Fourier transform infrared characterization confirmed that Ag‐TiO₂ was functionalized by amount of hydroxyl group (−OH) and amino group (NH−), which provided by APTES. Contact angle measurement certified that the hydrophilicity of the membrane surface increased, with the contact angle decrease to 61.4° compared with 81.8° of original PVDF membrane. MB rejection rate was also increased to 90.1% after addition of Ag‐TiO₂‐APTES, and the rejection of original membrane was only 74.3%. The morphologies of membranes were observed by scanning electron microscope, which indicated that Ag‐TiO₂‐APTES had a good dispersion in membrane matrix and also improved the microstructure of membranes. Besides, UV irradiation experiments were performed on the composite films contaminated by MB, and the result showed that Ag‐TiO₂‐APTES nanoparticle provided PVDF membrane with a certain photodegradation capacity under UV irradiation. Moreover, antibacterial activity of the composite membrane was also demonstrated through antibacterial experiment, Escherichia coli as the representative bacteria. Perhaps, this research may provide a new way for PVDF blending modification.     

Poly(vinyl alcohol)/polyelectrolyte complex blend membrane for pervaporation dehydration of isopropanol

Poly(vinyl alcohol) (PVA) was blended with soluble polyelectrolyte complex (PEC) made from poly(diallyldimethylammonium chloride) (PDDA) and sodium carboxymethyl cellulose (CMCNa). Crystallinity, thermal transition, and thermal stability of the PVA/PEC blends were characterized by using wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), and thermal gravity analysis (TGA), respectively. Surface morphology, cross-section and phase structure of the blend membranes were examined by field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). Surface hydrophilicity and swelling behavior of the blend membranes were examined by water contact angle (CA) and swelling tests. Blend membranes were subjected to isopropanol dehydration, and effects of blend composition, feed composition and feed temperature on pervaporation performance are discussed in terms of phase structures of blend membranes. A performance of J = 1.35 kg/m² h, α = 1002, was obtained for blend membrane containing 50 wt% PEC in dehydrating 10 wt% water–isopropanol at 70 °C.     

Electrospun fiber mats of poly(3‐hydroxybutyrate), poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate), and their blends

Electrospinning of poly(3‐hydroxybutyrate) (PHB), poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), and their blends was first carried out in chloroform at 50 °C on a stationary collector. The average diameter of the as‐spun fiber from PHB and PHBV solutions decreased with increasing collection distance and increased with increasing solution concentration and applied electrical potential. In all of the spinning conditions investigated, the average diameter of the as‐spun pure fibers ranged between 1.6 and 8.8 μm. Electrospinning of PHB, PHBV, and their blends was carried out further at a fixed solution concentration of 14% w/v on a homemade rotating cylindrical collector. Well‐aligned, cross‐sectionally round fibers without beads were obtained. The average diameter of the as‐spun pure and blend fibers ranged between 2.3 and 4.0 μm. The as‐spun fiber mats appeared to be more hydrophobic than the corresponding films and much improvement in the tensile strength and the elongation at break was observed for the blend fiber mats over those of the pure fiber ones. Lastly, indirect cytotoxicity evaluation of the as‐spun pure and blend fiber mats with mouse fibroblasts (L929) indicated that these mats posed no threat to the cells. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2923–2933, 2006     

In situ mineralization of hydroxyapatite on electrospun chitosan-based nanofibrous scaffolds

A biocomposite of hydroxyapatite (HAp) with electrospun nanofibrous scaffolds was prepared by using chitosan/polyvinyl alcohol (CS/PVA) and N-carboxyethyl chitosan/PVA (CECS/PVA) electrospun membranes as organic matrix, and HAp was formed in supersaturated CaCl2 and KH2PO4 solution. The influences of carboxylic acid groups in CECS/PVA fibrous scaffold and polyanionic additive poly(acrylic acid) (PAA) in the incubation solution on the crystal distribution of the HAp were investigated. Field-emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), wide-angle X-ray diffraction (WAXD), and Fourier transform infrared (FTIR) were used to characterize the morphology and structure of the deposited mineral phase on the scaffolds. It was found that addition of PAA to the mineral solution and use of matrix with carboxylic acid groups promoted mineral growth and distribution of HAp. MTT testing and SEM imaging from mouse fibroblast (L929) cell culture revealed the attachment and growth of mouse fibroblast on the surface of biocomposite scaffold, and that the cell morphology and viability were satisfactory for the composite to be used in bioapplications.     

基于多巴胺自聚合与表面接枝PHGH制备抗菌纳滤膜

在水溶液中将聚六亚甲基单胍盐酸盐(PHGH)共价接枝在经多巴胺自聚合改性的聚砜膜表面, 制备具有抗菌性能的纳滤膜. 采用全反射红外光谱(ATR-FTIR)、 扫描电子显微镜(SEM)和接触角测试考察膜表面的结构、 形貌和亲水性变化. 探讨PHGH含量对膜的接枝度及分离性能的影响, 并对膜的抗菌性能进行了评价. 结果表明, 经过多巴胺的自聚合和表面接枝PHGH后, 聚砜膜表面形成了具有纳滤分离性能的活性层, 并且膜表面亲水性得到改善. 随着PHGH含量的增大, 膜的纯水通量降低, 而对无机盐和染料的截留性能提高. 接枝后的复合膜具有较高的抗菌性能, 当PHGH含量为3%(质量分数)时, 抗菌率可达98.5%.     

Improving hydrophilicity and protein resistance of poly(vinylidene fluoride) membranes by blending with amphiphilic hyperbranched-star polymer

To endow hydrophobic poly(vinylidene fluoride) (PVDF) membranes with reliable hydrophilicity and protein resistance, an amphiphilic hyperbranched-star polymer (HPE-g-MPEG) with about 12 hydrophilic arms in each molecule was synthesized by grafting methoxy poly(ethylene glycol) (MPEG) to the hyperbranched polyester (HPE) molecule using terephthaloyl chloride (TPC) as the coupling agent and blended with PVDF to fabricate porous membranes via phase inversion process. The chemical composition changes of the membrane surface were confirmed by X-ray photoelectron spectroscopy (XPS), and the membrane morphologies were measured by scanning electron microscopy (SEM). Water contact angle, static protein adsorption, and filtration experiments were used to evaluate the hydrophilicity and anti-fouling properties of the membranes. It was found that MPEG segments of HPE-g-MPEG enriched at the membrane surface substantially, while the water contact angle decreased as low as 49 degrees for the membrane with a HPE-g-MPEG/PVDF ratio of 3/10. More importantly, the water contact angle of the blend membrane changed little after being leached continuously in water at 60 degrees C for 30 days, indicating a quite stable presence of HPE-g-MPEG in the blend membranes. Furthermore, the blend membranes showed lower static protein adsorption, higher water and protein solution fluxes, and better water flux recovery after cleaning than the pure PVDF membrane.     

Adsorption of Lead Ion Using Polymer-Modified Wheat Straw Carboxymethylcellulose

The wheat straw carboxymethylcellulose (WSC), a typical natural polymer, was modified by functional poly(acrylic acid) (PAA) with in situ polymerization, which afforded natural and synthetic polymer composite (WSC/PAA). The polymer (WSC/PAA) was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis techniques. WSC/PAA was used as polymer adsorbent for removing Pb(II) ions in wastewater. The removal rate of 99.8% was obtained when the experimental conditions were chosen as follows: initial Pb(II) ion concentration; 600 mg/L, WSC/PAA concentration; 0.1 g/100 mL, pH; 5.0, contact time; 60 minutes at 20°C. Adsorption dynamics were consistent with pseudo-second-order kinetic model and the isotherm model can meet the Langmuir isotherm.