微流控芯片毛细管电泳柱后衍生激光诱导荧光检测氨基酸

建立了微流控芯片毛细管柱后扩散衍生激光诱导荧光检测氨基酸的方法。利用微流控芯片的二维平面结构特征,在分离通道末端增加支通道,通过扩散法引入柱后衍生试剂,避免了电压引入法对分离通道流型的影响,因而提高了分离效率。考察了支通道长度、衍生试剂液面高度、检测点位置对衍生结果的最优条件,考察了衍生试剂引入方法、催化剂种类、缓冲溶液种类对检测结果的影响。用20 mmol/L硼砂-NaOH(pH=10)溶液作为电泳缓冲溶液,与柱后衍生试剂1.0 mmol/L NDA+8.0 mmol/L 2-ME+35 mmol/L硼砂(pH 10.0)的30%(V/V)甲醇溶液反应,精氨酸、苯丙氨酸、天冬酰胺、脯氨酸、丙氨酸、甘氨酸在不加任何添加剂的情况下可达到基线分离。本法用于板蓝根药材中主要游离氨基酸的分离检测,相对标准偏差小于4.4%(n=5),回收率为92.3%~98.6%。所测板蓝根药材中精氨酸和脯氨酸含量分别为14.97,8.02 mg/g。     

柱前衍生高效液相色谱-荧光检测法测定水稻中7种巯基化合物

建立了水稻中半胱氨酸(Cys)、谷胱甘肽(GSH)和植物螯合肽(phytochelatin, PC:PC₂、PC₃、PC₄、PC₅、PC₆)7种巯基化合物的柱前衍生高效液相色谱-荧光检测分析方法.样品经0.1%三氟乙酸(TFA)(含6.3 mmol/L二乙烯三胺五乙酸(DTPA))超声提取,然后以单溴二胺(mBrB)为衍生剂在pH 8.0的4-羟乙基哌嗪丙磺酸(HEPPS)缓冲溶液中衍生化.采用的色谱分离柱为Agilent Eclipse plus C_l8柱,流动相为0.1%TFA(pH 2.5)和100%乙腈(ACN),梯度洗脱,流速为0.8 mL/min.荧光检测的激发波长和发射波长分别为380 nm和470 nm.结果表明,7种巯基化合物在0.7~100.0 mg/L范围内,峰面积与质量浓度之间的线性关系良好(r²≥0.9991);检出限为0.03~0.20 mg/L;加标回收率为89.26%~99.42%,相对标准偏差为2.05%~5.87%.该方法准确、灵敏度高、重现性好,为水稻中巯基化合物的研究提供了检测手段.     

毛细管电泳柱后衍生激光诱导荧光测定动物组织中卡那霉素类抗生素

采用毛细管电泳柱后衍生激光诱导荧光测定3种卡那霉素类抗生素。研究了在反向电渗流条件下HAc-NaAc缓冲液酸度和浓度对卡那霉素类抗生素分离的影响,研究了Na2B4O7缓冲体系和柱后衍生试剂萘二醛/2-巯基乙醇浓度对检测信号的影响。采用50 mmol/L HAc-NaAc(pH5.0) 0.5 mmol/L CTMAB溶液为分离缓冲液,样品在-15 kV下分离,与柱后衍生试剂1.0 mmol/L NDA 8.0 mmol/L 2-ME 35 mmol/LNa2B4O7(pH10.0)的30%(V/V)甲醇溶液反应,激发诱导荧光检测卡那霉素类抗生素检出限为3.6×10-5~5.2×10-5g/L;本方法用于动物组织中卡那霉素类抗生素残留检测,相对标准偏差小于7.2%;回收率为90.2%~95.3%(n=4)。     

NDA柱前衍生毛细管电泳高灵敏安培检测组胺

本文提出了毛细管电泳 2,3 萘二甲醛(NDA)柱前衍生高灵敏安培检测组胺的新方法,对衍生反应条件和电泳分析条件,包括衍生试剂浓度、衍生溶液的pH值、衍生反应时间、分离介质的pH值、进样时间和分离电压进行了优化,确定衍生溶液pH值为9.0,NDA浓度为5.0×10-4mol/L,CN-浓度为2.5×10-3mol/L时的衍生效果最佳;10mmol/LTris H3PO4(pH5.0)为最佳电泳缓冲液,检测电位为0.7V(vs.SCE)时,组胺检出限达6.8×10-8mol/L(S/N=3),较不衍生测定法灵敏度提高6倍,为测定痕量组胺提供了一个新方法。     

高效液相色谱柱后衍生法测定蜂王浆中的链霉素

采用高效液相色谱柱后衍生法测定蜂王浆中的链霉素。样品用庚烷磺酸钠的酸性溶液进行提取,通过LC-18柱和WCX柱两次固相萃 取达到净化的目的。该方法采用反相C8柱,以0.01 mol/L的庚烷磺酸钠溶液和乙腈为流动相,在碱性条件下以1,2-萘醌-4-磺酸钠溶液 为柱后衍生化试剂,用荧光检测器检测。该方法的线性范围为0.02～0.5 mg/L,相关系数为0.9958,方法的检出限和定量限分别为为 0.005 mg/kg和0.01 mg/kg,回收率范围为84.0%～104.0%,相对标准偏差不大于7.9%。结果表明,该方法能有效地减少蜂王浆中链霉素 检测的假阳性结果,符合目前检测工作的需要。     

柱后衍生-离子对反相高效液相色谱法测定不同基质中亚硫酸盐

应用离子对反相高效液相色谱法测定了不同基质样品中亚硫酸盐的含量.不同样品中的亚硫酸根先后用稀盐酸及山梨醇的混合溶液和乙酸钠及山梨醇的混合溶液提取,并离心分离,所得上清液中的亚硫酸根与甲醛反应生成羟甲基磺酸盐(HMS)而使之固定.用Venusil MP C18柱作固定相,并用三乙基辛烷膦酸铵(pH 5.0)溶液与甲醇以9比1(体积比)混合所得溶液作流动相对试液进行离子对色谱分离.在柱后衍生系统中,分出的HMS先与氢氧化钾作用而重新释出亚硫酸根阴离子,再与5,5-二巯基-2,2-二硝基苯甲酸进行衍生反应,生成5-巯基-2-硝基-苯甲酸,对此产物在450 nm波长处进行分光光度检测,方法的检出限(3S/N)为0.15 mg·L-1.用标准加入法进行回收试验,测得回收率在85.9%～105.2%之间.     

柱前衍生高效液相色谱法测定二乙醇胺脱氢产物亚氨基二乙酸和甘氨酸

以对甲苯磺酰氯(PTSC)为衍生剂,建立了柱前衍生高效液相色谱(HPLC)测定二乙醇胺脱氢产物中亚氨基二乙酸(IDA)和甘氨酸(Gly)含量的分析方法。IDA和Gly与衍生剂在碱性(pH 11)条件下于45℃反应15 min,进行柱前衍生,并利用高效液相色谱-质谱对衍生产物进行定性分析。衍生化产物采用VP-ODS色谱柱(200 mm×4.6 mm,5μm)分离,以0.03 mol/L醋酸铵溶液(pH 5.5)为流动相A、乙腈为流动相B(体积比为87∶13),进行等度洗脱,流速为1 mL/min,并采用配有紫外检测器的高效液相色谱仪测定,检测波长为235 nm。该法在IDA质量浓度为900~2 100 mg/L、Gly质量浓度为20~100 mg/L的范围内线性关系良好,相关系数(R2)均大于0.999。IDA和Gly的检出限(LOD)分别为0.089 7 mg/L和0.026 2 mg/L,加标回收率分别为98.7%~99.3%和98.0%~99.5%,相对标准偏差(RSD)分别为0.89%~1.23%和0.95%~1.11%(n=3)。该法具有反应条件温和、准确性高的特点,可用于工艺生产中IDA和Gly含量的测定。     

在线酸坝富集-毛细管区带电泳法测定槐角中的染料木素

建立了分离测定槐角提取液中染料木素的在线酸坝富集-毛细管区带电泳方法,考察了酸的种类、酸的及浓度、进样/进酸时间比例等因素对堆积效率的影响.实验以20mmol/L硼砂(pH 10.5)作为缓冲溶液,200mmol/L柠檬酸溶液(pH 1.7)作为酸坝,进样、进酸时间分别为180s和45s,在分离电压15kV,检测波长2...     

固相萃取-柱后衍生-反相高效液相色谱法测定脱水蒜粉中的亚硫酸盐

建立了测定脱水蒜粉中亚硫酸盐含量的柱后衍生-反相高效液相色谱分析方法.样品用HCl/甘露醇缓冲溶液提取,经固相萃取(SPE)小柱净化本底并富集待测物后,与甲醛缓冲液反应生成稳定的化合物羟甲基磺酸盐,采用高效液相色谱柱及柱后衍生分离,紫外检测器检测,外标法定量.色谱柱为:Agila Venusil MP-C18(4.6 mm×250 mm),流动相为0.005 mol/L四丁基氢氧化铵离子溶液(pH 4),检测波长为450 nm,结果表明,检出限为2.0 mg/kg,在0.1～10.0 μg/mL范围内线性关系良好,相关系数R2=0.9998,样品添加回收率为86.5%～97.6%,RSD为2.2%～4.0%(n=5).     

高效液相色谱-二极管阵列检测法测定L-丙氨酸与L-氨基丙醇

建立了柱前衍生同时测定L丙-氨酸、L氨-基丙醇的高效液相色谱方法。色谱条件为:Shim-pack VP-ODS柱(150 mm×4.6 mm.ID.,5μm);二极管阵列检测器;流动相为甲醇-磷酸盐缓冲溶液(NaH2PO4浓度为0.02 mol/L,pH 4.00 H3PO4调节)(体积比为30∶70),流速为0.5 mL/m in,检测波长为222 nm,柱温为30℃。L丙-氨酸与L氨-基丙醇的线性范围分别为2.30~178 mg/L和9.3~8690 mg/L;检出限分别为1.1 mg/L和1.6 mg/L;日内、日间测定的相对标准偏差(RSD)分别为0.22%、0.46%和0.02%、0.03%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.