有序介孔碳-固相微萃取涂层的制备及应用

采用溶剂诱导挥发自组装和提拉法制备了以纯有序介孔碳为涂层的新型固相微萃取装置。利用N2吸附-脱附,扫描电镜对涂层材料的性质进行了表征。优化了萃取分析条件,采用顶空-固相微萃取的方法测定自来水中的甲苯和苯乙烯。与商品化涂层相比较,自制涂层具有萃取容量大、使用寿命长的优点。甲苯、苯乙烯含量在0.5~500μg/L内具有良好的线性,检出限为80 ng/L,RSD均小于12%。方法用于测定自来水中的甲苯与苯乙烯,加标回收率为90.2%和93.5%。     

水中氯苯系化合物的固相微萃取

研究了用固相微萃取装置直接从水中萃取氯苯系化合物的条件,试验表明室温下萃取２５～３５ｍｉｎ效果最佳。随着氯苯系化合物含量的增大响应值变化越来越不明显,因此,固相微萃取装置适用于做痕量分析,该法对于氯苯系化合物的应用范围为：１,２,４－三氯苯、１,２,３,５－四氯苯为０～４０ｕｇ／Ｌ、１,２,３,４－四氯苯、１,２,４,５－四氯苯、五氯苯、六氯苯为０～１０ｕｇ／Ｌ。     

固相微萃取的涂层进展

 对固相微萃取 (SPME)的固定相涂层的发展进行了综述。阐述了商品化和非商品化涂层的各自特点 ,并对涂层的选择性和SPME技术作了简单的介绍。     

介孔涂层固相微萃取-高效液相色谱法测定水样中邻苯二羧酸酯化合物

以苯基官能化MCM-41介孔复合体作为固相微萃取(SPME)的吸附涂层, 与高效液相色谱(HPLC)联用测定了不同水样中邻苯二甲酸二甲酯(DMP)、邻苯二甲酸二乙酯(DEP)、邻苯二甲酸二丁酯(DBP)和邻苯二甲酸二辛酯(DOP)的含量, 对SPME的吸附和解吸时间、温度、搅拌速度进行了优化, 线性范围分别为1.19×10-4～119 μg/L、 1.12×10-4～112 μg/L、 1.05×10-4～105 μg/L和9.80×10-5～98 μg/L, 检出限依次为0.030、 0.027、 0.029和0.022 ng/L. 使用该方法测定了多种水样中邻苯二羧酸酯类化合物.     

固相微萃取纤维涂层研究进展

固相微萃取(SPME)是一种成熟的无溶剂萃取技术,因其操作简便、快速、有效、易于自动化使其成为目前应用最广泛的样品前处理技术之一。在食品、法医、生物医学和环境等不同领域有着广泛的应用。而在SPME中,纤维涂层的性质是影响纤维与被测物的适用性及亲和性的重要因素。本文主要介绍最新的固相微萃取涂层技术发展趋势,如碳纳米管、金属有机骨架、离子液体、金属氧化物和分子印迹聚合物。旨在全面概述这些材料的特点、萃取性能等,以及它们作为固相微萃取涂层使用的特点。最后,对固相微萃取涂层材料发展前景进行展望。     

新型固相微萃取涂层的研究进展*

作为一种样品前处理方法的固相微萃取(solid phase microextraction, SPME)技术,具有操作方便,快速,灵敏和无需大量有机溶剂的优点,因此在分离分析方面得到了广泛的应用。涂层是SPME技术的核心部分,其性能决定了SPME的性能和应用范围,因此发展新型涂层一直是SPME研究和应用工作的重点。近年来随着涂层材料制备技术的发展,出现了一些新型涂层。这些新型涂层的出现进一步拓宽SPME技术的应用范围。本文综述了近三年来SPME涂层的研究进展,并着重介绍新型涂层的制备方法和性质。     

选择性固相微萃取涂层的研究进展

固相微萃取装置的核心部分是它的涂层,涂层的种类和厚度是影响分析灵敏度和选择性的最重要因素。具选择性的涂层可增强固相微萃取的分离能力,扩展它的应用范围。本文介绍了固相微萃取的类型,综述了近年来选择性固相微萃取涂层的研究进展,包括溶胶-凝胶涂层、限进介质涂层、分子印迹涂层等涂层的研制及应用。     

固相微萃取活性炭涂层萃取头对水中有机物的定性分析

对自制的固相微萃取（SPME）活性炭（AC）涂层萃取头进行了评价。该涂层富集能力强,对苯系物（BTEX）的富集率达到14．5～19．2倍;热稳定性好,最高使用温度可达290℃;使用寿命长,260℃解吸条件下可反复使用140次以上。其与聚二甲基硅氧烷（PDMS）涂层相比,尽管萃取量略小,但其具有更高精密度和准确度,而且其萃取和解吸平衡时间减少为聚二甲基硅氧烷（PDMS）涂层的一半以上。应用AC涂层SPME法和液-液萃取（LLE）法对松花江水进行了气相色谱-质谱（GC-MS）定性比较分析。两种方法分别检测到50种（主要是挥发和半挥发性的弱极性和非极性）和44种（主要是挥发性差、与正己烷相容性较强）化合物。     

固相流体热萃取-GC/MS分析土壤中氯苯类有机污染物

选用不同配比的正己烷与丙酮混合液、乙腈作为提取溶剂，应用固相流体热萃取仪对土壤中的氯苯类有机物进行提取分离，用气相色谱-质谱进行测定。结果表明：仪器工作条件为提取温度120℃，冷却温度为30℃时，正己烷与丙酮混合提取效果明显优于乙腈。方法线性关系良好，相关系数高于0．99，回收率大于80％，相对标准偏差小于5％，氯苯类物质检测限为2ng／g。     

固相微萃取涂层制备方法研究进展

涂层是固相微萃取技术的核心,近年来出现的各种新型涂层材料和制备技术,进一步拓宽了固相微萃取技术的应用范围.该文介绍了各种新型固相微萃取介质的发展,并综述了各种新型固相微萃取涂层的制备方法,包括直接制备、溶胶-凝胶技术、化学键合与聚合、分子印迹技术、树脂固载技术、电化学沉积等.     

Ordered mesoporous carbon film as an effective solid-phase microextraction coating for determination of benzene series from aqueous media

The present work reports preparation of ordered mesoporous carbon (OMC) film supported on a graphite fiber as a new type of solid-phase microextraction (SPME) fiber for determination of benzene series from aqueous media. The strategy for the supported OMC film preparation was combined dip-coating technology with solvent evaporation-induced self-assembly (EISA) approach. A graphite fiber was immersed in an ethanol solution containing phenolic resin and Pluronic triblock copolymer. Upon solvent evaporation and subsequent pyrolysis under 700 °C, the phenolic resin and the surfactant self-assembled on the surface of the graphite fiber to form smooth OMC film. X-ray diffraction (XRD), transmission electron microscopy (TEM) and nitrogen isothermal adsorption results indicate that the resultant OMC film possesses well-ordered two dimensional hexagonal mesostructure with pore diameters of 4.5 nm and BET surfaces of 630 m²/g. Scanning electron microscopy (SEM) studies show the supported OMC film with thickness at 8.5 μm is continuous and defect-free. The SPME efficiency of the OMC fiber was evaluated by analysis of five benzene series (benzene, toluene, ethylbenzene, p-xylene and m-xylene) from water samples by gas chromatography-flame ionization detection (GC-FID). The analysis results indicate that the prepared OMC fiber has wide linear ranges (0.5–500 μg/L), low detection limits (0.01–0.05 μg/L) and good repeatabilities (4.0–5.8% for one fiber, 2.9–8.7% for fiber-to-fiber). Compared with commercial counterparts, the OMC fiber exhibits improved extraction efficiency for benzene series and PAHs.     

Ordered Mesoporous Carbon Functionalized with Polythionine for Electrocatalytic Application

A polythionine (PTH) functionalized ordered mesoporous carbon (OMC) material (PTH/OMC) was presented. The electrochemistry kinetic characteristics of this material are investigated and compared with pure OMC. The results showed that compared with OMC, PTH/OMC possesses a much higher electron transfer rate. For the application of this material, an electrocatalytic based NADH biosensor was constructed on glassy carbon electrode (GCE). Instead of 0.592 V on bare GCE and 0.206 V on OMC/GCE, the amperometric detection of NADH could be effectively performed on the present biosensor with operation potential be set at 0.0 V. In addition, the sensor showed good reproducibility and stability.     

Anodic Stripping Voltammetric Determination of Lead in Tap Water at an Ordered Mesoporous Carbon/Nafion Composite film Electrode

A sensitive mercury‐free lead (Pb²⁺) sensor has been proposed based on an ordered mesoporous carbon and Nafion composite film (OMC/Nafion) coated glassy carbon electrode. The analysis of Pb²⁺ using anodic stripping voltammetry (ASV) includes two steps. Pb²⁺ ions are firstly reduced and deposited on the electrode surface in a Pb²⁺ solution (10 mL) during a preconcentration step biased at ?1.0 V, followed by a measurement step by differential pulse voltammetry (DPV) within the potential range of ?0.8 to ?0.3 V (scan rate: 20 mV/s, frequency: 20 Hz, amplitude: 50 mV, pulse width: 50 ms). Linear calibration curve was found to be from 20 nM to 2 μM for Pb²⁺ with a sensitivity of 17.4±1.38 μA/μM after a 5‐min of preconcentration. The detection limit was estimated to be around 4.60±0.12 nM at the signal to noise ratio of 3. Reproducibility (RSD%) was found to be 3.0% for a single sensor with eight measurements and 4.3% for five sensors prepared with identical procedures. The practical application of the proposed lead sensor was verified by determination of trace level of Pb²⁺ in tap water sample.     

SPME/GC-MS测定水中痕量二苯氯胂

采用衍生化固相微萃取/气相色谱-质谱(GC-MS),对水中痕量二苯氯胂进行测定,考察了衍生化试剂、萃取纤维、萃取时间等因素对方法灵敏度的影响。测定二苯氯胂的线性范围为1.8~216μg/L,检出限为0.3μg/L(S/N=3),相对标准偏差为7.63%,回收率为95%~103%。     

C18-MCM-41复合介孔材料的合成及其在固相微萃取中的应用

以十八烷基三氯硅烷为偶联剂,采用分步合成法合成了烷基官能化的介孔分子筛C18-MCM-41,用元素分析、傅立叶红外光谱(FT-IR)、X射线衍射(XRD)对合成的复合材料进行表征,结果表明,有机官能化后材料仍保持介孔材料的结构特性。以该材料为固相微萃取涂层材料对水中的多环芳烃(萘、蒽、菲)进行了分析,方法的线性范围分别为5.0~250、0.4~300、0.5~400μg/L,检出限分别为5.0、0.10、0.25μg/L,加标回收率在94.3%~104.4%之间,分析结果令人满意,说明C18-MCM-41介孔材料可作为涂层材料用于固相微萃取。     

Electrochemical Oxidation and Detection of Morphine at Ordered Mesoporous Carbon Modified Glassy Carbon Electrodes

In this work, three ordered mesoporous carbons (OMCs) with different structural parameters were synthesized by a simple variation of the hydrothermal temperature of the silica templates (SBA‐15). X‐ray diffraction and nitrogen adsorption‐desorption results show these OMCs exhibit an ordered 2D hexagonal mesostructure with tunable pore diameter. OMC‐modified glassy carbon electrodes exhibit efficient electrocatalytic reactivity toward oxidation of morphine (MO). The amperometric detection of MO in pH 7.0 phosphate buffered saline at +0.39 V versus Ag/AgCl is the lowest potential reported to‐date. A linear range from 0.2 to 197.6 μM and a detection limit of 0.03 μM MO were obtained.     

Gold Nanoparticles Electrodeposited on Ordered Mesoporous Carbon as an Enhanced Material for Nonenzymatic Hydrogen Peroxide Sensor

A facile and controllable electrodeposition method was developed to directly attach gold nanoparticles (GNPs) on ordered mesoporous carbon (OMC). The GNPs on OMC substrate were characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD) and X‐ray photoelectron spectrometer (XPS), respectively. A nonenzymatic hydrogen peroxide (H₂O₂) sensor was fabricated on GNPs‐OMC/GCE. The sensor demonstrated a fast amperometric response (2.5 s), a wide linear range toward H₂O₂ concentrations between 2.0×10^?6 and 3.92×10^?3 M (R=0.999), and a low detection limit of 0.49 µM (S/N=3). Moreover, it exhibited good reproducibility and long‐term stability. The excellent electrocatalytical activity might be attributed to the synergistic effect of OMC and GNPs.     

Ordered Mesoporous Carbon Paste Electrodes for Electrochemical Sensing and Biosensing

Surface renewable ordered mesoporous carbon paste electrodes (OMCPE) were prepared by mechanical mixing ordered mesoporous carbon (OMC) and mineral oil. Electrochemical behavior of the composite electrode was evaluated and compared with the conventional graphite paste (GPE) and carbon nanotubes paste (CNTPE) electrodes. The OMCPE provided improved electron transfer kinetics and catalytic capabilities in connection with oxidation and/or reduction of different redox systems, such as ferricyanide and some biological species, e. g. ascorbic acid (AA), uric acid (UA), β‐nicotinamide adenine dinucleotide (NADH), dopamine (DA), epinephrine (EP), acetaminophenol (AP) and hydrogen peroxide. The substantial decrease in the over voltage of the hydrogen peroxide oxidation along with the facile incorporation of glucose oxidase (GOD) into the composite matrix allowed us successfully to fabricate a sensitive and selective glucose biosensor. A linear response up to 15 mM glucose was obtained for the OMCPE modified with 10% GOD (w/w) with a detection limit of 0.072 mM. In addition, we also successfully applied the OMCPE to the anodic stripping voltammetric analysis of heavy metal ions with improved sensitivities in comparison with CNTPE and GPE. The excellent experimental results implicate that the new developed paste electrode holds great promise in the design of electrochemical devices, such as sensors and biosensors.     

Bioanalytical Application of the Ordered Mesoporous Carbon Modified Electrodes

An ordered mesoporous carbon modified electrode (OMCE) was prepared by film forming method. The electrochemical behavior of the OMCE was evaluated in connection with the electrochemistry of some electroactive biospecies, such as ascorbic acid (AA), acetaminophenol (AP), cysteine (CySH), dopamine (DA), epinephrine (EP), uric acid (UA), β‐nicotinamide adenine dinucleotide (reduced disodium salt hydrate, NADH), and hydrogen peroxide (H₂O₂) with cyclic voltammetry. Compared with the conventional carbon nanotubes (CNT) and graphite powder (GP) modified electrodes, the OMCE provided the best electrochemical reactivities in all cases associated with decreased over potential, better‐defined peak shape, and higher sensitivity. In addition, the OMC, CNT, and GP modified electrodes were employed as sensitive sensors for H₂O₂ and NADH quantification and as stable platforms for the fabrication of glucose and ethanol biosensors on which the enzymes were immobilized.     

Solid-phase Microextraction of Volatile Polar Compounds in Water

A method was developed for the analysis of volatile polar compounds in a water matrix using open cap vials Solid Phase Micro-Extraction (SPME) and Capillary Gas Chromatography (CGC). Both SPME techniques – direct sampling and headspace – were tested. Optimization of experimental conditions – exposure time, desorption time, with headspace SPME in addition the influence of the temperature and ionic strength of the sample solution on compound sorption, and finally GC response – were investigated. The analytes were extracted by directly immersing the 85 μm polyacrylate fiber in the aqueous sample or in the headspace. The linear range of the preconcentration process and the precision were examined. The amount of polar analytes sorbed on the fiber was determined and was found to be concentration dependent; it amounted to 0.014–0.64% in the concentration range of 0.00425–425 ppm studied in aqueous solution for direct sampling SPME and to 0.011–2.76% for solutions of concentration 0.0425–255 ppm for headspace SPME. The limits of determination were ascertained. Headspace SPME was applied to the analysis of real-life samples.