基于激光剥蚀-电感耦合等离子体质谱技术的生物元素成像分析

生物体内的微量元素具有十分重要的生物功能,也与许多疾病密切相关。现代生物医学的研究亟需能在组织、细胞等不同水平上原位分析生物样品中微量元素的分析方法。本研究建立了激光剥蚀-电感耦合等离子体质谱( LA-ICP-MS)原位分析生物样品的方法。采用线扫描模式和较小的激光输出能量(﹤1 J/cm2),得到了鼠脑切片和金纳米颗粒暴露后单细胞的金属元素成像图。 LA-ICP-MS具有空间分辨率高、检出限好、运行成本较低等优势,有望在生物医学研究中得到更广泛的应用,发挥更重要的作用。     

基于非负分解方法的质谱成像数据特征提取

质谱成像技术能够在同一个实验里无需标记手段而获得样品表面的分子信息及其分布信息,是当前质谱分析的热点.其分析所得数据量大且复杂,使其特征难以提取.多元统计分析方法,特别是主成分分析法已应用于质谱成像数据的压缩和特征提取.然而由于主成分分析常产生负的数据结果,其意义难以解释且不易分解为单一的特征.本研究开发出一种基于非负分解的质谱成像数据提取方法,能够提取单一的分子特征及其在样品上的分布特征,并将多个单一的特征分布通过红、绿、蓝三色叠加显示,获得轮廓直观的综合特征分布.应用本方法对小鼠脑组织切片质谱成像数据进行分析,可直观分解出灰质区域、白质区域和背景区域,相对主成分分析方法更直观且易于解释.应用本方法对在同一个样品靶上的人膀胱癌变组织和其相邻非癌变组织切片质谱成像数据进行分析,癌变与非癌变组织间差异清晰直观.本研究设计的质谱成像软件可由http://www.msimaging.net获取.     

改善液体辅助表面解吸常压化学电离质谱成像空间分辨率的研究

液体辅助表面解吸常压化学电离源(LA-DAPCI)通过电晕放电产生的初级离子和高密度带电液滴,能够对样品表面的中性待测物进行解吸电离,该离子源具有较高的离子化效率,适合复杂基体样品的质谱成像研究.为了满足质谱成像对空间分辨率的要求,本实验通过优化离子源结构、萃取剂组成、萃取剂流量、载气流速、离子源的几何位置参数等实验条件,有效提高了LA-DAPCI源的空间分辨率(从(441±14) μm提高到(58±7)μm).应用LA-DAPCI-MS/MS方法对罗丹明6G进行测定,检测限为0.01 ng/cm2,实验结果令人满意,为其应用于复杂基体样品的质谱成像研究提供科学依据.     

锥束X-CT系统四椭圆法获取全几何参数的研究

锥束CT具有成像质量高、低辐射、操作简单等优点,近几年得到迅速发展。锥束CT几何参数的精确获取是得到高质量图像的关键因素。针对FDK算法要求的条件以及现有的几何参数获取方法,本文提出了一种基于四椭圆快速获取全参数的方法。首先介绍了锥束CT中的关键参数,然后提出了四椭圆全参数获取原理并设计出通用标定模体。本标定模体可用于任何锥角不同的锥束CT系统。通过标定模体在空间的几何关系获取系统中所有几何参数。最后针对该方法进行了实验论证,结果表明,本方法获取的几何参数精度高。综上所述,可证实该算法具有一定的工程实用价值。     

解析电喷雾电离质谱成像技术在植物学研究中的应用

解析电喷雾电离质谱成像(DESI-MSI)是一种常用的质谱成像方法,可在常压下将待测样品引入质谱仪进行检测,并用成像软件构建出被检物质的空间离子分布图像.近年来,DESI-MSI因其常压操作、碎片离子少以及高通量等优势而被广泛应用于医药、工业、食品、生物学等领域.本文综述了近年来DESI-MSI在植物学研究中的应用,包...     

基于离子液体基质的大豆中寡糖成分基质辅助激光解吸电离-质谱成像分析

将离子液体2,5-二羟基苯甲酸丁胺用于改进基质辅助激光解吸电离质谱分析寡糖的定量重复性,并进一步用于大豆和豆叶中寡糖的质谱成像研究.实验中设定正电荷检测模式、激光能量为70%,采用将离子液体2,5-二羟基苯甲酸丁胺甲醇溶液(20%,V/V)直接覆盖样品的简单加基质方法,分析寡糖样品及大豆和豆叶寡糖分布的质谱成像.结果表明,离子液体2,5-二羟基苯甲酸丁胺作为基质,用基质辅助激光解吸电离化质谱分析蔗糖、棉子糖、水苏糖3种寡糖样品,点内重复性RSD<3%,点间重复性RSD<4%,在0.062~1.00 mg/mL 范围内测定的线性相关系数R2≥ 0.996,显示出较好的定量分析潜力.将此基质用于基质辅助激光解吸电离质谱成像分析大豆切片和豆叶表面的二糖、三糖和四糖,得到空间分辨率为150 μm的3种寡糖质谱成像图.3种寡糖在大豆中大致均衡分布,在豆叶的分布均以叶尖为多,并且根据标准曲线和图中的信号强度可以估计其含量.     

激光剥蚀高分辨电感耦合等离子体质谱的表面成像技术在钢板线状缺陷分析中的应用探讨

采用激光剥蚀高分辨电感耦合等离子体质谱(LA-HR-ICPMS)技术得到与钢铁材料表面线状缺陷及缺陷周围正常部位的上万个元素质谱信号,与实际样品位置信息比对,各信号与样品表面原始位置相对应,反映样品表面各成分的二维统计分布信息。用该表面成像技术获得的钢板表面线状缺陷区域元素分布结果与电子探针X射线显微分析（EPMA）、激光剥蚀飞行时间质谱（LA-TOF-MS）分析结果一致。该方法具有激发斑点适中、微损、原位分析、检测限低、二维成像直观显示的特点,解决了传统表面微区分析技术检测限偏高、激发斑点过小的问题,可作为表面线状缺陷异常元素甄别的有力工具,为寻找缺陷成因、改进工艺提供依据。     

类固醇激素的低温等离子体质谱研究

将自行设计和搭建的低温等离子体装置作为离子源,成功地与常压高分辨质谱结合,并将其用于类固醇样品的定性分析.与常规电喷雾质谱相比,用低温等离子体质谱检测类固醇样品具有样品前处理简单、谱图干扰少等优点.对类固醇样品进行了一级质谱以及串联质谱的表征,发现其一级谱图能够体现出类固醇化合物的结构稳定性,而在串联质谱图中则出现了较多的丢水碎片.本工作结合能量计算详细比较分析了典型类固醇样品在碰撞诱导解离(CID)碎裂过程中的丢水过程.另外,通过比较二级质谱的不同以及对其碎裂过程的分析推测,睾酮和去氢表雄酮这对同分异构体得以区分.     

生物组织质谱成像方法的建立及其在微波辐射后大鼠海马组织的蛋白组分析中的应用

通过探讨影响质谱成像实验的主要因素,建立了优化的基于基质辅助激光解吸电离飞行时间质谱的生物组织质谱成像方法。优化的实验条件为:基质为SA;V(乙腈)∶V(水)=1∶1为溶剂,基质浓度20g/L。质谱分析条件:线性正离子模式,激光能量范围为30%~50%,照射200次,采样点间距200μm。将本方法用于高功率微波辐射后大鼠海马的蛋白组分析,获得了正常和微波辐射后大鼠海马组织质谱图像。对照组每张切片获得5902张质谱图,320张组分质谱图像;模型组每张切片获得5993张质谱图,346张质谱图像。自编了数据分析软件计算Hits值分布,Hits值的高低与组分的分布以及量有关系。统计分析表明,差异分子199个,其中上调194个,下调5个。这些差异分子的发现对于明确微波辐射致伤效应和致伤机理的研究具有重要意义。     

浓缩钼同位素的纯化新方法及质量分馏测定

基于三氧化钼易升华的特性,建立了一种纯化浓缩钼同位素试剂的新方法.采用天然丰度掺杂样品Synthetic-Mo对纯化过程中的氧化时间、样品加入量及真空蒸发温度等条件进行了优化.用高分辨等离子体质谱分析了样品中杂质的含量,计算得到纯化后95Mo和98Mo浓缩同位素试剂的纯度分别为99.992%和99.990%.通过多接收器等离子体质谱测定纯化前后样品中钼同位素的组成,δX/95Mo(X=92,94,96,97,98,100)值均在仪器测量精度(0.3‰)范围之内,未观察到明显的质量分馏现象.该方法能够满足校正质谱法对浓缩同位素试剂的要求,对建立高准确度的钼同位素丰度比测量方法具有重要意义.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.