Eu luminescence—a structural probe in BiCa4(PO4)3O, an apatite related phosphate

Eu³⁺ luminescence is studied in apatite-related phosphate BiCa₄(PO₄)₃O. Compositions of the formula Bi_1−xEu_xCa₄(PO₄)₃O [x=0.05, 0.1, 0.3, 0.5, 0.8 and 1.0] are synthesized and they are isostructural with parent BiCa₄(PO₄)₃O. Room temperature photoluminescence shows the various transitions ⁵D₀→⁷F_J(=0,1,2) of Eu³⁺. The emission results of compositions with different Eu³⁺ content show the difference in site occupancy of Eu³⁺ in Bi_1−xEu_xCa₄(PO₄)₃O. The intense ⁵D₀-⁷F₀ line at 574 nm for higher Eu³⁺ content is attributed to the presence of strongly covalent Eu-O bond that is possible by substituting Bi³⁺ in the Ca(2) site. This shows the preferential occupancy of Bi³⁺ in Ca(2) site and this has been attributed to the 6s² lone pair electrons of Bi³⁺. This is further confirmed by comparing the emission results with La_0.95Eu_0.05Ca₄(PO₄)₃O.     

Synthesis, photophysical and oxygen-sensing properties of a novel Eu complex incorporated in mesoporous MCM-41

A novel Eu³⁺ complex of Eu(DPIQ)(TTA)₃ (DPIQ=10H-dipyrido [f,h] indolo [3,2-b] quinoxaline, TTA=2-thenoyltrifluoroacetonate) was synthesized and encapsulated in the mesoporous MCM-41, hoping to explore an oxygen-sensing system based on the long-lived Eu³⁺ emitter. The Eu(DPIQ)(TTA)₃/MCM-41 composites were characterized by infrared spectra (IR), ultraviolet-visible (UV-vis) absorption spectra, small-angle X-ray diffraction (SAXRD), luminescence intensity quenching upon various oxygen concentrations, and fluorescence decay analysis. The results indicated that the composites exhibited the characteristic emission of the Eu³⁺ ion and the fluorescence intensity of ⁵D₀-⁷F₂ obviously decreased with increasing oxygen concentrations. The oxygen sensing properties of the composites with different loading levels of Eu(DPIQ)(TTA)₃ complex were investigated. A sensitivity of 3.04, a short response time of 7 s, and good linearity were obtained for the composites with a loading level of 20 mg/g. These results are the best reported values for optical oxygen-sensing materials based on Eu³⁺ complexes so far.     

A selective fluorescent probe for La and Y based on calix[6]arene

A new fluorescent probe based on calix[6]arene functionalized with three naphthoic acid groups was synthesized and showed selective fluorescence enhancement in the presence of La³⁺ and Y³⁺. In addition, the fluorescence enhancement behaviors depended on the pH values of the solution.     

Characterization of rhodamine B hydroxylamide as a highly selective and sensitive fluorescence probe for copper(II)

Rhodamine B hydroxylamide (1) is characterized as a highly selective and sensitive fluorescence probe for Cu²⁺. Under the optimized conditions, the probe exhibits specific absorbance-on and fluorescence-on responses to Cu²⁺ only. This remarkable property may allow Cu²⁺ to be detected directly in the presence of the other transition metal ions, and such an application has been demonstrated to human serum. The reaction mechanism is also investigated and proposed as that the hydroxylamide group of 1 binds Cu²⁺, and the subsequent complexation of Cu²⁺ displays a high catalytic activity for the hydrolytic cleavage of the amide bond, causing the release of fluorophore (rhodamine B) and thereby the retrievement of absorbance and fluorescence. The recovered fluorescence intensity is proportional to the concentration of Cu²⁺ in the range 1-20 μM. The detection limit for Cu²⁺ is 33 nM (k = 3). The reaction mechanism described here may be useful for developing excellent spectroscopic probes with cleavable active bonds for other analytes.     

A highly selective and ratiometric fluorescence probe for the detection of Hg and pH change based on coumarin in aqueous solution

A simple but highly selective coumarin-based fluorescence probe 1, 8-(1,3-dithiane)-7-hydroxycoumarin was designed and synthesized for both the ratiometric detection of Hg²⁺ and the on–off response to pH change in aqueous solution. The sensor detected Hg²⁺ selectively via Hg²⁺-promoted thioacetal deprotection reaction within five minutes and reflected pH in the range from 7.8 to 11.9 as a result of the equilibrium between weak-fluorescent acid form and strong-fluorescent base form. In addition, the probe has an excellent selectivity towards Hg²⁺ over other competitive metal ions for biomedical and environmental applications. The sensing behavior of our probe was studied by UV–visible absorption spectra and fluorescence spectra.     

A highly selective visual and fluorescent sensor for Pb2+ and Zn2+ and crystal structure of Cu2+ complex based-on a novel single-armed Salamo-type bisoxime

A novel single-armed Salamo-type bisoximes (H₄L) has been designed and synthesised. An obvious colour change from yellow (H₄L) to pale pink (HL-Pb²⁺) which can be visually observed by the naked eye in visible light. H₄L can act as a fluorescent sensor for ratiometric recognition of Zn²⁺ with high selectivity and sensitivity. Crystallographic data of the [Cu(HL)(μ-OAc)Cu] reveals that the two Cu²⁺ ions are both penta-coordinated with square pyramidal geometries, and forms a 2D supramolecular plane structure by hydrogen bonding interactions.     

Unexpected highly selective fluorescence ‘turn-on’ and ratiometric detection of Hg based on fluorescein platform

Methylated fluorescein 1 was explored for fluorescence ‘turn-on’ and ratiometric detection of Hg²⁺ in THF and CH₂Cl₂/MeOH (v/v=9:1), respectively, with unexpected high selectivity. In the presence of Hg²⁺, characteristic structured absorption band of 1 diminished and a new sharp band appeared at 445 nm. Meanwhile a blue shifted and enhanced emission was observed. The ratio of the fluorescence intensity at 559 and 478 nm increased linearly with [Hg²⁺], and solution color changing from yellow to cyan under irradiation at 365 nm in CH₂Cl₂/MeOH. Job plot indicated a 1:1 stoichiometry for 1-Hg²⁺ complex in solution. ¹H NMR titration and IR spectra suggested the coordination of carbonyl group in xanthene moiety to Hg²⁺, affording its spectral behavior. Compound 2 bearing two triazolyl amino esters in place of methyl group showed quite similar behavior to Hg²⁺, which indicated that substituents did not interfere with the specific binding behavior of fluorescein platform. Our work presents a new way to explore xanthene dyes as new chemosensors by modulating electron density on the xanthene ring through non-covalent interactions with carbonyl group.     

A highly selective fluorescent probe for Sn based on a new photochromic diarylethene with a phenol-containing Schiff base unit

A novel diarylethene with a phenol-containing Schiff base unit was successfully synthesized and its multi-responsive photoswitching property was investigated by the stimulation of base/acid and light. The diarylethene showed not only normal photochromism by photoirradiation, but also abnormal photochromism by base and light stimuli. By the stimulation of sodium hydroxide, the absorption maximum of its open-ring isomer showed extraordinarily large redshift of 60 nm, accompanied with a notable color change from colorless to yellow. Subsequent irradiation with 297 nm light further caused a dramatic change in its structure transformation from the deprotonated open-ring isomer to the original closed-ring isomer. Similarly, its deprotonated closed-ring isomer returned to its original open-ring isomer upon irradiation with appropriate visible light. Its deprotonated forms could be restored by the stimulation of hydrochloric acid. Moreover, the diarylethene could be served as a fluorescence probe for recognition of Sn²⁺ with high selectivity.     

Hg and Cu selective detection using a dual channel receptor based on thiopyrylium scaffoldings

2,4,6-Triphenylthiopyrylium functionalized with an aza-oxa-thia macrocycle is able to selectively recognize Hg²⁺ cation by a color change and Cu²⁺ cation by a remarkable significant emission enhancement.     

Determination of melamine in different milk batches using a novel chemosensor based on the luminescence quenching of Ru(II) carbonyl complex

A novel, simple, sensitive and precise spectrofluorimetric method was developed for measuring the melamine concentration in different milk batch samples. The method was based upon measuring the quenching of the luminescence intensity of the produced yellow colored ruthenium^(II) carbonyl complex of the general formula [Ru(CO)₂(L)] (where L = anion of tetradentate Schiff base). The Ru^(II) complex exhibited characteristic luminescence band in the visible region. The remarkable quenching of the luminescence intensity of [Ru(CO)₂(L)] complex by various concentrations of melamine was successfully used as a chemosensor for the assessment of melamine in different milk samples at λ_ex = 400 nm and pH 7.4 in DMSO with a linear dynamic range 1.0 × 10⁻⁶ to 3.0 × 10⁻⁹ mol L⁻¹ and lower detection limit (LOD) and quantification detection limit (QOD) of 3.3 × 10⁻¹⁰ and 1.0 × 10⁻⁹ mol L⁻¹, respectively.     

An efficient and selective flourescent chemical sensor based on 5-(8-hydroxy-2-quinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane as a new fluoroionophore for determination of iron(III) ions. A novel probe for iron speciation

A novel fluorescent chemical sensor for the highly sensitive and selective determination of Fe³⁺ ions in aqueous solutions is prepared. The iron sensing system was prepared by incorporating 5-(8-hydroxy-2-quinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane (L) as a neutral Fe³⁺-selective fluoroionophore in the plasticized PVC membrane containing sodium tetraphenylborate as a liphophilic anionic additive. The response of the sensor is based on the strong fluorescence quenching of L by Fe³⁺ ions. At pH 5.5, the proposed sensor displays a calibration curve over a wide concentration range from 6.0 × 10⁻⁴ to 1.0 × 10⁻⁷ M, with a relatively fast response time of less than 2 min. In addition to a high stability and reproducibility, the sensor shows a unique selectivity toward Fe³⁺ ion with respect to common coexisting cations. The proposed fluorescence optode was applied to the determination of iron(III) content of straw of rice, spinach and different water samples. The fluorescent sensor was also used as a novel probe for Fe³⁺/Fe²⁺ speciation in aqueous solution.     

Visual Detection of Triethylamine and a Dual Input/Output Logic Gate Based on a Eu3+-Complex

A series of Ln³⁺-metal centered complexes, Ln(TTA)₃(DPPI) (Ln = La, 1; Ln = Eu, 2; Ln = Tb, 3; or Ln = Gd, 4) [(DPPI = N-(4-(1H-imidazo [4,5-f][1,10]phenanthrolin-2-yl)phenyl)-N-phenylbenzenamine) and (TTA = 2-Thenoyltrifluoroacetone)] have been synthesized and characterized. Among which, the Eu³⁺-complex shows efficient purity red luminescence in dimethylsulfoxide (DMSO) solution, with a Commission International De L’ Eclairage (CIE) coordinate at x = 0.638, y = 0.323 and Φ_Eu^L = 38.9%. Interestingly, increasing the amounts of triethylamine (TEA) in the solution regulates the energy transfer between the ligand and the Eu³⁺-metal center, which further leads to the luminescence color changing from red to white, and then bluish-green depending on the different excitation wavelengths. Based on this, we have designed the IMPLICATION logic gate for TEA recognition by applying the amounts of TEA and the excitation wavelengths as the dual input signal, which makes this Eu³⁺-complex a promising candidate for TEA-sensing optical sensors.     

Spectral Hole-Burning in Femtosecond Laser-Irradiated Eu<Superscript>3+</Superscript>-Doped Aluminosilicate Glasses

We studied the persistent spectral hole-burning (PSHB) of the Eu³⁺-doped Al₂O₃-SiO₂ glasses, prepared by a sol–gel process, exposed to femtosecond laser pulses. The spectral holes were burned in the excitation spectra of the ⁷F₀⁵D₀ transition of Eu³⁺ ion. The depth and width of the burned holes were 15% and 2.5 cm^–1 fwhm at 7 K, respectively. The burned hole is stable up to room temperature. Fluorescence line narrowing spectra showed that Eu³⁺ ions were located in two different sites.     

Voltammetric assay of rifampicin and isoniazid drugs, separately and combined in bulk, pharmaceutical formulations and human serum at a carbon paste electrode

The electrochemical oxidation of both the rifampicin (RIF) and isoniazid (INH) drugs has been investigated by cyclic and square-wave voltammetry in Britton-Robinson buffers (pH 2-11) at a carbon paste electrode. The oxidation of rifampicin generated a well-defined pH-dependent quasi-reversible anodic-cathodic peak couple corresponding to a mechanism involving the transfer of two electrons/two protons, typical to that of hydroquinones, in addition to an irreversible anodic peak at a more positive potential which may be due to the oxidation of phenolic hydroxyl group. For the isoniazid, an irreversible anodic peak was observed, which may be attributed to the irreversible oxidation of the amide moiety of the drug molecule. A validated square-wave adsorptive anodic stripping voltammetric procedure was described to assay the two drugs separately or combined in pharmaceutical formulations and human serum. The recoveries of RIF in rimactane^® capsules (300 mg RIF) and INH in isocid^® tablets (200 mg INH) were found to be 98.57±0.81% and 100.57±0.74%, respectively. The proposed procedure was also successfully applied to simultaneous assay of rifampicin and isoniazid drugs combined in rimactazid tablets (150 mg INH+300 mg RIF) with recoveries of 98.79±0.97% and 99.54±0.74%, respectively, without the necessity for sample pretreatment or time-consuming extraction steps prior to the analysis. The results were favorably compared to those obtained by the reported USP method. Moreover, the proposed procedure was successfully applied to simultaneous assay of both drugs in human serum samples with limits of detection and quantitation of 5×10⁻⁸ and 1.7×10⁻⁷ M for RIF and 6.1×10⁻⁸ and 2×10⁻⁷ M for INH.     

Dual optical detection of a novel selective mercury sensor based on 7-nitrobenzo-2-oxa-1,3-diazolyl subunits

A novel macromolecule based on 2-[3-(2-aminoethylthio)propylthio]ethanamine covalently bound to two 7-nitrobenzo-2-oxa-1,3-diazolyl moieties was prepared as a fluoroionophore and a chromophore for the selective optical detection of Hg²⁺. The sensor was prepared in two steps and its fluoroionophoric and chromophoric properties toward various transition metal, alkali, and alkali earth cations were investigated. Compound 4 selectively binds Hg²⁺, and the binding is indicated by both fluorescence quenching and a chromogenic change which can be detected by the naked eye. In an 80:20 acetonitrile/water solvent mixture, 4 acts as an ON-OFF fluorescence switch upon Hg²⁺ binding, exhibiting efficient quenching and a detection limit of 10⁻⁷ M or 20 ppb.     

A Recyclable bi‐functional Luminescent Zinc (II) metal–organic framework as highly selective and sensitive sensing probe for nitroaromatic explosives and Fe3+ ions

By introducing carboxyl tag to the aromatic ligands system and borrowing the organic template open framework idea, a stable fluorescent Zn metal–organic framework was successfully prepared through a rigid ligand H₆L (3,5‐bis‐(3‐carboxyphenoxy)benzoic acid) under hydrothermal conditions. The selectivity and sensitivity of the Zn‐MOF to metal ions and nitro‐aromatic compounds (NACs) were investigated by fluorescence quenching. And the Zn‐MOF showed a high sensibility of nitro‐aromatic compounds (NACs) and Fe³⁺ ions, especially for 4‐(4‐nitropheny lazo) resorcinol (NPLR). More importantly, the detection limit of the Zn‐MOF for detecting NPLR solution was found to be 1.71 ppb. Moreover, this sensor is remarkable recyclable and is promisingly applied for rapid, on‐site and sensing of explosive residuals.     

Separation of tryptic peptides of native and glycated BSA using open‐tubular CEC with salophene–lanthanide–Zn2+ complex as stationary phase

Open‐tubular CEC (OT‐CEC) with a new stationary phase, salophene–lanthanide–Zn²⁺ complex, has been applied to the separation of tryptic peptides of native BSA and BSA glycated by glucose and ribose. Glycation of proteins (non‐enzymatic modification by sugars) significantly affects their properties and it is of great importance from a physiological point of view. Separation of tryptic peptides of glycated BSA by CZE was poor because of their strong adsorption to the bare fused silica capillary. An improved separation of tryptic peptides of both native and glycated BSA was achieved by OT‐CEC in the fused silica capillary non‐covalently coated with salophene–lanthanide–Zn²⁺ complex, which suppressed the adsorption of peptides to the capillary and via specific interactions with some (glyco)peptides enhanced selectivity of the separation. Significant differences have been found in OT‐CEC analyses of tryptic hydrolysates of native and glycated BSA. In OT‐CEC‐UV profile of tryptic peptides of native BSA, 44 peaks could be resolved, whereas a reduced number of 38 peaks were observed in the profile of tryptic peptides of glucose‐glycated BSA and only 30 peaks were found in the case of ribose‐glycated BSA. The developed OT‐CEC can be potentially used for monitoring of protein glycation.     

A highly sensitive coupling technique for the determination of trace quercetin based on solid substrate room temperature phosphorimetry and poly (vinyl alcohol) complex imprinting

Al³⁺ could react with quercetin (Q) to form [AlQ]³⁺ complex which could be used as a template for the preparation of poly (vinyl alcohol)–[AlQ]³⁺ complex imprinting (PVA-C-I). The [AlQ]³⁺ not only had good matching ability and selectivity with the cavity of PVA-C-I, but also could react with the fluorescein isothiocyanate anion (FITC⁻) on the outside of cavity by electrostatic interaction to form ion-association complex [AlQ]³⁺·[(FITC)⁻]₃. The ion-association complex could emit strong and stable room temperature phosphorescence (RTP) on polyamide membrane (PAM) and the ΔI_p of the system had linear relationship with the content of Q, showing the highly selective identification of PVA-C-I to Q. Thus, a new coupling technique for the determination of trace Q based on solid substrate room temperature phosphorimetry and poly (vinyl alcohol) complex imprinting (PVA-C-I-SSRTP) was established. The linear range and limit of detection (LOD) of this method were 0.010–2.0 (×10⁻¹² g mL⁻¹) and 2.0 × 10⁻¹⁴ g mL⁻¹, respectively, showing wide linear range and high sensitivity of PVA-C-I-SSRTP. This method was used to determine the content of Q in waste water, and the results are consistent with those by spectrofluorimetry. Meanwhile, the mechanism for the determination of Q using PVA-C-I-SSRTP was also discussed.     

Synthesis of Gd3PO7:Eu nanospheres via a facile combustion method and optical properties

Eu³⁺-doped Gd₃PO₇ nanospheres with an average diameter of ∼300 nm and a narrow size distribution have been prepared by a facile combustion method and structurally characterized by X-ray diffraction and field emission scanning electron microscopy. The luminescent properties were systemically studied by the measurement of excitation/emission spectra, and emission spectra under different temperatures, as well as by photostability. The strong red-emission intensity peaking at 614 nm originates the ⁵D₀→⁷F₂ transition and is observed under 254-nm irradiation, indicating that Eu³⁺ ions in Gd₃PO₇ mainly occupied non-centrosymmetry sites. The CIE1931 XY chromaticity coordinates of Gd₃PO₇:Eu³⁺ nanospheres are (x=0.654, y=0.345) in the red area, which is near the National Television Standard Committee standard chromaticity coordinates for red. Thus, Gd₃PO₇:Eu³⁺ nanospheres may be potential red-emitting phosphors for PDP and Xe-based mercury-free lamps.     

Synthesis and photophysical properties of novel organic–inorganic hybrid materials covalently linked to a europium complex

A novel sol–gel derived hybrid material (classed as Eu-DBM-Si) covalently grafted with Eu(DBM-OH)₃·2H₂O (where DBM-OH = o-hydroxydibenzoylmethane) was prepared through the primary β-diketone ligand DBM-OH. All the synthesized ligands were characterized by ¹H NMR, elemental analyses and Fourier transform infrared spectra (FTIR). The resultant Eu-DBM-Si material exhibited good transparent and homogenous property. Compared to the Eu-DBM hybrid prepared by physically doped silicon dioxide with Eu(DBM-OH)₃·2H₂O, the Eu-DBM-Si hybrid presented more efficient ligand-to-Eu³⁺ energy transfer and a significant improvement in the measured emission quantum yield. Furthermore, the photophysical properties of these hybrid materials, such as the photoluminescence (PL) spectra, PL intensities, symmetry properties, lifetime decays, and Judd-Ofelt parameters were also investigated in detail.